qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Alistair Francis <alistair.francis@opensource.wdc.com>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org
Cc: alistair23@gmail.com, Philipp Tomsich <philipp.tomsich@vrull.eu>,
	Richard Henderson <richard.henderson@linaro.org>,
	Alistair Francis <alistair.francis@wdc.com>
Subject: [PULL 09/26] target/riscv: Add instructions of the Zbc-extension
Date: Thu,  7 Oct 2021 16:47:34 +1000	[thread overview]
Message-ID: <20211007064751.608580-10-alistair.francis@opensource.wdc.com> (raw)
In-Reply-To: <20211007064751.608580-1-alistair.francis@opensource.wdc.com>

From: Philipp Tomsich <philipp.tomsich@vrull.eu>

The following instructions are part of Zbc:
 - clmul
 - clmulh
 - clmulr

Note that these instructions were already defined in the pre-0.93 and
the 0.93 draft-B proposals, but had not been omitted in the earlier
addition of draft-B to QEmu.

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210911140016.834071-10-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
 target/riscv/helper.h                   |  2 ++
 target/riscv/insn32.decode              |  5 ++++
 target/riscv/bitmanip_helper.c          | 27 +++++++++++++++++++++
 target/riscv/insn_trans/trans_rvb.c.inc | 32 ++++++++++++++++++++++++-
 4 files changed, 65 insertions(+), 1 deletion(-)

diff --git a/target/riscv/helper.h b/target/riscv/helper.h
index 460eee9988..8a318a2dbc 100644
--- a/target/riscv/helper.h
+++ b/target/riscv/helper.h
@@ -63,6 +63,8 @@ DEF_HELPER_FLAGS_2(grev, TCG_CALL_NO_RWG_SE, tl, tl, tl)
 DEF_HELPER_FLAGS_2(grevw, TCG_CALL_NO_RWG_SE, tl, tl, tl)
 DEF_HELPER_FLAGS_2(gorc, TCG_CALL_NO_RWG_SE, tl, tl, tl)
 DEF_HELPER_FLAGS_2(gorcw, TCG_CALL_NO_RWG_SE, tl, tl, tl)
+DEF_HELPER_FLAGS_2(clmul, TCG_CALL_NO_RWG_SE, tl, tl, tl)
+DEF_HELPER_FLAGS_2(clmulr, TCG_CALL_NO_RWG_SE, tl, tl, tl)
 
 /* Special functions */
 DEF_HELPER_2(csrr, tl, env, int)
diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode
index 35a3563ff4..1658bb4217 100644
--- a/target/riscv/insn32.decode
+++ b/target/riscv/insn32.decode
@@ -714,6 +714,11 @@ roriw      0110000 .......... 101 ..... 0011011 @sh5
 greviw     0110100 .......... 101 ..... 0011011 @sh5
 gorciw     0010100 .......... 101 ..... 0011011 @sh5
 
+# *** RV32 Zbc Standard Extension ***
+clmul      0000101 .......... 001 ..... 0110011 @r
+clmulh     0000101 .......... 011 ..... 0110011 @r
+clmulr     0000101 .......... 010 ..... 0110011 @r
+
 # *** RV32 Zbs Standard Extension ***
 bclr       0100100 .......... 001 ..... 0110011 @r
 bclri      01001. ........... 001 ..... 0010011 @sh
diff --git a/target/riscv/bitmanip_helper.c b/target/riscv/bitmanip_helper.c
index 5b2f795d03..73be5a81c7 100644
--- a/target/riscv/bitmanip_helper.c
+++ b/target/riscv/bitmanip_helper.c
@@ -3,6 +3,7 @@
  *
  * Copyright (c) 2020 Kito Cheng, kito.cheng@sifive.com
  * Copyright (c) 2020 Frank Chang, frank.chang@sifive.com
+ * Copyright (c) 2021 Philipp Tomsich, philipp.tomsich@vrull.eu
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -88,3 +89,29 @@ target_ulong HELPER(gorcw)(target_ulong rs1, target_ulong rs2)
 {
     return do_gorc(rs1, rs2, 32);
 }
+
+target_ulong HELPER(clmul)(target_ulong rs1, target_ulong rs2)
+{
+    target_ulong result = 0;
+
+    for (int i = 0; i < TARGET_LONG_BITS; i++) {
+        if ((rs2 >> i) & 1) {
+            result ^= (rs1 << i);
+        }
+    }
+
+    return result;
+}
+
+target_ulong HELPER(clmulr)(target_ulong rs1, target_ulong rs2)
+{
+    target_ulong result = 0;
+
+    for (int i = 0; i < TARGET_LONG_BITS; i++) {
+        if ((rs2 >> i) & 1) {
+            result ^= (rs1 >> (TARGET_LONG_BITS - i - 1));
+        }
+    }
+
+    return result;
+}
diff --git a/target/riscv/insn_trans/trans_rvb.c.inc b/target/riscv/insn_trans/trans_rvb.c.inc
index 861364e3e5..2eb5fa3640 100644
--- a/target/riscv/insn_trans/trans_rvb.c.inc
+++ b/target/riscv/insn_trans/trans_rvb.c.inc
@@ -1,5 +1,5 @@
 /*
- * RISC-V translation routines for the RVB draft Zb[as] Standard Extension.
+ * RISC-V translation routines for the Zb[acs] Standard Extension.
  *
  * Copyright (c) 2020 Kito Cheng, kito.cheng@sifive.com
  * Copyright (c) 2020 Frank Chang, frank.chang@sifive.com
@@ -24,6 +24,12 @@
     }                                            \
 } while (0)
 
+#define REQUIRE_ZBC(ctx) do {                    \
+    if (!RISCV_CPU(ctx->cs)->cfg.ext_zbc) {      \
+        return false;                            \
+    }                                            \
+} while (0)
+
 #define REQUIRE_ZBS(ctx) do {                    \
     if (!RISCV_CPU(ctx->cs)->cfg.ext_zbs) {      \
         return false;                            \
@@ -535,3 +541,27 @@ static bool trans_slli_uw(DisasContext *ctx, arg_slli_uw *a)
     REQUIRE_ZBA(ctx);
     return gen_shift_imm_fn(ctx, a, EXT_NONE, gen_slli_uw);
 }
+
+static bool trans_clmul(DisasContext *ctx, arg_clmul *a)
+{
+    REQUIRE_ZBC(ctx);
+    return gen_arith(ctx, a, EXT_NONE, gen_helper_clmul);
+}
+
+static void gen_clmulh(TCGv dst, TCGv src1, TCGv src2)
+{
+     gen_helper_clmulr(dst, src1, src2);
+     tcg_gen_shri_tl(dst, dst, 1);
+}
+
+static bool trans_clmulh(DisasContext *ctx, arg_clmulr *a)
+{
+    REQUIRE_ZBC(ctx);
+    return gen_arith(ctx, a, EXT_NONE, gen_clmulh);
+}
+
+static bool trans_clmulr(DisasContext *ctx, arg_clmulh *a)
+{
+    REQUIRE_ZBC(ctx);
+    return gen_arith(ctx, a, EXT_NONE, gen_helper_clmulr);
+}
-- 
2.31.1



  parent reply	other threads:[~2021-10-07  6:55 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-07  6:47 [PULL 00/26] riscv-to-apply queue Alistair Francis
2021-10-07  6:47 ` [PULL 01/26] target/riscv: Introduce temporary in gen_add_uw() Alistair Francis
2021-10-07  6:47 ` [PULL 02/26] target/riscv: fix clzw implementation to operate on arg1 Alistair Francis
2021-10-07  6:47 ` [PULL 03/26] target/riscv: clwz must ignore high bits (use shift-left & changed logic) Alistair Francis
2021-10-07  6:47 ` [PULL 04/26] target/riscv: Add x-zba, x-zbb, x-zbc and x-zbs properties Alistair Francis
2021-10-07  6:47 ` [PULL 05/26] target/riscv: Reassign instructions to the Zba-extension Alistair Francis
2021-10-07  6:47 ` [PULL 06/26] target/riscv: Remove the W-form instructions from Zbs Alistair Francis
2021-10-07  6:47 ` [PULL 07/26] target/riscv: Remove shift-one instructions (proposed Zbo in pre-0.93 draft-B) Alistair Francis
2021-10-07  6:47 ` [PULL 08/26] target/riscv: Reassign instructions to the Zbs-extension Alistair Francis
2021-10-07  6:47 ` Alistair Francis [this message]
2021-10-07  6:47 ` [PULL 10/26] target/riscv: Reassign instructions to the Zbb-extension Alistair Francis
2021-10-07  6:47 ` [PULL 11/26] target/riscv: Add orc.b instruction for Zbb, removing gorc/gorci Alistair Francis
2021-10-13  9:36   ` Vincent Palatin
2021-10-13  9:37     ` [PATCH v1A] target/riscv: fix orc.b instruction in the Zbb extension Vincent Palatin
2021-10-13  9:38     ` [PATCH v1B] " Vincent Palatin
2021-10-13 13:12     ` [PULL 11/26] target/riscv: Add orc.b instruction for Zbb, removing gorc/gorci Philipp Tomsich
2021-10-13 13:44       ` Vincent Palatin
2021-10-13 13:49         ` Philipp Tomsich
2021-10-13 16:20           ` Vineet Gupta
2021-10-13 16:51             ` Richard Henderson
2021-10-13 17:00               ` Philipp Tomsich
2021-10-07  6:47 ` [PULL 12/26] target/riscv: Add a REQUIRE_32BIT macro Alistair Francis
2021-10-07  6:47 ` [PULL 13/26] target/riscv: Add rev8 instruction, removing grev/grevi Alistair Francis
2021-10-07  6:47 ` [PULL 14/26] target/riscv: Add zext.h instructions to Zbb, removing pack/packu/packh Alistair Francis
2021-10-07  6:47 ` [PULL 15/26] target/riscv: Remove RVB (replaced by Zb[abcs]) Alistair Francis
2021-10-07  6:47 ` [PULL 16/26] disas/riscv: Add Zb[abcs] instructions Alistair Francis
2021-10-07  6:47 ` [PULL 17/26] target/riscv: Set mstatus_hs.[SD|FS] bits if Clean and V=1 in mark_fs_dirty() Alistair Francis
2021-10-07  6:47 ` [PULL 18/26] hw/char: ibex_uart: Register device in 'input' category Alistair Francis
2021-10-07  6:47 ` [PULL 19/26] hw/char: shakti_uart: " Alistair Francis
2021-10-07  6:47 ` [PULL 20/26] hw/char: sifive_uart: " Alistair Francis
2021-10-07  6:47 ` [PULL 21/26] hw/char/mchp_pfsoc_mmuart: Simplify MCHP_PFSOC_MMUART_REG definition Alistair Francis
2021-10-07  6:47 ` [PULL 22/26] hw/char/mchp_pfsoc_mmuart: Use a MemoryRegion container Alistair Francis
2021-10-07  6:47 ` [PULL 23/26] hw/char/mchp_pfsoc_mmuart: QOM'ify PolarFire MMUART Alistair Francis
2021-10-07  6:47 ` [PULL 24/26] hw/dma: sifive_pdma: Fix Control.claim bit detection Alistair Francis
2021-10-07  6:47 ` [PULL 25/26] hw/dma: sifive_pdma: Don't run DMA when channel is disclaimed Alistair Francis
2021-10-07  6:47 ` [PULL 26/26] hw/riscv: shakti_c: Mark as not user creatable Alistair Francis
2021-10-07 17:25 ` [PULL 00/26] riscv-to-apply queue Richard Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211007064751.608580-10-alistair.francis@opensource.wdc.com \
    --to=alistair.francis@opensource.wdc.com \
    --cc=alistair.francis@wdc.com \
    --cc=alistair23@gmail.com \
    --cc=peter.maydell@linaro.org \
    --cc=philipp.tomsich@vrull.eu \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).