From: David Gibson <david@gibson.dropbear.id.au>
To: peter.maydell@linaro.org, groug@kaod.org
Cc: "Lucas Mateus Castro \(alqotel\)" <lucas.araujo@eldorado.org.br>,
qemu-ppc@nongnu.org, qemu-devel@nongnu.org,
David Gibson <david@gibson.dropbear.id.au>
Subject: [PULL 04/18] target/ppc: moved ppc_store_sdr1 to mmu_common.c
Date: Fri, 27 Aug 2021 17:09:32 +1000 [thread overview]
Message-ID: <20210827070946.219970-5-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <20210827070946.219970-1-david@gibson.dropbear.id.au>
From: "Lucas Mateus Castro (alqotel)" <lucas.araujo@eldorado.org.br>
ppc_store_sdr1 was at first in mmu_helper.c and was moved as part
the patches to enable the disable-tcg option, now it's being moved
back to a file that will be compiled with that option
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Message-Id: <20210723175627.72847-3-lucas.araujo@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
target/ppc/cpu.c | 28 ----------------------------
target/ppc/mmu_common.c | 26 ++++++++++++++++++++++++++
2 files changed, 26 insertions(+), 28 deletions(-)
diff --git a/target/ppc/cpu.c b/target/ppc/cpu.c
index a29299882a..7ad9bd6044 100644
--- a/target/ppc/cpu.c
+++ b/target/ppc/cpu.c
@@ -67,34 +67,6 @@ uint32_t ppc_get_vscr(CPUPPCState *env)
return env->vscr | (sat << VSCR_SAT);
}
-#ifdef CONFIG_SOFTMMU
-void ppc_store_sdr1(CPUPPCState *env, target_ulong value)
-{
- PowerPCCPU *cpu = env_archcpu(env);
- qemu_log_mask(CPU_LOG_MMU, "%s: " TARGET_FMT_lx "\n", __func__, value);
- assert(!cpu->env.has_hv_mode || !cpu->vhyp);
-#if defined(TARGET_PPC64)
- if (mmu_is_64bit(env->mmu_model)) {
- target_ulong sdr_mask = SDR_64_HTABORG | SDR_64_HTABSIZE;
- target_ulong htabsize = value & SDR_64_HTABSIZE;
-
- if (value & ~sdr_mask) {
- qemu_log_mask(LOG_GUEST_ERROR, "Invalid bits 0x"TARGET_FMT_lx
- " set in SDR1", value & ~sdr_mask);
- value &= sdr_mask;
- }
- if (htabsize > 28) {
- qemu_log_mask(LOG_GUEST_ERROR, "Invalid HTABSIZE 0x" TARGET_FMT_lx
- " stored in SDR1", htabsize);
- return;
- }
- }
-#endif /* defined(TARGET_PPC64) */
- /* FIXME: Should check for valid HTABMASK values in 32-bit case */
- env->spr[SPR_SDR1] = value;
-}
-#endif /* CONFIG_SOFTMMU */
-
/* GDBstub can read and write MSR... */
void ppc_store_msr(CPUPPCState *env, target_ulong value)
{
diff --git a/target/ppc/mmu_common.c b/target/ppc/mmu_common.c
index ec4dce4ddc..a0518f611b 100644
--- a/target/ppc/mmu_common.c
+++ b/target/ppc/mmu_common.c
@@ -58,6 +58,32 @@
# define LOG_BATS(...) do { } while (0)
#endif
+void ppc_store_sdr1(CPUPPCState *env, target_ulong value)
+{
+ PowerPCCPU *cpu = env_archcpu(env);
+ qemu_log_mask(CPU_LOG_MMU, "%s: " TARGET_FMT_lx "\n", __func__, value);
+ assert(!cpu->env.has_hv_mode || !cpu->vhyp);
+#if defined(TARGET_PPC64)
+ if (mmu_is_64bit(env->mmu_model)) {
+ target_ulong sdr_mask = SDR_64_HTABORG | SDR_64_HTABSIZE;
+ target_ulong htabsize = value & SDR_64_HTABSIZE;
+
+ if (value & ~sdr_mask) {
+ qemu_log_mask(LOG_GUEST_ERROR, "Invalid bits 0x"TARGET_FMT_lx
+ " set in SDR1", value & ~sdr_mask);
+ value &= sdr_mask;
+ }
+ if (htabsize > 28) {
+ qemu_log_mask(LOG_GUEST_ERROR, "Invalid HTABSIZE 0x" TARGET_FMT_lx
+ " stored in SDR1", htabsize);
+ return;
+ }
+ }
+#endif /* defined(TARGET_PPC64) */
+ /* FIXME: Should check for valid HTABMASK values in 32-bit case */
+ env->spr[SPR_SDR1] = value;
+}
+
/*****************************************************************************/
/* PowerPC MMU emulation */
--
2.31.1
next prev parent reply other threads:[~2021-08-27 7:13 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-27 7:09 [PULL 00/18] ppc-for-6.2 queue 20210827 David Gibson
2021-08-27 7:09 ` [PULL 01/18] xive: Remove extra '0x' prefix in trace events David Gibson
2021-08-27 7:09 ` [PULL 02/18] spapr_pci: Fix leak in spapr_phb_vfio_get_loc_code() with g_autofree David Gibson
2021-08-27 7:09 ` [PULL 03/18] target/ppc: divided mmu_helper.c in 2 files David Gibson
2021-08-27 7:09 ` David Gibson [this message]
2021-08-27 7:09 ` [PULL 05/18] target/ppc: moved store_40x_sler to helper_regs.c David Gibson
2021-08-27 7:09 ` [PULL 06/18] ppc/pnv: update skiboot to commit 820d43c0a775 David Gibson
2021-08-27 7:09 ` [PULL 07/18] ppc: Add a POWER10 DD2 CPU David Gibson
2021-08-27 7:09 ` [PULL 08/18] ppc/pnv: Change the POWER10 machine to support DD2 only David Gibson
2021-08-27 7:09 ` [PULL 09/18] ppc/pnv: powerpc_excp: Do not discard HDECR exception when entering power-saving mode David Gibson
2021-08-27 7:09 ` [PULL 10/18] ppc/pnv: Use a simple incrementing index for the chip-id David Gibson
2021-08-27 7:09 ` [PULL 11/18] ppc/pnv: Distribute RAM among the chips David Gibson
2021-08-27 7:09 ` [PULL 12/18] ppc/pnv: add a chip topology index for POWER10 David Gibson
2021-08-27 7:09 ` [PULL 13/18] ppc/xive: Export PQ get/set routines David Gibson
2021-08-27 7:09 ` [PULL 14/18] ppc/xive: Export xive_presenter_notify() David Gibson
2021-08-27 7:09 ` [PULL 15/18] include/qemu/int128.h: define struct Int128 according to the host endianness David Gibson
2021-08-27 7:09 ` [PULL 16/18] target/ppc: fix vextu[bhw][lr]x helpers David Gibson
2021-08-27 7:09 ` [PULL 17/18] include/qemu/int128.h: introduce bswap128s David Gibson
2021-08-27 7:09 ` [PULL 18/18] target/ppc: fix vector registers access in gdbstub for little-endian David Gibson
2021-08-28 14:13 ` [PULL 00/18] ppc-for-6.2 queue 20210827 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210827070946.219970-5-david@gibson.dropbear.id.au \
--to=david@gibson.dropbear.id.au \
--cc=groug@kaod.org \
--cc=lucas.araujo@eldorado.org.br \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).