From: "Cédric Le Goater" <clg@kaod.org>
To: Peter Maydell <peter.maydell@linaro.org>
Cc: "Andrew Jeffery" <andrew@aj.id.au>,
"Cédric Le Goater" <clg@kaod.org>,
qemu-arm@nongnu.org, "Joel Stanley" <joel@jms.id.au>,
qemu-devel@nongnu.org
Subject: [PULL 11/14] arm/aspeed: Add DPS310 to Witherspoon and Rainier
Date: Fri, 3 Sep 2021 21:41:05 +0200 [thread overview]
Message-ID: <20210903194108.131403-12-clg@kaod.org> (raw)
In-Reply-To: <20210903194108.131403-1-clg@kaod.org>
From: Joel Stanley <joel@jms.id.au>
Witherspoon uses the DPS310 as a temperature sensor. Rainier uses it as
a temperature and humidity sensor.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210629142336.750058-5-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
hw/arm/aspeed.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 97964c7e0c53..886e5992cdf3 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -602,7 +602,6 @@ static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc)
/* Bus 3: TODO bmp280@77 */
/* Bus 3: TODO max31785@52 */
- /* Bus 3: TODO dps310@76 */
dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60));
qdev_prop_set_string(dev, "description", "pca1");
i2c_slave_realize_and_unref(I2C_SLAVE(dev),
@@ -617,6 +616,7 @@ static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc)
qdev_connect_gpio_out(dev, pca1_leds[i].gpio_id,
qdev_get_gpio_in(DEVICE(led), 0));
}
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3), "dps310", 0x76);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "tmp423", 0x4c);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), "tmp423", 0x4c);
@@ -725,9 +725,9 @@ static void rainier_bmc_i2c_init(AspeedMachineState *bmc)
aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 2), 0x50, 64 * KiB);
aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 3), 0x51, 64 * KiB);
- /* Bus 7: TODO dps310@76 */
/* Bus 7: TODO max31785@52 */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x61);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "dps310", 0x76);
/* Bus 7: TODO si7021-a20@20 */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), TYPE_TMP105,
0x48);
--
2.31.1
next prev parent reply other threads:[~2021-09-03 19:55 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-03 19:40 [PULL 00/14] aspeed queue Cédric Le Goater
2021-09-03 19:40 ` [PULL 01/14] hw: arm: aspeed: Enable eth0 interface for aspeed-ast2600-evb Cédric Le Goater
2021-09-03 19:40 ` [PULL 02/14] hw: arm: aspeed: Enable mac0/1 instead of mac1/2 for g220a Cédric Le Goater
2021-09-03 19:40 ` [PULL 03/14] watchdog: aspeed: Sanitize control register values Cédric Le Goater
2021-09-03 19:40 ` [PULL 04/14] watchdog: aspeed: Fix sequential control writes Cédric Le Goater
2021-09-03 19:40 ` [PULL 05/14] hw: aspeed_gpio: Simplify 1.8V defines Cédric Le Goater
2021-09-03 19:41 ` [PULL 06/14] hw: aspeed_gpio: Clarify GPIO controller name Cédric Le Goater
2021-09-03 19:41 ` [PULL 07/14] misc/pca9552: Fix LED status register indexing in pca955x_get_led() Cédric Le Goater
2021-09-03 19:41 ` [PULL 08/14] arm/aspeed: rainier: Add i2c eeproms and muxes Cédric Le Goater
2021-09-03 19:41 ` [PULL 09/14] aspeed: Emulate the AST2600A3 Cédric Le Goater
2021-09-03 19:41 ` [PULL 10/14] hw/misc: Add Infineon DPS310 sensor model Cédric Le Goater
2021-09-03 19:41 ` Cédric Le Goater [this message]
2021-09-03 19:41 ` [PULL 12/14] hw/arm/aspeed: Initialize AST2600 UART clock selection registers Cédric Le Goater
2021-09-03 19:41 ` [PULL 13/14] hw/arm/aspeed: Allow machine to set UART default Cédric Le Goater
2021-09-03 19:41 ` [PULL 14/14] hw/arm/aspeed: Add Fuji machine type Cédric Le Goater
2021-09-03 20:39 ` Philippe Mathieu-Daudé
2021-09-03 20:41 ` [PULL 00/14] aspeed queue Philippe Mathieu-Daudé
2021-09-04 5:33 ` Cédric Le Goater
2021-09-04 23:03 ` Philippe Mathieu-Daudé
2021-09-05 8:51 ` Cédric Le Goater
2021-09-05 14:34 ` Peter Delevoryas
2021-09-05 14:43 ` Cédric Le Goater
-- strict thread matches above, loose matches on Subject: below --
2021-09-13 16:12 Cédric Le Goater
2021-09-13 16:13 ` [PULL 11/14] arm/aspeed: Add DPS310 to Witherspoon and Rainier Cédric Le Goater
2021-09-20 8:09 [PULL 00/14] aspeed queue Cédric Le Goater
2021-09-20 8:09 ` [PULL 11/14] arm/aspeed: Add DPS310 to Witherspoon and Rainier Cédric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210903194108.131403-12-clg@kaod.org \
--to=clg@kaod.org \
--cc=andrew@aj.id.au \
--cc=joel@jms.id.au \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).