From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Ani Sinha <ani@anisinha.ca>,
Peter Maydell <peter.maydell@linaro.org>,
Xiao Guangrong <xiaoguangrong.eric@gmail.com>,
Eric Auger <eric.auger@redhat.com>,
Igor Mammedov <imammedo@redhat.com>
Subject: [PULL 24/57] acpi: nvdimm_build_nfit: use acpi_table_begin()/acpi_table_end() instead of build_header()
Date: Tue, 5 Oct 2021 12:02:16 -0400 [thread overview]
Message-ID: <20211005155946.513818-25-mst@redhat.com> (raw)
In-Reply-To: <20211005155946.513818-1-mst@redhat.com>
From: Igor Mammedov <imammedo@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Also since acpi_table_begin() reserves space only for standard header
while previous acpi_data_push() reserved the header + 4 bytes field,
add 4 bytes 'Reserved' field into nvdimm_build_nfit() which didn't
have it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-11-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/acpi/nvdimm.c | 42 +++++++++++++++++-------------------------
1 file changed, 17 insertions(+), 25 deletions(-)
diff --git a/hw/acpi/nvdimm.c b/hw/acpi/nvdimm.c
index e3d5fe1939..15f6ca82ca 100644
--- a/hw/acpi/nvdimm.c
+++ b/hw/acpi/nvdimm.c
@@ -44,22 +44,6 @@ static const uint8_t nvdimm_nfit_spa_uuid[] =
UUID_LE(0x66f0d379, 0xb4f3, 0x4074, 0xac, 0x43, 0x0d, 0x33,
0x18, 0xb7, 0x8c, 0xdb);
-/*
- * NVDIMM Firmware Interface Table
- * @signature: "NFIT"
- *
- * It provides information that allows OSPM to enumerate NVDIMM present in
- * the platform and associate system physical address ranges created by the
- * NVDIMMs.
- *
- * It is defined in ACPI 6.0: 5.2.25 NVDIMM Firmware Interface Table (NFIT)
- */
-struct NvdimmNfitHeader {
- ACPI_TABLE_HEADER_DEF
- uint32_t reserved;
-} QEMU_PACKED;
-typedef struct NvdimmNfitHeader NvdimmNfitHeader;
-
/*
* define NFIT structures according to ACPI 6.0: 5.2.25 NVDIMM Firmware
* Interface Table (NFIT).
@@ -401,25 +385,33 @@ void nvdimm_plug(NVDIMMState *state)
nvdimm_build_fit_buffer(state);
}
+/*
+ * NVDIMM Firmware Interface Table
+ * @signature: "NFIT"
+ *
+ * It provides information that allows OSPM to enumerate NVDIMM present in
+ * the platform and associate system physical address ranges created by the
+ * NVDIMMs.
+ *
+ * It is defined in ACPI 6.0: 5.2.25 NVDIMM Firmware Interface Table (NFIT)
+ */
+
static void nvdimm_build_nfit(NVDIMMState *state, GArray *table_offsets,
GArray *table_data, BIOSLinker *linker,
const char *oem_id, const char *oem_table_id)
{
NvdimmFitBuffer *fit_buf = &state->fit_buf;
- unsigned int header;
+ AcpiTable table = { .sig = "NFIT", .rev = 1,
+ .oem_id = oem_id, .oem_table_id = oem_table_id };
acpi_add_table(table_offsets, table_data);
- /* NFIT header. */
- header = table_data->len;
- acpi_data_push(table_data, sizeof(NvdimmNfitHeader));
+ acpi_table_begin(&table, table_data);
+ /* Reserved */
+ build_append_int_noprefix(table_data, 0, 4);
/* NVDIMM device structures. */
g_array_append_vals(table_data, fit_buf->fit->data, fit_buf->fit->len);
-
- build_header(linker, table_data,
- (void *)(table_data->data + header), "NFIT",
- sizeof(NvdimmNfitHeader) + fit_buf->fit->len, 1, oem_id,
- oem_table_id);
+ acpi_table_end(linker, &table);
}
#define NVDIMM_DSM_MEMORY_SIZE 4096
--
MST
next prev parent reply other threads:[~2021-10-05 16:37 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-05 16:00 [PULL 00/57] pc,pci,virtio: features, fixes Michael S. Tsirkin
2021-10-05 16:00 ` [PULL 01/57] hw/virtio: Acquire RCU read lock in virtqueue_packed_drop_all() Michael S. Tsirkin
2021-10-05 16:00 ` [PULL 02/57] hw/virtio: Have virtqueue_get_avail_bytes() pass caches arg to callees Michael S. Tsirkin
2021-10-05 16:00 ` [PULL 03/57] vhost-vdpa: open device fd in net_init_vhost_vdpa() Michael S. Tsirkin
2021-10-05 16:00 ` [PULL 04/57] vhost-vdpa: classify one time request Michael S. Tsirkin
2021-10-05 16:00 ` [PULL 05/57] vhost-vdpa: prepare for the multiqueue support Michael S. Tsirkin
2021-10-05 16:01 ` [PULL 06/57] vhost-vdpa: let net_vhost_vdpa_init() returns NetClientState * Michael S. Tsirkin
2021-10-05 16:01 ` [PULL 07/57] net: introduce control client Michael S. Tsirkin
2021-10-05 16:01 ` [PULL 08/57] vhost-net: control virtqueue support Michael S. Tsirkin
2021-10-05 16:01 ` [PULL 09/57] virtio-net: use "queue_pairs" instead of "queues" when possible Michael S. Tsirkin
2021-10-05 16:01 ` [PULL 10/57] vhost: record the last virtqueue index for the virtio device Michael S. Tsirkin
2021-10-05 16:01 ` [PULL 11/57] virtio-net: vhost control virtqueue support Michael S. Tsirkin
2021-10-05 16:01 ` [PULL 12/57] vhost-vdpa: multiqueue support Michael S. Tsirkin
2021-10-05 16:01 ` [PULL 13/57] vhost-vsock: fix migration issue when seqpacket is supported Michael S. Tsirkin
2021-10-05 16:01 ` [PULL 14/57] vhost-vsock: handle common features in vhost-vsock-common Michael S. Tsirkin
2021-10-05 16:01 ` [PULL 15/57] acpi: add helper routines to initialize ACPI tables Michael S. Tsirkin
2021-10-05 16:01 ` [PULL 16/57] acpi: build_rsdt: use acpi_table_begin()/acpi_table_end() instead of build_header() Michael S. Tsirkin
2021-10-05 16:01 ` [PULL 17/57] acpi: build_xsdt: " Michael S. Tsirkin
2021-10-05 16:01 ` [PULL 18/57] acpi: build_slit: " Michael S. Tsirkin
2021-10-05 16:01 ` [PULL 19/57] acpi: build_fadt: " Michael S. Tsirkin
2021-10-05 16:01 ` [PULL 20/57] acpi: build_tpm2: " Michael S. Tsirkin
2021-10-05 16:01 ` [PULL 21/57] acpi: acpi_build_hest: " Michael S. Tsirkin
2021-10-05 16:02 ` [PULL 22/57] acpi: build_mcfg: " Michael S. Tsirkin
2021-10-05 16:02 ` [PULL 23/57] acpi: build_hmat: " Michael S. Tsirkin
2021-10-05 16:02 ` Michael S. Tsirkin [this message]
2021-10-05 16:02 ` [PULL 25/57] acpi: nvdimm_build_ssdt: " Michael S. Tsirkin
2021-10-05 16:02 ` [PULL 26/57] acpi: vmgenid_build_acpi: " Michael S. Tsirkin
2021-10-05 16:02 ` [PULL 27/57] acpi: x86: build_dsdt: " Michael S. Tsirkin
2021-10-05 16:02 ` [PULL 28/57] acpi: build_hpet: " Michael S. Tsirkin
2021-10-05 16:02 ` [PULL 29/57] acpi: build_tpm_tcpa: " Michael S. Tsirkin
2021-10-05 16:02 ` [PULL 30/57] acpi: arm/x86: build_srat: " Michael S. Tsirkin
2021-10-05 16:02 ` [PULL 31/57] acpi: use build_append_int_noprefix() API to compose SRAT table Michael S. Tsirkin
2021-10-05 16:03 ` [PULL 32/57] acpi: build_dmar_q35: use acpi_table_begin()/acpi_table_end() instead of build_header() Michael S. Tsirkin
2021-10-05 16:03 ` [PULL 33/57] acpi: build_waet: " Michael S. Tsirkin
2021-10-05 16:03 ` [PULL 34/57] acpi: build_amd_iommu: " Michael S. Tsirkin
2021-10-05 16:03 ` [PULL 35/57] acpi: madt: arm/x86: " Michael S. Tsirkin
2021-10-05 16:03 ` [PULL 36/57] acpi: x86: remove dead code Michael S. Tsirkin
2021-10-05 16:03 ` [PULL 37/57] acpi: x86: set enabled when composing _MAT entries Michael S. Tsirkin
2021-10-05 16:03 ` [PULL 38/57] acpi: x86: madt: use build_append_int_noprefix() API to compose MADT table Michael S. Tsirkin
2021-10-05 16:03 ` [PULL 39/57] acpi: arm/virt: " Michael S. Tsirkin
2021-10-05 16:03 ` [PULL 40/57] acpi: build_dsdt_microvm: use acpi_table_begin()/acpi_table_end() instead of build_header() Michael S. Tsirkin
2021-10-05 16:03 ` [PULL 41/57] acpi: arm: virt: build_dsdt: " Michael S. Tsirkin
2021-10-05 16:03 ` [PULL 42/57] acpi: arm: virt: build_iort: " Michael S. Tsirkin
2021-10-05 16:03 ` [PULL 43/57] acpi: arm/virt: convert build_iort() to endian agnostic build_append_FOO() API Michael S. Tsirkin
2021-10-05 16:03 ` [PULL 44/57] acpi: arm/virt: build_spcr: fix invalid cast Michael S. Tsirkin
2021-10-05 16:04 ` [PULL 45/57] acpi: arm/virt: build_spcr: use acpi_table_begin()/acpi_table_end() instead of build_header() Michael S. Tsirkin
2021-10-05 16:04 ` [PULL 46/57] acpi: arm/virt: build_gtdt: " Michael S. Tsirkin
2021-10-05 16:04 ` [PULL 47/57] acpi: build_facs: use build_append_int_noprefix() API to compose table Michael S. Tsirkin
2021-10-05 16:04 ` [PULL 48/57] acpi: remove no longer used build_header() Michael S. Tsirkin
2021-10-05 16:04 ` [PULL 49/57] acpi: AcpiGenericAddress no longer used to map/access fields of MMIO, drop packed attribute Michael S. Tsirkin
2021-10-05 16:04 ` [PULL 50/57] bios-tables-test: allow changes in DSDT ACPI tables for q35 Michael S. Tsirkin
2021-10-05 16:04 ` [PULL 51/57] hw/i386/acpi: fix conflicting IO address range for acpi pci hotplug in q35 Michael S. Tsirkin
2021-10-05 16:04 ` [PULL 52/57] bios-tables-test: Update ACPI DSDT table golden blobs for q35 Michael S. Tsirkin
2021-10-05 16:04 ` [PULL 53/57] virtio-balloon: Fix page-poison subsection name Michael S. Tsirkin
2021-10-05 16:04 ` [PULL 54/57] nvdimm: release the correct device list Michael S. Tsirkin
2021-10-05 16:04 ` [PULL 55/57] hw/i386/amd_iommu: Rename amdviPCI TypeInfo Michael S. Tsirkin
2021-10-05 16:04 ` [PULL 56/57] hw/i386/amd_iommu: Rename SysBus specific functions as amdvi_sysbus_X() Michael S. Tsirkin
2021-10-05 16:04 ` [PULL 57/57] hw/i386/amd_iommu: Add description/category to TYPE_AMD_IOMMU_PCI Michael S. Tsirkin
2021-10-05 17:21 ` [PULL 00/57] pc,pci,virtio: features, fixes Richard Henderson
2021-10-05 21:32 ` Michael S. Tsirkin
2021-10-05 23:36 ` Richard Henderson
2021-10-11 3:32 ` Jason Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211005155946.513818-25-mst@redhat.com \
--to=mst@redhat.com \
--cc=ani@anisinha.ca \
--cc=eric.auger@redhat.com \
--cc=imammedo@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=xiaoguangrong.eric@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).