[PATCH v2] failover: fix unplug pending detection

[PATCH v2] failover: fix unplug pending detection

[Laurent Vivier]

Failover needs to detect the end of the PCI unplug to start migration
after the VFIO card has been unplugged.

To do that, a flag is set in pcie_cap_slot_unplug_request_cb() and reset in
pcie_unplug_device().

But since
    17858a169508 ("hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35")
we have switched to ACPI unplug and these functions are not called anymore
and the flag not set. So failover migration is not able to detect if card
is really unplugged and acts as it's done as soon as it's started. So it
doesn't wait the end of the unplug to start the migration. We don't see any
problem when we test that because ACPI unplug is faster than PCIe native
hotplug and when the migration really starts the unplug operation is
already done.

See c000a9bd06ea ("pci: mark device having guest unplug request pending")
    a99c4da9fc2a ("pci: mark devices partially unplugged")

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
---

Notes:
    v2: move partially_hotplugged to acpi_pcihp_eject_slot()

 hw/acpi/pcihp.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/hw/acpi/pcihp.c b/hw/acpi/pcihp.c
index f610a25d2ef9..7bbf13492a4f 100644
--- a/hw/acpi/pcihp.c
+++ b/hw/acpi/pcihp.c
@@ -222,9 +222,13 @@ static void acpi_pcihp_eject_slot(AcpiPciHpState *s, unsigned bsel, unsigned slo
         PCIDevice *dev = PCI_DEVICE(qdev);
         if (PCI_SLOT(dev->devfn) == slot) {
             if (!acpi_pcihp_pc_no_hotplug(s, dev)) {
-                hotplug_ctrl = qdev_get_hotplug_handler(qdev);
-                hotplug_handler_unplug(hotplug_ctrl, qdev, &error_abort);
-                object_unparent(OBJECT(qdev));
+                if (dev->partially_hotplugged) {
+                    qdev->pending_deleted_event = false;
+                } else {
+                    hotplug_ctrl = qdev_get_hotplug_handler(qdev);
+                    hotplug_handler_unplug(hotplug_ctrl, qdev, &error_abort);
+                    object_unparent(OBJECT(qdev));
+                }
             }
         }
     }
@@ -396,6 +400,7 @@ void acpi_pcihp_device_unplug_request_cb(HotplugHandler *hotplug_dev,
         return;
     }
 
+    pdev->qdev.pending_deleted_event = true;
     s->acpi_pcihp_pci_status[bsel].down |= (1U << slot);
     acpi_send_event(DEVICE(hotplug_dev), ACPI_PCI_HOTPLUG_STATUS);
 }
-- 
2.31.1

Re: [PATCH v2] failover: fix unplug pending detection

[Ani Sinha]

On Thu, 30 Sep 2021, Laurent Vivier wrote:

> Failover needs to detect the end of the PCI unplug to start migration
> after the VFIO card has been unplugged.
>
> To do that, a flag is set in pcie_cap_slot_unplug_request_cb() and reset in
> pcie_unplug_device().
>
> But since
>     17858a169508 ("hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35")
> we have switched to ACPI unplug and these functions are not called anymore
> and the flag not set. So failover migration is not able to detect if card
> is really unplugged and acts as it's done as soon as it's started. So it
> doesn't wait the end of the unplug to start the migration. We don't see any
> problem when we test that because ACPI unplug is faster than PCIe native
> hotplug and when the migration really starts the unplug operation is
> already done.
>
> See c000a9bd06ea ("pci: mark device having guest unplug request pending")
>     a99c4da9fc2a ("pci: mark devices partially unplugged")
>
> Signed-off-by: Laurent Vivier <lvivier@redhat.com>

Modulo the comment suggestion below,
Reviewed-by: Ani Sinha <ani@anisinha.ca>

> ---
>
> Notes:
>     v2: move partially_hotplugged to acpi_pcihp_eject_slot()
>
>  hw/acpi/pcihp.c | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/hw/acpi/pcihp.c b/hw/acpi/pcihp.c
> index f610a25d2ef9..7bbf13492a4f 100644
> --- a/hw/acpi/pcihp.c
> +++ b/hw/acpi/pcihp.c
> @@ -222,9 +222,13 @@ static void acpi_pcihp_eject_slot(AcpiPciHpState *s, unsigned bsel, unsigned slo
>          PCIDevice *dev = PCI_DEVICE(qdev);
>          if (PCI_SLOT(dev->devfn) == slot) {
>              if (!acpi_pcihp_pc_no_hotplug(s, dev)) {
> -                hotplug_ctrl = qdev_get_hotplug_handler(qdev);
> -                hotplug_handler_unplug(hotplug_ctrl, qdev, &error_abort);
> -                object_unparent(OBJECT(qdev));
> +                if (dev->partially_hotplugged) {

Please add a comment here as to why you are skipping full unplug and what
this flag signifies and where it is set from.

> +                    qdev->pending_deleted_event = false;
> +                } else {
> +                    hotplug_ctrl = qdev_get_hotplug_handler(qdev);
> +                    hotplug_handler_unplug(hotplug_ctrl, qdev, &error_abort);
> +                    object_unparent(OBJECT(qdev));
> +                }
>              }
>          }
>      }
> @@ -396,6 +400,7 @@ void acpi_pcihp_device_unplug_request_cb(HotplugHandler *hotplug_dev,
>          return;
>      }
>
> +    pdev->qdev.pending_deleted_event = true;
>      s->acpi_pcihp_pci_status[bsel].down |= (1U << slot);
>      acpi_send_event(DEVICE(hotplug_dev), ACPI_PCI_HOTPLUG_STATUS);
>  }
> --
> 2.31.1
>
>