From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PATCH 21/48] tcg/optimize: Split out fold_addsub2_i32
Date: Sun, 29 Aug 2021 23:24:24 -0700 [thread overview]
Message-ID: <20210830062451.639572-22-richard.henderson@linaro.org> (raw)
In-Reply-To: <20210830062451.639572-1-richard.henderson@linaro.org>
Add two additional helpers, fold_add2_i32 and fold_sub2_i32
which will not be simple wrappers forever.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
tcg/optimize.c | 70 +++++++++++++++++++++++++++++++-------------------
1 file changed, 44 insertions(+), 26 deletions(-)
diff --git a/tcg/optimize.c b/tcg/optimize.c
index dbe283cedb..b72fe6e847 100644
--- a/tcg/optimize.c
+++ b/tcg/optimize.c
@@ -704,6 +704,39 @@ static bool fold_add(OptContext *ctx, TCGOp *op)
return fold_const2(ctx, op);
}
+static bool fold_addsub2_i32(OptContext *ctx, TCGOp *op, bool add)
+{
+ if (arg_is_const(op->args[2]) && arg_is_const(op->args[3]) &&
+ arg_is_const(op->args[4]) && arg_is_const(op->args[5])) {
+ uint32_t al = arg_info(op->args[2])->val;
+ uint32_t ah = arg_info(op->args[3])->val;
+ uint32_t bl = arg_info(op->args[4])->val;
+ uint32_t bh = arg_info(op->args[5])->val;
+ uint64_t a = ((uint64_t)ah << 32) | al;
+ uint64_t b = ((uint64_t)bh << 32) | bl;
+ TCGArg rl, rh;
+ TCGOp *op2 = tcg_op_insert_before(ctx->tcg, op, INDEX_op_mov_i32);
+
+ if (add) {
+ a += b;
+ } else {
+ a -= b;
+ }
+
+ rl = op->args[0];
+ rh = op->args[1];
+ tcg_opt_gen_movi(ctx, op, rl, (int32_t)a);
+ tcg_opt_gen_movi(ctx, op2, rh, (int32_t)(a >> 32));
+ return true;
+ }
+ return false;
+}
+
+static bool fold_add2_i32(OptContext *ctx, TCGOp *op)
+{
+ return fold_addsub2_i32(ctx, op, true);
+}
+
static bool fold_and(OptContext *ctx, TCGOp *op)
{
return fold_const2(ctx, op);
@@ -1043,6 +1076,11 @@ static bool fold_sub(OptContext *ctx, TCGOp *op)
return fold_const2(ctx, op);
}
+static bool fold_sub2_i32(OptContext *ctx, TCGOp *op)
+{
+ return fold_addsub2_i32(ctx, op, false);
+}
+
static bool fold_xor(OptContext *ctx, TCGOp *op)
{
return fold_const2(ctx, op);
@@ -1688,32 +1726,6 @@ void tcg_optimize(TCGContext *s)
}
break;
- case INDEX_op_add2_i32:
- case INDEX_op_sub2_i32:
- if (arg_is_const(op->args[2]) && arg_is_const(op->args[3])
- && arg_is_const(op->args[4]) && arg_is_const(op->args[5])) {
- uint32_t al = arg_info(op->args[2])->val;
- uint32_t ah = arg_info(op->args[3])->val;
- uint32_t bl = arg_info(op->args[4])->val;
- uint32_t bh = arg_info(op->args[5])->val;
- uint64_t a = ((uint64_t)ah << 32) | al;
- uint64_t b = ((uint64_t)bh << 32) | bl;
- TCGArg rl, rh;
- TCGOp *op2 = tcg_op_insert_before(s, op, INDEX_op_mov_i32);
-
- if (opc == INDEX_op_add2_i32) {
- a += b;
- } else {
- a -= b;
- }
-
- rl = op->args[0];
- rh = op->args[1];
- tcg_opt_gen_movi(&ctx, op, rl, (int32_t)a);
- tcg_opt_gen_movi(&ctx, op2, rh, (int32_t)(a >> 32));
- continue;
- }
- break;
default:
break;
@@ -1724,6 +1736,9 @@ void tcg_optimize(TCGContext *s)
CASE_OP_32_64_VEC(add):
done = fold_add(&ctx, op);
break;
+ case INDEX_op_add2_i32:
+ done = fold_add2_i32(&ctx, op);
+ break;
CASE_OP_32_64_VEC(and):
done = fold_and(&ctx, op);
break;
@@ -1818,6 +1833,9 @@ void tcg_optimize(TCGContext *s)
CASE_OP_32_64_VEC(sub):
done = fold_sub(&ctx, op);
break;
+ case INDEX_op_sub2_i32:
+ done = fold_sub2_i32(&ctx, op);
+ break;
CASE_OP_32_64_VEC(xor):
done = fold_xor(&ctx, op);
break;
--
2.25.1
next prev parent reply other threads:[~2021-08-30 6:48 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-30 6:24 [PATCH 00/48] tcg: optimize redundant sign extensions Richard Henderson
2021-08-30 6:24 ` [PATCH 01/48] tcg/optimize: Rename "mask" to "z_mask" Richard Henderson
2021-08-30 9:15 ` Philippe Mathieu-Daudé
2021-08-30 6:24 ` [PATCH 02/48] tcg/optimize: Split out OptContext Richard Henderson
2021-08-30 6:24 ` [PATCH 03/48] tcg/optimize: Remove do_default label Richard Henderson
2021-08-30 6:24 ` [PATCH 04/48] tcg/optimize: Change tcg_opt_gen_{mov,movi} interface Richard Henderson
2021-08-30 6:24 ` [PATCH 05/48] tcg/optimize: Move prev_mb into OptContext Richard Henderson
2021-08-30 6:24 ` [PATCH 06/48] tcg/optimize: Split out init_arguments Richard Henderson
2021-08-30 9:17 ` Philippe Mathieu-Daudé
2021-08-30 6:24 ` [PATCH 07/48] tcg/optimize: Split out copy_propagate Richard Henderson
2021-08-30 9:18 ` Philippe Mathieu-Daudé
2021-08-30 6:24 ` [PATCH 08/48] tcg/optimize: Split out fold_call Richard Henderson
2021-08-30 6:24 ` [PATCH 09/48] tcg/optimize: Drop nb_oargs, nb_iargs locals Richard Henderson
2021-08-30 6:24 ` [PATCH 10/48] tcg/optimize: Change fail return for do_constant_folding_cond* Richard Henderson
2021-08-30 6:24 ` [PATCH 11/48] tcg/optimize: Return true from tcg_opt_gen_{mov,movi} Richard Henderson
2021-08-30 9:20 ` Philippe Mathieu-Daudé
2021-08-30 6:24 ` [PATCH 12/48] tcg/optimize: Split out finish_folding Richard Henderson
2021-08-30 6:24 ` [PATCH 13/48] tcg/optimize: Use a boolean to avoid a mass of continues Richard Henderson
2021-08-30 9:23 ` Philippe Mathieu-Daudé
2021-08-30 6:24 ` [PATCH 14/48] tcg/optimize: Split out fold_mb, fold_qemu_{ld,st} Richard Henderson
2021-08-30 6:24 ` [PATCH 15/48] tcg/optimize: Split out fold_const{1,2} Richard Henderson
2021-08-30 6:24 ` [PATCH 16/48] tcg/optimize: Split out fold_setcond2 Richard Henderson
2021-08-30 6:24 ` [PATCH 17/48] tcg/optimize: Split out fold_brcond2 Richard Henderson
2021-08-30 6:24 ` [PATCH 18/48] tcg/optimize: Split out fold_brcond Richard Henderson
2021-08-30 6:24 ` [PATCH 19/48] tcg/optimize: Split out fold_setcond Richard Henderson
2021-08-30 6:24 ` [PATCH 20/48] tcg/optimize: Split out fold_mulu2_i32 Richard Henderson
2021-08-30 6:24 ` Richard Henderson [this message]
2021-08-30 6:24 ` [PATCH 22/48] tcg/optimize: Split out fold_movcond Richard Henderson
2021-08-30 6:24 ` [PATCH 23/48] tcg/optimize: Split out fold_extract2 Richard Henderson
2021-08-30 6:24 ` [PATCH 24/48] tcg/optimize: Split out fold_extract, fold_sextract Richard Henderson
2021-08-30 6:24 ` [PATCH 25/48] tcg/optimize: Split out fold_deposit Richard Henderson
2021-08-30 6:24 ` [PATCH 26/48] tcg/optimize: Split out fold_count_zeros Richard Henderson
2021-08-30 6:24 ` [PATCH 27/48] tcg/optimize: Split out fold_bswap Richard Henderson
2021-08-30 21:17 ` Philippe Mathieu-Daudé
2021-08-30 6:24 ` [PATCH 28/48] tcg/optimize: Split out fold_dup, fold_dup2 Richard Henderson
2021-08-30 6:24 ` [PATCH 29/48] tcg/optimize: Split out fold_mov Richard Henderson
2021-08-30 21:57 ` Philippe Mathieu-Daudé
2021-08-30 6:24 ` [PATCH 30/48] tcg/optimize: Split out fold_xx_to_i Richard Henderson
2021-08-30 21:56 ` Philippe Mathieu-Daudé
2021-08-30 6:24 ` [PATCH 31/48] tcg/optimize: Split out fold_xx_to_x Richard Henderson
2021-08-30 21:55 ` Philippe Mathieu-Daudé
2021-08-30 6:24 ` [PATCH 32/48] tcg/optimize: Split out fold_xi_to_i Richard Henderson
2021-08-30 21:53 ` Philippe Mathieu-Daudé
2021-08-30 6:24 ` [PATCH 33/48] tcg/optimize: Add type to OptContext Richard Henderson
2021-08-30 6:24 ` [PATCH 34/48] tcg/optimize: Split out fold_to_not Richard Henderson
2021-08-30 6:24 ` [PATCH 35/48] tcg/optimize: Split out fold_sub_to_neg Richard Henderson
2021-08-30 6:24 ` [PATCH 36/48] tcg/optimize: Split out fold_xi_to_x Richard Henderson
2021-08-30 6:24 ` [PATCH 37/48] tcg/optimize: Split out fold_ix_to_i Richard Henderson
2021-08-30 6:24 ` [PATCH 38/48] tcg/optimize: Split out fold_masks Richard Henderson
2021-08-30 6:24 ` [PATCH 39/48] tcg/optimize: Expand fold_mulu2_i32 to all 4-arg multiplies Richard Henderson
2021-08-30 6:24 ` [PATCH 40/48] tcg/optimize: Expand fold_addsub2_i32 to 64-bit ops Richard Henderson
2021-08-30 21:47 ` Philippe Mathieu-Daudé
2021-08-30 6:24 ` [PATCH 41/48] tcg/optimize: Sink commutative operand swapping into fold functions Richard Henderson
2021-08-30 6:24 ` [PATCH 42/48] tcg/optimize: Add more simplifications for orc Richard Henderson
2021-08-30 6:24 ` [PATCH 43/48] tcg/optimize: Stop forcing z_mask to "garbage" for 32-bit values Richard Henderson
2021-08-30 6:24 ` [PATCH 44/48] tcg/optimize: Optimize sign extensions Richard Henderson
2021-08-30 6:24 ` [PATCH 45/48] tcg/optimize: Propagate sign info for logical operations Richard Henderson
2021-08-30 21:49 ` Philippe Mathieu-Daudé
2021-08-30 6:24 ` [PATCH 46/48] tcg/optimize: Propagate sign info for setcond Richard Henderson
2021-08-30 6:24 ` [PATCH 47/48] tcg/optimize: Propagate sign info for bit counting Richard Henderson
2021-08-30 6:24 ` [PATCH 48/48] tcg/optimize: Propagate sign info for shifting Richard Henderson
2021-08-30 22:00 ` [PATCH 00/48] tcg: optimize redundant sign extensions Philippe Mathieu-Daudé
2021-08-31 3:50 ` Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210830062451.639572-22-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).