From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Yang Zhong <yang.zhong@intel.com>,
Sean Christopherson <sean.j.christopherson@intel.com>
Subject: [PULL 17/36] i386: Add SGX CPUID leaf FEAT_SGX_12_1_EAX
Date: Mon, 6 Sep 2021 15:10:40 +0200 [thread overview]
Message-ID: <20210906131059.55234-18-pbonzini@redhat.com> (raw)
In-Reply-To: <20210906131059.55234-1-pbonzini@redhat.com>
From: Sean Christopherson <sean.j.christopherson@intel.com>
CPUID leaf 12_1_EAX is an Intel-defined feature bits leaf enumerating
the platform's SGX capabilities that may be utilized by an enclave, e.g.
whether or not an enclave can gain access to the provision key.
Currently there are six capabilities:
- INIT: set when the enclave has has been initialized by EINIT. Cannot
be set by software, i.e. forced to zero in CPUID.
- DEBUG: permits a debugger to read/write into the enclave.
- MODE64BIT: the enclave runs in 64-bit mode
- PROVISIONKEY: grants has access to the provision key
- EINITTOKENKEY: grants access to the EINIT token key, i.e. the
enclave can generate EINIT tokens
- KSS: Key Separation and Sharing enabled for the enclave.
Note that the entirety of CPUID.0x12.0x1, i.e. all registers, enumerates
the allowed ATTRIBUTES (128 bits), but only bits 31:0 are directly
exposed to the user (via FEAT_12_1_EAX). Bits 63:32 are currently all
reserved and bits 127:64 correspond to the allowed XSAVE Feature Request
Mask, which is calculated based on other CPU features, e.g. XSAVE, MPX,
AVX, etc... and is not exposed to the user.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-10-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
target/i386/cpu.c | 21 +++++++++++++++++++++
target/i386/cpu.h | 1 +
2 files changed, 22 insertions(+)
diff --git a/target/i386/cpu.c b/target/i386/cpu.c
index c0d5c3c621..e9ecbf59e5 100644
--- a/target/i386/cpu.c
+++ b/target/i386/cpu.c
@@ -656,6 +656,7 @@ void x86_cpu_vendor_words2str(char *dst, uint32_t vendor1,
#define TCG_14_0_ECX_FEATURES 0
#define TCG_SGX_12_0_EAX_FEATURES 0
#define TCG_SGX_12_0_EBX_FEATURES 0
+#define TCG_SGX_12_1_EAX_FEATURES 0
FeatureWordInfo feature_word_info[FEATURE_WORDS] = {
[FEAT_1_EDX] = {
@@ -1223,6 +1224,26 @@ FeatureWordInfo feature_word_info[FEATURE_WORDS] = {
},
.tcg_features = TCG_SGX_12_0_EBX_FEATURES,
},
+
+ [FEAT_SGX_12_1_EAX] = {
+ .type = CPUID_FEATURE_WORD,
+ .feat_names = {
+ NULL, "sgx-debug", "sgx-mode64", NULL,
+ "sgx-provisionkey", "sgx-tokenkey", NULL, "sgx-kss",
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL,
+ },
+ .cpuid = {
+ .eax = 0x12,
+ .needs_ecx = true, .ecx = 1,
+ .reg = R_EAX,
+ },
+ .tcg_features = TCG_SGX_12_1_EAX_FEATURES,
+ },
};
typedef struct FeatureMask {
diff --git a/target/i386/cpu.h b/target/i386/cpu.h
index bc4b7cd727..04c9e0c259 100644
--- a/target/i386/cpu.h
+++ b/target/i386/cpu.h
@@ -579,6 +579,7 @@ typedef enum FeatureWord {
FEAT_14_0_ECX,
FEAT_SGX_12_0_EAX, /* CPUID[EAX=0x12,ECX=0].EAX (SGX) */
FEAT_SGX_12_0_EBX, /* CPUID[EAX=0x12,ECX=0].EBX (SGX MISCSELECT[31:0]) */
+ FEAT_SGX_12_1_EAX, /* CPUID[EAX=0x12,ECX=1].EAX (SGX ATTRIBUTES[31:0]) */
FEATURE_WORDS,
} FeatureWord;
--
2.31.1
next prev parent reply other threads:[~2021-09-06 13:22 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-06 13:10 [PULL 00/36] (Mostly) x86 changes for 2021-09-06 Paolo Bonzini
2021-09-06 13:10 ` [PULL 01/36] target/i386: VMRUN and VMLOAD canonicalizations Paolo Bonzini
2021-09-06 13:10 ` [PULL 02/36] target/i386: Added VGIF feature Paolo Bonzini
2021-09-06 13:10 ` [PULL 03/36] target/i386: Moved int_ctl into CPUX86State structure Paolo Bonzini
2021-09-06 13:10 ` [PULL 04/36] target/i386: Added VGIF V_IRQ masking capability Paolo Bonzini
2021-09-06 13:10 ` [PULL 05/36] target/i386: Added ignore TPR check in ctl_has_irq Paolo Bonzini
2021-09-06 13:10 ` [PULL 06/36] target/i386: Added changed priority check for VIRQ Paolo Bonzini
2021-09-06 13:10 ` [PULL 07/36] target/i386: Added vVMLOAD and vVMSAVE feature Paolo Bonzini
2021-09-06 13:10 ` [PULL 08/36] configure / meson: Move the GBM handling to meson.build Paolo Bonzini
2021-09-06 13:26 ` Thomas Huth
2021-09-06 13:10 ` [PULL 09/36] memory: Add RAM_PROTECTED flag to skip IOMMU mappings Paolo Bonzini
2021-09-06 13:10 ` [PULL 10/36] hostmem: Add hostmem-epc as a backend for SGX EPC Paolo Bonzini
2021-09-07 6:23 ` Yang Zhong
2021-09-06 13:10 ` [PULL 11/36] qom: Add memory-backend-epc ObjectOptions support Paolo Bonzini
2021-09-06 13:10 ` [PULL 12/36] i386: Add 'sgx-epc' device to expose EPC sections to guest Paolo Bonzini
2021-09-06 13:10 ` [PULL 13/36] vl: Add sgx compound properties to expose SGX " Paolo Bonzini
2021-09-06 13:10 ` [PULL 14/36] i386: Add primary SGX CPUID and MSR defines Paolo Bonzini
2021-09-06 13:10 ` [PULL 15/36] i386: Add SGX CPUID leaf FEAT_SGX_12_0_EAX Paolo Bonzini
2021-09-06 13:10 ` [PULL 16/36] i386: Add SGX CPUID leaf FEAT_SGX_12_0_EBX Paolo Bonzini
2021-09-06 13:10 ` Paolo Bonzini [this message]
2021-09-06 13:10 ` [PULL 18/36] i386: Add get/set/migrate support for SGX_LEPUBKEYHASH MSRs Paolo Bonzini
2021-09-06 13:10 ` [PULL 19/36] i386: Add feature control MSR dependency when SGX is enabled Paolo Bonzini
2021-09-06 13:10 ` [PULL 20/36] i386: Update SGX CPUID info according to hardware/KVM/user input Paolo Bonzini
2021-09-06 13:10 ` [PULL 21/36] i386: kvm: Add support for exposing PROVISIONKEY to guest Paolo Bonzini
2021-09-06 13:10 ` [PULL 22/36] i386: Propagate SGX CPUID sub-leafs to KVM Paolo Bonzini
2021-09-06 13:10 ` [PULL 23/36] Adjust min CPUID level to 0x12 when SGX is enabled Paolo Bonzini
2021-09-06 13:10 ` [PULL 24/36] hw/i386/fw_cfg: Set SGX bits in feature control fw_cfg accordingly Paolo Bonzini
2021-09-06 13:10 ` [PULL 25/36] hw/i386/pc: Account for SGX EPC sections when calculating device memory Paolo Bonzini
2021-09-06 13:10 ` [PULL 26/36] i386/pc: Add e820 entry for SGX EPC section(s) Paolo Bonzini
2021-09-06 13:10 ` [PULL 27/36] i386: acpi: Add SGX EPC entry to ACPI tables Paolo Bonzini
2021-09-06 13:10 ` [PULL 28/36] q35: Add support for SGX EPC Paolo Bonzini
2021-09-06 13:10 ` [PULL 29/36] i440fx: " Paolo Bonzini
2021-09-06 13:10 ` [PULL 30/36] hostmem-epc: Add the reset interface for EPC backend reset Paolo Bonzini
2021-09-06 13:10 ` [PULL 31/36] sgx-epc: Add the reset interface for sgx-epc virt device Paolo Bonzini
2021-09-06 13:10 ` [PULL 32/36] sgx-epc: Avoid bios reset during sgx epc initialization Paolo Bonzini
2021-09-06 13:10 ` [PULL 33/36] hostmem-epc: Make prealloc consistent with qemu cmdline during reset Paolo Bonzini
2021-09-06 13:10 ` [PULL 34/36] Kconfig: Add CONFIG_SGX support Paolo Bonzini
2021-09-06 13:10 ` [PULL 35/36] sgx-epc: Add the fill_device_info() callback support Paolo Bonzini
2021-09-06 13:10 ` [PULL 36/36] doc: Add the SGX doc Paolo Bonzini
2021-09-06 14:03 ` [PULL 00/36] (Mostly) x86 changes for 2021-09-06 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210906131059.55234-18-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=sean.j.christopherson@intel.com \
--cc=yang.zhong@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).