From: Cindy Lu <lulu@redhat.com>
To: lulu@redhat.com, mst@redhat.com, jasowang@redhat.com,
qemu-devel@nongnu.org
Subject: [PATCH v8 7/9] virtio-pci: decouple notifier from interrupt process
Date: Tue, 6 Jul 2021 15:20:28 +0800 [thread overview]
Message-ID: <20210706072030.32365-8-lulu@redhat.com> (raw)
In-Reply-To: <20210706072030.32365-1-lulu@redhat.com>
use the virtio_pci_get_notifier function to
get the notifer, the input of the function
will is the idx, the output is notifier and
vector
Signed-off-by: Cindy Lu <lulu@redhat.com>
---
hw/virtio/virtio-pci.c | 45 ++++++++++++++++++++++++++++++++----------
1 file changed, 35 insertions(+), 10 deletions(-)
diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
index 2fe5b1f5aa..fe06847b62 100644
--- a/hw/virtio/virtio-pci.c
+++ b/hw/virtio/virtio-pci.c
@@ -710,6 +710,28 @@ static void kvm_virtio_pci_irqfd_release(VirtIOPCIProxy *proxy,
ret = kvm_irqchip_remove_irqfd_notifier_gsi(kvm_state, n, irqfd->virq);
assert(ret == 0);
}
+static int virtio_pci_get_notifier(VirtIOPCIProxy *proxy, int queue_no,
+ EventNotifier **n, unsigned int *vector)
+{
+ PCIDevice *dev = &proxy->pci_dev;
+ VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus);
+ VirtQueue *vq;
+
+ if (queue_no == VIRTIO_CONFIG_IRQ_IDX) {
+ return -1;
+ } else {
+ if (!virtio_queue_get_num(vdev, queue_no)) {
+ return -1;
+ }
+ *vector = virtio_queue_vector(vdev, queue_no);
+ vq = virtio_get_queue(vdev, queue_no);
+ *n = virtio_queue_get_guest_notifier(vq);
+ }
+ if (*vector >= msix_nr_vectors_allocated(dev)) {
+ return -1;
+ }
+ return 0;
+}
static int kvm_virtio_pci_vector_use(VirtIOPCIProxy *proxy, int nvqs)
{
@@ -718,13 +740,15 @@ static int kvm_virtio_pci_vector_use(VirtIOPCIProxy *proxy, int nvqs)
VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
unsigned int vector;
int ret, queue_no;
- VirtQueue *vq;
EventNotifier *n;
for (queue_no = 0; queue_no < nvqs; queue_no++) {
if (!virtio_queue_get_num(vdev, queue_no)) {
break;
}
- vector = virtio_queue_vector(vdev, queue_no);
+ ret = virtio_pci_get_notifier(proxy, queue_no, &n, &vector);
+ if (ret < 0) {
+ break;
+ }
if (vector >= msix_nr_vectors_allocated(dev)) {
continue;
}
@@ -736,8 +760,6 @@ static int kvm_virtio_pci_vector_use(VirtIOPCIProxy *proxy, int nvqs)
* Otherwise, delay until unmasked in the frontend.
*/
if (vdev->use_guest_notifier_mask && k->guest_notifier_mask) {
- vq = virtio_get_queue(vdev, queue_no);
- n = virtio_queue_get_guest_notifier(vq);
ret = kvm_virtio_pci_irqfd_use(proxy, n, vector);
if (ret < 0) {
kvm_virtio_pci_vq_vector_release(proxy, vector);
@@ -754,8 +776,10 @@ undo:
continue;
}
if (vdev->use_guest_notifier_mask && k->guest_notifier_mask) {
- vq = virtio_get_queue(vdev, queue_no);
- n = virtio_queue_get_guest_notifier(vq);
+ ret = virtio_pci_get_notifier(proxy, queue_no, &n, &vector);
+ if (ret < 0) {
+ break;
+ }
kvm_virtio_pci_irqfd_release(proxy, n, vector);
}
kvm_virtio_pci_vq_vector_release(proxy, vector);
@@ -770,13 +794,16 @@ static void kvm_virtio_pci_vector_release(VirtIOPCIProxy *proxy, int nvqs)
unsigned int vector;
int queue_no;
VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
- VirtQueue *vq;
EventNotifier *n;
+ int ret ;
for (queue_no = 0; queue_no < nvqs; queue_no++) {
if (!virtio_queue_get_num(vdev, queue_no)) {
break;
}
- vector = virtio_queue_vector(vdev, queue_no);
+ ret = virtio_pci_get_notifier(proxy, queue_no, &n, &vector);
+ if (ret < 0) {
+ break;
+ }
if (vector >= msix_nr_vectors_allocated(dev)) {
continue;
}
@@ -784,8 +811,6 @@ static void kvm_virtio_pci_vector_release(VirtIOPCIProxy *proxy, int nvqs)
* Otherwise, it was cleaned when masked in the frontend.
*/
if (vdev->use_guest_notifier_mask && k->guest_notifier_mask) {
- vq = virtio_get_queue(vdev, queue_no);
- n = virtio_queue_get_guest_notifier(vq);
kvm_virtio_pci_irqfd_release(proxy, n, vector);
}
kvm_virtio_pci_vq_vector_release(proxy, vector);
--
2.21.3
next prev parent reply other threads:[~2021-07-06 7:24 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-06 7:20 [PATCH v8 0/9] vhost-vdpa: add support for configure interrupt Cindy Lu
2021-07-06 7:20 ` [PATCH v8 1/9] virtio: introduce macro IRTIO_CONFIG_IRQ_IDX Cindy Lu
2021-07-09 4:04 ` Jason Wang
2021-07-06 7:20 ` [PATCH v8 2/9] virtio-pci:decouple virtqueue from interrupt setting process Cindy Lu
2021-07-09 5:22 ` Jason Wang
2021-07-06 7:20 ` [PATCH v8 3/9] vhost: add new call back function for config interrupt Cindy Lu
2021-07-09 5:23 ` Jason Wang
2021-07-06 7:20 ` [PATCH v8 4/9] vhost-vdpa: add support for config interrupt call back Cindy Lu
2021-07-09 5:24 ` Jason Wang
2021-07-06 7:20 ` [PATCH v8 5/9] vhost-net:add support for configure interrupt Cindy Lu
2021-07-09 5:41 ` Jason Wang
2021-07-06 7:20 ` [PATCH v8 6/9] virtio-mmio: add " Cindy Lu
2021-07-09 5:43 ` Jason Wang
2021-07-06 7:20 ` Cindy Lu [this message]
2021-07-09 5:53 ` [PATCH v8 7/9] virtio-pci: decouple notifier from interrupt process Jason Wang
2021-07-06 7:20 ` [PATCH v8 8/9] virtio-pci:decouple the single vector from the " Cindy Lu
2021-07-09 5:54 ` Jason Wang
2021-07-06 7:20 ` [PATCH v8 9/9] virtio-pci: add support for configure interrupt Cindy Lu
2021-07-09 6:03 ` Jason Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210706072030.32365-8-lulu@redhat.com \
--to=lulu@redhat.com \
--cc=jasowang@redhat.com \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).