From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, Jason Thorpe <thorpej@me.com>
Subject: [PULL 1/5] hw/alpha: Set minimum PCI device ID to 1 to match Clipper IRQ mappings
Date: Mon, 28 Jun 2021 07:35:47 -0700 [thread overview]
Message-ID: <20210628143551.2870006-2-richard.henderson@linaro.org> (raw)
In-Reply-To: <20210628143551.2870006-1-richard.henderson@linaro.org>
From: Jason Thorpe <thorpej@me.com>
Since we are emulating a Clipper device topology, we need to set the
minimum PCI device ID to 1, as there is no IRQ mapping for a device
at ID 0 (see sys_dp264.c:clipper_map_irq()).
- Add a 'devfn_min' argument to typhoon_init(). Pass that argument
along to pci_register_root_bus().
- In clipper_init(), pass PCI_DEVFN(1, 0) as the minimum PCI device
ID/function.
Signed-off-by: Jason Thorpe <thorpej@me.com>
Message-Id: <20210613211549.18094-3-thorpej@me.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
hw/alpha/alpha_sys.h | 2 +-
hw/alpha/dp264.c | 7 +++++--
hw/alpha/typhoon.c | 5 +++--
3 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/hw/alpha/alpha_sys.h b/hw/alpha/alpha_sys.h
index e2c02e2bbe..4835b3d5ee 100644
--- a/hw/alpha/alpha_sys.h
+++ b/hw/alpha/alpha_sys.h
@@ -11,7 +11,7 @@
PCIBus *typhoon_init(MemoryRegion *, ISABus **, qemu_irq *, AlphaCPU *[4],
- pci_map_irq_fn);
+ pci_map_irq_fn, uint8_t devfn_min);
/* alpha_pci.c. */
extern const MemoryRegionOps alpha_pci_ignore_ops;
diff --git a/hw/alpha/dp264.c b/hw/alpha/dp264.c
index 1017ecf330..010d22476b 100644
--- a/hw/alpha/dp264.c
+++ b/hw/alpha/dp264.c
@@ -76,9 +76,12 @@ static void clipper_init(MachineState *machine)
cpus[0]->env.trap_arg1 = 0;
cpus[0]->env.trap_arg2 = smp_cpus;
- /* Init the chipset. */
+ /*
+ * Init the chipset. Because we're using CLIPPER IRQ mappings,
+ * the minimum PCI device IdSel is 1.
+ */
pci_bus = typhoon_init(machine->ram, &isa_bus, &rtc_irq, cpus,
- clipper_pci_map_irq);
+ clipper_pci_map_irq, PCI_DEVFN(1, 0));
/* Since we have an SRM-compatible PALcode, use the SRM epoch. */
mc146818_rtc_init(isa_bus, 1900, rtc_irq);
diff --git a/hw/alpha/typhoon.c b/hw/alpha/typhoon.c
index 87020cbe0d..fa31a2f286 100644
--- a/hw/alpha/typhoon.c
+++ b/hw/alpha/typhoon.c
@@ -815,7 +815,8 @@ static void typhoon_alarm_timer(void *opaque)
}
PCIBus *typhoon_init(MemoryRegion *ram, ISABus **isa_bus, qemu_irq *p_rtc_irq,
- AlphaCPU *cpus[4], pci_map_irq_fn sys_map_irq)
+ AlphaCPU *cpus[4], pci_map_irq_fn sys_map_irq,
+ uint8_t devfn_min)
{
MemoryRegion *addr_space = get_system_memory();
DeviceState *dev;
@@ -885,7 +886,7 @@ PCIBus *typhoon_init(MemoryRegion *ram, ISABus **isa_bus, qemu_irq *p_rtc_irq,
b = pci_register_root_bus(dev, "pci",
typhoon_set_irq, sys_map_irq, s,
&s->pchip.reg_mem, &s->pchip.reg_io,
- 0, 64, TYPE_PCI_BUS);
+ devfn_min, 64, TYPE_PCI_BUS);
phb->bus = b;
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
--
2.25.1
next prev parent reply other threads:[~2021-06-28 14:38 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-28 14:35 [PULL 0/5] target/alpha patch queue Richard Henderson
2021-06-28 14:35 ` Richard Henderson [this message]
2021-06-28 14:35 ` [PULL 2/5] hw/alpha: Provide console information to the PALcode at start-up Richard Henderson
2021-06-28 14:35 ` [PULL 3/5] hw/alpha: Provide a PCI-ISA bridge device node Richard Henderson
2021-06-28 14:35 ` [PULL 4/5] pc-bios: Update the palcode-clipper image Richard Henderson
2021-06-28 14:35 ` [PULL 5/5] target/alpha: Honor the FEN bit Richard Henderson
2021-06-28 14:42 ` [PULL 0/5] target/alpha patch queue no-reply
2021-06-29 10:43 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210628143551.2870006-2-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=thorpej@me.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).