* [PATCH V4 01/10] vhost-vdpa: open device fd in net_init_vhost_vdpa()
2021-10-11 4:28 [PATCH V4 00/10] vhost-vDPA multiqueue Jason Wang
@ 2021-10-11 4:28 ` Jason Wang
2021-10-11 4:28 ` [PATCH V4 02/10] vhost-vdpa: classify one time request Jason Wang
` (9 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Jason Wang @ 2021-10-11 4:28 UTC (permalink / raw)
To: mst, jasowang, qemu-devel
Cc: lulu, gdawar, eperezma, elic, lingshan.zhu, Stefano Garzarella
This patch switches to open device fd in net_init_vhost_vpda(). This is
used to prepare for the multiqueue support.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210907090322.1756-2-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
net/vhost-vdpa.c | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)
diff --git a/net/vhost-vdpa.c b/net/vhost-vdpa.c
index 912686457c..73d29a74ef 100644
--- a/net/vhost-vdpa.c
+++ b/net/vhost-vdpa.c
@@ -156,24 +156,19 @@ static NetClientInfo net_vhost_vdpa_info = {
};
static int net_vhost_vdpa_init(NetClientState *peer, const char *device,
- const char *name, const char *vhostdev)
+ const char *name, int vdpa_device_fd)
{
NetClientState *nc = NULL;
VhostVDPAState *s;
- int vdpa_device_fd = -1;
int ret = 0;
assert(name);
nc = qemu_new_net_client(&net_vhost_vdpa_info, peer, device, name);
snprintf(nc->info_str, sizeof(nc->info_str), TYPE_VHOST_VDPA);
s = DO_UPCAST(VhostVDPAState, nc, nc);
- vdpa_device_fd = qemu_open_old(vhostdev, O_RDWR);
- if (vdpa_device_fd == -1) {
- return -errno;
- }
+
s->vhost_vdpa.device_fd = vdpa_device_fd;
ret = vhost_vdpa_add(nc, (void *)&s->vhost_vdpa);
if (ret) {
- qemu_close(vdpa_device_fd);
qemu_del_net_client(nc);
}
return ret;
@@ -201,6 +196,7 @@ int net_init_vhost_vdpa(const Netdev *netdev, const char *name,
NetClientState *peer, Error **errp)
{
const NetdevVhostVDPAOptions *opts;
+ int vdpa_device_fd, ret;
assert(netdev->type == NET_CLIENT_DRIVER_VHOST_VDPA);
opts = &netdev->u.vhost_vdpa;
@@ -209,5 +205,16 @@ int net_init_vhost_vdpa(const Netdev *netdev, const char *name,
(char *)name, errp)) {
return -1;
}
- return net_vhost_vdpa_init(peer, TYPE_VHOST_VDPA, name, opts->vhostdev);
+
+ vdpa_device_fd = qemu_open_old(opts->vhostdev, O_RDWR);
+ if (vdpa_device_fd == -1) {
+ return -errno;
+ }
+
+ ret = net_vhost_vdpa_init(peer, TYPE_VHOST_VDPA, name, vdpa_device_fd);
+ if (ret) {
+ qemu_close(vdpa_device_fd);
+ }
+
+ return ret;
}
--
2.25.1
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH V4 02/10] vhost-vdpa: classify one time request
2021-10-11 4:28 [PATCH V4 00/10] vhost-vDPA multiqueue Jason Wang
2021-10-11 4:28 ` [PATCH V4 01/10] vhost-vdpa: open device fd in net_init_vhost_vdpa() Jason Wang
@ 2021-10-11 4:28 ` Jason Wang
2021-10-11 4:28 ` [PATCH V4 03/10] vhost-vdpa: prepare for the multiqueue support Jason Wang
` (8 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Jason Wang @ 2021-10-11 4:28 UTC (permalink / raw)
To: mst, jasowang, qemu-devel; +Cc: eperezma, elic, gdawar, lingshan.zhu, lulu
Vhost-vdpa uses one device multiqueue queue (pairs) model. So we need
to classify the one time request (e.g SET_OWNER) and make sure those
request were only called once per device.
This is used for multiqueue support.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210907090322.1756-3-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/virtio/vhost-vdpa.c | 52 ++++++++++++++++++++++++++++++----
include/hw/virtio/vhost-vdpa.h | 1 +
2 files changed, 47 insertions(+), 6 deletions(-)
diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c
index 47d7a5a23d..edac4017da 100644
--- a/hw/virtio/vhost-vdpa.c
+++ b/hw/virtio/vhost-vdpa.c
@@ -279,6 +279,13 @@ static void vhost_vdpa_add_status(struct vhost_dev *dev, uint8_t status)
vhost_vdpa_call(dev, VHOST_VDPA_SET_STATUS, &s);
}
+static bool vhost_vdpa_one_time_request(struct vhost_dev *dev)
+{
+ struct vhost_vdpa *v = dev->opaque;
+
+ return v->index != 0;
+}
+
static int vhost_vdpa_init(struct vhost_dev *dev, void *opaque, Error **errp)
{
struct vhost_vdpa *v;
@@ -291,6 +298,10 @@ static int vhost_vdpa_init(struct vhost_dev *dev, void *opaque, Error **errp)
v->listener = vhost_vdpa_memory_listener;
v->msg_type = VHOST_IOTLB_MSG_V2;
+ if (vhost_vdpa_one_time_request(dev)) {
+ return 0;
+ }
+
vhost_vdpa_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE |
VIRTIO_CONFIG_S_DRIVER);
@@ -401,6 +412,10 @@ static int vhost_vdpa_memslots_limit(struct vhost_dev *dev)
static int vhost_vdpa_set_mem_table(struct vhost_dev *dev,
struct vhost_memory *mem)
{
+ if (vhost_vdpa_one_time_request(dev)) {
+ return 0;
+ }
+
trace_vhost_vdpa_set_mem_table(dev, mem->nregions, mem->padding);
if (trace_event_get_state_backends(TRACE_VHOST_VDPA_SET_MEM_TABLE) &&
trace_event_get_state_backends(TRACE_VHOST_VDPA_DUMP_REGIONS)) {
@@ -424,6 +439,11 @@ static int vhost_vdpa_set_features(struct vhost_dev *dev,
uint64_t features)
{
int ret;
+
+ if (vhost_vdpa_one_time_request(dev)) {
+ return 0;
+ }
+
trace_vhost_vdpa_set_features(dev, features);
ret = vhost_vdpa_call(dev, VHOST_SET_FEATURES, &features);
uint8_t status = 0;
@@ -448,9 +468,12 @@ static int vhost_vdpa_set_backend_cap(struct vhost_dev *dev)
}
features &= f;
- r = vhost_vdpa_call(dev, VHOST_SET_BACKEND_FEATURES, &features);
- if (r) {
- return -EFAULT;
+
+ if (vhost_vdpa_one_time_request(dev)) {
+ r = vhost_vdpa_call(dev, VHOST_SET_BACKEND_FEATURES, &features);
+ if (r) {
+ return -EFAULT;
+ }
}
dev->backend_cap = features;
@@ -559,11 +582,21 @@ static int vhost_vdpa_dev_start(struct vhost_dev *dev, bool started)
{
struct vhost_vdpa *v = dev->opaque;
trace_vhost_vdpa_dev_start(dev, started);
+
if (started) {
- uint8_t status = 0;
- memory_listener_register(&v->listener, &address_space_memory);
vhost_vdpa_host_notifiers_init(dev);
vhost_vdpa_set_vring_ready(dev);
+ } else {
+ vhost_vdpa_host_notifiers_uninit(dev, dev->nvqs);
+ }
+
+ if (vhost_vdpa_one_time_request(dev)) {
+ return 0;
+ }
+
+ if (started) {
+ uint8_t status = 0;
+ memory_listener_register(&v->listener, &address_space_memory);
vhost_vdpa_add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);
vhost_vdpa_call(dev, VHOST_VDPA_GET_STATUS, &status);
@@ -572,7 +605,6 @@ static int vhost_vdpa_dev_start(struct vhost_dev *dev, bool started)
vhost_vdpa_reset_device(dev);
vhost_vdpa_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE |
VIRTIO_CONFIG_S_DRIVER);
- vhost_vdpa_host_notifiers_uninit(dev, dev->nvqs);
memory_listener_unregister(&v->listener);
return 0;
@@ -582,6 +614,10 @@ static int vhost_vdpa_dev_start(struct vhost_dev *dev, bool started)
static int vhost_vdpa_set_log_base(struct vhost_dev *dev, uint64_t base,
struct vhost_log *log)
{
+ if (vhost_vdpa_one_time_request(dev)) {
+ return 0;
+ }
+
trace_vhost_vdpa_set_log_base(dev, base, log->size, log->refcnt, log->fd,
log->log);
return vhost_vdpa_call(dev, VHOST_SET_LOG_BASE, &base);
@@ -647,6 +683,10 @@ static int vhost_vdpa_get_features(struct vhost_dev *dev,
static int vhost_vdpa_set_owner(struct vhost_dev *dev)
{
+ if (vhost_vdpa_one_time_request(dev)) {
+ return 0;
+ }
+
trace_vhost_vdpa_set_owner(dev);
return vhost_vdpa_call(dev, VHOST_SET_OWNER, NULL);
}
diff --git a/include/hw/virtio/vhost-vdpa.h b/include/hw/virtio/vhost-vdpa.h
index a8963da2d9..6b9288fef8 100644
--- a/include/hw/virtio/vhost-vdpa.h
+++ b/include/hw/virtio/vhost-vdpa.h
@@ -21,6 +21,7 @@ typedef struct VhostVDPAHostNotifier {
typedef struct vhost_vdpa {
int device_fd;
+ int index;
uint32_t msg_type;
bool iotlb_batch_begin_sent;
MemoryListener listener;
--
2.25.1
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH V4 03/10] vhost-vdpa: prepare for the multiqueue support
2021-10-11 4:28 [PATCH V4 00/10] vhost-vDPA multiqueue Jason Wang
2021-10-11 4:28 ` [PATCH V4 01/10] vhost-vdpa: open device fd in net_init_vhost_vdpa() Jason Wang
2021-10-11 4:28 ` [PATCH V4 02/10] vhost-vdpa: classify one time request Jason Wang
@ 2021-10-11 4:28 ` Jason Wang
2021-10-18 15:44 ` Stefano Garzarella
2021-10-11 4:28 ` [PATCH V4 04/10] vhost-vdpa: let net_vhost_vdpa_init() returns NetClientState * Jason Wang
` (7 subsequent siblings)
10 siblings, 1 reply; 17+ messages in thread
From: Jason Wang @ 2021-10-11 4:28 UTC (permalink / raw)
To: mst, jasowang, qemu-devel; +Cc: eperezma, elic, gdawar, lingshan.zhu, lulu
Unlike vhost-kernel, vhost-vdpa adapts a single device multiqueue
model. So we need to simply use virtqueue index as the vhost virtqueue
index. This is a must for multiqueue to work for vhost-vdpa.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210907090322.1756-4-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/virtio/vhost-vdpa.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c
index edac4017da..8587d30918 100644
--- a/hw/virtio/vhost-vdpa.c
+++ b/hw/virtio/vhost-vdpa.c
@@ -504,8 +504,8 @@ static int vhost_vdpa_get_vq_index(struct vhost_dev *dev, int idx)
{
assert(idx >= dev->vq_index && idx < dev->vq_index + dev->nvqs);
- trace_vhost_vdpa_get_vq_index(dev, idx, idx - dev->vq_index);
- return idx - dev->vq_index;
+ trace_vhost_vdpa_get_vq_index(dev, idx, idx);
+ return idx;
}
static int vhost_vdpa_set_vring_ready(struct vhost_dev *dev)
--
2.25.1
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH V4 03/10] vhost-vdpa: prepare for the multiqueue support
2021-10-11 4:28 ` [PATCH V4 03/10] vhost-vdpa: prepare for the multiqueue support Jason Wang
@ 2021-10-18 15:44 ` Stefano Garzarella
2021-10-20 2:50 ` Jason Wang
0 siblings, 1 reply; 17+ messages in thread
From: Stefano Garzarella @ 2021-10-18 15:44 UTC (permalink / raw)
To: Jason Wang; +Cc: lulu, mst, qemu-devel, gdawar, eperezma, lingshan.zhu, elic
On Mon, Oct 11, 2021 at 12:28:22PM +0800, Jason Wang wrote:
>Unlike vhost-kernel, vhost-vdpa adapts a single device multiqueue
>model. So we need to simply use virtqueue index as the vhost virtqueue
>index. This is a must for multiqueue to work for vhost-vdpa.
>
>Signed-off-by: Jason Wang <jasowang@redhat.com>
>Message-Id: <20210907090322.1756-4-jasowang@redhat.com>
>Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
>Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
>---
> hw/virtio/vhost-vdpa.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
>diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c
>index edac4017da..8587d30918 100644
>--- a/hw/virtio/vhost-vdpa.c
>+++ b/hw/virtio/vhost-vdpa.c
>@@ -504,8 +504,8 @@ static int vhost_vdpa_get_vq_index(struct vhost_dev *dev, int idx)
> {
> assert(idx >= dev->vq_index && idx < dev->vq_index + dev->nvqs);
Should we also change this assert?
Thanks,
Stefano
>
>- trace_vhost_vdpa_get_vq_index(dev, idx, idx - dev->vq_index);
>- return idx - dev->vq_index;
>+ trace_vhost_vdpa_get_vq_index(dev, idx, idx);
>+ return idx;
> }
>
> static int vhost_vdpa_set_vring_ready(struct vhost_dev *dev)
>--
>2.25.1
>
>
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [PATCH V4 03/10] vhost-vdpa: prepare for the multiqueue support
2021-10-18 15:44 ` Stefano Garzarella
@ 2021-10-20 2:50 ` Jason Wang
0 siblings, 0 replies; 17+ messages in thread
From: Jason Wang @ 2021-10-20 2:50 UTC (permalink / raw)
To: Stefano Garzarella
Cc: Cindy Lu, mst, qemu-devel, Gautam Dawar, eperezma, Zhu Lingshan,
Eli Cohen
On Mon, Oct 18, 2021 at 11:44 PM Stefano Garzarella <sgarzare@redhat.com> wrote:
>
> On Mon, Oct 11, 2021 at 12:28:22PM +0800, Jason Wang wrote:
> >Unlike vhost-kernel, vhost-vdpa adapts a single device multiqueue
> >model. So we need to simply use virtqueue index as the vhost virtqueue
> >index. This is a must for multiqueue to work for vhost-vdpa.
> >
> >Signed-off-by: Jason Wang <jasowang@redhat.com>
> >Message-Id: <20210907090322.1756-4-jasowang@redhat.com>
> >Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
> >Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
> >---
> > hw/virtio/vhost-vdpa.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> >diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c
> >index edac4017da..8587d30918 100644
> >--- a/hw/virtio/vhost-vdpa.c
> >+++ b/hw/virtio/vhost-vdpa.c
> >@@ -504,8 +504,8 @@ static int vhost_vdpa_get_vq_index(struct vhost_dev *dev, int idx)
> > {
> > assert(idx >= dev->vq_index && idx < dev->vq_index + dev->nvqs);
>
> Should we also change this assert?
I think this assert applies to multi-queue as well.
Thanks
>
> Thanks,
> Stefano
>
> >
> >- trace_vhost_vdpa_get_vq_index(dev, idx, idx - dev->vq_index);
> >- return idx - dev->vq_index;
> >+ trace_vhost_vdpa_get_vq_index(dev, idx, idx);
> >+ return idx;
> > }
> >
> > static int vhost_vdpa_set_vring_ready(struct vhost_dev *dev)
> >--
> >2.25.1
> >
> >
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH V4 04/10] vhost-vdpa: let net_vhost_vdpa_init() returns NetClientState *
2021-10-11 4:28 [PATCH V4 00/10] vhost-vDPA multiqueue Jason Wang
` (2 preceding siblings ...)
2021-10-11 4:28 ` [PATCH V4 03/10] vhost-vdpa: prepare for the multiqueue support Jason Wang
@ 2021-10-11 4:28 ` Jason Wang
2021-10-11 4:28 ` [PATCH V4 05/10] net: introduce control client Jason Wang
` (6 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Jason Wang @ 2021-10-11 4:28 UTC (permalink / raw)
To: mst, jasowang, qemu-devel; +Cc: eperezma, elic, gdawar, lingshan.zhu, lulu
This patch switches to let net_vhost_vdpa_init() to return
NetClientState *. This is used for the callers to allocate multiqueue
NetClientState for multiqueue support.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210907090322.1756-5-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
net/vhost-vdpa.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/net/vhost-vdpa.c b/net/vhost-vdpa.c
index 73d29a74ef..834dab28dd 100644
--- a/net/vhost-vdpa.c
+++ b/net/vhost-vdpa.c
@@ -155,8 +155,10 @@ static NetClientInfo net_vhost_vdpa_info = {
.has_ufo = vhost_vdpa_has_ufo,
};
-static int net_vhost_vdpa_init(NetClientState *peer, const char *device,
- const char *name, int vdpa_device_fd)
+static NetClientState *net_vhost_vdpa_init(NetClientState *peer,
+ const char *device,
+ const char *name,
+ int vdpa_device_fd)
{
NetClientState *nc = NULL;
VhostVDPAState *s;
@@ -170,8 +172,9 @@ static int net_vhost_vdpa_init(NetClientState *peer, const char *device,
ret = vhost_vdpa_add(nc, (void *)&s->vhost_vdpa);
if (ret) {
qemu_del_net_client(nc);
+ return NULL;
}
- return ret;
+ return nc;
}
static int net_vhost_check_net(void *opaque, QemuOpts *opts, Error **errp)
@@ -196,7 +199,8 @@ int net_init_vhost_vdpa(const Netdev *netdev, const char *name,
NetClientState *peer, Error **errp)
{
const NetdevVhostVDPAOptions *opts;
- int vdpa_device_fd, ret;
+ int vdpa_device_fd;
+ NetClientState *nc;
assert(netdev->type == NET_CLIENT_DRIVER_VHOST_VDPA);
opts = &netdev->u.vhost_vdpa;
@@ -211,10 +215,11 @@ int net_init_vhost_vdpa(const Netdev *netdev, const char *name,
return -errno;
}
- ret = net_vhost_vdpa_init(peer, TYPE_VHOST_VDPA, name, vdpa_device_fd);
- if (ret) {
+ nc = net_vhost_vdpa_init(peer, TYPE_VHOST_VDPA, name, vdpa_device_fd);
+ if (!nc) {
qemu_close(vdpa_device_fd);
+ return -1;
}
- return ret;
+ return 0;
}
--
2.25.1
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH V4 05/10] net: introduce control client
2021-10-11 4:28 [PATCH V4 00/10] vhost-vDPA multiqueue Jason Wang
` (3 preceding siblings ...)
2021-10-11 4:28 ` [PATCH V4 04/10] vhost-vdpa: let net_vhost_vdpa_init() returns NetClientState * Jason Wang
@ 2021-10-11 4:28 ` Jason Wang
2021-10-11 4:28 ` [PATCH V4 06/10] vhost-net: control virtqueue support Jason Wang
` (5 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Jason Wang @ 2021-10-11 4:28 UTC (permalink / raw)
To: mst, jasowang, qemu-devel; +Cc: eperezma, elic, gdawar, lingshan.zhu, lulu
This patch introduces a boolean for the device has control queue which
can accepts control command via network queue.
The first user would be the control virtqueue support for vhost.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210907090322.1756-6-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
include/net/net.h | 5 +++++
net/net.c | 24 +++++++++++++++++++++---
2 files changed, 26 insertions(+), 3 deletions(-)
diff --git a/include/net/net.h b/include/net/net.h
index 5d1508081f..4f400b8a09 100644
--- a/include/net/net.h
+++ b/include/net/net.h
@@ -103,6 +103,7 @@ struct NetClientState {
int vnet_hdr_len;
bool is_netdev;
bool do_not_pad; /* do not pad to the minimum ethernet frame length */
+ bool is_datapath;
QTAILQ_HEAD(, NetFilterState) filters;
};
@@ -134,6 +135,10 @@ NetClientState *qemu_new_net_client(NetClientInfo *info,
NetClientState *peer,
const char *model,
const char *name);
+NetClientState *qemu_new_net_control_client(NetClientInfo *info,
+ NetClientState *peer,
+ const char *model,
+ const char *name);
NICState *qemu_new_nic(NetClientInfo *info,
NICConf *conf,
const char *model,
diff --git a/net/net.c b/net/net.c
index 52c99196c6..f0d14dbfc1 100644
--- a/net/net.c
+++ b/net/net.c
@@ -239,7 +239,8 @@ static void qemu_net_client_setup(NetClientState *nc,
NetClientState *peer,
const char *model,
const char *name,
- NetClientDestructor *destructor)
+ NetClientDestructor *destructor,
+ bool is_datapath)
{
nc->info = info;
nc->model = g_strdup(model);
@@ -258,6 +259,7 @@ static void qemu_net_client_setup(NetClientState *nc,
nc->incoming_queue = qemu_new_net_queue(qemu_deliver_packet_iov, nc);
nc->destructor = destructor;
+ nc->is_datapath = is_datapath;
QTAILQ_INIT(&nc->filters);
}
@@ -272,7 +274,23 @@ NetClientState *qemu_new_net_client(NetClientInfo *info,
nc = g_malloc0(info->size);
qemu_net_client_setup(nc, info, peer, model, name,
- qemu_net_client_destructor);
+ qemu_net_client_destructor, true);
+
+ return nc;
+}
+
+NetClientState *qemu_new_net_control_client(NetClientInfo *info,
+ NetClientState *peer,
+ const char *model,
+ const char *name)
+{
+ NetClientState *nc;
+
+ assert(info->size >= sizeof(NetClientState));
+
+ nc = g_malloc0(info->size);
+ qemu_net_client_setup(nc, info, peer, model, name,
+ qemu_net_client_destructor, false);
return nc;
}
@@ -297,7 +315,7 @@ NICState *qemu_new_nic(NetClientInfo *info,
for (i = 0; i < queues; i++) {
qemu_net_client_setup(&nic->ncs[i], info, peers[i], model, name,
- NULL);
+ NULL, true);
nic->ncs[i].queue_index = i;
}
--
2.25.1
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH V4 06/10] vhost-net: control virtqueue support
2021-10-11 4:28 [PATCH V4 00/10] vhost-vDPA multiqueue Jason Wang
` (4 preceding siblings ...)
2021-10-11 4:28 ` [PATCH V4 05/10] net: introduce control client Jason Wang
@ 2021-10-11 4:28 ` Jason Wang
2021-10-11 4:28 ` [PATCH V4 07/10] virtio-net: use "queue_pairs" instead of "queues" when possible Jason Wang
` (4 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Jason Wang @ 2021-10-11 4:28 UTC (permalink / raw)
To: mst, jasowang, qemu-devel; +Cc: eperezma, elic, gdawar, lingshan.zhu, lulu
We assume there's no cvq in the past, this is not true when we need
control virtqueue support for vhost-user backends. So this patch
implements the control virtqueue support for vhost-net. As datapath,
the control virtqueue is also required to be coupled with the
NetClientState. The vhost_net_start/stop() are tweaked to accept the
number of datapath queue pairs plus the the number of control
virtqueue for us to start and stop the vhost device.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210907090322.1756-7-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/net/vhost_net-stub.c | 4 ++--
hw/net/vhost_net.c | 43 ++++++++++++++++++++++++++++++-----------
hw/net/virtio-net.c | 4 ++--
include/net/vhost_net.h | 6 ++++--
4 files changed, 40 insertions(+), 17 deletions(-)
diff --git a/hw/net/vhost_net-stub.c b/hw/net/vhost_net-stub.c
index a7f4252630..89d71cfb8e 100644
--- a/hw/net/vhost_net-stub.c
+++ b/hw/net/vhost_net-stub.c
@@ -33,13 +33,13 @@ struct vhost_net *vhost_net_init(VhostNetOptions *options)
int vhost_net_start(VirtIODevice *dev,
NetClientState *ncs,
- int total_queues)
+ int data_queue_pairs, int cvq)
{
return -ENOSYS;
}
void vhost_net_stop(VirtIODevice *dev,
NetClientState *ncs,
- int total_queues)
+ int data_queue_pairs, int cvq)
{
}
diff --git a/hw/net/vhost_net.c b/hw/net/vhost_net.c
index 386ec2eaa2..e1e9d1ec89 100644
--- a/hw/net/vhost_net.c
+++ b/hw/net/vhost_net.c
@@ -315,11 +315,14 @@ static void vhost_net_stop_one(struct vhost_net *net,
}
int vhost_net_start(VirtIODevice *dev, NetClientState *ncs,
- int total_queues)
+ int data_queue_pairs, int cvq)
{
BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(dev)));
VirtioBusState *vbus = VIRTIO_BUS(qbus);
VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(vbus);
+ int total_notifiers = data_queue_pairs * 2 + cvq;
+ VirtIONet *n = VIRTIO_NET(dev);
+ int nvhosts = data_queue_pairs + cvq;
struct vhost_net *net;
int r, e, i;
NetClientState *peer;
@@ -329,9 +332,14 @@ int vhost_net_start(VirtIODevice *dev, NetClientState *ncs,
return -ENOSYS;
}
- for (i = 0; i < total_queues; i++) {
+ for (i = 0; i < nvhosts; i++) {
+
+ if (i < data_queue_pairs) {
+ peer = qemu_get_peer(ncs, i);
+ } else { /* Control Virtqueue */
+ peer = qemu_get_peer(ncs, n->max_queues);
+ }
- peer = qemu_get_peer(ncs, i);
net = get_vhost_net(peer);
vhost_net_set_vq_index(net, i * 2);
@@ -344,14 +352,18 @@ int vhost_net_start(VirtIODevice *dev, NetClientState *ncs,
}
}
- r = k->set_guest_notifiers(qbus->parent, total_queues * 2, true);
+ r = k->set_guest_notifiers(qbus->parent, total_notifiers, true);
if (r < 0) {
error_report("Error binding guest notifier: %d", -r);
goto err;
}
- for (i = 0; i < total_queues; i++) {
- peer = qemu_get_peer(ncs, i);
+ for (i = 0; i < nvhosts; i++) {
+ if (i < data_queue_pairs) {
+ peer = qemu_get_peer(ncs, i);
+ } else {
+ peer = qemu_get_peer(ncs, n->max_queues);
+ }
r = vhost_net_start_one(get_vhost_net(peer), dev);
if (r < 0) {
@@ -375,7 +387,7 @@ err_start:
peer = qemu_get_peer(ncs , i);
vhost_net_stop_one(get_vhost_net(peer), dev);
}
- e = k->set_guest_notifiers(qbus->parent, total_queues * 2, false);
+ e = k->set_guest_notifiers(qbus->parent, total_notifiers, false);
if (e < 0) {
fprintf(stderr, "vhost guest notifier cleanup failed: %d\n", e);
fflush(stderr);
@@ -385,18 +397,27 @@ err:
}
void vhost_net_stop(VirtIODevice *dev, NetClientState *ncs,
- int total_queues)
+ int data_queue_pairs, int cvq)
{
BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(dev)));
VirtioBusState *vbus = VIRTIO_BUS(qbus);
VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(vbus);
+ VirtIONet *n = VIRTIO_NET(dev);
+ NetClientState *peer;
+ int total_notifiers = data_queue_pairs * 2 + cvq;
+ int nvhosts = data_queue_pairs + cvq;
int i, r;
- for (i = 0; i < total_queues; i++) {
- vhost_net_stop_one(get_vhost_net(ncs[i].peer), dev);
+ for (i = 0; i < nvhosts; i++) {
+ if (i < data_queue_pairs) {
+ peer = qemu_get_peer(ncs, i);
+ } else {
+ peer = qemu_get_peer(ncs, n->max_queues);
+ }
+ vhost_net_stop_one(get_vhost_net(peer), dev);
}
- r = k->set_guest_notifiers(qbus->parent, total_queues * 2, false);
+ r = k->set_guest_notifiers(qbus->parent, total_notifiers, false);
if (r < 0) {
fprintf(stderr, "vhost guest notifier cleanup failed: %d\n", r);
fflush(stderr);
diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
index f205331dcf..f1119cf0ad 100644
--- a/hw/net/virtio-net.c
+++ b/hw/net/virtio-net.c
@@ -285,14 +285,14 @@ static void virtio_net_vhost_status(VirtIONet *n, uint8_t status)
}
n->vhost_started = 1;
- r = vhost_net_start(vdev, n->nic->ncs, queues);
+ r = vhost_net_start(vdev, n->nic->ncs, queues, 0);
if (r < 0) {
error_report("unable to start vhost net: %d: "
"falling back on userspace virtio", -r);
n->vhost_started = 0;
}
} else {
- vhost_net_stop(vdev, n->nic->ncs, queues);
+ vhost_net_stop(vdev, n->nic->ncs, queues, 0);
n->vhost_started = 0;
}
}
diff --git a/include/net/vhost_net.h b/include/net/vhost_net.h
index fba40cf695..387e913e4e 100644
--- a/include/net/vhost_net.h
+++ b/include/net/vhost_net.h
@@ -21,8 +21,10 @@ typedef struct VhostNetOptions {
uint64_t vhost_net_get_max_queues(VHostNetState *net);
struct vhost_net *vhost_net_init(VhostNetOptions *options);
-int vhost_net_start(VirtIODevice *dev, NetClientState *ncs, int total_queues);
-void vhost_net_stop(VirtIODevice *dev, NetClientState *ncs, int total_queues);
+int vhost_net_start(VirtIODevice *dev, NetClientState *ncs,
+ int data_queue_pairs, int cvq);
+void vhost_net_stop(VirtIODevice *dev, NetClientState *ncs,
+ int data_queue_pairs, int cvq);
void vhost_net_cleanup(VHostNetState *net);
--
2.25.1
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH V4 07/10] virtio-net: use "queue_pairs" instead of "queues" when possible
2021-10-11 4:28 [PATCH V4 00/10] vhost-vDPA multiqueue Jason Wang
` (5 preceding siblings ...)
2021-10-11 4:28 ` [PATCH V4 06/10] vhost-net: control virtqueue support Jason Wang
@ 2021-10-11 4:28 ` Jason Wang
2021-10-11 4:28 ` [PATCH V4 08/10] vhost: record the last virtqueue index for the virtio device Jason Wang
` (3 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Jason Wang @ 2021-10-11 4:28 UTC (permalink / raw)
To: mst, jasowang, qemu-devel; +Cc: eperezma, elic, gdawar, lingshan.zhu, lulu
Most of the time, "queues" really means queue pairs. So this patch
switch to use "queue_pairs" to avoid confusion.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210907090322.1756-8-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/net/vhost_net.c | 6 +-
hw/net/virtio-net.c | 150 ++++++++++++++++-----------------
include/hw/virtio/virtio-net.h | 4 +-
3 files changed, 80 insertions(+), 80 deletions(-)
diff --git a/hw/net/vhost_net.c b/hw/net/vhost_net.c
index e1e9d1ec89..2b594b4642 100644
--- a/hw/net/vhost_net.c
+++ b/hw/net/vhost_net.c
@@ -337,7 +337,7 @@ int vhost_net_start(VirtIODevice *dev, NetClientState *ncs,
if (i < data_queue_pairs) {
peer = qemu_get_peer(ncs, i);
} else { /* Control Virtqueue */
- peer = qemu_get_peer(ncs, n->max_queues);
+ peer = qemu_get_peer(ncs, n->max_queue_pairs);
}
net = get_vhost_net(peer);
@@ -362,7 +362,7 @@ int vhost_net_start(VirtIODevice *dev, NetClientState *ncs,
if (i < data_queue_pairs) {
peer = qemu_get_peer(ncs, i);
} else {
- peer = qemu_get_peer(ncs, n->max_queues);
+ peer = qemu_get_peer(ncs, n->max_queue_pairs);
}
r = vhost_net_start_one(get_vhost_net(peer), dev);
@@ -412,7 +412,7 @@ void vhost_net_stop(VirtIODevice *dev, NetClientState *ncs,
if (i < data_queue_pairs) {
peer = qemu_get_peer(ncs, i);
} else {
- peer = qemu_get_peer(ncs, n->max_queues);
+ peer = qemu_get_peer(ncs, n->max_queue_pairs);
}
vhost_net_stop_one(get_vhost_net(peer), dev);
}
diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
index f1119cf0ad..2ade019b22 100644
--- a/hw/net/virtio-net.c
+++ b/hw/net/virtio-net.c
@@ -54,7 +54,7 @@
#define VIRTIO_NET_RX_QUEUE_DEFAULT_SIZE 256
#define VIRTIO_NET_TX_QUEUE_DEFAULT_SIZE 256
-/* for now, only allow larger queues; with virtio-1, guest can downsize */
+/* for now, only allow larger queue_pairs; with virtio-1, guest can downsize */
#define VIRTIO_NET_RX_QUEUE_MIN_SIZE VIRTIO_NET_RX_QUEUE_DEFAULT_SIZE
#define VIRTIO_NET_TX_QUEUE_MIN_SIZE VIRTIO_NET_TX_QUEUE_DEFAULT_SIZE
@@ -131,7 +131,7 @@ static void virtio_net_get_config(VirtIODevice *vdev, uint8_t *config)
int ret = 0;
memset(&netcfg, 0 , sizeof(struct virtio_net_config));
virtio_stw_p(vdev, &netcfg.status, n->status);
- virtio_stw_p(vdev, &netcfg.max_virtqueue_pairs, n->max_queues);
+ virtio_stw_p(vdev, &netcfg.max_virtqueue_pairs, n->max_queue_pairs);
virtio_stw_p(vdev, &netcfg.mtu, n->net_conf.mtu);
memcpy(netcfg.mac, n->mac, ETH_ALEN);
virtio_stl_p(vdev, &netcfg.speed, n->net_conf.speed);
@@ -243,7 +243,7 @@ static void virtio_net_vhost_status(VirtIONet *n, uint8_t status)
{
VirtIODevice *vdev = VIRTIO_DEVICE(n);
NetClientState *nc = qemu_get_queue(n->nic);
- int queues = n->multiqueue ? n->max_queues : 1;
+ int queue_pairs = n->multiqueue ? n->max_queue_pairs : 1;
if (!get_vhost_net(nc->peer)) {
return;
@@ -266,7 +266,7 @@ static void virtio_net_vhost_status(VirtIONet *n, uint8_t status)
/* Any packets outstanding? Purge them to avoid touching rings
* when vhost is running.
*/
- for (i = 0; i < queues; i++) {
+ for (i = 0; i < queue_pairs; i++) {
NetClientState *qnc = qemu_get_subqueue(n->nic, i);
/* Purge both directions: TX and RX. */
@@ -285,14 +285,14 @@ static void virtio_net_vhost_status(VirtIONet *n, uint8_t status)
}
n->vhost_started = 1;
- r = vhost_net_start(vdev, n->nic->ncs, queues, 0);
+ r = vhost_net_start(vdev, n->nic->ncs, queue_pairs, 0);
if (r < 0) {
error_report("unable to start vhost net: %d: "
"falling back on userspace virtio", -r);
n->vhost_started = 0;
}
} else {
- vhost_net_stop(vdev, n->nic->ncs, queues, 0);
+ vhost_net_stop(vdev, n->nic->ncs, queue_pairs, 0);
n->vhost_started = 0;
}
}
@@ -309,11 +309,11 @@ static int virtio_net_set_vnet_endian_one(VirtIODevice *vdev,
}
static bool virtio_net_set_vnet_endian(VirtIODevice *vdev, NetClientState *ncs,
- int queues, bool enable)
+ int queue_pairs, bool enable)
{
int i;
- for (i = 0; i < queues; i++) {
+ for (i = 0; i < queue_pairs; i++) {
if (virtio_net_set_vnet_endian_one(vdev, ncs[i].peer, enable) < 0 &&
enable) {
while (--i >= 0) {
@@ -330,7 +330,7 @@ static bool virtio_net_set_vnet_endian(VirtIODevice *vdev, NetClientState *ncs,
static void virtio_net_vnet_endian_status(VirtIONet *n, uint8_t status)
{
VirtIODevice *vdev = VIRTIO_DEVICE(n);
- int queues = n->multiqueue ? n->max_queues : 1;
+ int queue_pairs = n->multiqueue ? n->max_queue_pairs : 1;
if (virtio_net_started(n, status)) {
/* Before using the device, we tell the network backend about the
@@ -339,14 +339,14 @@ static void virtio_net_vnet_endian_status(VirtIONet *n, uint8_t status)
* virtio-net code.
*/
n->needs_vnet_hdr_swap = virtio_net_set_vnet_endian(vdev, n->nic->ncs,
- queues, true);
+ queue_pairs, true);
} else if (virtio_net_started(n, vdev->status)) {
/* After using the device, we need to reset the network backend to
* the default (guest native endianness), otherwise the guest may
* lose network connectivity if it is rebooted into a different
* endianness.
*/
- virtio_net_set_vnet_endian(vdev, n->nic->ncs, queues, false);
+ virtio_net_set_vnet_endian(vdev, n->nic->ncs, queue_pairs, false);
}
}
@@ -368,12 +368,12 @@ static void virtio_net_set_status(struct VirtIODevice *vdev, uint8_t status)
virtio_net_vnet_endian_status(n, status);
virtio_net_vhost_status(n, status);
- for (i = 0; i < n->max_queues; i++) {
+ for (i = 0; i < n->max_queue_pairs; i++) {
NetClientState *ncs = qemu_get_subqueue(n->nic, i);
bool queue_started;
q = &n->vqs[i];
- if ((!n->multiqueue && i != 0) || i >= n->curr_queues) {
+ if ((!n->multiqueue && i != 0) || i >= n->curr_queue_pairs) {
queue_status = 0;
} else {
queue_status = status;
@@ -540,7 +540,7 @@ static void virtio_net_reset(VirtIODevice *vdev)
n->nouni = 0;
n->nobcast = 0;
/* multiqueue is disabled by default */
- n->curr_queues = 1;
+ n->curr_queue_pairs = 1;
timer_del(n->announce_timer.tm);
n->announce_timer.round = 0;
n->status &= ~VIRTIO_NET_S_ANNOUNCE;
@@ -556,7 +556,7 @@ static void virtio_net_reset(VirtIODevice *vdev)
memset(n->vlans, 0, MAX_VLAN >> 3);
/* Flush any async TX */
- for (i = 0; i < n->max_queues; i++) {
+ for (i = 0; i < n->max_queue_pairs; i++) {
NetClientState *nc = qemu_get_subqueue(n->nic, i);
if (nc->peer) {
@@ -610,7 +610,7 @@ static void virtio_net_set_mrg_rx_bufs(VirtIONet *n, int mergeable_rx_bufs,
sizeof(struct virtio_net_hdr);
}
- for (i = 0; i < n->max_queues; i++) {
+ for (i = 0; i < n->max_queue_pairs; i++) {
nc = qemu_get_subqueue(n->nic, i);
if (peer_has_vnet_hdr(n) &&
@@ -655,7 +655,7 @@ static int peer_attach(VirtIONet *n, int index)
return 0;
}
- if (n->max_queues == 1) {
+ if (n->max_queue_pairs == 1) {
return 0;
}
@@ -681,7 +681,7 @@ static int peer_detach(VirtIONet *n, int index)
return tap_disable(nc->peer);
}
-static void virtio_net_set_queues(VirtIONet *n)
+static void virtio_net_set_queue_pairs(VirtIONet *n)
{
int i;
int r;
@@ -690,8 +690,8 @@ static void virtio_net_set_queues(VirtIONet *n)
return;
}
- for (i = 0; i < n->max_queues; i++) {
- if (i < n->curr_queues) {
+ for (i = 0; i < n->max_queue_pairs; i++) {
+ if (i < n->curr_queue_pairs) {
r = peer_attach(n, i);
assert(!r);
} else {
@@ -920,7 +920,7 @@ static void virtio_net_set_features(VirtIODevice *vdev, uint64_t features)
virtio_net_apply_guest_offloads(n);
}
- for (i = 0; i < n->max_queues; i++) {
+ for (i = 0; i < n->max_queue_pairs; i++) {
NetClientState *nc = qemu_get_subqueue(n->nic, i);
if (!get_vhost_net(nc->peer)) {
@@ -1247,7 +1247,7 @@ static uint16_t virtio_net_handle_rss(VirtIONet *n,
VirtIODevice *vdev = VIRTIO_DEVICE(n);
struct virtio_net_rss_config cfg;
size_t s, offset = 0, size_get;
- uint16_t queues, i;
+ uint16_t queue_pairs, i;
struct {
uint16_t us;
uint8_t b;
@@ -1289,7 +1289,7 @@ static uint16_t virtio_net_handle_rss(VirtIONet *n,
}
n->rss_data.default_queue = do_rss ?
virtio_lduw_p(vdev, &cfg.unclassified_queue) : 0;
- if (n->rss_data.default_queue >= n->max_queues) {
+ if (n->rss_data.default_queue >= n->max_queue_pairs) {
err_msg = "Invalid default queue";
err_value = n->rss_data.default_queue;
goto error;
@@ -1318,14 +1318,14 @@ static uint16_t virtio_net_handle_rss(VirtIONet *n,
size_get = sizeof(temp);
s = iov_to_buf(iov, iov_cnt, offset, &temp, size_get);
if (s != size_get) {
- err_msg = "Can't get queues";
+ err_msg = "Can't get queue_pairs";
err_value = (uint32_t)s;
goto error;
}
- queues = do_rss ? virtio_lduw_p(vdev, &temp.us) : n->curr_queues;
- if (queues == 0 || queues > n->max_queues) {
- err_msg = "Invalid number of queues";
- err_value = queues;
+ queue_pairs = do_rss ? virtio_lduw_p(vdev, &temp.us) : n->curr_queue_pairs;
+ if (queue_pairs == 0 || queue_pairs > n->max_queue_pairs) {
+ err_msg = "Invalid number of queue_pairs";
+ err_value = queue_pairs;
goto error;
}
if (temp.b > VIRTIO_NET_RSS_MAX_KEY_SIZE) {
@@ -1340,7 +1340,7 @@ static uint16_t virtio_net_handle_rss(VirtIONet *n,
}
if (!temp.b && !n->rss_data.hash_types) {
virtio_net_disable_rss(n);
- return queues;
+ return queue_pairs;
}
offset += size_get;
size_get = temp.b;
@@ -1373,7 +1373,7 @@ static uint16_t virtio_net_handle_rss(VirtIONet *n,
trace_virtio_net_rss_enable(n->rss_data.hash_types,
n->rss_data.indirections_len,
temp.b);
- return queues;
+ return queue_pairs;
error:
trace_virtio_net_rss_error(err_msg, err_value);
virtio_net_disable_rss(n);
@@ -1384,15 +1384,15 @@ static int virtio_net_handle_mq(VirtIONet *n, uint8_t cmd,
struct iovec *iov, unsigned int iov_cnt)
{
VirtIODevice *vdev = VIRTIO_DEVICE(n);
- uint16_t queues;
+ uint16_t queue_pairs;
virtio_net_disable_rss(n);
if (cmd == VIRTIO_NET_CTRL_MQ_HASH_CONFIG) {
- queues = virtio_net_handle_rss(n, iov, iov_cnt, false);
- return queues ? VIRTIO_NET_OK : VIRTIO_NET_ERR;
+ queue_pairs = virtio_net_handle_rss(n, iov, iov_cnt, false);
+ return queue_pairs ? VIRTIO_NET_OK : VIRTIO_NET_ERR;
}
if (cmd == VIRTIO_NET_CTRL_MQ_RSS_CONFIG) {
- queues = virtio_net_handle_rss(n, iov, iov_cnt, true);
+ queue_pairs = virtio_net_handle_rss(n, iov, iov_cnt, true);
} else if (cmd == VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET) {
struct virtio_net_ctrl_mq mq;
size_t s;
@@ -1403,24 +1403,24 @@ static int virtio_net_handle_mq(VirtIONet *n, uint8_t cmd,
if (s != sizeof(mq)) {
return VIRTIO_NET_ERR;
}
- queues = virtio_lduw_p(vdev, &mq.virtqueue_pairs);
+ queue_pairs = virtio_lduw_p(vdev, &mq.virtqueue_pairs);
} else {
return VIRTIO_NET_ERR;
}
- if (queues < VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN ||
- queues > VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX ||
- queues > n->max_queues ||
+ if (queue_pairs < VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN ||
+ queue_pairs > VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX ||
+ queue_pairs > n->max_queue_pairs ||
!n->multiqueue) {
return VIRTIO_NET_ERR;
}
- n->curr_queues = queues;
- /* stop the backend before changing the number of queues to avoid handling a
+ n->curr_queue_pairs = queue_pairs;
+ /* stop the backend before changing the number of queue_pairs to avoid handling a
* disabled queue */
virtio_net_set_status(vdev, vdev->status);
- virtio_net_set_queues(n);
+ virtio_net_set_queue_pairs(n);
return VIRTIO_NET_OK;
}
@@ -1498,7 +1498,7 @@ static bool virtio_net_can_receive(NetClientState *nc)
return false;
}
- if (nc->queue_index >= n->curr_queues) {
+ if (nc->queue_index >= n->curr_queue_pairs) {
return false;
}
@@ -2778,11 +2778,11 @@ static void virtio_net_del_queue(VirtIONet *n, int index)
virtio_del_queue(vdev, index * 2 + 1);
}
-static void virtio_net_change_num_queues(VirtIONet *n, int new_max_queues)
+static void virtio_net_change_num_queue_pairs(VirtIONet *n, int new_max_queue_pairs)
{
VirtIODevice *vdev = VIRTIO_DEVICE(n);
int old_num_queues = virtio_get_num_queues(vdev);
- int new_num_queues = new_max_queues * 2 + 1;
+ int new_num_queues = new_max_queue_pairs * 2 + 1;
int i;
assert(old_num_queues >= 3);
@@ -2815,12 +2815,12 @@ static void virtio_net_change_num_queues(VirtIONet *n, int new_max_queues)
static void virtio_net_set_multiqueue(VirtIONet *n, int multiqueue)
{
- int max = multiqueue ? n->max_queues : 1;
+ int max = multiqueue ? n->max_queue_pairs : 1;
n->multiqueue = multiqueue;
- virtio_net_change_num_queues(n, max);
+ virtio_net_change_num_queue_pairs(n, max);
- virtio_net_set_queues(n);
+ virtio_net_set_queue_pairs(n);
}
static int virtio_net_post_load_device(void *opaque, int version_id)
@@ -2853,7 +2853,7 @@ static int virtio_net_post_load_device(void *opaque, int version_id)
*/
n->saved_guest_offloads = n->curr_guest_offloads;
- virtio_net_set_queues(n);
+ virtio_net_set_queue_pairs(n);
/* Find the first multicast entry in the saved MAC filter */
for (i = 0; i < n->mac_table.in_use; i++) {
@@ -2866,7 +2866,7 @@ static int virtio_net_post_load_device(void *opaque, int version_id)
/* nc.link_down can't be migrated, so infer link_down according
* to link status bit in n->status */
link_down = (n->status & VIRTIO_NET_S_LINK_UP) == 0;
- for (i = 0; i < n->max_queues; i++) {
+ for (i = 0; i < n->max_queue_pairs; i++) {
qemu_get_subqueue(n->nic, i)->link_down = link_down;
}
@@ -2931,9 +2931,9 @@ static const VMStateDescription vmstate_virtio_net_queue_tx_waiting = {
},
};
-static bool max_queues_gt_1(void *opaque, int version_id)
+static bool max_queue_pairs_gt_1(void *opaque, int version_id)
{
- return VIRTIO_NET(opaque)->max_queues > 1;
+ return VIRTIO_NET(opaque)->max_queue_pairs > 1;
}
static bool has_ctrl_guest_offloads(void *opaque, int version_id)
@@ -2958,13 +2958,13 @@ static bool mac_table_doesnt_fit(void *opaque, int version_id)
struct VirtIONetMigTmp {
VirtIONet *parent;
VirtIONetQueue *vqs_1;
- uint16_t curr_queues_1;
+ uint16_t curr_queue_pairs_1;
uint8_t has_ufo;
uint32_t has_vnet_hdr;
};
/* The 2nd and subsequent tx_waiting flags are loaded later than
- * the 1st entry in the queues and only if there's more than one
+ * the 1st entry in the queue_pairs and only if there's more than one
* entry. We use the tmp mechanism to calculate a temporary
* pointer and count and also validate the count.
*/
@@ -2974,9 +2974,9 @@ static int virtio_net_tx_waiting_pre_save(void *opaque)
struct VirtIONetMigTmp *tmp = opaque;
tmp->vqs_1 = tmp->parent->vqs + 1;
- tmp->curr_queues_1 = tmp->parent->curr_queues - 1;
- if (tmp->parent->curr_queues == 0) {
- tmp->curr_queues_1 = 0;
+ tmp->curr_queue_pairs_1 = tmp->parent->curr_queue_pairs - 1;
+ if (tmp->parent->curr_queue_pairs == 0) {
+ tmp->curr_queue_pairs_1 = 0;
}
return 0;
@@ -2989,9 +2989,9 @@ static int virtio_net_tx_waiting_pre_load(void *opaque)
/* Reuse the pointer setup from save */
virtio_net_tx_waiting_pre_save(opaque);
- if (tmp->parent->curr_queues > tmp->parent->max_queues) {
- error_report("virtio-net: curr_queues %x > max_queues %x",
- tmp->parent->curr_queues, tmp->parent->max_queues);
+ if (tmp->parent->curr_queue_pairs > tmp->parent->max_queue_pairs) {
+ error_report("virtio-net: curr_queue_pairs %x > max_queue_pairs %x",
+ tmp->parent->curr_queue_pairs, tmp->parent->max_queue_pairs);
return -EINVAL;
}
@@ -3005,7 +3005,7 @@ static const VMStateDescription vmstate_virtio_net_tx_waiting = {
.pre_save = virtio_net_tx_waiting_pre_save,
.fields = (VMStateField[]) {
VMSTATE_STRUCT_VARRAY_POINTER_UINT16(vqs_1, struct VirtIONetMigTmp,
- curr_queues_1,
+ curr_queue_pairs_1,
vmstate_virtio_net_queue_tx_waiting,
struct VirtIONetQueue),
VMSTATE_END_OF_LIST()
@@ -3147,9 +3147,9 @@ static const VMStateDescription vmstate_virtio_net_device = {
VMSTATE_UINT8(nobcast, VirtIONet),
VMSTATE_WITH_TMP(VirtIONet, struct VirtIONetMigTmp,
vmstate_virtio_net_has_ufo),
- VMSTATE_SINGLE_TEST(max_queues, VirtIONet, max_queues_gt_1, 0,
+ VMSTATE_SINGLE_TEST(max_queue_pairs, VirtIONet, max_queue_pairs_gt_1, 0,
vmstate_info_uint16_equal, uint16_t),
- VMSTATE_UINT16_TEST(curr_queues, VirtIONet, max_queues_gt_1),
+ VMSTATE_UINT16_TEST(curr_queue_pairs, VirtIONet, max_queue_pairs_gt_1),
VMSTATE_WITH_TMP(VirtIONet, struct VirtIONetMigTmp,
vmstate_virtio_net_tx_waiting),
VMSTATE_UINT64_TEST(curr_guest_offloads, VirtIONet,
@@ -3393,16 +3393,16 @@ static void virtio_net_device_realize(DeviceState *dev, Error **errp)
return;
}
- n->max_queues = MAX(n->nic_conf.peers.queues, 1);
- if (n->max_queues * 2 + 1 > VIRTIO_QUEUE_MAX) {
- error_setg(errp, "Invalid number of queues (= %" PRIu32 "), "
+ n->max_queue_pairs = MAX(n->nic_conf.peers.queues, 1);
+ if (n->max_queue_pairs * 2 + 1 > VIRTIO_QUEUE_MAX) {
+ error_setg(errp, "Invalid number of queue_pairs (= %" PRIu32 "), "
"must be a positive integer less than %d.",
- n->max_queues, (VIRTIO_QUEUE_MAX - 1) / 2);
+ n->max_queue_pairs, (VIRTIO_QUEUE_MAX - 1) / 2);
virtio_cleanup(vdev);
return;
}
- n->vqs = g_malloc0(sizeof(VirtIONetQueue) * n->max_queues);
- n->curr_queues = 1;
+ n->vqs = g_malloc0(sizeof(VirtIONetQueue) * n->max_queue_pairs);
+ n->curr_queue_pairs = 1;
n->tx_timeout = n->net_conf.txtimer;
if (n->net_conf.tx && strcmp(n->net_conf.tx, "timer")
@@ -3416,7 +3416,7 @@ static void virtio_net_device_realize(DeviceState *dev, Error **errp)
n->net_conf.tx_queue_size = MIN(virtio_net_max_tx_queue_size(n),
n->net_conf.tx_queue_size);
- for (i = 0; i < n->max_queues; i++) {
+ for (i = 0; i < n->max_queue_pairs; i++) {
virtio_net_add_queue(n, i);
}
@@ -3440,13 +3440,13 @@ static void virtio_net_device_realize(DeviceState *dev, Error **errp)
object_get_typename(OBJECT(dev)), dev->id, n);
}
- for (i = 0; i < n->max_queues; i++) {
+ for (i = 0; i < n->max_queue_pairs; i++) {
n->nic->ncs[i].do_not_pad = true;
}
peer_test_vnet_hdr(n);
if (peer_has_vnet_hdr(n)) {
- for (i = 0; i < n->max_queues; i++) {
+ for (i = 0; i < n->max_queue_pairs; i++) {
qemu_using_vnet_hdr(qemu_get_subqueue(n->nic, i)->peer, true);
}
n->host_hdr_len = sizeof(struct virtio_net_hdr);
@@ -3488,7 +3488,7 @@ static void virtio_net_device_unrealize(DeviceState *dev)
{
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
VirtIONet *n = VIRTIO_NET(dev);
- int i, max_queues;
+ int i, max_queue_pairs;
if (virtio_has_feature(n->host_features, VIRTIO_NET_F_RSS)) {
virtio_net_unload_ebpf(n);
@@ -3510,12 +3510,12 @@ static void virtio_net_device_unrealize(DeviceState *dev)
remove_migration_state_change_notifier(&n->migration_state);
}
- max_queues = n->multiqueue ? n->max_queues : 1;
- for (i = 0; i < max_queues; i++) {
+ max_queue_pairs = n->multiqueue ? n->max_queue_pairs : 1;
+ for (i = 0; i < max_queue_pairs; i++) {
virtio_net_del_queue(n, i);
}
/* delete also control vq */
- virtio_del_queue(vdev, max_queues * 2);
+ virtio_del_queue(vdev, max_queue_pairs * 2);
qemu_announce_timer_del(&n->announce_timer, false);
g_free(n->vqs);
qemu_del_nic(n->nic);
diff --git a/include/hw/virtio/virtio-net.h b/include/hw/virtio/virtio-net.h
index 824a69c23f..71cbdc26d7 100644
--- a/include/hw/virtio/virtio-net.h
+++ b/include/hw/virtio/virtio-net.h
@@ -194,8 +194,8 @@ struct VirtIONet {
NICConf nic_conf;
DeviceState *qdev;
int multiqueue;
- uint16_t max_queues;
- uint16_t curr_queues;
+ uint16_t max_queue_pairs;
+ uint16_t curr_queue_pairs;
size_t config_size;
char *netclient_name;
char *netclient_type;
--
2.25.1
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH V4 08/10] vhost: record the last virtqueue index for the virtio device
2021-10-11 4:28 [PATCH V4 00/10] vhost-vDPA multiqueue Jason Wang
` (6 preceding siblings ...)
2021-10-11 4:28 ` [PATCH V4 07/10] virtio-net: use "queue_pairs" instead of "queues" when possible Jason Wang
@ 2021-10-11 4:28 ` Jason Wang
2021-10-11 4:28 ` [PATCH V4 09/10] virtio-net: vhost control virtqueue support Jason Wang
` (2 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Jason Wang @ 2021-10-11 4:28 UTC (permalink / raw)
To: mst, jasowang, qemu-devel; +Cc: eperezma, elic, gdawar, lingshan.zhu, lulu
This patch introduces a new field in the vhost_dev structure to record
the last virtqueue index for the virtio device. This will be useful
for the vhost backends with 1:N model to start or stop the device
after all the vhost_dev structures were started or stopped.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210907090322.1756-9-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/net/vhost_net.c | 12 +++++++++---
include/hw/virtio/vhost.h | 2 ++
2 files changed, 11 insertions(+), 3 deletions(-)
diff --git a/hw/net/vhost_net.c b/hw/net/vhost_net.c
index 2b594b4642..3aabab06ea 100644
--- a/hw/net/vhost_net.c
+++ b/hw/net/vhost_net.c
@@ -231,9 +231,11 @@ fail:
return NULL;
}
-static void vhost_net_set_vq_index(struct vhost_net *net, int vq_index)
+static void vhost_net_set_vq_index(struct vhost_net *net, int vq_index,
+ int last_index)
{
net->dev.vq_index = vq_index;
+ net->dev.last_index = last_index;
}
static int vhost_net_start_one(struct vhost_net *net,
@@ -324,9 +326,13 @@ int vhost_net_start(VirtIODevice *dev, NetClientState *ncs,
VirtIONet *n = VIRTIO_NET(dev);
int nvhosts = data_queue_pairs + cvq;
struct vhost_net *net;
- int r, e, i;
+ int r, e, i, last_index = data_qps * 2;
NetClientState *peer;
+ if (!cvq) {
+ last_index -= 1;
+ }
+
if (!k->set_guest_notifiers) {
error_report("binding does not support guest notifiers");
return -ENOSYS;
@@ -341,7 +347,7 @@ int vhost_net_start(VirtIODevice *dev, NetClientState *ncs,
}
net = get_vhost_net(peer);
- vhost_net_set_vq_index(net, i * 2);
+ vhost_net_set_vq_index(net, i * 2, last_index);
/* Suppress the masking guest notifiers on vhost user
* because vhost user doesn't interrupt masking/unmasking
diff --git a/include/hw/virtio/vhost.h b/include/hw/virtio/vhost.h
index 1a9fc65089..3fa0b554ef 100644
--- a/include/hw/virtio/vhost.h
+++ b/include/hw/virtio/vhost.h
@@ -74,6 +74,8 @@ struct vhost_dev {
unsigned int nvqs;
/* the first virtqueue which would be used by this vhost dev */
int vq_index;
+ /* the last vq index for the virtio device (not vhost) */
+ int last_index;
/* if non-zero, minimum required value for max_queues */
int num_queues;
uint64_t features;
--
2.25.1
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH V4 09/10] virtio-net: vhost control virtqueue support
2021-10-11 4:28 [PATCH V4 00/10] vhost-vDPA multiqueue Jason Wang
` (7 preceding siblings ...)
2021-10-11 4:28 ` [PATCH V4 08/10] vhost: record the last virtqueue index for the virtio device Jason Wang
@ 2021-10-11 4:28 ` Jason Wang
2021-10-11 4:28 ` [PATCH V4 10/10] vhost-vdpa: multiqueue support Jason Wang
2021-10-19 7:21 ` [PATCH V4 00/10] vhost-vDPA multiqueue Michael S. Tsirkin
10 siblings, 0 replies; 17+ messages in thread
From: Jason Wang @ 2021-10-11 4:28 UTC (permalink / raw)
To: mst, jasowang, qemu-devel; +Cc: eperezma, elic, gdawar, lingshan.zhu, lulu
This patch implements the control virtqueue support for vhost. This
requires virtio-net to figure out the datapath queue pairs and control
virtqueue via is_datapath and pass the number of those two types
of virtqueues to vhost_net_start()/vhost_net_stop().
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210907090322.1756-10-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/net/vhost_net.c | 2 +-
hw/net/virtio-net.c | 23 +++++++++++++++++++----
include/hw/virtio/virtio-net.h | 1 +
3 files changed, 21 insertions(+), 5 deletions(-)
diff --git a/hw/net/vhost_net.c b/hw/net/vhost_net.c
index 3aabab06ea..0d888f29a6 100644
--- a/hw/net/vhost_net.c
+++ b/hw/net/vhost_net.c
@@ -326,7 +326,7 @@ int vhost_net_start(VirtIODevice *dev, NetClientState *ncs,
VirtIONet *n = VIRTIO_NET(dev);
int nvhosts = data_queue_pairs + cvq;
struct vhost_net *net;
- int r, e, i, last_index = data_qps * 2;
+ int r, e, i, last_index = data_queue_pairs * 2;
NetClientState *peer;
if (!cvq) {
diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
index 2ade019b22..57a0cbc6cd 100644
--- a/hw/net/virtio-net.c
+++ b/hw/net/virtio-net.c
@@ -244,6 +244,7 @@ static void virtio_net_vhost_status(VirtIONet *n, uint8_t status)
VirtIODevice *vdev = VIRTIO_DEVICE(n);
NetClientState *nc = qemu_get_queue(n->nic);
int queue_pairs = n->multiqueue ? n->max_queue_pairs : 1;
+ int cvq = n->max_ncs - n->max_queue_pairs;
if (!get_vhost_net(nc->peer)) {
return;
@@ -285,14 +286,14 @@ static void virtio_net_vhost_status(VirtIONet *n, uint8_t status)
}
n->vhost_started = 1;
- r = vhost_net_start(vdev, n->nic->ncs, queue_pairs, 0);
+ r = vhost_net_start(vdev, n->nic->ncs, queue_pairs, cvq);
if (r < 0) {
error_report("unable to start vhost net: %d: "
"falling back on userspace virtio", -r);
n->vhost_started = 0;
}
} else {
- vhost_net_stop(vdev, n->nic->ncs, queue_pairs, 0);
+ vhost_net_stop(vdev, n->nic->ncs, queue_pairs, cvq);
n->vhost_started = 0;
}
}
@@ -3393,9 +3394,23 @@ static void virtio_net_device_realize(DeviceState *dev, Error **errp)
return;
}
- n->max_queue_pairs = MAX(n->nic_conf.peers.queues, 1);
+ n->max_ncs = MAX(n->nic_conf.peers.queues, 1);
+
+ /*
+ * Figure out the datapath queue pairs since the backend could
+ * provide control queue via peers as well.
+ */
+ if (n->nic_conf.peers.queues) {
+ for (i = 0; i < n->max_ncs; i++) {
+ if (n->nic_conf.peers.ncs[i]->is_datapath) {
+ ++n->max_queue_pairs;
+ }
+ }
+ }
+ n->max_queue_pairs = MAX(n->max_queue_pairs, 1);
+
if (n->max_queue_pairs * 2 + 1 > VIRTIO_QUEUE_MAX) {
- error_setg(errp, "Invalid number of queue_pairs (= %" PRIu32 "), "
+ error_setg(errp, "Invalid number of queue pairs (= %" PRIu32 "), "
"must be a positive integer less than %d.",
n->max_queue_pairs, (VIRTIO_QUEUE_MAX - 1) / 2);
virtio_cleanup(vdev);
diff --git a/include/hw/virtio/virtio-net.h b/include/hw/virtio/virtio-net.h
index 71cbdc26d7..08ee6dea39 100644
--- a/include/hw/virtio/virtio-net.h
+++ b/include/hw/virtio/virtio-net.h
@@ -196,6 +196,7 @@ struct VirtIONet {
int multiqueue;
uint16_t max_queue_pairs;
uint16_t curr_queue_pairs;
+ uint16_t max_ncs;
size_t config_size;
char *netclient_name;
char *netclient_type;
--
2.25.1
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH V4 10/10] vhost-vdpa: multiqueue support
2021-10-11 4:28 [PATCH V4 00/10] vhost-vDPA multiqueue Jason Wang
` (8 preceding siblings ...)
2021-10-11 4:28 ` [PATCH V4 09/10] virtio-net: vhost control virtqueue support Jason Wang
@ 2021-10-11 4:28 ` Jason Wang
2021-10-19 7:21 ` [PATCH V4 00/10] vhost-vDPA multiqueue Michael S. Tsirkin
10 siblings, 0 replies; 17+ messages in thread
From: Jason Wang @ 2021-10-11 4:28 UTC (permalink / raw)
To: mst, jasowang, qemu-devel; +Cc: eperezma, elic, gdawar, lingshan.zhu, lulu
This patch implements the multiqueue support for vhost-vdpa. This is
done simply by reading the number of queue pairs from the config space
and initialize the datapath and control path net client.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210907090322.1756-11-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/virtio/vhost-vdpa.c | 2 +-
net/vhost-vdpa.c | 105 +++++++++++++++++++++++++++++++++++++----
2 files changed, 97 insertions(+), 10 deletions(-)
diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c
index 8587d30918..f9acfe9bdb 100644
--- a/hw/virtio/vhost-vdpa.c
+++ b/hw/virtio/vhost-vdpa.c
@@ -590,7 +590,7 @@ static int vhost_vdpa_dev_start(struct vhost_dev *dev, bool started)
vhost_vdpa_host_notifiers_uninit(dev, dev->nvqs);
}
- if (vhost_vdpa_one_time_request(dev)) {
+ if (dev->vq_index + dev->nvqs != dev->last_index) {
return 0;
}
diff --git a/net/vhost-vdpa.c b/net/vhost-vdpa.c
index 834dab28dd..533b15ae8c 100644
--- a/net/vhost-vdpa.c
+++ b/net/vhost-vdpa.c
@@ -18,6 +18,7 @@
#include "qemu/error-report.h"
#include "qemu/option.h"
#include "qapi/error.h"
+#include <linux/vhost.h>
#include <sys/ioctl.h>
#include <err.h>
#include "standard-headers/linux/virtio_net.h"
@@ -51,6 +52,14 @@ const int vdpa_feature_bits[] = {
VIRTIO_NET_F_HOST_UFO,
VIRTIO_NET_F_MRG_RXBUF,
VIRTIO_NET_F_MTU,
+ VIRTIO_NET_F_CTRL_RX,
+ VIRTIO_NET_F_CTRL_RX_EXTRA,
+ VIRTIO_NET_F_CTRL_VLAN,
+ VIRTIO_NET_F_GUEST_ANNOUNCE,
+ VIRTIO_NET_F_CTRL_MAC_ADDR,
+ VIRTIO_NET_F_RSS,
+ VIRTIO_NET_F_MQ,
+ VIRTIO_NET_F_CTRL_VQ,
VIRTIO_F_IOMMU_PLATFORM,
VIRTIO_F_RING_PACKED,
VIRTIO_NET_F_RSS,
@@ -81,7 +90,8 @@ static int vhost_vdpa_net_check_device_id(struct vhost_net *net)
return ret;
}
-static int vhost_vdpa_add(NetClientState *ncs, void *be)
+static int vhost_vdpa_add(NetClientState *ncs, void *be,
+ int queue_pair_index, int nvqs)
{
VhostNetOptions options;
struct vhost_net *net = NULL;
@@ -94,7 +104,7 @@ static int vhost_vdpa_add(NetClientState *ncs, void *be)
options.net_backend = ncs;
options.opaque = be;
options.busyloop_timeout = 0;
- options.nvqs = 2;
+ options.nvqs = nvqs;
net = vhost_net_init(&options);
if (!net) {
@@ -158,18 +168,28 @@ static NetClientInfo net_vhost_vdpa_info = {
static NetClientState *net_vhost_vdpa_init(NetClientState *peer,
const char *device,
const char *name,
- int vdpa_device_fd)
+ int vdpa_device_fd,
+ int queue_pair_index,
+ int nvqs,
+ bool is_datapath)
{
NetClientState *nc = NULL;
VhostVDPAState *s;
int ret = 0;
assert(name);
- nc = qemu_new_net_client(&net_vhost_vdpa_info, peer, device, name);
+ if (is_datapath) {
+ nc = qemu_new_net_client(&net_vhost_vdpa_info, peer, device,
+ name);
+ } else {
+ nc = qemu_new_net_control_client(&net_vhost_vdpa_info, peer,
+ device, name);
+ }
snprintf(nc->info_str, sizeof(nc->info_str), TYPE_VHOST_VDPA);
s = DO_UPCAST(VhostVDPAState, nc, nc);
s->vhost_vdpa.device_fd = vdpa_device_fd;
- ret = vhost_vdpa_add(nc, (void *)&s->vhost_vdpa);
+ s->vhost_vdpa.index = queue_pair_index;
+ ret = vhost_vdpa_add(nc, (void *)&s->vhost_vdpa, queue_pair_index, nvqs);
if (ret) {
qemu_del_net_client(nc);
return NULL;
@@ -195,12 +215,52 @@ static int net_vhost_check_net(void *opaque, QemuOpts *opts, Error **errp)
return 0;
}
+static int vhost_vdpa_get_max_queue_pairs(int fd, int *has_cvq, Error **errp)
+{
+ unsigned long config_size = offsetof(struct vhost_vdpa_config, buf);
+ struct vhost_vdpa_config *config;
+ __virtio16 *max_queue_pairs;
+ uint64_t features;
+ int ret;
+
+ ret = ioctl(fd, VHOST_GET_FEATURES, &features);
+ if (ret) {
+ error_setg(errp, "Fail to query features from vhost-vDPA device");
+ return ret;
+ }
+
+ if (features & (1 << VIRTIO_NET_F_CTRL_VQ)) {
+ *has_cvq = 1;
+ } else {
+ *has_cvq = 0;
+ }
+
+ if (features & (1 << VIRTIO_NET_F_MQ)) {
+ config = g_malloc0(config_size + sizeof(*max_queue_pairs));
+ config->off = offsetof(struct virtio_net_config, max_virtqueue_pairs);
+ config->len = sizeof(*max_queue_pairs);
+
+ ret = ioctl(fd, VHOST_VDPA_GET_CONFIG, config);
+ if (ret) {
+ error_setg(errp, "Fail to get config from vhost-vDPA device");
+ return -ret;
+ }
+
+ max_queue_pairs = (__virtio16 *)&config->buf;
+
+ return lduw_le_p(max_queue_pairs);
+ }
+
+ return 1;
+}
+
int net_init_vhost_vdpa(const Netdev *netdev, const char *name,
NetClientState *peer, Error **errp)
{
const NetdevVhostVDPAOptions *opts;
int vdpa_device_fd;
- NetClientState *nc;
+ NetClientState **ncs, *nc;
+ int queue_pairs, i, has_cvq = 0;
assert(netdev->type == NET_CLIENT_DRIVER_VHOST_VDPA);
opts = &netdev->u.vhost_vdpa;
@@ -215,11 +275,38 @@ int net_init_vhost_vdpa(const Netdev *netdev, const char *name,
return -errno;
}
- nc = net_vhost_vdpa_init(peer, TYPE_VHOST_VDPA, name, vdpa_device_fd);
- if (!nc) {
+ queue_pairs = vhost_vdpa_get_max_queue_pairs(vdpa_device_fd,
+ &has_cvq, errp);
+ if (queue_pairs < 0) {
qemu_close(vdpa_device_fd);
- return -1;
+ return queue_pairs;
+ }
+
+ ncs = g_malloc0(sizeof(*ncs) * queue_pairs);
+
+ for (i = 0; i < queue_pairs; i++) {
+ ncs[i] = net_vhost_vdpa_init(peer, TYPE_VHOST_VDPA, name,
+ vdpa_device_fd, i, 2, true);
+ if (!ncs[i])
+ goto err;
+ }
+
+ if (has_cvq) {
+ nc = net_vhost_vdpa_init(peer, TYPE_VHOST_VDPA, name,
+ vdpa_device_fd, i, 1, false);
+ if (!nc)
+ goto err;
}
+ g_free(ncs);
return 0;
+
+err:
+ if (i) {
+ qemu_del_net_client(ncs[0]);
+ }
+ qemu_close(vdpa_device_fd);
+ g_free(ncs);
+
+ return -1;
}
--
2.25.1
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH V4 00/10] vhost-vDPA multiqueue
2021-10-11 4:28 [PATCH V4 00/10] vhost-vDPA multiqueue Jason Wang
` (9 preceding siblings ...)
2021-10-11 4:28 ` [PATCH V4 10/10] vhost-vdpa: multiqueue support Jason Wang
@ 2021-10-19 7:21 ` Michael S. Tsirkin
2021-10-19 7:24 ` Jason Wang
10 siblings, 1 reply; 17+ messages in thread
From: Michael S. Tsirkin @ 2021-10-19 7:21 UTC (permalink / raw)
To: Jason Wang; +Cc: lulu, qemu-devel, gdawar, eperezma, elic, lingshan.zhu
On Mon, Oct 11, 2021 at 12:28:19PM +0800, Jason Wang wrote:
> Hi All:
>
> This patch implements the multiqueue support for vhost-vDPA. The most
> important requirement si the control virtqueue support. The virtio-net
> and vhost-net core are tweak to support control virtqueue as if what
> data queue pairs are done: a dedicated vhost_net device which is
> coupled with the NetClientState is intrdouced so most of the existing
> vhost codes could be reused with minor changes. This means the control
> virtqueue will bypass the Qemu. With the control virtqueue, vhost-vDPA
> are extend to support creating and destroying multiqueue queue pairs
> plus the control virtqueue.
>
> For the future, if we want to support live migration, we can either do
> shadow cvq on top or introduce new interfaces for reporting device
> states.
I had to defer this due to rework I picked up.
I pushed an experimental tree - it still has issues but
if you rebase on top of that I can apply.
> Tests are done via the vp_vdpa driver in L1 guest.
>
> Changes since V3:
>
> - fix build with vhost disabled
>
> Changes since V2:
>
> - rebase to qemu master
> - use "queue_pairs" instead of "qps"
> - typo fixes
>
> Changes since V1:
>
> - start and stop vhost devices when all queues were setup
> - fix the case when driver doesn't support MQ but device support
> - correctly set the batching capability to avoid a map/unmap storm
> - various other tweaks
>
> Jason Wang (10):
> vhost-vdpa: open device fd in net_init_vhost_vdpa()
> vhost-vdpa: classify one time request
> vhost-vdpa: prepare for the multiqueue support
> vhost-vdpa: let net_vhost_vdpa_init() returns NetClientState *
> net: introduce control client
> vhost-net: control virtqueue support
> virtio-net: use "queue_pairs" instead of "queues" when possible
> vhost: record the last virtqueue index for the virtio device
> virtio-net: vhost control virtqueue support
> vhost-vdpa: multiqueue support
>
> hw/net/vhost_net-stub.c | 4 +-
> hw/net/vhost_net.c | 55 ++++++++---
> hw/net/virtio-net.c | 165 ++++++++++++++++++---------------
> hw/virtio/vhost-vdpa.c | 56 +++++++++--
> include/hw/virtio/vhost-vdpa.h | 1 +
> include/hw/virtio/vhost.h | 2 +
> include/hw/virtio/virtio-net.h | 5 +-
> include/net/net.h | 5 +
> include/net/vhost_net.h | 6 +-
> net/net.c | 24 ++++-
> net/vhost-vdpa.c | 127 ++++++++++++++++++++++---
> 11 files changed, 330 insertions(+), 120 deletions(-)
>
> --
> 2.25.1
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [PATCH V4 00/10] vhost-vDPA multiqueue
2021-10-19 7:21 ` [PATCH V4 00/10] vhost-vDPA multiqueue Michael S. Tsirkin
@ 2021-10-19 7:24 ` Jason Wang
2021-10-19 10:44 ` Michael S. Tsirkin
0 siblings, 1 reply; 17+ messages in thread
From: Jason Wang @ 2021-10-19 7:24 UTC (permalink / raw)
To: Michael S. Tsirkin
Cc: Cindy Lu, qemu-devel, Gautam Dawar, eperezma, Eli Cohen,
Zhu Lingshan
On Tue, Oct 19, 2021 at 3:21 PM Michael S. Tsirkin <mst@redhat.com> wrote:
>
> On Mon, Oct 11, 2021 at 12:28:19PM +0800, Jason Wang wrote:
> > Hi All:
> >
> > This patch implements the multiqueue support for vhost-vDPA. The most
> > important requirement si the control virtqueue support. The virtio-net
> > and vhost-net core are tweak to support control virtqueue as if what
> > data queue pairs are done: a dedicated vhost_net device which is
> > coupled with the NetClientState is intrdouced so most of the existing
> > vhost codes could be reused with minor changes. This means the control
> > virtqueue will bypass the Qemu. With the control virtqueue, vhost-vDPA
> > are extend to support creating and destroying multiqueue queue pairs
> > plus the control virtqueue.
> >
> > For the future, if we want to support live migration, we can either do
> > shadow cvq on top or introduce new interfaces for reporting device
> > states.
>
>
> I had to defer this due to rework I picked up.
> I pushed an experimental tree - it still has issues but
> if you rebase on top of that I can apply.
Will do. For the tree, is it
git://git.kernel.org/pub/scm/virt/kvm/mst/qemu.git next?
Thanks
>
> > Tests are done via the vp_vdpa driver in L1 guest.
> >
> > Changes since V3:
> >
> > - fix build with vhost disabled
> >
> > Changes since V2:
> >
> > - rebase to qemu master
> > - use "queue_pairs" instead of "qps"
> > - typo fixes
> >
> > Changes since V1:
> >
> > - start and stop vhost devices when all queues were setup
> > - fix the case when driver doesn't support MQ but device support
> > - correctly set the batching capability to avoid a map/unmap storm
> > - various other tweaks
> >
> > Jason Wang (10):
> > vhost-vdpa: open device fd in net_init_vhost_vdpa()
> > vhost-vdpa: classify one time request
> > vhost-vdpa: prepare for the multiqueue support
> > vhost-vdpa: let net_vhost_vdpa_init() returns NetClientState *
> > net: introduce control client
> > vhost-net: control virtqueue support
> > virtio-net: use "queue_pairs" instead of "queues" when possible
> > vhost: record the last virtqueue index for the virtio device
> > virtio-net: vhost control virtqueue support
> > vhost-vdpa: multiqueue support
> >
> > hw/net/vhost_net-stub.c | 4 +-
> > hw/net/vhost_net.c | 55 ++++++++---
> > hw/net/virtio-net.c | 165 ++++++++++++++++++---------------
> > hw/virtio/vhost-vdpa.c | 56 +++++++++--
> > include/hw/virtio/vhost-vdpa.h | 1 +
> > include/hw/virtio/vhost.h | 2 +
> > include/hw/virtio/virtio-net.h | 5 +-
> > include/net/net.h | 5 +
> > include/net/vhost_net.h | 6 +-
> > net/net.c | 24 ++++-
> > net/vhost-vdpa.c | 127 ++++++++++++++++++++++---
> > 11 files changed, 330 insertions(+), 120 deletions(-)
> >
> > --
> > 2.25.1
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH V4 00/10] vhost-vDPA multiqueue
2021-10-19 7:24 ` Jason Wang
@ 2021-10-19 10:44 ` Michael S. Tsirkin
2021-10-19 11:17 ` Michael S. Tsirkin
0 siblings, 1 reply; 17+ messages in thread
From: Michael S. Tsirkin @ 2021-10-19 10:44 UTC (permalink / raw)
To: Jason Wang
Cc: Cindy Lu, qemu-devel, Gautam Dawar, eperezma, Eli Cohen,
Zhu Lingshan
On Tue, Oct 19, 2021 at 03:24:36PM +0800, Jason Wang wrote:
> On Tue, Oct 19, 2021 at 3:21 PM Michael S. Tsirkin <mst@redhat.com> wrote:
> >
> > On Mon, Oct 11, 2021 at 12:28:19PM +0800, Jason Wang wrote:
> > > Hi All:
> > >
> > > This patch implements the multiqueue support for vhost-vDPA. The most
> > > important requirement si the control virtqueue support. The virtio-net
> > > and vhost-net core are tweak to support control virtqueue as if what
> > > data queue pairs are done: a dedicated vhost_net device which is
> > > coupled with the NetClientState is intrdouced so most of the existing
> > > vhost codes could be reused with minor changes. This means the control
> > > virtqueue will bypass the Qemu. With the control virtqueue, vhost-vDPA
> > > are extend to support creating and destroying multiqueue queue pairs
> > > plus the control virtqueue.
> > >
> > > For the future, if we want to support live migration, we can either do
> > > shadow cvq on top or introduce new interfaces for reporting device
> > > states.
> >
> >
> > I had to defer this due to rework I picked up.
> > I pushed an experimental tree - it still has issues but
> > if you rebase on top of that I can apply.
>
> Will do. For the tree, is it
> git://git.kernel.org/pub/scm/virt/kvm/mst/qemu.git next?
>
> Thanks
>
pci
> >
> > > Tests are done via the vp_vdpa driver in L1 guest.
> > >
> > > Changes since V3:
> > >
> > > - fix build with vhost disabled
> > >
> > > Changes since V2:
> > >
> > > - rebase to qemu master
> > > - use "queue_pairs" instead of "qps"
> > > - typo fixes
> > >
> > > Changes since V1:
> > >
> > > - start and stop vhost devices when all queues were setup
> > > - fix the case when driver doesn't support MQ but device support
> > > - correctly set the batching capability to avoid a map/unmap storm
> > > - various other tweaks
> > >
> > > Jason Wang (10):
> > > vhost-vdpa: open device fd in net_init_vhost_vdpa()
> > > vhost-vdpa: classify one time request
> > > vhost-vdpa: prepare for the multiqueue support
> > > vhost-vdpa: let net_vhost_vdpa_init() returns NetClientState *
> > > net: introduce control client
> > > vhost-net: control virtqueue support
> > > virtio-net: use "queue_pairs" instead of "queues" when possible
> > > vhost: record the last virtqueue index for the virtio device
> > > virtio-net: vhost control virtqueue support
> > > vhost-vdpa: multiqueue support
> > >
> > > hw/net/vhost_net-stub.c | 4 +-
> > > hw/net/vhost_net.c | 55 ++++++++---
> > > hw/net/virtio-net.c | 165 ++++++++++++++++++---------------
> > > hw/virtio/vhost-vdpa.c | 56 +++++++++--
> > > include/hw/virtio/vhost-vdpa.h | 1 +
> > > include/hw/virtio/vhost.h | 2 +
> > > include/hw/virtio/virtio-net.h | 5 +-
> > > include/net/net.h | 5 +
> > > include/net/vhost_net.h | 6 +-
> > > net/net.c | 24 ++++-
> > > net/vhost-vdpa.c | 127 ++++++++++++++++++++++---
> > > 11 files changed, 330 insertions(+), 120 deletions(-)
> > >
> > > --
> > > 2.25.1
> >
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH V4 00/10] vhost-vDPA multiqueue
2021-10-19 10:44 ` Michael S. Tsirkin
@ 2021-10-19 11:17 ` Michael S. Tsirkin
0 siblings, 0 replies; 17+ messages in thread
From: Michael S. Tsirkin @ 2021-10-19 11:17 UTC (permalink / raw)
To: Jason Wang
Cc: Cindy Lu, qemu-devel, Gautam Dawar, eperezma, Eli Cohen,
Zhu Lingshan
On Tue, Oct 19, 2021 at 06:44:38AM -0400, Michael S. Tsirkin wrote:
> On Tue, Oct 19, 2021 at 03:24:36PM +0800, Jason Wang wrote:
> > On Tue, Oct 19, 2021 at 3:21 PM Michael S. Tsirkin <mst@redhat.com> wrote:
> > >
> > > On Mon, Oct 11, 2021 at 12:28:19PM +0800, Jason Wang wrote:
> > > > Hi All:
> > > >
> > > > This patch implements the multiqueue support for vhost-vDPA. The most
> > > > important requirement si the control virtqueue support. The virtio-net
> > > > and vhost-net core are tweak to support control virtqueue as if what
> > > > data queue pairs are done: a dedicated vhost_net device which is
> > > > coupled with the NetClientState is intrdouced so most of the existing
> > > > vhost codes could be reused with minor changes. This means the control
> > > > virtqueue will bypass the Qemu. With the control virtqueue, vhost-vDPA
> > > > are extend to support creating and destroying multiqueue queue pairs
> > > > plus the control virtqueue.
> > > >
> > > > For the future, if we want to support live migration, we can either do
> > > > shadow cvq on top or introduce new interfaces for reporting device
> > > > states.
> > >
> > >
> > > I had to defer this due to rework I picked up.
> > > I pushed an experimental tree - it still has issues but
> > > if you rebase on top of that I can apply.
> >
> > Will do. For the tree, is it
> > git://git.kernel.org/pub/scm/virt/kvm/mst/qemu.git next?
> >
> > Thanks
> >
>
> pci
pushed now
> > >
> > > > Tests are done via the vp_vdpa driver in L1 guest.
> > > >
> > > > Changes since V3:
> > > >
> > > > - fix build with vhost disabled
> > > >
> > > > Changes since V2:
> > > >
> > > > - rebase to qemu master
> > > > - use "queue_pairs" instead of "qps"
> > > > - typo fixes
> > > >
> > > > Changes since V1:
> > > >
> > > > - start and stop vhost devices when all queues were setup
> > > > - fix the case when driver doesn't support MQ but device support
> > > > - correctly set the batching capability to avoid a map/unmap storm
> > > > - various other tweaks
> > > >
> > > > Jason Wang (10):
> > > > vhost-vdpa: open device fd in net_init_vhost_vdpa()
> > > > vhost-vdpa: classify one time request
> > > > vhost-vdpa: prepare for the multiqueue support
> > > > vhost-vdpa: let net_vhost_vdpa_init() returns NetClientState *
> > > > net: introduce control client
> > > > vhost-net: control virtqueue support
> > > > virtio-net: use "queue_pairs" instead of "queues" when possible
> > > > vhost: record the last virtqueue index for the virtio device
> > > > virtio-net: vhost control virtqueue support
> > > > vhost-vdpa: multiqueue support
> > > >
> > > > hw/net/vhost_net-stub.c | 4 +-
> > > > hw/net/vhost_net.c | 55 ++++++++---
> > > > hw/net/virtio-net.c | 165 ++++++++++++++++++---------------
> > > > hw/virtio/vhost-vdpa.c | 56 +++++++++--
> > > > include/hw/virtio/vhost-vdpa.h | 1 +
> > > > include/hw/virtio/vhost.h | 2 +
> > > > include/hw/virtio/virtio-net.h | 5 +-
> > > > include/net/net.h | 5 +
> > > > include/net/vhost_net.h | 6 +-
> > > > net/net.c | 24 ++++-
> > > > net/vhost-vdpa.c | 127 ++++++++++++++++++++++---
> > > > 11 files changed, 330 insertions(+), 120 deletions(-)
> > > >
> > > > --
> > > > 2.25.1
> > >
^ permalink raw reply [flat|nested] 17+ messages in thread