From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Lara Lazier <laramglazier@gmail.com>
Subject: [PULL 04/36] target/i386: Added VGIF V_IRQ masking capability
Date: Mon, 6 Sep 2021 15:10:27 +0200 [thread overview]
Message-ID: <20210906131059.55234-5-pbonzini@redhat.com> (raw)
In-Reply-To: <20210906131059.55234-1-pbonzini@redhat.com>
From: Lara Lazier <laramglazier@gmail.com>
VGIF provides masking capability for when virtual interrupts
are taken. (APM2)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
target/i386/cpu.c | 7 +++++--
target/i386/cpu.h | 2 ++
target/i386/tcg/sysemu/svm_helper.c | 12 ++++++++++++
3 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/target/i386/cpu.c b/target/i386/cpu.c
index ddc3b63cb8..6b029f1bdf 100644
--- a/target/i386/cpu.c
+++ b/target/i386/cpu.c
@@ -5657,6 +5657,7 @@ static void x86_cpu_reset(DeviceState *dev)
/* init to reset state */
env->int_ctl = 0;
env->hflags2 |= HF2_GIF_MASK;
+ env->hflags2 |= HF2_VGIF_MASK;
env->hflags &= ~HF_GUEST_MASK;
cpu_x86_update_cr0(env, 0x60000010);
@@ -6540,10 +6541,12 @@ int x86_cpu_pending_interrupt(CPUState *cs, int interrupt_request)
!(env->hflags & HF_INHIBIT_IRQ_MASK))))) {
return CPU_INTERRUPT_HARD;
#if !defined(CONFIG_USER_ONLY)
- } else if ((interrupt_request & CPU_INTERRUPT_VIRQ) &&
+ } else if (env->hflags2 & HF2_VGIF_MASK) {
+ if((interrupt_request & CPU_INTERRUPT_VIRQ) &&
(env->eflags & IF_MASK) &&
!(env->hflags & HF_INHIBIT_IRQ_MASK)) {
- return CPU_INTERRUPT_VIRQ;
+ return CPU_INTERRUPT_VIRQ;
+ }
#endif
}
}
diff --git a/target/i386/cpu.h b/target/i386/cpu.h
index e27a1aab99..d26df6de6b 100644
--- a/target/i386/cpu.h
+++ b/target/i386/cpu.h
@@ -203,6 +203,7 @@ typedef enum X86Seg {
#define HF2_MPX_PR_SHIFT 5 /* BNDCFGx.BNDPRESERVE */
#define HF2_NPT_SHIFT 6 /* Nested Paging enabled */
#define HF2_IGNNE_SHIFT 7 /* Ignore CR0.NE=0 */
+#define HF2_VGIF_SHIFT 8 /* Can take VIRQ*/
#define HF2_GIF_MASK (1 << HF2_GIF_SHIFT)
#define HF2_HIF_MASK (1 << HF2_HIF_SHIFT)
@@ -212,6 +213,7 @@ typedef enum X86Seg {
#define HF2_MPX_PR_MASK (1 << HF2_MPX_PR_SHIFT)
#define HF2_NPT_MASK (1 << HF2_NPT_SHIFT)
#define HF2_IGNNE_MASK (1 << HF2_IGNNE_SHIFT)
+#define HF2_VGIF_MASK (1 << HF2_VGIF_SHIFT)
#define CR0_PE_SHIFT 0
#define CR0_MP_SHIFT 1
diff --git a/target/i386/tcg/sysemu/svm_helper.c b/target/i386/tcg/sysemu/svm_helper.c
index 24c58b6a38..4612dae1ac 100644
--- a/target/i386/tcg/sysemu/svm_helper.c
+++ b/target/i386/tcg/sysemu/svm_helper.c
@@ -130,6 +130,11 @@ static inline bool virtual_gif_enabled(CPUX86State *env)
return false;
}
+static inline bool virtual_gif_set(CPUX86State *env)
+{
+ return !virtual_gif_enabled(env) || (env->int_ctl & V_GIF_MASK);
+}
+
void helper_vmrun(CPUX86State *env, int aflag, int next_eip_addend)
{
CPUState *cs = env_cpu(env);
@@ -364,6 +369,10 @@ void helper_vmrun(CPUX86State *env, int aflag, int next_eip_addend)
cs->interrupt_request |= CPU_INTERRUPT_VIRQ;
}
+ if (virtual_gif_set(env)) {
+ env->hflags2 |= HF2_VGIF_MASK;
+ }
+
/* maybe we need to inject an event */
event_inj = x86_ldl_phys(cs, env->vm_vmcb + offsetof(struct vmcb,
control.event_inj));
@@ -520,6 +529,7 @@ void helper_stgi(CPUX86State *env)
if (virtual_gif_enabled(env)) {
env->int_ctl |= V_GIF_MASK;
+ env->hflags2 |= HF2_VGIF_MASK;
} else {
env->hflags2 |= HF2_GIF_MASK;
}
@@ -531,6 +541,7 @@ void helper_clgi(CPUX86State *env)
if (virtual_gif_enabled(env)) {
env->int_ctl &= ~V_GIF_MASK;
+ env->hflags2 &= ~HF2_VGIF_MASK;
} else {
env->hflags2 &= ~HF2_GIF_MASK;
}
@@ -812,6 +823,7 @@ void do_vmexit(CPUX86State *env)
env->vm_vmcb + offsetof(struct vmcb, control.event_inj), 0);
env->hflags2 &= ~HF2_GIF_MASK;
+ env->hflags2 &= ~HF2_VGIF_MASK;
/* FIXME: Resets the current ASID register to zero (host ASID). */
/* Clears the V_IRQ and V_INTR_MASKING bits inside the processor. */
--
2.31.1
next prev parent reply other threads:[~2021-09-06 13:15 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-06 13:10 [PULL 00/36] (Mostly) x86 changes for 2021-09-06 Paolo Bonzini
2021-09-06 13:10 ` [PULL 01/36] target/i386: VMRUN and VMLOAD canonicalizations Paolo Bonzini
2021-09-06 13:10 ` [PULL 02/36] target/i386: Added VGIF feature Paolo Bonzini
2021-09-06 13:10 ` [PULL 03/36] target/i386: Moved int_ctl into CPUX86State structure Paolo Bonzini
2021-09-06 13:10 ` Paolo Bonzini [this message]
2021-09-06 13:10 ` [PULL 05/36] target/i386: Added ignore TPR check in ctl_has_irq Paolo Bonzini
2021-09-06 13:10 ` [PULL 06/36] target/i386: Added changed priority check for VIRQ Paolo Bonzini
2021-09-06 13:10 ` [PULL 07/36] target/i386: Added vVMLOAD and vVMSAVE feature Paolo Bonzini
2021-09-06 13:10 ` [PULL 08/36] configure / meson: Move the GBM handling to meson.build Paolo Bonzini
2021-09-06 13:26 ` Thomas Huth
2021-09-06 13:10 ` [PULL 09/36] memory: Add RAM_PROTECTED flag to skip IOMMU mappings Paolo Bonzini
2021-09-06 13:10 ` [PULL 10/36] hostmem: Add hostmem-epc as a backend for SGX EPC Paolo Bonzini
2021-09-07 6:23 ` Yang Zhong
2021-09-06 13:10 ` [PULL 11/36] qom: Add memory-backend-epc ObjectOptions support Paolo Bonzini
2021-09-06 13:10 ` [PULL 12/36] i386: Add 'sgx-epc' device to expose EPC sections to guest Paolo Bonzini
2021-09-06 13:10 ` [PULL 13/36] vl: Add sgx compound properties to expose SGX " Paolo Bonzini
2021-09-06 13:10 ` [PULL 14/36] i386: Add primary SGX CPUID and MSR defines Paolo Bonzini
2021-09-06 13:10 ` [PULL 15/36] i386: Add SGX CPUID leaf FEAT_SGX_12_0_EAX Paolo Bonzini
2021-09-06 13:10 ` [PULL 16/36] i386: Add SGX CPUID leaf FEAT_SGX_12_0_EBX Paolo Bonzini
2021-09-06 13:10 ` [PULL 17/36] i386: Add SGX CPUID leaf FEAT_SGX_12_1_EAX Paolo Bonzini
2021-09-06 13:10 ` [PULL 18/36] i386: Add get/set/migrate support for SGX_LEPUBKEYHASH MSRs Paolo Bonzini
2021-09-06 13:10 ` [PULL 19/36] i386: Add feature control MSR dependency when SGX is enabled Paolo Bonzini
2021-09-06 13:10 ` [PULL 20/36] i386: Update SGX CPUID info according to hardware/KVM/user input Paolo Bonzini
2021-09-06 13:10 ` [PULL 21/36] i386: kvm: Add support for exposing PROVISIONKEY to guest Paolo Bonzini
2021-09-06 13:10 ` [PULL 22/36] i386: Propagate SGX CPUID sub-leafs to KVM Paolo Bonzini
2021-09-06 13:10 ` [PULL 23/36] Adjust min CPUID level to 0x12 when SGX is enabled Paolo Bonzini
2021-09-06 13:10 ` [PULL 24/36] hw/i386/fw_cfg: Set SGX bits in feature control fw_cfg accordingly Paolo Bonzini
2021-09-06 13:10 ` [PULL 25/36] hw/i386/pc: Account for SGX EPC sections when calculating device memory Paolo Bonzini
2021-09-06 13:10 ` [PULL 26/36] i386/pc: Add e820 entry for SGX EPC section(s) Paolo Bonzini
2021-09-06 13:10 ` [PULL 27/36] i386: acpi: Add SGX EPC entry to ACPI tables Paolo Bonzini
2021-09-06 13:10 ` [PULL 28/36] q35: Add support for SGX EPC Paolo Bonzini
2021-09-06 13:10 ` [PULL 29/36] i440fx: " Paolo Bonzini
2021-09-06 13:10 ` [PULL 30/36] hostmem-epc: Add the reset interface for EPC backend reset Paolo Bonzini
2021-09-06 13:10 ` [PULL 31/36] sgx-epc: Add the reset interface for sgx-epc virt device Paolo Bonzini
2021-09-06 13:10 ` [PULL 32/36] sgx-epc: Avoid bios reset during sgx epc initialization Paolo Bonzini
2021-09-06 13:10 ` [PULL 33/36] hostmem-epc: Make prealloc consistent with qemu cmdline during reset Paolo Bonzini
2021-09-06 13:10 ` [PULL 34/36] Kconfig: Add CONFIG_SGX support Paolo Bonzini
2021-09-06 13:10 ` [PULL 35/36] sgx-epc: Add the fill_device_info() callback support Paolo Bonzini
2021-09-06 13:10 ` [PULL 36/36] doc: Add the SGX doc Paolo Bonzini
2021-09-06 14:03 ` [PULL 00/36] (Mostly) x86 changes for 2021-09-06 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210906131059.55234-5-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=laramglazier@gmail.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).