qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Eduardo Habkost <ehabkost@redhat.com>,
	David Hildenbrand <david@redhat.com>,
	Igor Kotrasinski <i.kotrasinsk@partner.samsung.com>,
	Richard Henderson <richard.henderson@linaro.org>,
	Peter Xu <peterx@redhat.com>,
	Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Subject: [PULL 19/45] util/mmap-alloc: Factor out reserving of a memory region to mmap_reserve()
Date: Thu, 17 Jun 2021 11:31:08 +0200	[thread overview]
Message-ID: <20210617093134.900014-20-pbonzini@redhat.com> (raw)
In-Reply-To: <20210617093134.900014-1-pbonzini@redhat.com>

From: David Hildenbrand <david@redhat.com>

We want to reserve a memory region without actually populating memory.
Let's factor that out.

Reviewed-by: Igor Kotrasinski <i.kotrasinsk@partner.samsung.com>
Acked-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-3-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 util/mmap-alloc.c | 58 +++++++++++++++++++++++++++--------------------
 1 file changed, 33 insertions(+), 25 deletions(-)

diff --git a/util/mmap-alloc.c b/util/mmap-alloc.c
index 24854064b4..223d66219c 100644
--- a/util/mmap-alloc.c
+++ b/util/mmap-alloc.c
@@ -82,6 +82,38 @@ size_t qemu_mempath_getpagesize(const char *mem_path)
     return qemu_real_host_page_size;
 }
 
+/*
+ * Reserve a new memory region of the requested size to be used for mapping
+ * from the given fd (if any).
+ */
+static void *mmap_reserve(size_t size, int fd)
+{
+    int flags = MAP_PRIVATE;
+
+#if defined(__powerpc64__) && defined(__linux__)
+    /*
+     * On ppc64 mappings in the same segment (aka slice) must share the same
+     * page size. Since we will be re-allocating part of this segment
+     * from the supplied fd, we should make sure to use the same page size, to
+     * this end we mmap the supplied fd.  In this case, set MAP_NORESERVE to
+     * avoid allocating backing store memory.
+     * We do this unless we are using the system page size, in which case
+     * anonymous memory is OK.
+     */
+    if (fd == -1 || qemu_fd_getpagesize(fd) == qemu_real_host_page_size) {
+        fd = -1;
+        flags |= MAP_ANONYMOUS;
+    } else {
+        flags |= MAP_NORESERVE;
+    }
+#else
+    fd = -1;
+    flags |= MAP_ANONYMOUS;
+#endif
+
+    return mmap(0, size, PROT_NONE, flags, fd, 0);
+}
+
 static inline size_t mmap_guard_pagesize(int fd)
 {
 #if defined(__powerpc64__) && defined(__linux__)
@@ -104,7 +136,6 @@ void *qemu_ram_mmap(int fd,
     int prot;
     int flags;
     int map_sync_flags = 0;
-    int guardfd;
     size_t offset;
     size_t total;
     void *guardptr;
@@ -116,30 +147,7 @@ void *qemu_ram_mmap(int fd,
      */
     total = size + align;
 
-#if defined(__powerpc64__) && defined(__linux__)
-    /* On ppc64 mappings in the same segment (aka slice) must share the same
-     * page size. Since we will be re-allocating part of this segment
-     * from the supplied fd, we should make sure to use the same page size, to
-     * this end we mmap the supplied fd.  In this case, set MAP_NORESERVE to
-     * avoid allocating backing store memory.
-     * We do this unless we are using the system page size, in which case
-     * anonymous memory is OK.
-     */
-    flags = MAP_PRIVATE;
-    if (fd == -1 || guard_pagesize == qemu_real_host_page_size) {
-        guardfd = -1;
-        flags |= MAP_ANONYMOUS;
-    } else {
-        guardfd = fd;
-        flags |= MAP_NORESERVE;
-    }
-#else
-    guardfd = -1;
-    flags = MAP_PRIVATE | MAP_ANONYMOUS;
-#endif
-
-    guardptr = mmap(0, total, PROT_NONE, flags, guardfd, 0);
-
+    guardptr = mmap_reserve(total, fd);
     if (guardptr == MAP_FAILED) {
         return MAP_FAILED;
     }
-- 
2.31.1




  parent reply	other threads:[~2021-06-17  9:42 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-17  9:30 [PULL 00/45] Memory, i386, compilation, bugfix changes for 2021-06-17 Paolo Bonzini
2021-06-17  9:30 ` [PULL 01/45] vnc: avoid deprecation warnings for SASL on OS X Paolo Bonzini
2021-06-17  9:30 ` [PULL 02/45] vl: Fix an assert failure in error path Paolo Bonzini
2021-06-17  9:30 ` [PULL 03/45] qemu-config: use qemu_opts_from_qdict Paolo Bonzini
2021-06-17  9:30 ` [PULL 04/45] block/scsi: correctly emulate the VPD block limits page Paolo Bonzini
2021-06-17  9:30 ` [PULL 05/45] runstate: Initialize Error * to NULL Paolo Bonzini
2021-06-17  9:30 ` [PULL 06/45] esp: only assert INTR_DC interrupt flag if selection fails Paolo Bonzini
2021-06-17  9:30 ` [PULL 07/45] esp: only set ESP_RSEQ at the start of the select sequence Paolo Bonzini
2021-06-17  9:30 ` [PULL 08/45] esp: allow non-DMA callback in esp_transfer_data() initial transfer Paolo Bonzini
2021-06-17  9:30 ` [PULL 09/45] esp: handle non-DMA transfers from the target one byte at a time Paolo Bonzini
2021-06-17  9:30 ` [PULL 10/45] esp: ensure PDMA write transfers are flushed from the FIFO to the target immediately Paolo Bonzini
2021-06-17  9:31 ` [PULL 11/45] esp: revert 75ef849696 "esp: correctly fill bus id with requested lun" Paolo Bonzini
2021-06-17  9:31 ` [PULL 12/45] esp: correctly accumulate extended messages for PDMA Paolo Bonzini
2021-06-17  9:31 ` [PULL 13/45] esp: fix migration version check in esp_is_version_5() Paolo Bonzini
2021-06-17  9:31 ` [PULL 14/45] esp: store lun coming from the MESSAGE OUT phase Paolo Bonzini
2021-06-17  9:31 ` [PULL 15/45] softmmu/physmem: Mark shared anonymous memory RAM_SHARED Paolo Bonzini
2021-06-17  9:31 ` [PULL 16/45] softmmu/physmem: Fix ram_block_discard_range() to handle shared anonymous memory Paolo Bonzini
2021-06-17  9:31 ` [PULL 17/45] softmmu/physmem: Fix qemu_ram_remap() " Paolo Bonzini
2021-06-17  9:31 ` [PULL 18/45] util/mmap-alloc: Factor out calculation of the pagesize for the guard page Paolo Bonzini
2021-06-17  9:31 ` Paolo Bonzini [this message]
2021-06-17  9:31 ` [PULL 20/45] util/mmap-alloc: Factor out activating of memory to mmap_activate() Paolo Bonzini
2021-06-17  9:31 ` [PULL 21/45] softmmu/memory: Pass ram_flags to qemu_ram_alloc_from_fd() Paolo Bonzini
2021-06-17  9:31 ` [PULL 22/45] softmmu/memory: Pass ram_flags to memory_region_init_ram_shared_nomigrate() Paolo Bonzini
2021-06-17  9:31 ` [PULL 23/45] softmmu/memory: Pass ram_flags to qemu_ram_alloc() and qemu_ram_alloc_internal() Paolo Bonzini
2021-06-17  9:31 ` [PULL 24/45] util/mmap-alloc: Pass flags instead of separate bools to qemu_ram_mmap() Paolo Bonzini
2021-06-17  9:31 ` [PULL 25/45] memory: Introduce RAM_NORESERVE and wire it up in qemu_ram_mmap() Paolo Bonzini
2021-06-17  9:31 ` [PULL 26/45] util/mmap-alloc: Support RAM_NORESERVE via MAP_NORESERVE under Linux Paolo Bonzini
2021-06-17  9:31 ` [PULL 27/45] hostmem: Wire up RAM_NORESERVE via "reserve" property Paolo Bonzini
2021-06-17  9:31 ` [PULL 28/45] qmp: Clarify memory backend properties returned via query-memdev Paolo Bonzini
2021-06-17  9:31 ` [PULL 29/45] qmp: Include "share" property of memory backends Paolo Bonzini
2021-06-17  9:31 ` [PULL 30/45] hmp: Print "share" property of memory backends with "info memdev" Paolo Bonzini
2021-06-17  9:31 ` [PULL 31/45] qmp: Include "reserve" property of memory backends Paolo Bonzini
2021-06-17  9:31 ` [PULL 32/45] hmp: Print "reserve" property of memory backends with "info memdev" Paolo Bonzini
2021-06-17  9:31 ` [PULL 33/45] configure: map x32 to cpu_family x86_64 for meson Paolo Bonzini
2021-06-17  9:31 ` [PULL 34/45] target/i386: Refactored intercept checks into cpu_svm_has_intercept Paolo Bonzini
2021-06-17  9:31 ` [PULL 35/45] target/i386: Added consistency checks for VMRUN intercept and ASID Paolo Bonzini
2021-06-17  9:31 ` [PULL 36/45] target/i386: Added consistency checks for CR0 Paolo Bonzini
2021-06-17  9:31 ` [PULL 37/45] target/i386: Added Intercept CR0 writes check Paolo Bonzini
2021-06-17  9:31 ` [PULL 38/45] configure: Use -std=gnu11 Paolo Bonzini
2021-06-17  9:31 ` [PULL 39/45] softfloat: Use _Generic instead of QEMU_GENERIC Paolo Bonzini
2021-06-17  9:31 ` [PULL 40/45] util: Use real functions for thread-posix QemuRecMutex Paolo Bonzini
2021-06-17  9:31 ` [PULL 41/45] util: Pass file+line to qemu_rec_mutex_unlock_impl Paolo Bonzini
2021-06-17  9:31 ` [PULL 42/45] util: Use unique type for QemuRecMutex in thread-posix.h Paolo Bonzini
2021-06-17  9:31 ` [PULL 43/45] include/qemu/lockable: Use _Generic instead of QEMU_GENERIC Paolo Bonzini
2021-06-17  9:31 ` [PULL 44/45] qemu/compiler: Remove QEMU_GENERIC Paolo Bonzini
2021-06-17  9:31 ` [PULL 45/45] configure: Remove probe for _Static_assert Paolo Bonzini
2021-06-17 10:21 ` [PULL 00/45] Memory, i386, compilation, bugfix changes for 2021-06-17 no-reply
2021-06-18  8:53 ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210617093134.900014-20-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=david@redhat.com \
    --cc=ehabkost@redhat.com \
    --cc=i.kotrasinsk@partner.samsung.com \
    --cc=muriloo@linux.ibm.com \
    --cc=peterx@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).