From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: mark.cave-ayland@ilande.co.uk
Subject: [PATCH] esp: store lun coming from the MESSAGE OUT phase
Date: Fri, 11 Jun 2021 13:57:56 +0200 [thread overview]
Message-ID: <20210611115756.662367-1-pbonzini@redhat.com> (raw)
The LUN is selected with an IDENTIFY message, and persists
until the next message out phase. Instead of passing it to
do_busid_cmd, store it in ESPState. Because do_cmd can simply
skip the message out phase if cmdfifo_cdb_offset is zero, it
can now be used for the S without ATN cases as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/scsi/esp.c | 39 +++++++++++++++++++++++----------------
hw/scsi/trace-events | 3 ++-
include/hw/scsi/esp.h | 1 +
3 files changed, 26 insertions(+), 17 deletions(-)
diff --git a/hw/scsi/esp.c b/hw/scsi/esp.c
index 3e6f4094fc..1f1c02de79 100644
--- a/hw/scsi/esp.c
+++ b/hw/scsi/esp.c
@@ -221,7 +221,7 @@ static int esp_select(ESPState *s)
/*
* Note that we deliberately don't raise the IRQ here: this will be done
- * either in do_busid_cmd() for DATA OUT transfers or by the deferred
+ * either in do_command_phase() for DATA OUT transfers or by the deferred
* IRQ mechanism in esp_transfer_data() for DATA IN transfers
*/
s->rregs[ESP_RINTR] |= INTR_FC;
@@ -272,24 +272,22 @@ static uint32_t get_cmd(ESPState *s, uint32_t maxlen)
return dmalen;
}
-static void do_busid_cmd(ESPState *s, uint8_t busid)
+static void do_command_phase(ESPState *s)
{
uint32_t cmdlen;
int32_t datalen;
- int lun;
SCSIDevice *current_lun;
uint8_t buf[ESP_CMDFIFO_SZ];
- trace_esp_do_busid_cmd(busid);
- lun = busid & 7;
+ trace_esp_do_command_phase(s->lun);
cmdlen = fifo8_num_used(&s->cmdfifo);
if (!cmdlen || !s->current_dev) {
return;
}
esp_fifo_pop_buf(&s->cmdfifo, buf, cmdlen);
- current_lun = scsi_device_find(&s->bus, 0, s->current_dev->id, lun);
- s->current_req = scsi_req_new(current_lun, 0, lun, buf, s);
+ current_lun = scsi_device_find(&s->bus, 0, s->current_dev->id, s->lun);
+ s->current_req = scsi_req_new(current_lun, 0, s->lun, buf, s);
datalen = scsi_req_enqueue(s->current_req);
s->ti_size = datalen;
fifo8_reset(&s->cmdfifo);
@@ -316,21 +314,29 @@ static void do_busid_cmd(ESPState *s, uint8_t busid)
}
}
-static void do_cmd(ESPState *s)
+static void do_message_phase(ESPState *s)
{
- uint8_t busid = esp_fifo_pop(&s->cmdfifo);
- int len;
+ if (s->cmdfifo_cdb_offset) {
+ uint8_t message = esp_fifo_pop(&s->cmdfifo);
- s->cmdfifo_cdb_offset--;
+ trace_esp_do_identify(message);
+ s->lun = message & 7;
+ s->cmdfifo_cdb_offset--;
+ }
/* Ignore extended messages for now */
if (s->cmdfifo_cdb_offset) {
- len = MIN(s->cmdfifo_cdb_offset, fifo8_num_used(&s->cmdfifo));
+ int len = MIN(s->cmdfifo_cdb_offset, fifo8_num_used(&s->cmdfifo));
esp_fifo_pop_buf(&s->cmdfifo, NULL, len);
s->cmdfifo_cdb_offset = 0;
}
+}
- do_busid_cmd(s, busid);
+static void do_cmd(ESPState *s)
+{
+ do_message_phase(s);
+ assert(s->cmdfifo_cdb_offset == 0);
+ do_command_phase(s);
}
static void satn_pdma_cb(ESPState *s)
@@ -369,7 +375,7 @@ static void s_without_satn_pdma_cb(ESPState *s)
if (!esp_get_tc(s) && !fifo8_is_empty(&s->cmdfifo)) {
s->cmdfifo_cdb_offset = 0;
s->do_cmd = 0;
- do_busid_cmd(s, 0);
+ do_cmd(s);
}
}
@@ -386,7 +392,7 @@ static void handle_s_without_atn(ESPState *s)
if (cmdlen > 0) {
s->cmdfifo_cdb_offset = 0;
s->do_cmd = 0;
- do_busid_cmd(s, 0);
+ do_cmd(s);
} else if (cmdlen == 0) {
s->do_cmd = 1;
/* Target present, but no cmd yet - switch to command phase */
@@ -1168,7 +1174,7 @@ static int esp_post_load(void *opaque, int version_id)
const VMStateDescription vmstate_esp = {
.name = "esp",
- .version_id = 5,
+ .version_id = 6,
.minimum_version_id = 3,
.post_load = esp_post_load,
.fields = (VMStateField[]) {
@@ -1197,6 +1203,7 @@ const VMStateDescription vmstate_esp = {
VMSTATE_FIFO8_TEST(fifo, ESPState, esp_is_version_5),
VMSTATE_FIFO8_TEST(cmdfifo, ESPState, esp_is_version_5),
VMSTATE_UINT8_TEST(ti_cmd, ESPState, esp_is_version_5),
+ VMSTATE_UINT8_V(lun, ESPState, 6),
VMSTATE_END_OF_LIST()
},
};
diff --git a/hw/scsi/trace-events b/hw/scsi/trace-events
index 1a27e141ae..92d5b40f89 100644
--- a/hw/scsi/trace-events
+++ b/hw/scsi/trace-events
@@ -166,7 +166,8 @@ esp_dma_disable(void) "Lower enable"
esp_pdma_read(int size) "pDMA read %u bytes"
esp_pdma_write(int size) "pDMA write %u bytes"
esp_get_cmd(uint32_t dmalen, int target) "len %d target %d"
-esp_do_busid_cmd(uint8_t busid) "busid 0x%x"
+esp_do_command_phase(uint8_t busid) "busid 0x%x"
+esp_do_identify(uint8_t byte) "0x%x"
esp_handle_satn_stop(uint32_t cmdlen) "cmdlen %d"
esp_write_response(uint32_t status) "Transfer status (status=%d)"
esp_do_dma(uint32_t cmdlen, uint32_t len) "command len %d + %d"
diff --git a/include/hw/scsi/esp.h b/include/hw/scsi/esp.h
index aada3680b7..b1ec27612f 100644
--- a/include/hw/scsi/esp.h
+++ b/include/hw/scsi/esp.h
@@ -37,6 +37,7 @@ struct ESPState {
SCSIRequest *current_req;
Fifo8 cmdfifo;
uint8_t cmdfifo_cdb_offset;
+ uint8_t lun;
uint32_t do_cmd;
bool data_in_ready;
--
2.31.1
next reply other threads:[~2021-06-11 11:58 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-11 11:57 Paolo Bonzini [this message]
2021-06-13 10:40 ` [PATCH] esp: store lun coming from the MESSAGE OUT phase Mark Cave-Ayland
2021-06-14 8:16 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210611115756.662367-1-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=mark.cave-ayland@ilande.co.uk \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).