qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Cédric Le Goater" <clg@kaod.org>
To: Peter Maydell <peter.maydell@linaro.org>
Cc: "Andrew Jeffery" <andrew@aj.id.au>,
	"Cédric Le Goater" <clg@kaod.org>,
	qemu-arm@nongnu.org, "Joel Stanley" <joel@jms.id.au>,
	qemu-devel@nongnu.org
Subject: [PATCH v2 10/12] aspeed/smc: Introduce a new addr_width() class handler
Date: Mon, 20 Sep 2021 18:23:07 +0200	[thread overview]
Message-ID: <20210920162309.1091711-11-clg@kaod.org> (raw)
In-Reply-To: <20210920162309.1091711-1-clg@kaod.org>

The AST2400 SPI controller has a transitional HW interface and it
stores the address width currently in use in a different register than
all the other SMC controllers. It needs special handling when working
in 4B mode.

Make it clear through a class handler. This also removes another use
of the segments array.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 include/hw/ssi/aspeed_smc.h |  1 +
 hw/ssi/aspeed_smc.c         | 19 ++++++++++++-------
 2 files changed, 13 insertions(+), 7 deletions(-)

diff --git a/include/hw/ssi/aspeed_smc.h b/include/hw/ssi/aspeed_smc.h
index a1ca0e65c405..8dc81294988e 100644
--- a/include/hw/ssi/aspeed_smc.h
+++ b/include/hw/ssi/aspeed_smc.h
@@ -111,6 +111,7 @@ struct AspeedSMCClass {
     void (*reg_to_segment)(const AspeedSMCState *s, uint32_t reg,
                            AspeedSegments *seg);
     void (*dma_ctrl)(AspeedSMCState *s, uint32_t value);
+    int (*addr_width)(const AspeedSMCState *s);
 };
 
 #endif /* ASPEED_SMC_H */
diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c
index 8cc7ccf45591..7129341c129e 100644
--- a/hw/ssi/aspeed_smc.c
+++ b/hw/ssi/aspeed_smc.c
@@ -196,7 +196,6 @@
  * controller. These can be changed when board is initialized with the
  * Segment Address Registers.
  */
-static const AspeedSegments aspeed_2400_spi1_segments[];
 static const AspeedSegments aspeed_2500_spi1_segments[];
 static const AspeedSegments aspeed_2500_spi2_segments[];
 
@@ -382,15 +381,15 @@ static inline int aspeed_smc_flash_cmd(const AspeedSMCFlash *fl)
     return cmd;
 }
 
-static inline int aspeed_smc_flash_is_4byte(const AspeedSMCFlash *fl)
+static inline int aspeed_smc_flash_addr_width(const AspeedSMCFlash *fl)
 {
     const AspeedSMCState *s = fl->controller;
     AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s);
 
-    if (asc->segments == aspeed_2400_spi1_segments) {
-        return s->regs[s->r_ctrl0] & CTRL_AST2400_SPI_4BYTE;
+    if (asc->addr_width) {
+        return asc->addr_width(s);
     } else {
-        return s->regs[s->r_ce_ctrl] & (1 << (CTRL_EXTENDED0 + fl->cs));
+        return s->regs[s->r_ce_ctrl] & (1 << (CTRL_EXTENDED0 + fl->cs)) ? 4 : 3;
     }
 }
 
@@ -450,7 +449,7 @@ static void aspeed_smc_flash_setup(AspeedSMCFlash *fl, uint32_t addr)
 {
     const AspeedSMCState *s = fl->controller;
     uint8_t cmd = aspeed_smc_flash_cmd(fl);
-    int i = aspeed_smc_flash_is_4byte(fl) ? 4 : 3;
+    int i = aspeed_smc_flash_addr_width(fl);
 
     /* Flash access can not exceed CS segment */
     addr = aspeed_smc_check_segment_addr(fl, addr);
@@ -558,7 +557,7 @@ static bool aspeed_smc_do_snoop(AspeedSMCFlash *fl,  uint64_t data,
                                 unsigned size)
 {
     AspeedSMCState *s = fl->controller;
-    uint8_t addr_width = aspeed_smc_flash_is_4byte(fl) ? 4 : 3;
+    uint8_t addr_width = aspeed_smc_flash_addr_width(fl);
 
     trace_aspeed_smc_do_snoop(fl->cs, s->snoop_index, s->snoop_dummies,
                               (uint8_t) data & 0xff);
@@ -1384,6 +1383,11 @@ static const AspeedSegments aspeed_2400_spi1_segments[] = {
     { 0x30000000, 64 * MiB },
 };
 
+static int aspeed_2400_spi1_addr_width(const AspeedSMCState *s)
+{
+    return s->regs[R_SPI_CTRL0] & CTRL_AST2400_SPI_4BYTE ? 4 : 3;
+}
+
 static void aspeed_2400_spi1_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
@@ -1405,6 +1409,7 @@ static void aspeed_2400_spi1_class_init(ObjectClass *klass, void *data)
     asc->segment_to_reg    = aspeed_smc_segment_to_reg;
     asc->reg_to_segment    = aspeed_smc_reg_to_segment;
     asc->dma_ctrl          = aspeed_smc_dma_ctrl;
+    asc->addr_width        = aspeed_2400_spi1_addr_width;
 }
 
 static const TypeInfo aspeed_2400_spi1_info = {
-- 
2.31.1



  parent reply	other threads:[~2021-09-20 16:40 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-20 16:22 [PATCH v2 00/12] aspeed: SMC cleanups and QOMification Cédric Le Goater
2021-09-20 16:22 ` [PATCH v2 01/12] aspeed/smc: Add watchdog Control/Status Registers Cédric Le Goater
2021-09-20 16:22 ` [PATCH v2 02/12] aspeed/smc: Introduce aspeed_smc_error() helper Cédric Le Goater
2021-09-20 16:23 ` [PATCH v2 03/12] aspeed/smc: Stop using the model name for the memory regions Cédric Le Goater
2021-09-20 16:23 ` [PATCH v2 04/12] aspeed/smc: Drop AspeedSMCController structure Cédric Le Goater
2021-09-20 16:23 ` [PATCH v2 05/12] aspeed/smc: Remove the 'flash' attribute from AspeedSMCFlash Cédric Le Goater
2021-09-20 16:23 ` [PATCH v2 06/12] aspeed/smc: Remove the 'size' " Cédric Le Goater
2021-09-20 16:23 ` [PATCH v2 07/12] aspeed/smc: Rename AspeedSMCFlash 'id' to 'cs' Cédric Le Goater
2021-09-20 16:23 ` [PATCH v2 08/12] aspeed/smc: QOMify AspeedSMCFlash Cédric Le Goater
2021-09-20 16:23 ` [PATCH v2 09/12] aspeed/smc: Add default reset values Cédric Le Goater
2021-09-20 16:23 ` Cédric Le Goater [this message]
2021-09-20 16:23 ` [PATCH v2 11/12] aspeed/smc: Remove unused attribute 'irqline' Cédric Le Goater
2021-09-20 16:23 ` [PATCH v2 12/12] aspeed/i2c: QOMify AspeedI2CBus Cédric Le Goater

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210920162309.1091711-11-clg@kaod.org \
    --to=clg@kaod.org \
    --cc=andrew@aj.id.au \
    --cc=joel@jms.id.au \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).