From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Daniel P . Berrangé" <berrange@redhat.com>
Subject: [PULL 32/40] configure: convert compiler tests to meson, part 6
Date: Tue, 6 Jul 2021 12:01:33 +0200 [thread overview]
Message-ID: <20210706100141.303960-33-pbonzini@redhat.com> (raw)
In-Reply-To: <20210706100141.303960-1-pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
configure | 75 -----------------------------------------------------
meson.build | 11 ++++++++
2 files changed, 11 insertions(+), 75 deletions(-)
diff --git a/configure b/configure
index 1cac47399d..0e487ae091 100755
--- a/configure
+++ b/configure
@@ -3763,65 +3763,6 @@ else # "$safe_stack" = ""
fi
fi
-##########################################
-# check if we have open_by_handle_at
-
-open_by_handle_at=no
-cat > $TMPC << EOF
-#include <fcntl.h>
-#if !defined(AT_EMPTY_PATH)
-# error missing definition
-#else
-int main(void) { struct file_handle fh; return open_by_handle_at(0, &fh, 0); }
-#endif
-EOF
-if compile_prog "" "" ; then
- open_by_handle_at=yes
-fi
-
-########################################
-# check if we have linux/magic.h
-
-linux_magic_h=no
-cat > $TMPC << EOF
-#include <linux/magic.h>
-int main(void) {
- return 0;
-}
-EOF
-if compile_prog "" "" ; then
- linux_magic_h=yes
-fi
-
-########################################
-# check if we have valgrind/valgrind.h
-
-valgrind_h=no
-cat > $TMPC << EOF
-#include <valgrind/valgrind.h>
-int main(void) {
- return 0;
-}
-EOF
-if compile_prog "" "" ; then
- valgrind_h=yes
-fi
-
-########################################
-# check if environ is declared
-
-has_environ=no
-cat > $TMPC << EOF
-#include <unistd.h>
-int main(void) {
- environ = 0;
- return 0;
-}
-EOF
-if compile_prog "" "" ; then
- has_environ=yes
-fi
-
########################################
# check if cpuid.h is usable.
@@ -4761,18 +4702,6 @@ if test "$crypto_afalg" = "yes" ; then
echo "CONFIG_AF_ALG=y" >> $config_host_mak
fi
-if test "$open_by_handle_at" = "yes" ; then
- echo "CONFIG_OPEN_BY_HANDLE=y" >> $config_host_mak
-fi
-
-if test "$linux_magic_h" = "yes" ; then
- echo "CONFIG_LINUX_MAGIC_H=y" >> $config_host_mak
-fi
-
-if test "$valgrind_h" = "yes" ; then
- echo "CONFIG_VALGRIND_H=y" >> $config_host_mak
-fi
-
if test "$have_asan_iface_fiber" = "yes" ; then
echo "CONFIG_ASAN_IFACE_FIBER=y" >> $config_host_mak
fi
@@ -4781,10 +4710,6 @@ if test "$have_tsan" = "yes" && test "$have_tsan_iface_fiber" = "yes" ; then
echo "CONFIG_TSAN=y" >> $config_host_mak
fi
-if test "$has_environ" = "yes" ; then
- echo "CONFIG_HAS_ENVIRON=y" >> $config_host_mak
-fi
-
if test "$cpuid_h" = "yes" ; then
echo "CONFIG_CPUID_H=y" >> $config_host_mak
fi
diff --git a/meson.build b/meson.build
index 12162264db..1651496800 100644
--- a/meson.build
+++ b/meson.build
@@ -1260,6 +1260,8 @@ config_host_data.set('HAVE_HOST_BLOCK_DEVICE', have_host_block_device)
# has_header
config_host_data.set('CONFIG_EPOLL', cc.has_header('sys/epoll.h'))
+config_host_data.set('CONFIG_LINUX_MAGIC_H', cc.has_header('linux/magic.h'))
+config_host_data.set('CONFIG_VALGRIND_H', cc.has_header('valgrind/valgrind.h'))
config_host_data.set('HAVE_BTRFS_H', cc.has_header('linux/btrfs.h'))
config_host_data.set('HAVE_DRM_H', cc.has_header('libdrm/drm.h'))
config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h'))
@@ -1292,6 +1294,8 @@ config_host_data.set('CONFIG_BYTESWAP_H',
cc.has_header_symbol('byteswap.h', 'bswap_32'))
config_host_data.set('CONFIG_EPOLL_CREATE1',
cc.has_header_symbol('sys/epoll.h', 'epoll_create1'))
+config_host_data.set('CONFIG_HAS_ENVIRON',
+ cc.has_header_symbol('unistd.h', 'environ', prefix: gnu_source_prefix))
config_host_data.set('CONFIG_FALLOCATE_PUNCH_HOLE',
cc.has_header_symbol('linux/falloc.h', 'FALLOC_FL_PUNCH_HOLE') and
cc.has_header_symbol('linux/falloc.h', 'FALLOC_FL_KEEP_SIZE'))
@@ -1350,6 +1354,13 @@ config_host_data.set('CONFIG_MADVISE', cc.compiles(gnu_source_prefix + '''
config_host_data.set('CONFIG_MEMFD', cc.compiles(gnu_source_prefix + '''
#include <sys/mman.h>
int main(void) { return memfd_create("foo", MFD_ALLOW_SEALING); }'''))
+config_host_data.set('CONFIG_OPEN_BY_HANDLE', cc.compiles(gnu_source_prefix + '''
+ #include <fcntl.h>
+ #if !defined(AT_EMPTY_PATH)
+ # error missing definition
+ #else
+ int main(void) { struct file_handle fh; return open_by_handle_at(0, &fh, 0); }
+ #endif'''))
config_host_data.set('CONFIG_PIPE2', cc.compiles(gnu_source_prefix + '''
#include <unistd.h>
#include <fcntl.h>
--
2.31.1
next prev parent reply other threads:[~2021-07-06 10:42 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-06 10:01 [PULL 00/40] Misc patches for 2021-07-06 Paolo Bonzini
2021-07-06 10:01 ` [PULL 01/40] Makefile: Remove /usr/bin/env wrapper from the SHELL variable Paolo Bonzini
2021-07-06 10:01 ` [PULL 02/40] softmmu/vl: Remove obsolete comment about the "frame" parameter Paolo Bonzini
2021-07-06 10:01 ` [PULL 03/40] ui: Fix the "-display sdl,window_close=..." parameter Paolo Bonzini
2021-07-06 10:01 ` [PULL 04/40] ui: Mark the '-no-quit' option as deprecated Paolo Bonzini
2021-07-06 10:01 ` [PULL 05/40] qemu-options: Improve the documentation of the -display options Paolo Bonzini
2021-07-06 10:01 ` [PULL 06/40] coverity-scan: Remove lm32 / unicore32 targets Paolo Bonzini
2021-07-06 10:01 ` [PULL 07/40] coverity-scan: switch to vpath build Paolo Bonzini
2021-07-06 10:01 ` [PULL 08/40] target/i386: Declare constants for XSAVE offsets Paolo Bonzini
2021-07-06 10:01 ` [PULL 09/40] target/i386: Consolidate the X86XSaveArea offset checks Paolo Bonzini
2021-07-06 10:01 ` [PULL 10/40] target/i386: Clarify the padding requirements of X86XSaveArea Paolo Bonzini
2021-07-06 10:01 ` [PULL 11/40] target/i386: Pass buffer and length to XSAVE helper Paolo Bonzini
2021-07-06 10:01 ` [PULL 12/40] target/i386: Make x86_ext_save_areas visible outside cpu.c Paolo Bonzini
2021-07-06 10:01 ` [PULL 13/40] target/i386: Observe XSAVE state area offsets Paolo Bonzini
2021-07-06 10:01 ` [PULL 14/40] target/i386: Populate x86_ext_save_areas offsets using cpuid where possible Paolo Bonzini
2021-07-06 10:01 ` [PULL 15/40] target/i386: Move X86XSaveArea into TCG Paolo Bonzini
2021-07-06 10:01 ` [PULL 16/40] configure: drop vte-2.90 check Paolo Bonzini
2021-07-06 10:01 ` [PULL 17/40] configure, meson: convert vte detection to meson Paolo Bonzini
2021-07-06 10:01 ` [PULL 18/40] configure, meson: convert virgl " Paolo Bonzini
2021-07-06 10:01 ` [PULL 19/40] configure, meson: convert libdaxctl " Paolo Bonzini
2021-07-06 10:01 ` [PULL 20/40] configure, meson: convert libpmem " Paolo Bonzini
2021-07-06 10:01 ` [PULL 21/40] configure, meson: convert liburing " Paolo Bonzini
2021-07-06 10:01 ` [PULL 22/40] configure, meson: convert libxml2 " Paolo Bonzini
2021-07-06 10:01 ` [PULL 23/40] meson: sort existing compiler tests Paolo Bonzini
2021-07-06 10:01 ` [PULL 24/40] meson: store dependency('threads') in a variable Paolo Bonzini
2021-07-06 10:01 ` [PULL 25/40] configure, meson: move CONFIG_IVSHMEM to meson Paolo Bonzini
2021-07-06 10:01 ` [PULL 26/40] configure: convert HAVE_BROKEN_SIZE_MAX " Paolo Bonzini
2021-07-06 10:01 ` [PULL 27/40] configure: convert compiler tests to meson, part 1 Paolo Bonzini
2021-07-06 10:01 ` [PULL 28/40] configure: convert compiler tests to meson, part 2 Paolo Bonzini
2021-07-06 10:01 ` [PULL 29/40] configure: convert compiler tests to meson, part 3 Paolo Bonzini
2021-07-06 10:01 ` [PULL 30/40] configure: convert compiler tests to meson, part 4 Paolo Bonzini
2021-07-06 10:01 ` [PULL 31/40] configure: convert compiler tests to meson, part 5 Paolo Bonzini
2021-07-06 10:01 ` Paolo Bonzini [this message]
2021-07-06 10:01 ` [PULL 33/40] qom: export more functions for use with non-UserCreatable objects Paolo Bonzini
2021-07-06 10:01 ` [PULL 34/40] keyval: introduce keyval_merge Paolo Bonzini
2021-07-06 10:01 ` [PULL 35/40] keyval: introduce keyval_parse_into Paolo Bonzini
2021-07-06 10:01 ` [PULL 36/40] vl: switch -M parsing to keyval Paolo Bonzini
2021-07-08 16:31 ` Jason Andryuk
2021-07-13 2:15 ` [PATCH] vl: Parse legacy default_machine_opts Jason Andryuk
2021-07-22 14:12 ` Anthony PERARD via
2021-07-22 14:39 ` Paolo Bonzini
2021-07-12 19:24 ` [PULL 36/40] vl: switch -M parsing to keyval Volker Rümelin
2021-07-13 19:43 ` Alex Williamson
2021-07-13 23:10 ` Alex Williamson
2021-07-14 6:16 ` Mark Cave-Ayland
2021-07-14 22:13 ` Alex Williamson
2021-07-22 8:19 ` Peter Krempa
2021-07-22 14:39 ` Paolo Bonzini
2021-07-22 14:50 ` Peter Krempa
2021-07-06 10:01 ` [PULL 37/40] machine: add smp compound property Paolo Bonzini
2021-07-13 10:37 ` Peter Maydell
2021-07-13 11:07 ` Markus Armbruster
2021-07-13 10:53 ` Peter Maydell
2021-07-06 10:01 ` [PULL 38/40] qemu-option: remove now-dead code Paolo Bonzini
2021-07-06 10:01 ` [PULL 39/40] Set icon for QEMU binary on Mac OS Paolo Bonzini
2021-07-06 10:01 ` [PULL 40/40] config-host.mak: remove unused compiler-related lines Paolo Bonzini
2021-07-06 12:10 ` [PULL 00/40] Misc patches for 2021-07-06 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210706100141.303960-33-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=berrange@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).