* [PATCH 1/2] gitlab: prevent CI jobs running pushes to default branch or tags
2021-07-19 12:12 [PATCH 0/2] gitlab: limit jobs executed in most pipelines by default Daniel P. Berrangé
@ 2021-07-19 12:12 ` Daniel P. Berrangé
2021-07-19 12:12 ` [PATCH 2/2] gitlab: cut down on jobs run by default in user forks Daniel P. Berrangé
1 sibling, 0 replies; 3+ messages in thread
From: Daniel P. Berrangé @ 2021-07-19 12:12 UTC (permalink / raw)
To: qemu-devel
Cc: Thomas Huth, Daniel P. Berrangé, Philippe Mathieu-Daudé,
Wainer dos Santos Moschetta, Willian Rampazzo, Alex Bennée
When patch series are accepted they are first pushed to the 'staging'
branch, which triggers a CI pipeline. If-and-only-if the pipeline
succeeds, the code is then pushed to the default branch. The latter
step triggers a second pipeline that duplicates what was just validated
in the 'staging' branch. This wastes CI resources and can delay jobs
needed by a subsequently pushed 'staging' branch.
This is particularly evident with jobs delegated to Cirrus CI where
there is very limited concurrency of jobs. The duplicate jobs in
'master' often delay the next 'staging' jobs enough to cause 1 hour
timeout to be hit.
There is similar wasted CI resource when release tags are pushed to
the repo, since the branch associated with the release will have
already passed CI.
For user forks is is reasonable to skip CI on the default branch since
that's either usually unused or follows the main repo default branch.
Meanwhile tags in user forks are typically used to track postings of
specific patch series versions. It is expected that a contributor
will have tested before sending the patch series. Thus pipelines for
the default branch and tag pushes in forks are redundant too.
This patch makes use of the 'workflow:' configuration to setup rules
that apply to the entire pipeline. The rules allow pipelines to be
created ONLY in response to:
- Push events to a non-default branch
- Scheduled pipelines
- REST API pipeline triggers
- Web UI pipeline triggers
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
---
.gitlab-ci.d/qemu-project.yml | 1 +
.gitlab-ci.d/workflow.yml | 56 +++++++++++++++++++++++++++++++++++
2 files changed, 57 insertions(+)
create mode 100644 .gitlab-ci.d/workflow.yml
diff --git a/.gitlab-ci.d/qemu-project.yml b/.gitlab-ci.d/qemu-project.yml
index b3d79bc429..13202e31e9 100644
--- a/.gitlab-ci.d/qemu-project.yml
+++ b/.gitlab-ci.d/qemu-project.yml
@@ -2,6 +2,7 @@
# https://gitlab.com/qemu-project/qemu/-/pipelines
include:
+ - local: '/.gitlab-ci.d/workflow.yml'
- local: '/.gitlab-ci.d/stages.yml'
- local: '/.gitlab-ci.d/edk2.yml'
- local: '/.gitlab-ci.d/opensbi.yml'
diff --git a/.gitlab-ci.d/workflow.yml b/.gitlab-ci.d/workflow.yml
new file mode 100644
index 0000000000..5c877bae11
--- /dev/null
+++ b/.gitlab-ci.d/workflow.yml
@@ -0,0 +1,56 @@
+
+# This defines global scenarios for controlling execution of the
+# entire pipeline. The pipelines are set to run when
+#
+# - Pushing to a non-default branch
+# - Triggered via REST API
+# - Triggered via Web UI
+# - Regular scheduled run
+#
+workflow:
+ rules:
+ # For the main repo, prior to merging a patch series, CI is run
+ # on the "staging" branch. The result gates whether the series
+ # is then pushed to the default branch.
+ #
+ # For user forks, the default branch is typically unused or
+ # otherwise just tracks the main repo default branch in an
+ # adhoc manner. Work is typically done on feature branches
+ # instead.
+ #
+ # In neither case do we wish to run CI pipelines for the
+ # default branch
+ - if: '$CI_PIPELINE_SOURCE == "push" && $CI_PROJECT_NAMESPACE == "qemu-project" && $CI_COMMIT_BRANCH == $CI_DEFAULT_BRANCH'
+ when: never
+
+ # For the main repo, tags represent official releases.
+ # The branch associated with the release will have passed
+ # a CI pipeline already
+ #
+ # For user forks, tags are often added by tools like
+ # git-publish at the same time as pushing the branch.
+ #
+ # In neither case do we wish to run CI pipelines for tags
+ - if: '$CI_PIPELINE_SOURCE == "push" && $CI_COMMIT_TAG'
+ when: never
+
+ # Run CI on any git pushes to remaining non-dfault branches
+ - if: '$CI_PIPELINE_SOURCE == "push" && $CI_COMMIT_BRANCH'
+ when: always
+
+ # Run CI on any regular scheduled pipelines (ie nightly builds)
+ - if: '$CI_PIPELINE_SOURCE == "schedule"'
+ when: always
+
+ # Run CI if user invokes a pipeline using explicit REST API call
+ - if: '$CI_PIPELINE_SOURCE == "api"'
+ when: always
+
+ # Run CI if user invokes a pipeline using Web UI
+ - if: '$CI_PIPELINE_SOURCE == "web"'
+ when: always
+
+ # Don't run CI in any other scenario ($CI_PIPELINE_SOURCE values
+ # covering: external, chat, webide, merge_request_event,
+ # external_pull_request_event, parent_pipeline, trigger, or pipeline)
+ - when: never
--
2.31.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 2/2] gitlab: cut down on jobs run by default in user forks
2021-07-19 12:12 [PATCH 0/2] gitlab: limit jobs executed in most pipelines by default Daniel P. Berrangé
2021-07-19 12:12 ` [PATCH 1/2] gitlab: prevent CI jobs running pushes to default branch or tags Daniel P. Berrangé
@ 2021-07-19 12:12 ` Daniel P. Berrangé
1 sibling, 0 replies; 3+ messages in thread
From: Daniel P. Berrangé @ 2021-07-19 12:12 UTC (permalink / raw)
To: qemu-devel
Cc: Thomas Huth, Daniel P. Berrangé, Philippe Mathieu-Daudé,
Wainer dos Santos Moschetta, Willian Rampazzo, Alex Bennée
Currently pushes to user forks run the same set of build / test jobs as
pushes to the main repo. This results in creation of 120+ individual
jobs. While it is useful for subsystem maintainers, and even regular
contributors to be able to run the full set of jobs, it is wasteful to
run all of them all the time.
This patch sets up rules to cut down on the jobs run by default to only
only cover a fairly typical set of combinations, which ought to catch
the majority of common breakage
- Fedora, CentOS, Ubuntu & Debian system emulator builds
to cover all arch targets.
- Linux user static build
- Cross build i386 (to identify any 32-bit build issues)
- Cross build s390x (to identify any big endian build issues)
- Containers needed for the above
- Cirrus CI FreeBSD 12 and macOS 11 (to identify non-Linux issues)
That ends up being the following jobs:
Containers stage
- amd64-centos8-container
- amd64-debian10-container
- amd64-fedora-container
- amd64-ubuntu2004-container
- win32-fedora-container
Containers layer2 stage
- amd64-debian-container
- i386-fedora-cross-container
- s390x-debian-cross-container
Build stage
- build-system-centos
- build-system-debian
- build-system-fedora
- build-system-ubuntu
- build-tools-and-docs-debian
- build-user-static
- check-dco
- check-patch
- cross-i386-system
- cross-s390x-system
- cross-win32-system
- x64-freebsd-13-build
- x64-macos-11-build
Test stage
- check-system-centos
- check-system-debian
- check-system-fedora
- check-system-ubuntu
- pages
This gives a reduction from 120+ jobs to 26. It could potentially be
cut down more if we re-arrange the split of targets for the four
build-system-XXX jobs, if we don't want to test all possible arch
targets by default for all contributors (maybe only x86_64 and aarch64
by default) This is left as a future area to explore.
When using inherited templates together with rules, it is ill-defined
what the semantics are when both the template and job define rules.
Thus logic is controlled by create a template containining job rules,
that is then inherited by all jobs / job templates. Individual jobs
can tweak the effect of the inherited rules by setting variables.
The set of default jobs are identified by existance of a special
variable:
- QEMU_CI_DEFAULT_JOB: 1
To trigger remaining non-default jobs, push to a branch called
'ci-XXXXX', or set a git push option. e.g. one of:
$ git push ci-somefeature
$ git push -o "ci.variable=QEMU_CI=1" somefeature
Jobs can be marked to never run automatically using the variable:
- QEMU_CI_MANUAL_JOB: 1
Jobs that provide acceptance (functional/integration) tests are
designated using
- QEMU_CI_ACCEPTANCE_JOB: 1
These are not run unless pushing to the 'staging' branch of the
main repo. They can be optionally run in other scenarios by pushing
to a branch 'ci-acceptance-XXX', or by setting an additional git
push option, together with the previously CI configurations.
e.g. one of:
$ git push ci-acceptance-somefeature
$ git push -o "ci.variable=QEMU_CI_ACEPTANCE=1" ci-somefeature
$ git push -o "ci.variable=QEMU_CI_ACEPTANCE=1" -o "ci.variable=QEMU_CI=1" somefeature
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
---
.gitlab-ci.d/buildtest-template.yml | 17 ++----
.gitlab-ci.d/buildtest.yml | 14 +++++
.gitlab-ci.d/cirrus.yml | 5 +-
.gitlab-ci.d/container-core.yml | 3 +
.gitlab-ci.d/container-cross.yml | 9 +--
.gitlab-ci.d/container-template.yml | 1 +
.gitlab-ci.d/containers.yml | 2 +
.gitlab-ci.d/crossbuild-template.yml | 3 +
.gitlab-ci.d/crossbuilds.yml | 3 +
.gitlab-ci.d/workflow.yml | 90 ++++++++++++++++++++++++++++
.gitlab-ci.yml | 21 +------
11 files changed, 131 insertions(+), 37 deletions(-)
diff --git a/.gitlab-ci.d/buildtest-template.yml b/.gitlab-ci.d/buildtest-template.yml
index 3e3e19d96b..069f8d9d2d 100644
--- a/.gitlab-ci.d/buildtest-template.yml
+++ b/.gitlab-ci.d/buildtest-template.yml
@@ -1,4 +1,6 @@
+
.native_build_job_template:
+ extends: .job_workflow
stage: build
image: $CI_REGISTRY_IMAGE/qemu/$IMAGE:latest
before_script:
@@ -27,6 +29,7 @@
fi
.native_test_job_template:
+ extends: .job_workflow
stage: test
image: $CI_REGISTRY_IMAGE/qemu/$IMAGE:latest
script:
@@ -67,15 +70,5 @@
after_script:
- cd build
- du -chs ${CI_PROJECT_DIR}/avocado-cache
- rules:
- # Only run these jobs if running on the mainstream namespace,
- # or if the user set the QEMU_CI_AVOCADO_TESTING variable (either
- # in its namespace setting or via git-push option, see documentation
- # in /.gitlab-ci.yml of this repository).
- - if: '$CI_PROJECT_NAMESPACE == "qemu-project"'
- when: always
- - if: '$QEMU_CI_AVOCADO_TESTING'
- when: always
- # Otherwise, set to manual (the jobs are created but not run).
- - when: manual
- allow_failure: true
+ variables:
+ - QEMU_CI_ACCEPTANCE_JOB: 1
diff --git a/.gitlab-ci.d/buildtest.yml b/.gitlab-ci.d/buildtest.yml
index 89df51517c..8ea31f4036 100644
--- a/.gitlab-ci.d/buildtest.yml
+++ b/.gitlab-ci.d/buildtest.yml
@@ -40,6 +40,7 @@ build-system-ubuntu:
needs:
job: amd64-ubuntu2004-container
variables:
+ QEMU_CI_DEFAULT_JOB: 1
IMAGE: ubuntu2004
CONFIGURE_ARGS: --enable-docs --enable-fdt=system --enable-slirp=system
TARGETS: aarch64-softmmu alpha-softmmu cris-softmmu hppa-softmmu
@@ -56,6 +57,7 @@ check-system-ubuntu:
- job: build-system-ubuntu
artifacts: true
variables:
+ QEMU_CI_DEFAULT_JOB: 1
IMAGE: ubuntu2004
MAKE_CHECK_ARGS: check
@@ -73,6 +75,7 @@ build-system-debian:
needs:
job: amd64-debian-container
variables:
+ QEMU_CI_DEFAULT_JOB: 1
IMAGE: debian-amd64
CONFIGURE_ARGS: --enable-fdt=system
TARGETS: arm-softmmu avr-softmmu i386-softmmu mipsel-softmmu
@@ -89,6 +92,7 @@ check-system-debian:
- job: build-system-debian
artifacts: true
variables:
+ QEMU_CI_DEFAULT_JOB: 1
IMAGE: debian-amd64
MAKE_CHECK_ARGS: check
@@ -106,6 +110,7 @@ build-system-fedora:
needs:
job: amd64-fedora-container
variables:
+ QEMU_CI_DEFAULT_JOB: 1
IMAGE: fedora
CONFIGURE_ARGS: --disable-gcrypt --enable-nettle --enable-docs
--enable-fdt=system --enable-slirp=system --enable-capstone=system
@@ -123,6 +128,7 @@ check-system-fedora:
- job: build-system-fedora
artifacts: true
variables:
+ QEMU_CI_DEFAULT_JOB: 1
IMAGE: fedora
MAKE_CHECK_ARGS: check
@@ -140,6 +146,7 @@ build-system-centos:
needs:
job: amd64-centos8-container
variables:
+ QEMU_CI_DEFAULT_JOB: 1
IMAGE: centos8
CONFIGURE_ARGS: --disable-nettle --enable-gcrypt --enable-fdt=system
--enable-modules --enable-trace-backends=dtrace
@@ -157,6 +164,7 @@ check-system-centos:
- job: build-system-centos
artifacts: true
variables:
+ QEMU_CI_DEFAULT_JOB: 1
IMAGE: centos8
MAKE_CHECK_ARGS: check
@@ -325,6 +333,7 @@ build-user-static:
needs:
job: amd64-debian-user-cross-container
variables:
+ QEMU_CI_DEFAULT_JOB: 1
IMAGE: debian-all-test-cross
CONFIGURE_ARGS: --disable-tools --disable-system --static
MAKE_CHECK_ARGS: check-tcg
@@ -634,6 +643,7 @@ build-without-default-features:
MAKE_CHECK_ARGS: check-unit
build-libvhost-user:
+ extends: .job_workflow
stage: build
image: $CI_REGISTRY_IMAGE/qemu/fedora:latest
needs:
@@ -653,6 +663,7 @@ build-tools-and-docs-debian:
needs:
job: amd64-debian-container
variables:
+ QEMU_CI_DEFAULT_JOB: 1
IMAGE: debian-amd64
MAKE_CHECK_ARGS: check-unit check-softfloat ctags TAGS cscope
CONFIGURE_ARGS: --disable-system --disable-user --enable-docs --enable-tools
@@ -664,10 +675,13 @@ build-tools-and-docs-debian:
# Prepare for GitLab pages deployment. Anything copied into the
# "public" directory will be deployed to $USER.gitlab.io/$PROJECT
pages:
+ extends: .native_build_job_template
image: $CI_REGISTRY_IMAGE/qemu/debian-amd64:latest
stage: test
needs:
- job: build-tools-and-docs-debian
+ variables:
+ QEMU_CI_DEFAULT_JOB: 1
script:
- mkdir -p public
# HTML-ised source tree
diff --git a/.gitlab-ci.d/cirrus.yml b/.gitlab-ci.d/cirrus.yml
index 60b13ed83f..d76eb18477 100644
--- a/.gitlab-ci.d/cirrus.yml
+++ b/.gitlab-ci.d/cirrus.yml
@@ -11,6 +11,7 @@
# special care, because we can't just override it at the GitLab CI job
# definition level or we risk breaking it completely.
.cirrus_build_job:
+ extends: .job_workflow
stage: build
image: registry.gitlab.com/libvirt/libvirt-ci/cirrus-run:master
needs: []
@@ -39,8 +40,6 @@
<.gitlab-ci.d/cirrus/build.yml >.gitlab-ci.d/cirrus/$NAME.yml
- cat .gitlab-ci.d/cirrus/$NAME.yml
- cirrus-run -v --show-build-log always .gitlab-ci.d/cirrus/$NAME.yml
- rules:
- - if: "$CIRRUS_GITHUB_REPO && $CIRRUS_API_TOKEN"
x64-freebsd-12-build:
extends: .cirrus_build_job
@@ -61,6 +60,7 @@ x64-freebsd-12-build:
x64-freebsd-13-build:
extends: .cirrus_build_job
variables:
+ QEMU_CI_DEFAULT_JOB: 1
NAME: freebsd-13
CIRRUS_VM_INSTANCE_TYPE: freebsd_instance
CIRRUS_VM_IMAGE_SELECTOR: image_family
@@ -74,6 +74,7 @@ x64-freebsd-13-build:
x64-macos-11-base-build:
extends: .cirrus_build_job
variables:
+ QEMU_CI_DEFAULT_JOB: 1
NAME: macos-11
CIRRUS_VM_INSTANCE_TYPE: osx_instance
CIRRUS_VM_IMAGE_SELECTOR: image
diff --git a/.gitlab-ci.d/container-core.yml b/.gitlab-ci.d/container-core.yml
index e8dd1f476a..38be992593 100644
--- a/.gitlab-ci.d/container-core.yml
+++ b/.gitlab-ci.d/container-core.yml
@@ -4,14 +4,17 @@ include:
amd64-centos8-container:
extends: .container_job_template
variables:
+ QEMU_CI_DEFAULT_JOB: 1
NAME: centos8
amd64-fedora-container:
extends: .container_job_template
variables:
+ QEMU_CI_DEFAULT_JOB: 1
NAME: fedora
amd64-debian10-container:
extends: .container_job_template
variables:
+ QEMU_CI_DEFAULT_JOB: 1
NAME: debian10
diff --git a/.gitlab-ci.d/container-cross.yml b/.gitlab-ci.d/container-cross.yml
index 0fcebe363a..1f41c88f11 100644
--- a/.gitlab-ci.d/container-cross.yml
+++ b/.gitlab-ci.d/container-cross.yml
@@ -50,13 +50,11 @@ armhf-debian-cross-container:
# We never want to build hexagon in the CI system and by default we
# always want to refer to the master registry where it lives.
hexagon-cross-container:
+ extends: .job_workflow
image: docker:stable
stage: containers
- rules:
- - if: '$CI_PROJECT_NAMESPACE == "qemu-project"'
- when: never
- - when: always
variables:
+ QEMU_CI_MANUAL_JOB: 1
NAME: debian-hexagon-cross
GIT_DEPTH: 1
services:
@@ -143,6 +141,7 @@ s390x-debian-cross-container:
stage: containers-layer2
needs: ['amd64-debian10-container']
variables:
+ QEMU_CI_DEFAULT_JOB: 1
NAME: debian-s390x-cross
sh4-debian-cross-container:
@@ -179,11 +178,13 @@ cris-fedora-cross-container:
i386-fedora-cross-container:
extends: .container_job_template
variables:
+ QEMU_CI_DEFAULT_JOB: 1
NAME: fedora-i386-cross
win32-fedora-cross-container:
extends: .container_job_template
variables:
+ QEMU_CI_DEFAULT_JOB: 1
NAME: fedora-win32-cross
win64-fedora-cross-container:
diff --git a/.gitlab-ci.d/container-template.yml b/.gitlab-ci.d/container-template.yml
index 1baecd9460..5bf6360260 100644
--- a/.gitlab-ci.d/container-template.yml
+++ b/.gitlab-ci.d/container-template.yml
@@ -1,4 +1,5 @@
.container_job_template:
+ extends: .job_workflow
image: docker:stable
stage: containers
services:
diff --git a/.gitlab-ci.d/containers.yml b/.gitlab-ci.d/containers.yml
index cd06d3f5f4..b1c5bc6e6e 100644
--- a/.gitlab-ci.d/containers.yml
+++ b/.gitlab-ci.d/containers.yml
@@ -17,6 +17,7 @@ amd64-debian-container:
stage: containers-layer2
needs: ['amd64-debian10-container']
variables:
+ QEMU_CI_DEFAULT_JOB: 1
NAME: debian-amd64
amd64-ubuntu1804-container:
@@ -27,6 +28,7 @@ amd64-ubuntu1804-container:
amd64-ubuntu2004-container:
extends: .container_job_template
variables:
+ QEMU_CI_DEFAULT_JOB: 1
NAME: ubuntu2004
amd64-ubuntu-container:
diff --git a/.gitlab-ci.d/crossbuild-template.yml b/.gitlab-ci.d/crossbuild-template.yml
index 1be541174c..5f6839cc21 100644
--- a/.gitlab-ci.d/crossbuild-template.yml
+++ b/.gitlab-ci.d/crossbuild-template.yml
@@ -1,4 +1,5 @@
.cross_system_build_job:
+ extends: .job_workflow
stage: build
image: $CI_REGISTRY_IMAGE/qemu/$IMAGE:latest
timeout: 80m
@@ -18,6 +19,7 @@
# KVM), and set extra options (such disabling other accelerators) via the
# $EXTRA_CONFIGURE_OPTS variable.
.cross_accel_build_job:
+ extends: .job_workflow
stage: build
image: $CI_REGISTRY_IMAGE/qemu/$IMAGE:latest
timeout: 30m
@@ -30,6 +32,7 @@
- make -j$(expr $(nproc) + 1) all check-build $MAKE_CHECK_ARGS
.cross_user_build_job:
+ extends: .job_workflow
stage: build
image: $CI_REGISTRY_IMAGE/qemu/$IMAGE:latest
script:
diff --git a/.gitlab-ci.d/crossbuilds.yml b/.gitlab-ci.d/crossbuilds.yml
index 6b3865c9e8..83dd17041b 100644
--- a/.gitlab-ci.d/crossbuilds.yml
+++ b/.gitlab-ci.d/crossbuilds.yml
@@ -48,6 +48,7 @@ cross-i386-system:
needs:
job: i386-fedora-cross-container
variables:
+ QEMU_CI_DEFAULT_JOB: 1
IMAGE: fedora-i386-cross
MAKE_CHECK_ARGS: check-qtest
@@ -129,6 +130,7 @@ cross-s390x-system:
needs:
job: s390x-debian-cross-container
variables:
+ QEMU_CI_DEFAULT_JOB: 1
IMAGE: debian-s390x-cross
cross-s390x-user:
@@ -159,6 +161,7 @@ cross-win32-system:
needs:
job: win32-fedora-cross-container
variables:
+ QEMU_CI_DEFAULT_JOB: 1
IMAGE: fedora-win32-cross
cross-win64-system:
diff --git a/.gitlab-ci.d/workflow.yml b/.gitlab-ci.d/workflow.yml
index 5c877bae11..4803d6dcd2 100644
--- a/.gitlab-ci.d/workflow.yml
+++ b/.gitlab-ci.d/workflow.yml
@@ -54,3 +54,93 @@ workflow:
# covering: external, chat, webide, merge_request_event,
# external_pull_request_event, parent_pipeline, trigger, or pipeline)
- when: never
+
+
+# This defines rules used to control individual job execution
+#
+# By default only a small subset of jobs are run, to give a
+# basic sanity check of the build. The set of default jobs
+# are identified by existance of a special variable:
+#
+# - QEMU_CI_DEFAULT_JOB: 1
+#
+# To trigger remaining non-default jobs, push to a branch
+# called 'ci-XXXXX', or set a git push option. e.g. one of:
+#
+# $ git push ci-somefeature
+# $ git push -o "ci.variable=QEMU_CI=1" somefeature
+#
+# Jobs can be marked to never run automatically using the
+# variable:
+#
+# - QEMU_CI_MANUAL_JOB: 1
+#
+# Jobs that provide acceptance (functional/integration) tests
+# are designated using
+#
+# - QEMU_CI_ACCEPTANCE_JOB: 1
+#
+# These are not run unless pushing to the 'staging' branch of
+# the main repo. They can be optionally run in other scenarios
+# by pushing to a branch 'ci-acceptance-XXX', or by setting an
+# additional git push option, together with the previously
+# CI configurations. e.g. one of:
+#
+# $ git push ci-acceptance-somefeature
+# $ git push -o "ci.variable=QEMU_CI_ACEPTANCE=1" ci-somefeature
+# $ git push -o "ci.variable=QEMU_CI_ACEPTANCE=1" -o "ci.variable=QEMU_CI=1" somefeature
+#
+.job_workflow:
+ rules:
+ # Skip any cirrus job if either repo or api token are missing
+ - if: '$CIRRUS_VM_INSTANCE_TYPE && ($CIRRUS_GITHUB_REPO == null || $CIRRUS_API_TOKEN == null)'
+ when: never
+
+ # Any jobs marked as manual, never get automatically run in any scenario
+ - if: '$QEMU_CI_MANUAL_JOB'
+ when: manual
+ allow_failure: true
+
+ # Run all jobs for main repo staging branch, including acceptance jobs
+ - if: '$CI_PROJECT_NAMESPACE == "qemu-project" && $CI_COMMIT_BRANCH == "staging"'
+ when: always
+
+ # If pushing to a branch with name prefix 'ci-acceptance-', then run
+ # acceptance tests, in addition to other jobs
+ - if: '$CI_COMMIT_BRANCH =~ /^ci-acceptance-/ && $QEMU_CI_ACCEPTANCE_JOB'
+ when: always
+
+ # If user requested acceptance tests using 'git push' option to
+ # set QEMU_CI_ACCEPTANCE=1, with branch ci-XXXX
+ - if: '$CI_COMMIT_BRANCH =~ /^ci-/ && $QEMU_CI_ACCEPTANCE_JOB && $QEMU_CI_ACCEPTANCE'
+ when: always
+
+ # If user requested acceptance tests using 'git push' option to
+ # set QEMU_CI_ACCEPTANCE=1, with varaible QEMU_CI=1
+ - if: '$QEMU_CI && $QEMU_CI_ACCEPTANCE_JOB && $QEMU_CI_ACCEPTANCE'
+ when: always
+
+ # Otherwise never run acceptance tests, but allow manual trigger
+ - if: '$QEMU_CI_ACCEPTANCE_JOB'
+ when: manual
+ allow_failure: true
+
+ # If pushing to a branch with name prefix 'ci-', then run all jobs
+ - if: '$CI_COMMIT_BRANCH =~ /^ci-/'
+ when: always
+
+ # If user requested CI using 'git push -o ci.variable="QEMU_CI=1"',
+ # then run all jobs
+ - if: '$QEMU_CI'
+ when: always
+
+ # If user pushed in any other way, only default the small
+ # number of default jobs needed to sanity check basic build
+ - if: '$QEMU_CI_DEFAULT_JOB == "1"'
+ when: always
+
+ # Any other scenario, let the jobs be manually triggered.
+ # Set to be non-fatal, so that pending manual jobs don't
+ # affect overall pipeline status
+ - when: manual
+ allow_failure: true
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 6dc5385e69..f95d2b65f1 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -15,25 +15,8 @@
#
# QEMU CI jobs are based on templates. Some templates provide
# user-configurable options, modifiable via configuration variables.
-#
-# These variables can be set globally in the user's CI namespace
-# setting:
-# https://docs.gitlab.com/ee/ci/variables/#create-a-custom-variable-in-the-ui
-# or set manually each time a branch/tag is pushed, as a git-push
-# command line argument:
-# https://docs.gitlab.com/ee/user/project/push_options.html#push-options-for-gitlab-cicd
-#
-# Example setting the QEMU_CI_EXAMPLE_VAR variable:
-#
-# git push -o ci.variable="QEMU_CI_EXAMPLE_VAR=value" myrepo mybranch
-#
-# ----------------------------------------------------------------------
-#
-# List of environment variables that can be use to modify the set
-# of jobs selected:
-#
-# - QEMU_CI_AVOCADO_TESTING
-# If set, tests using the Avocado framework will be run
+# Refer to 'workflow.yml' for guidance on how to trigger non-default
+# jobs using git push options, or special branch names
include:
- local: '/.gitlab-ci.d/qemu-project.yml'
--
2.31.1
^ permalink raw reply related [flat|nested] 3+ messages in thread