[PATCH v2 8/9] hw/arm: xlnx-zynqmp: Add Xilinx eFUSE device

[Tong Ho <tong.ho@xilinx.com>]

Connect the support for ZynqMP eFUSE one-time field-programmable
bit array.

Signed-off-by: Tong Ho <tong.ho@xilinx.com>
---
 hw/arm/xlnx-zynqmp.c         | 29 +++++++++++++++++++++++++++++
 include/hw/arm/xlnx-zynqmp.h |  3 +++
 2 files changed, 32 insertions(+)

diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
index 8e39b7d6c7..9e458ad1c0 100644
--- a/hw/arm/xlnx-zynqmp.c
+++ b/hw/arm/xlnx-zynqmp.c
@@ -65,6 +65,9 @@
 #define BBRAM_ADDR          0xffcd0000
 #define BBRAM_IRQ           11
 
+#define EFUSE_ADDR          0xffcc0000
+#define EFUSE_IRQ           87
+
 #define SDHCI_CAPABILITIES  0x280737ec6481 /* Datasheet: UG1085 (v1.7) */
 
 static const uint64_t gem_addr[XLNX_ZYNQMP_NUM_GEMS] = {
@@ -241,6 +244,31 @@ static void xlnx_zynqmp_create_bbram(XlnxZynqMPState *s, qemu_irq *gic)
     sysbus_connect_irq(sbd, 0, gic[BBRAM_IRQ]);
 }
 
+static void xlnx_zynqmp_create_efuse(XlnxZynqMPState *s, qemu_irq *gic)
+{
+    Object *bits = OBJECT(&s->efuse_bits);
+    Object *ctrl = OBJECT(&s->efuse);
+    SysBusDevice *sbd;
+
+    object_initialize_child(OBJECT(s), "efuse", &s->efuse,
+                            TYPE_XLNX_ZYNQMP_EFUSE);
+
+    object_initialize_child_with_props(ctrl, "efuse-bits", bits,
+                                       sizeof(s->efuse_bits),
+                                       TYPE_XLNX_EFUSE, &error_abort,
+                                       "efuse-nr", "3",
+                                       "efuse-size", "2048",
+                                       NULL);
+
+    qdev_realize(DEVICE(bits), NULL, &error_abort);
+    object_property_set_link(ctrl, "efuse", bits, &error_abort);
+
+    sbd = SYS_BUS_DEVICE(ctrl);
+    sysbus_realize(sbd, &error_abort);
+    sysbus_mmio_map(sbd, 0, EFUSE_ADDR);
+    sysbus_connect_irq(sbd, 0, gic[EFUSE_IRQ]);
+}
+
 static void xlnx_zynqmp_init(Object *obj)
 {
     MachineState *ms = MACHINE(qdev_get_machine());
@@ -636,6 +664,7 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0, gic_spi[RTC_IRQ]);
 
     xlnx_zynqmp_create_bbram(s, gic_spi);
+    xlnx_zynqmp_create_efuse(s, gic_spi);
 
     for (i = 0; i < XLNX_ZYNQMP_NUM_GDMA_CH; i++) {
         if (!object_property_set_uint(OBJECT(&s->gdma[i]), "bus-width", 128,
diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h
index 07ebcefbab..876e8bf4e3 100644
--- a/include/hw/arm/xlnx-zynqmp.h
+++ b/include/hw/arm/xlnx-zynqmp.h
@@ -37,6 +37,7 @@
 #include "net/can_emu.h"
 #include "hw/dma/xlnx_csu_dma.h"
 #include "hw/nvram/xlnx-bbram.h"
+#include "hw/nvram/xlnx-zynqmp-efuse.h"
 
 #define TYPE_XLNX_ZYNQMP "xlnx-zynqmp"
 OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP)
@@ -97,6 +98,8 @@ struct XlnxZynqMPState {
     MemoryRegion *ddr_ram;
     MemoryRegion ddr_ram_low, ddr_ram_high;
     XlnxBBRam bbram;
+    XlnxZynqMPEFuse efuse;
+    XLNXEFuse efuse_bits;
 
     CadenceGEMState gem[XLNX_ZYNQMP_NUM_GEMS];
     CadenceUARTState uart[XLNX_ZYNQMP_NUM_UARTS];
-- 
2.25.1