From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: David Edmondson <david.edmondson@oracle.com>
Subject: [PULL 09/40] target/i386: Consolidate the X86XSaveArea offset checks
Date: Tue, 6 Jul 2021 12:01:10 +0200 [thread overview]
Message-ID: <20210706100141.303960-10-pbonzini@redhat.com> (raw)
In-Reply-To: <20210706100141.303960-1-pbonzini@redhat.com>
From: David Edmondson <david.edmondson@oracle.com>
Rather than having similar but different checks in cpu.h and kvm.c,
move them all to cpu.h.
Message-Id: <20210705104632.2902400-3-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
target/i386/cpu.h | 22 +++++++++++++++-------
target/i386/kvm/kvm.c | 39 ---------------------------------------
2 files changed, 15 insertions(+), 46 deletions(-)
diff --git a/target/i386/cpu.h b/target/i386/cpu.h
index aedb8f2e01..6590ad6391 100644
--- a/target/i386/cpu.h
+++ b/target/i386/cpu.h
@@ -1341,21 +1341,29 @@ typedef struct X86XSaveArea {
XSavePKRU pkru_state;
} X86XSaveArea;
-QEMU_BUILD_BUG_ON(offsetof(X86XSaveArea, avx_state) != XSAVE_AVX_OFFSET);
QEMU_BUILD_BUG_ON(sizeof(XSaveAVX) != 0x100);
-QEMU_BUILD_BUG_ON(offsetof(X86XSaveArea, bndreg_state) != XSAVE_BNDREG_OFFSET);
QEMU_BUILD_BUG_ON(sizeof(XSaveBNDREG) != 0x40);
-QEMU_BUILD_BUG_ON(offsetof(X86XSaveArea, bndcsr_state) != XSAVE_BNDCSR_OFFSET);
QEMU_BUILD_BUG_ON(sizeof(XSaveBNDCSR) != 0x40);
-QEMU_BUILD_BUG_ON(offsetof(X86XSaveArea, opmask_state) != XSAVE_OPMASK_OFFSET);
QEMU_BUILD_BUG_ON(sizeof(XSaveOpmask) != 0x40);
-QEMU_BUILD_BUG_ON(offsetof(X86XSaveArea, zmm_hi256_state) != XSAVE_ZMM_HI256_OFFSET);
QEMU_BUILD_BUG_ON(sizeof(XSaveZMM_Hi256) != 0x200);
-QEMU_BUILD_BUG_ON(offsetof(X86XSaveArea, hi16_zmm_state) != XSAVE_HI16_ZMM_OFFSET);
QEMU_BUILD_BUG_ON(sizeof(XSaveHi16_ZMM) != 0x400);
-QEMU_BUILD_BUG_ON(offsetof(X86XSaveArea, pkru_state) != XSAVE_PKRU_OFFSET);
QEMU_BUILD_BUG_ON(sizeof(XSavePKRU) != 0x8);
+QEMU_BUILD_BUG_ON(offsetof(X86XSaveArea, legacy.fcw) != XSAVE_FCW_FSW_OFFSET);
+QEMU_BUILD_BUG_ON(offsetof(X86XSaveArea, legacy.ftw) != XSAVE_FTW_FOP_OFFSET);
+QEMU_BUILD_BUG_ON(offsetof(X86XSaveArea, legacy.fpip) != XSAVE_CWD_RIP_OFFSET);
+QEMU_BUILD_BUG_ON(offsetof(X86XSaveArea, legacy.fpdp) != XSAVE_CWD_RDP_OFFSET);
+QEMU_BUILD_BUG_ON(offsetof(X86XSaveArea, legacy.mxcsr) != XSAVE_MXCSR_OFFSET);
+QEMU_BUILD_BUG_ON(offsetof(X86XSaveArea, legacy.fpregs) != XSAVE_ST_SPACE_OFFSET);
+QEMU_BUILD_BUG_ON(offsetof(X86XSaveArea, legacy.xmm_regs) != XSAVE_XMM_SPACE_OFFSET);
+QEMU_BUILD_BUG_ON(offsetof(X86XSaveArea, avx_state) != XSAVE_AVX_OFFSET);
+QEMU_BUILD_BUG_ON(offsetof(X86XSaveArea, bndreg_state) != XSAVE_BNDREG_OFFSET);
+QEMU_BUILD_BUG_ON(offsetof(X86XSaveArea, bndcsr_state) != XSAVE_BNDCSR_OFFSET);
+QEMU_BUILD_BUG_ON(offsetof(X86XSaveArea, opmask_state) != XSAVE_OPMASK_OFFSET);
+QEMU_BUILD_BUG_ON(offsetof(X86XSaveArea, zmm_hi256_state) != XSAVE_ZMM_HI256_OFFSET);
+QEMU_BUILD_BUG_ON(offsetof(X86XSaveArea, hi16_zmm_state) != XSAVE_HI16_ZMM_OFFSET);
+QEMU_BUILD_BUG_ON(offsetof(X86XSaveArea, pkru_state) != XSAVE_PKRU_OFFSET);
+
typedef enum TPRAccess {
TPR_ACCESS_READ,
TPR_ACCESS_WRITE,
diff --git a/target/i386/kvm/kvm.c b/target/i386/kvm/kvm.c
index 04e4ec063f..3ab1d71775 100644
--- a/target/i386/kvm/kvm.c
+++ b/target/i386/kvm/kvm.c
@@ -2466,45 +2466,6 @@ static int kvm_put_fpu(X86CPU *cpu)
return kvm_vcpu_ioctl(CPU(cpu), KVM_SET_FPU, &fpu);
}
-#define XSAVE_FCW_FSW 0
-#define XSAVE_FTW_FOP 1
-#define XSAVE_CWD_RIP 2
-#define XSAVE_CWD_RDP 4
-#define XSAVE_MXCSR 6
-#define XSAVE_ST_SPACE 8
-#define XSAVE_XMM_SPACE 40
-#define XSAVE_XSTATE_BV 128
-#define XSAVE_YMMH_SPACE 144
-#define XSAVE_BNDREGS 240
-#define XSAVE_BNDCSR 256
-#define XSAVE_OPMASK 272
-#define XSAVE_ZMM_Hi256 288
-#define XSAVE_Hi16_ZMM 416
-#define XSAVE_PKRU 672
-
-#define XSAVE_BYTE_OFFSET(word_offset) \
- ((word_offset) * sizeof_field(struct kvm_xsave, region[0]))
-
-#define ASSERT_OFFSET(word_offset, field) \
- QEMU_BUILD_BUG_ON(XSAVE_BYTE_OFFSET(word_offset) != \
- offsetof(X86XSaveArea, field))
-
-ASSERT_OFFSET(XSAVE_FCW_FSW, legacy.fcw);
-ASSERT_OFFSET(XSAVE_FTW_FOP, legacy.ftw);
-ASSERT_OFFSET(XSAVE_CWD_RIP, legacy.fpip);
-ASSERT_OFFSET(XSAVE_CWD_RDP, legacy.fpdp);
-ASSERT_OFFSET(XSAVE_MXCSR, legacy.mxcsr);
-ASSERT_OFFSET(XSAVE_ST_SPACE, legacy.fpregs);
-ASSERT_OFFSET(XSAVE_XMM_SPACE, legacy.xmm_regs);
-ASSERT_OFFSET(XSAVE_XSTATE_BV, header.xstate_bv);
-ASSERT_OFFSET(XSAVE_YMMH_SPACE, avx_state);
-ASSERT_OFFSET(XSAVE_BNDREGS, bndreg_state);
-ASSERT_OFFSET(XSAVE_BNDCSR, bndcsr_state);
-ASSERT_OFFSET(XSAVE_OPMASK, opmask_state);
-ASSERT_OFFSET(XSAVE_ZMM_Hi256, zmm_hi256_state);
-ASSERT_OFFSET(XSAVE_Hi16_ZMM, hi16_zmm_state);
-ASSERT_OFFSET(XSAVE_PKRU, pkru_state);
-
static int kvm_put_xsave(X86CPU *cpu)
{
CPUX86State *env = &cpu->env;
--
2.31.1
next prev parent reply other threads:[~2021-07-06 10:21 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-06 10:01 [PULL 00/40] Misc patches for 2021-07-06 Paolo Bonzini
2021-07-06 10:01 ` [PULL 01/40] Makefile: Remove /usr/bin/env wrapper from the SHELL variable Paolo Bonzini
2021-07-06 10:01 ` [PULL 02/40] softmmu/vl: Remove obsolete comment about the "frame" parameter Paolo Bonzini
2021-07-06 10:01 ` [PULL 03/40] ui: Fix the "-display sdl,window_close=..." parameter Paolo Bonzini
2021-07-06 10:01 ` [PULL 04/40] ui: Mark the '-no-quit' option as deprecated Paolo Bonzini
2021-07-06 10:01 ` [PULL 05/40] qemu-options: Improve the documentation of the -display options Paolo Bonzini
2021-07-06 10:01 ` [PULL 06/40] coverity-scan: Remove lm32 / unicore32 targets Paolo Bonzini
2021-07-06 10:01 ` [PULL 07/40] coverity-scan: switch to vpath build Paolo Bonzini
2021-07-06 10:01 ` [PULL 08/40] target/i386: Declare constants for XSAVE offsets Paolo Bonzini
2021-07-06 10:01 ` Paolo Bonzini [this message]
2021-07-06 10:01 ` [PULL 10/40] target/i386: Clarify the padding requirements of X86XSaveArea Paolo Bonzini
2021-07-06 10:01 ` [PULL 11/40] target/i386: Pass buffer and length to XSAVE helper Paolo Bonzini
2021-07-06 10:01 ` [PULL 12/40] target/i386: Make x86_ext_save_areas visible outside cpu.c Paolo Bonzini
2021-07-06 10:01 ` [PULL 13/40] target/i386: Observe XSAVE state area offsets Paolo Bonzini
2021-07-06 10:01 ` [PULL 14/40] target/i386: Populate x86_ext_save_areas offsets using cpuid where possible Paolo Bonzini
2021-07-06 10:01 ` [PULL 15/40] target/i386: Move X86XSaveArea into TCG Paolo Bonzini
2021-07-06 10:01 ` [PULL 16/40] configure: drop vte-2.90 check Paolo Bonzini
2021-07-06 10:01 ` [PULL 17/40] configure, meson: convert vte detection to meson Paolo Bonzini
2021-07-06 10:01 ` [PULL 18/40] configure, meson: convert virgl " Paolo Bonzini
2021-07-06 10:01 ` [PULL 19/40] configure, meson: convert libdaxctl " Paolo Bonzini
2021-07-06 10:01 ` [PULL 20/40] configure, meson: convert libpmem " Paolo Bonzini
2021-07-06 10:01 ` [PULL 21/40] configure, meson: convert liburing " Paolo Bonzini
2021-07-06 10:01 ` [PULL 22/40] configure, meson: convert libxml2 " Paolo Bonzini
2021-07-06 10:01 ` [PULL 23/40] meson: sort existing compiler tests Paolo Bonzini
2021-07-06 10:01 ` [PULL 24/40] meson: store dependency('threads') in a variable Paolo Bonzini
2021-07-06 10:01 ` [PULL 25/40] configure, meson: move CONFIG_IVSHMEM to meson Paolo Bonzini
2021-07-06 10:01 ` [PULL 26/40] configure: convert HAVE_BROKEN_SIZE_MAX " Paolo Bonzini
2021-07-06 10:01 ` [PULL 27/40] configure: convert compiler tests to meson, part 1 Paolo Bonzini
2021-07-06 10:01 ` [PULL 28/40] configure: convert compiler tests to meson, part 2 Paolo Bonzini
2021-07-06 10:01 ` [PULL 29/40] configure: convert compiler tests to meson, part 3 Paolo Bonzini
2021-07-06 10:01 ` [PULL 30/40] configure: convert compiler tests to meson, part 4 Paolo Bonzini
2021-07-06 10:01 ` [PULL 31/40] configure: convert compiler tests to meson, part 5 Paolo Bonzini
2021-07-06 10:01 ` [PULL 32/40] configure: convert compiler tests to meson, part 6 Paolo Bonzini
2021-07-06 10:01 ` [PULL 33/40] qom: export more functions for use with non-UserCreatable objects Paolo Bonzini
2021-07-06 10:01 ` [PULL 34/40] keyval: introduce keyval_merge Paolo Bonzini
2021-07-06 10:01 ` [PULL 35/40] keyval: introduce keyval_parse_into Paolo Bonzini
2021-07-06 10:01 ` [PULL 36/40] vl: switch -M parsing to keyval Paolo Bonzini
2021-07-08 16:31 ` Jason Andryuk
2021-07-13 2:15 ` [PATCH] vl: Parse legacy default_machine_opts Jason Andryuk
2021-07-22 14:12 ` Anthony PERARD via
2021-07-22 14:39 ` Paolo Bonzini
2021-07-12 19:24 ` [PULL 36/40] vl: switch -M parsing to keyval Volker Rümelin
2021-07-13 19:43 ` Alex Williamson
2021-07-13 23:10 ` Alex Williamson
2021-07-14 6:16 ` Mark Cave-Ayland
2021-07-14 22:13 ` Alex Williamson
2021-07-22 8:19 ` Peter Krempa
2021-07-22 14:39 ` Paolo Bonzini
2021-07-22 14:50 ` Peter Krempa
2021-07-06 10:01 ` [PULL 37/40] machine: add smp compound property Paolo Bonzini
2021-07-13 10:37 ` Peter Maydell
2021-07-13 11:07 ` Markus Armbruster
2021-07-13 10:53 ` Peter Maydell
2021-07-06 10:01 ` [PULL 38/40] qemu-option: remove now-dead code Paolo Bonzini
2021-07-06 10:01 ` [PULL 39/40] Set icon for QEMU binary on Mac OS Paolo Bonzini
2021-07-06 10:01 ` [PULL 40/40] config-host.mak: remove unused compiler-related lines Paolo Bonzini
2021-07-06 12:10 ` [PULL 00/40] Misc patches for 2021-07-06 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210706100141.303960-10-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=david.edmondson@oracle.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).