From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Lara Lazier <laramglazier@gmail.com>
Subject: [PULL 06/36] target/i386: Added changed priority check for VIRQ
Date: Mon, 6 Sep 2021 15:10:29 +0200 [thread overview]
Message-ID: <20210906131059.55234-7-pbonzini@redhat.com> (raw)
In-Reply-To: <20210906131059.55234-1-pbonzini@redhat.com>
From: Lara Lazier <laramglazier@gmail.com>
Writes to cr8 affect v_tpr. This could set or unset an interrupt
request as the priority might have changed.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
target/i386/cpu.h | 15 +++++++++++++++
target/i386/tcg/sysemu/misc_helper.c | 7 +++++++
target/i386/tcg/sysemu/svm_helper.c | 15 ---------------
3 files changed, 22 insertions(+), 15 deletions(-)
diff --git a/target/i386/cpu.h b/target/i386/cpu.h
index d26df6de6b..69e722253d 100644
--- a/target/i386/cpu.h
+++ b/target/i386/cpu.h
@@ -2245,6 +2245,21 @@ static inline uint64_t cr4_reserved_bits(CPUX86State *env)
return reserved_bits;
}
+static inline bool ctl_has_irq(CPUX86State *env)
+{
+ uint32_t int_prio;
+ uint32_t tpr;
+
+ int_prio = (env->int_ctl & V_INTR_PRIO_MASK) >> V_INTR_PRIO_SHIFT;
+ tpr = env->int_ctl & V_TPR_MASK;
+
+ if (env->int_ctl & V_IGN_TPR_MASK) {
+ return (env->int_ctl & V_IRQ_MASK);
+ }
+
+ return (env->int_ctl & V_IRQ_MASK) && (int_prio >= tpr);
+}
+
#if defined(TARGET_X86_64) && \
defined(CONFIG_USER_ONLY) && \
defined(CONFIG_LINUX)
diff --git a/target/i386/tcg/sysemu/misc_helper.c b/target/i386/tcg/sysemu/misc_helper.c
index 91b0fc916b..9ccaa054c4 100644
--- a/target/i386/tcg/sysemu/misc_helper.c
+++ b/target/i386/tcg/sysemu/misc_helper.c
@@ -122,6 +122,13 @@ void helper_write_crN(CPUX86State *env, int reg, target_ulong t0)
qemu_mutex_unlock_iothread();
}
env->int_ctl = (env->int_ctl & ~V_TPR_MASK) | (t0 & V_TPR_MASK);
+
+ CPUState *cs = env_cpu(env);
+ if (ctl_has_irq(env)) {
+ cpu_interrupt(cs, CPU_INTERRUPT_VIRQ);
+ } else {
+ cpu_reset_interrupt(cs, CPU_INTERRUPT_VIRQ);
+ }
break;
default:
env->cr[reg] = t0;
diff --git a/target/i386/tcg/sysemu/svm_helper.c b/target/i386/tcg/sysemu/svm_helper.c
index a35b79548a..7bbd3a18c9 100644
--- a/target/i386/tcg/sysemu/svm_helper.c
+++ b/target/i386/tcg/sysemu/svm_helper.c
@@ -76,21 +76,6 @@ static inline void svm_load_seg_cache(CPUX86State *env, hwaddr addr,
sc->base, sc->limit, sc->flags);
}
-static inline bool ctl_has_irq(CPUX86State *env)
-{
- uint32_t int_prio;
- uint32_t tpr;
-
- int_prio = (env->int_ctl & V_INTR_PRIO_MASK) >> V_INTR_PRIO_SHIFT;
- tpr = env->int_ctl & V_TPR_MASK;
-
- if (env->int_ctl & V_IGN_TPR_MASK) {
- return env->int_ctl & V_IRQ_MASK;
- }
-
- return (env->int_ctl & V_IRQ_MASK) && (int_prio >= tpr);
-}
-
static inline bool is_efer_invalid_state (CPUX86State *env)
{
if (!(env->efer & MSR_EFER_SVME)) {
--
2.31.1
next prev parent reply other threads:[~2021-09-06 13:19 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-06 13:10 [PULL 00/36] (Mostly) x86 changes for 2021-09-06 Paolo Bonzini
2021-09-06 13:10 ` [PULL 01/36] target/i386: VMRUN and VMLOAD canonicalizations Paolo Bonzini
2021-09-06 13:10 ` [PULL 02/36] target/i386: Added VGIF feature Paolo Bonzini
2021-09-06 13:10 ` [PULL 03/36] target/i386: Moved int_ctl into CPUX86State structure Paolo Bonzini
2021-09-06 13:10 ` [PULL 04/36] target/i386: Added VGIF V_IRQ masking capability Paolo Bonzini
2021-09-06 13:10 ` [PULL 05/36] target/i386: Added ignore TPR check in ctl_has_irq Paolo Bonzini
2021-09-06 13:10 ` Paolo Bonzini [this message]
2021-09-06 13:10 ` [PULL 07/36] target/i386: Added vVMLOAD and vVMSAVE feature Paolo Bonzini
2021-09-06 13:10 ` [PULL 08/36] configure / meson: Move the GBM handling to meson.build Paolo Bonzini
2021-09-06 13:26 ` Thomas Huth
2021-09-06 13:10 ` [PULL 09/36] memory: Add RAM_PROTECTED flag to skip IOMMU mappings Paolo Bonzini
2021-09-06 13:10 ` [PULL 10/36] hostmem: Add hostmem-epc as a backend for SGX EPC Paolo Bonzini
2021-09-07 6:23 ` Yang Zhong
2021-09-06 13:10 ` [PULL 11/36] qom: Add memory-backend-epc ObjectOptions support Paolo Bonzini
2021-09-06 13:10 ` [PULL 12/36] i386: Add 'sgx-epc' device to expose EPC sections to guest Paolo Bonzini
2021-09-06 13:10 ` [PULL 13/36] vl: Add sgx compound properties to expose SGX " Paolo Bonzini
2021-09-06 13:10 ` [PULL 14/36] i386: Add primary SGX CPUID and MSR defines Paolo Bonzini
2021-09-06 13:10 ` [PULL 15/36] i386: Add SGX CPUID leaf FEAT_SGX_12_0_EAX Paolo Bonzini
2021-09-06 13:10 ` [PULL 16/36] i386: Add SGX CPUID leaf FEAT_SGX_12_0_EBX Paolo Bonzini
2021-09-06 13:10 ` [PULL 17/36] i386: Add SGX CPUID leaf FEAT_SGX_12_1_EAX Paolo Bonzini
2021-09-06 13:10 ` [PULL 18/36] i386: Add get/set/migrate support for SGX_LEPUBKEYHASH MSRs Paolo Bonzini
2021-09-06 13:10 ` [PULL 19/36] i386: Add feature control MSR dependency when SGX is enabled Paolo Bonzini
2021-09-06 13:10 ` [PULL 20/36] i386: Update SGX CPUID info according to hardware/KVM/user input Paolo Bonzini
2021-09-06 13:10 ` [PULL 21/36] i386: kvm: Add support for exposing PROVISIONKEY to guest Paolo Bonzini
2021-09-06 13:10 ` [PULL 22/36] i386: Propagate SGX CPUID sub-leafs to KVM Paolo Bonzini
2021-09-06 13:10 ` [PULL 23/36] Adjust min CPUID level to 0x12 when SGX is enabled Paolo Bonzini
2021-09-06 13:10 ` [PULL 24/36] hw/i386/fw_cfg: Set SGX bits in feature control fw_cfg accordingly Paolo Bonzini
2021-09-06 13:10 ` [PULL 25/36] hw/i386/pc: Account for SGX EPC sections when calculating device memory Paolo Bonzini
2021-09-06 13:10 ` [PULL 26/36] i386/pc: Add e820 entry for SGX EPC section(s) Paolo Bonzini
2021-09-06 13:10 ` [PULL 27/36] i386: acpi: Add SGX EPC entry to ACPI tables Paolo Bonzini
2021-09-06 13:10 ` [PULL 28/36] q35: Add support for SGX EPC Paolo Bonzini
2021-09-06 13:10 ` [PULL 29/36] i440fx: " Paolo Bonzini
2021-09-06 13:10 ` [PULL 30/36] hostmem-epc: Add the reset interface for EPC backend reset Paolo Bonzini
2021-09-06 13:10 ` [PULL 31/36] sgx-epc: Add the reset interface for sgx-epc virt device Paolo Bonzini
2021-09-06 13:10 ` [PULL 32/36] sgx-epc: Avoid bios reset during sgx epc initialization Paolo Bonzini
2021-09-06 13:10 ` [PULL 33/36] hostmem-epc: Make prealloc consistent with qemu cmdline during reset Paolo Bonzini
2021-09-06 13:10 ` [PULL 34/36] Kconfig: Add CONFIG_SGX support Paolo Bonzini
2021-09-06 13:10 ` [PULL 35/36] sgx-epc: Add the fill_device_info() callback support Paolo Bonzini
2021-09-06 13:10 ` [PULL 36/36] doc: Add the SGX doc Paolo Bonzini
2021-09-06 14:03 ` [PULL 00/36] (Mostly) x86 changes for 2021-09-06 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210906131059.55234-7-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=laramglazier@gmail.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).