From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
Subject: [PULL 49/63] tcg/mips: Support bswap flags in tcg_out_bswap32
Date: Tue, 29 Jun 2021 11:54:41 -0700 [thread overview]
Message-ID: <20210629185455.3131172-50-richard.henderson@linaro.org> (raw)
In-Reply-To: <20210629185455.3131172-1-richard.henderson@linaro.org>
Merge tcg_out_bswap32 and tcg_out_bswap32s.
Use the flags in the internal uses for loads and stores.
For mips32r2 bswap32 with zero-extension, standardize on
WSBH+ROTR+DEXT. This is the same number of insns as the
previous DSBH+DSHD+DSRL but fits in better with the flags check.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
tcg/mips/tcg-target.c.inc | 39 ++++++++++++++++-----------------------
1 file changed, 16 insertions(+), 23 deletions(-)
diff --git a/tcg/mips/tcg-target.c.inc b/tcg/mips/tcg-target.c.inc
index a9f9f527f6..bf0eb84e2d 100644
--- a/tcg/mips/tcg-target.c.inc
+++ b/tcg/mips/tcg-target.c.inc
@@ -579,27 +579,20 @@ static void tcg_out_bswap_subr(TCGContext *s, const tcg_insn_unit *sub)
tcg_debug_assert(ok);
}
-static void tcg_out_bswap32(TCGContext *s, TCGReg ret, TCGReg arg)
+static void tcg_out_bswap32(TCGContext *s, TCGReg ret, TCGReg arg, int flags)
{
if (use_mips32r2_instructions) {
tcg_out_opc_reg(s, OPC_WSBH, ret, 0, arg);
tcg_out_opc_sa(s, OPC_ROTR, ret, ret, 16);
+ if (flags & TCG_BSWAP_OZ) {
+ tcg_out_opc_bf(s, OPC_DEXT, ret, ret, 31, 0);
+ }
} else {
- tcg_out_bswap_subr(s, bswap32_addr);
- /* delay slot -- never omit the insn, like tcg_out_mov might. */
- tcg_out_opc_reg(s, OPC_OR, TCG_TMP0, arg, TCG_REG_ZERO);
- tcg_out_mov(s, TCG_TYPE_I32, ret, TCG_TMP3);
- }
-}
-
-static void tcg_out_bswap32u(TCGContext *s, TCGReg ret, TCGReg arg)
-{
- if (use_mips32r2_instructions) {
- tcg_out_opc_reg(s, OPC_DSBH, ret, 0, arg);
- tcg_out_opc_reg(s, OPC_DSHD, ret, 0, ret);
- tcg_out_dsrl(s, ret, ret, 32);
- } else {
- tcg_out_bswap_subr(s, bswap32u_addr);
+ if (flags & TCG_BSWAP_OZ) {
+ tcg_out_bswap_subr(s, bswap32u_addr);
+ } else {
+ tcg_out_bswap_subr(s, bswap32_addr);
+ }
/* delay slot -- never omit the insn, like tcg_out_mov might. */
tcg_out_opc_reg(s, OPC_OR, TCG_TMP0, arg, TCG_REG_ZERO);
tcg_out_mov(s, TCG_TYPE_I32, ret, TCG_TMP3);
@@ -1381,7 +1374,7 @@ static void tcg_out_qemu_ld_direct(TCGContext *s, TCGReg lo, TCGReg hi,
if (TCG_TARGET_REG_BITS == 64 && is_64) {
if (use_mips32r2_instructions) {
tcg_out_opc_imm(s, OPC_LWU, lo, base, 0);
- tcg_out_bswap32u(s, lo, lo);
+ tcg_out_bswap32(s, lo, lo, TCG_BSWAP_IZ | TCG_BSWAP_OZ);
} else {
tcg_out_bswap_subr(s, bswap32u_addr);
/* delay slot */
@@ -1394,7 +1387,7 @@ static void tcg_out_qemu_ld_direct(TCGContext *s, TCGReg lo, TCGReg hi,
case MO_SL | MO_BSWAP:
if (use_mips32r2_instructions) {
tcg_out_opc_imm(s, OPC_LW, lo, base, 0);
- tcg_out_bswap32(s, lo, lo);
+ tcg_out_bswap32(s, lo, lo, 0);
} else {
tcg_out_bswap_subr(s, bswap32_addr);
/* delay slot */
@@ -1520,7 +1513,7 @@ static void tcg_out_qemu_st_direct(TCGContext *s, TCGReg lo, TCGReg hi,
break;
case MO_32 | MO_BSWAP:
- tcg_out_bswap32(s, TCG_TMP3, lo);
+ tcg_out_bswap32(s, TCG_TMP3, lo, 0);
lo = TCG_TMP3;
/* FALLTHRU */
case MO_32:
@@ -1539,9 +1532,9 @@ static void tcg_out_qemu_st_direct(TCGContext *s, TCGReg lo, TCGReg hi,
tcg_out_opc_imm(s, OPC_SW, TCG_TMP0, base, 0);
tcg_out_opc_imm(s, OPC_SW, TCG_TMP1, base, 4);
} else {
- tcg_out_bswap32(s, TCG_TMP3, MIPS_BE ? lo : hi);
+ tcg_out_bswap32(s, TCG_TMP3, MIPS_BE ? lo : hi, 0);
tcg_out_opc_imm(s, OPC_SW, TCG_TMP3, base, 0);
- tcg_out_bswap32(s, TCG_TMP3, MIPS_BE ? hi : lo);
+ tcg_out_bswap32(s, TCG_TMP3, MIPS_BE ? hi : lo, 0);
tcg_out_opc_imm(s, OPC_SW, TCG_TMP3, base, 4);
}
break;
@@ -1946,10 +1939,10 @@ static inline void tcg_out_op(TCGContext *s, TCGOpcode opc,
tcg_out_bswap16(s, a0, a1, a2);
break;
case INDEX_op_bswap32_i32:
- tcg_out_bswap32(s, a0, a1);
+ tcg_out_bswap32(s, a0, a1, 0);
break;
case INDEX_op_bswap32_i64:
- tcg_out_bswap32u(s, a0, a1);
+ tcg_out_bswap32(s, a0, a1, a2);
break;
case INDEX_op_bswap64_i64:
tcg_out_bswap64(s, a0, a1);
--
2.25.1
next prev parent reply other threads:[~2021-06-29 19:54 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-29 18:53 [PULL 00/63] tcg patch queue Richard Henderson
2021-06-29 18:53 ` [PULL 01/63] target/nios2: Replace DISAS_TB_JUMP with DISAS_NORETURN Richard Henderson
2021-06-29 18:53 ` [PULL 02/63] target/nios2: Use global cpu_env Richard Henderson
2021-06-29 18:53 ` [PULL 03/63] target/nios2: Use global cpu_R Richard Henderson
2021-06-29 18:53 ` [PULL 04/63] target/nios2: Add DisasContextBase to DisasContext Richard Henderson
2021-06-29 18:53 ` [PULL 05/63] target/nios2: Convert to TranslatorOps Richard Henderson
2021-06-29 18:53 ` [PULL 06/63] target/nios2: Remove assignment to env in handle_instruction Richard Henderson
2021-06-29 18:53 ` [PULL 07/63] target/nios2: Clean up goto " Richard Henderson
2021-06-29 18:54 ` [PULL 08/63] target/nios2: Inline handle_instruction Richard Henderson
2021-06-29 18:54 ` [PULL 09/63] target/nios2: Use pc_next for pc + 4 Richard Henderson
2021-06-29 18:54 ` [PULL 10/63] target/avr: Add DisasContextBase to DisasContext Richard Henderson
2021-06-29 18:54 ` [PULL 11/63] target/avr: Change ctx to DisasContext* in gen_intermediate_code Richard Henderson
2021-06-29 18:54 ` [PULL 12/63] target/avr: Convert to TranslatorOps Richard Henderson
2021-06-29 18:54 ` [PULL 13/63] target/cris: Add DisasContextBase to DisasContext Richard Henderson
2021-06-29 18:54 ` [PULL 14/63] target/cris: Remove DISAS_SWI Richard Henderson
2021-06-29 18:54 ` [PULL 15/63] target/cris: Replace DISAS_TB_JUMP with DISAS_NORETURN Richard Henderson
2021-06-29 18:54 ` [PULL 16/63] target/cris: Mark exceptions as DISAS_NORETURN Richard Henderson
2021-06-29 18:54 ` [PULL 17/63] target/cris: Fix use_goto_tb Richard Henderson
2021-06-29 18:54 ` [PULL 18/63] target/cris: Convert to TranslatorOps Richard Henderson
2021-06-29 18:54 ` [PULL 19/63] target/cris: Mark helper_raise_exception noreturn Richard Henderson
2021-06-29 18:54 ` [PULL 20/63] target/cris: Mark static arrays const Richard Henderson
2021-06-29 18:54 ` [PULL 21/63] target/cris: Fold unhandled X_FLAG changes into cpustate_changed Richard Henderson
2021-06-29 18:54 ` [PULL 22/63] target/cris: Set cpustate_changed for rfe/rfn Richard Henderson
2021-06-29 18:54 ` [PULL 23/63] target/cris: Add DISAS_UPDATE_NEXT Richard Henderson
2021-06-29 18:54 ` [PULL 24/63] target/cris: Add DISAS_DBRANCH Richard Henderson
2021-06-29 18:54 ` [PULL 25/63] target/cris: Use tcg_gen_lookup_and_goto_ptr Richard Henderson
2021-06-29 18:54 ` [PULL 26/63] target/cris: Improve JMP_INDIRECT Richard Henderson
2021-06-29 18:54 ` [PULL 27/63] target/cris: Remove dc->flagx_known Richard Henderson
2021-06-29 18:54 ` [PULL 28/63] target/cris: Do not exit tb for X_FLAG changes Richard Henderson
2021-06-29 18:54 ` [PULL 29/63] tcg: Add tcg_gen_vec_add{sub}16_i32 Richard Henderson
2021-06-29 18:54 ` [PULL 30/63] tcg: Add tcg_gen_vec_add{sub}8_i32 Richard Henderson
2021-06-29 18:54 ` [PULL 31/63] tcg: Add tcg_gen_vec_shl{shr}{sar}16i_i32 Richard Henderson
2021-06-29 18:54 ` [PULL 32/63] tcg: Add tcg_gen_vec_shl{shr}{sar}8i_i32 Richard Henderson
2021-06-29 18:54 ` [PULL 33/63] tcg: Implement tcg_gen_vec_add{sub}32_tl Richard Henderson
2021-06-29 18:54 ` [PULL 34/63] tcg: Use correct trap number for page faults on *BSD systems Richard Henderson
2021-06-29 18:54 ` [PULL 35/63] tcg: Add flags argument to bswap opcodes Richard Henderson
2021-06-29 18:54 ` [PULL 36/63] tcg/i386: Support bswap flags Richard Henderson
2021-06-29 18:54 ` [PULL 37/63] tcg/aarch64: Merge tcg_out_rev{16,32,64} Richard Henderson
2021-06-29 18:54 ` [PULL 38/63] tcg/aarch64: Support bswap flags Richard Henderson
2021-06-29 18:54 ` [PULL 39/63] tcg/arm: " Richard Henderson
2021-06-29 18:54 ` [PULL 40/63] tcg/ppc: Split out tcg_out_ext{8,16,32}s Richard Henderson
2021-06-29 18:54 ` [PULL 41/63] tcg/ppc: Split out tcg_out_sari{32,64} Richard Henderson
2021-06-29 18:54 ` [PULL 42/63] tcg/ppc: Split out tcg_out_bswap16 Richard Henderson
2021-06-29 18:54 ` [PULL 43/63] tcg/ppc: Split out tcg_out_bswap32 Richard Henderson
2021-06-29 18:54 ` [PULL 44/63] tcg/ppc: Split out tcg_out_bswap64 Richard Henderson
2021-06-29 18:54 ` [PULL 45/63] tcg/ppc: Support bswap flags Richard Henderson
2021-06-29 18:54 ` [PULL 46/63] tcg/ppc: Use power10 byte-reverse instructions Richard Henderson
2021-06-29 18:54 ` [PULL 47/63] tcg/s390: Support bswap flags Richard Henderson
2021-06-29 18:54 ` [PULL 48/63] tcg/mips: Support bswap flags in tcg_out_bswap16 Richard Henderson
2021-06-29 18:54 ` Richard Henderson [this message]
2021-06-29 18:54 ` [PULL 50/63] tcg/tci: Support bswap flags Richard Henderson
2021-06-29 18:54 ` [PULL 51/63] tcg: Handle new bswap flags during optimize Richard Henderson
2021-06-29 18:54 ` [PULL 52/63] tcg: Add flags argument to tcg_gen_bswap16_*, tcg_gen_bswap32_i64 Richard Henderson
2021-06-29 18:54 ` [PULL 53/63] tcg: Make use of bswap flags in tcg_gen_qemu_ld_* Richard Henderson
2021-06-29 18:54 ` [PULL 54/63] tcg: Make use of bswap flags in tcg_gen_qemu_st_* Richard Henderson
2021-06-29 18:54 ` [PULL 55/63] target/arm: Improve REV32 Richard Henderson
2021-06-29 18:54 ` [PULL 56/63] target/arm: Improve vector REV Richard Henderson
2021-06-29 18:54 ` [PULL 57/63] target/arm: Improve REVSH Richard Henderson
2021-06-29 18:54 ` [PULL 58/63] target/i386: Improve bswap translation Richard Henderson
2021-06-29 18:54 ` [PULL 59/63] target/sh4: Improve swap.b translation Richard Henderson
2021-06-29 18:54 ` [PULL 60/63] target/mips: Fix gen_mxu_s32ldd_s32lddr Richard Henderson
2021-06-29 18:54 ` [PULL 61/63] tcg/arm: Unset TCG_TARGET_HAS_MEMORY_BSWAP Richard Henderson
2021-06-29 18:54 ` [PULL 62/63] tcg/aarch64: " Richard Henderson
2021-06-29 18:54 ` [PULL 63/63] tcg/riscv: Remove MO_BSWAP handling Richard Henderson
2021-07-02 7:21 ` [PULL 00/63] tcg patch queue Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210629185455.3131172-50-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=f4bug@amsat.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).