From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>
Subject: [PATCH v4 45/48] tcg/s390: Support raising sigbus for user-only
Date: Tue, 12 Oct 2021 19:46:04 -0700 [thread overview]
Message-ID: <20211013024607.731881-46-richard.henderson@linaro.org> (raw)
In-Reply-To: <20211013024607.731881-1-richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
tcg/s390x/tcg-target.h | 2 --
tcg/s390x/tcg-target.c.inc | 59 ++++++++++++++++++++++++++++++++++++--
2 files changed, 57 insertions(+), 4 deletions(-)
diff --git a/tcg/s390x/tcg-target.h b/tcg/s390x/tcg-target.h
index 527ada0f63..69217d995b 100644
--- a/tcg/s390x/tcg-target.h
+++ b/tcg/s390x/tcg-target.h
@@ -178,9 +178,7 @@ static inline void tb_target_set_jmp_target(uintptr_t tc_ptr, uintptr_t jmp_rx,
/* no need to flush icache explicitly */
}
-#ifdef CONFIG_SOFTMMU
#define TCG_TARGET_NEED_LDST_LABELS
-#endif
#define TCG_TARGET_NEED_POOL_LABELS
#endif
diff --git a/tcg/s390x/tcg-target.c.inc b/tcg/s390x/tcg-target.c.inc
index 8938c446c8..bc6a13d797 100644
--- a/tcg/s390x/tcg-target.c.inc
+++ b/tcg/s390x/tcg-target.c.inc
@@ -29,6 +29,7 @@
#error "unsupported code generation mode"
#endif
+#include "../tcg-ldst.c.inc"
#include "../tcg-pool.c.inc"
#include "elf.h"
@@ -136,6 +137,7 @@ typedef enum S390Opcode {
RI_OIHL = 0xa509,
RI_OILH = 0xa50a,
RI_OILL = 0xa50b,
+ RI_TMLL = 0xa701,
RIE_CGIJ = 0xec7c,
RIE_CGRJ = 0xec64,
@@ -1804,8 +1806,6 @@ static void tcg_out_qemu_st_direct(TCGContext *s, MemOp opc, TCGReg data,
}
#if defined(CONFIG_SOFTMMU)
-#include "../tcg-ldst.c.inc"
-
/* We're expecting to use a 20-bit negative offset on the tlb memory ops. */
QEMU_BUILD_BUG_ON(TLB_MASK_TABLE_OFS(0) > 0);
QEMU_BUILD_BUG_ON(TLB_MASK_TABLE_OFS(0) < -(1 << 19));
@@ -1942,6 +1942,53 @@ static bool tcg_out_qemu_st_slow_path(TCGContext *s, TCGLabelQemuLdst *lb)
return true;
}
#else
+static void tcg_out_test_alignment(TCGContext *s, bool is_ld,
+ TCGReg addrlo, unsigned a_bits)
+{
+ unsigned a_mask = (1 << a_bits) - 1;
+ TCGLabelQemuLdst *l = new_ldst_label(s);
+
+ l->is_ld = is_ld;
+ l->addrlo_reg = addrlo;
+
+ /* We are expecting a_bits to max out at 7, much lower than TMLL. */
+ tcg_debug_assert(a_bits < 16);
+ tcg_out_insn(s, RI, TMLL, addrlo, a_mask);
+
+ tcg_out16(s, RI_BRC | (7 << 4)); /* CC in {1,2,3} */
+ l->label_ptr[0] = s->code_ptr;
+ s->code_ptr += 1;
+
+ l->raddr = tcg_splitwx_to_rx(s->code_ptr);
+}
+
+static bool tcg_out_fail_alignment(TCGContext *s, TCGLabelQemuLdst *l)
+{
+ if (!patch_reloc(l->label_ptr[0], R_390_PC16DBL,
+ (intptr_t)tcg_splitwx_to_rx(s->code_ptr), 2)) {
+ return false;
+ }
+
+ tcg_out_mov(s, TCG_TYPE_TL, TCG_REG_R3, l->addrlo_reg);
+ tcg_out_mov(s, TCG_TYPE_PTR, TCG_REG_R2, TCG_AREG0);
+
+ /* "Tail call" to the helper, with the return address back inline. */
+ tcg_out_movi(s, TCG_TYPE_PTR, TCG_REG_R14, (uintptr_t)l->raddr);
+ tgen_gotoi(s, S390_CC_ALWAYS, (const void *)(l->is_ld ? helper_unaligned_ld
+ : helper_unaligned_st));
+ return true;
+}
+
+static bool tcg_out_qemu_ld_slow_path(TCGContext *s, TCGLabelQemuLdst *l)
+{
+ return tcg_out_fail_alignment(s, l);
+}
+
+static bool tcg_out_qemu_st_slow_path(TCGContext *s, TCGLabelQemuLdst *l)
+{
+ return tcg_out_fail_alignment(s, l);
+}
+
static void tcg_prepare_user_ldst(TCGContext *s, TCGReg *addr_reg,
TCGReg *index_reg, tcg_target_long *disp)
{
@@ -1980,7 +2027,11 @@ static void tcg_out_qemu_ld(TCGContext* s, TCGReg data_reg, TCGReg addr_reg,
#else
TCGReg index_reg;
tcg_target_long disp;
+ unsigned a_bits = get_alignment_bits(opc);
+ if (a_bits) {
+ tcg_out_test_alignment(s, true, addr_reg, a_bits);
+ }
tcg_prepare_user_ldst(s, &addr_reg, &index_reg, &disp);
tcg_out_qemu_ld_direct(s, opc, data_reg, addr_reg, index_reg, disp);
#endif
@@ -2007,7 +2058,11 @@ static void tcg_out_qemu_st(TCGContext* s, TCGReg data_reg, TCGReg addr_reg,
#else
TCGReg index_reg;
tcg_target_long disp;
+ unsigned a_bits = get_alignment_bits(opc);
+ if (a_bits) {
+ tcg_out_test_alignment(s, false, addr_reg, a_bits);
+ }
tcg_prepare_user_ldst(s, &addr_reg, &index_reg, &disp);
tcg_out_qemu_st_direct(s, opc, data_reg, addr_reg, index_reg, disp);
#endif
--
2.25.1
next prev parent reply other threads:[~2021-10-13 3:23 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-13 2:45 [PATCH v4 00/48] Richard Henderson
2021-10-13 2:45 ` [PATCH v4 01/48] hw/core: Add TCGCPUOps.record_sigbus Richard Henderson
2021-10-13 2:45 ` [PATCH v4 02/48] linux-user: Add cpu_loop_exit_sigbus Richard Henderson
2021-10-13 2:45 ` [PATCH v4 03/48] linux-user/alpha: Remove EXCP_UNALIGN handling Richard Henderson
2021-10-13 2:45 ` [PATCH v4 04/48] target/arm: Implement arm_cpu_record_sigbus Richard Henderson
2021-10-13 2:45 ` [PATCH v4 05/48] linux-user/hppa: Remove EXCP_UNALIGN handling Richard Henderson
2021-10-13 2:45 ` [PATCH v4 06/48] target/microblaze: Do not set MO_ALIGN for user-only Richard Henderson
2021-10-13 2:45 ` [PATCH v4 07/48] target/ppc: Move SPR_DSISR setting to powerpc_excp Richard Henderson
2021-10-13 2:45 ` [PATCH v4 08/48] target/ppc: Set fault address in ppc_cpu_do_unaligned_access Richard Henderson
2021-10-13 2:45 ` [PATCH v4 09/48] target/ppc: Restrict ppc_cpu_do_unaligned_access to sysemu Richard Henderson
2021-10-13 2:54 ` Warner Losh
2021-10-13 2:45 ` [PATCH v4 10/48] target/s390x: Implement s390x_cpu_record_sigbus Richard Henderson
2021-10-13 2:45 ` [PATCH v4 11/48] linux-user/hppa: Remove POWERPC_EXCP_ALIGN handling Richard Henderson
2021-10-13 2:45 ` [PATCH v4 12/48] target/sh4: Set fault address in superh_cpu_do_unaligned_access Richard Henderson
2021-10-13 2:45 ` [PATCH v4 13/48] target/sparc: Remove DEBUG_UNALIGNED Richard Henderson
2021-10-13 2:45 ` [PATCH v4 14/48] target/sparc: Split out build_sfsr Richard Henderson
2021-10-13 2:45 ` [PATCH v4 15/48] target/sparc: Set fault address in sparc_cpu_do_unaligned_access Richard Henderson
2021-10-13 2:45 ` [PATCH v4 16/48] accel/tcg: Report unaligned atomics for user-only Richard Henderson
2021-10-13 2:45 ` [PATCH v4 17/48] target/arm: Use MO_128 for 16 byte atomics Richard Henderson
2021-10-13 2:45 ` [PATCH v4 18/48] target/i386: " Richard Henderson
2021-10-13 2:45 ` [PATCH v4 19/48] target/ppc: " Richard Henderson
2021-10-13 2:45 ` [PATCH v4 20/48] target/s390x: " Richard Henderson
2021-10-13 2:45 ` [PATCH v4 21/48] target/hexagon: Implement cpu_mmu_index Richard Henderson
2021-10-13 2:45 ` [PATCH v4 22/48] accel/tcg: Add cpu_{ld,st}*_mmu interfaces Richard Henderson
2021-10-13 2:45 ` [PATCH v4 23/48] accel/tcg: Move cpu_atomic decls to exec/cpu_ldst.h Richard Henderson
2021-10-13 2:45 ` [PATCH v4 24/48] target/mips: Use cpu_*_data_ra for msa load/store Richard Henderson
2021-10-13 2:45 ` [PATCH v4 25/48] target/mips: Use 8-byte memory ops " Richard Henderson
2021-10-13 2:45 ` [PATCH v4 26/48] target/s390x: Use cpu_*_mmu instead of helper_*_mmu Richard Henderson
2021-10-13 2:45 ` [PATCH v4 27/48] target/sparc: " Richard Henderson
2021-10-13 2:45 ` [PATCH v4 28/48] target/arm: " Richard Henderson
2021-10-13 2:45 ` [PATCH v4 29/48] tcg: Move helper_*_mmu decls to tcg/tcg-ldst.h Richard Henderson
2021-10-13 2:45 ` [PATCH v4 30/48] tcg: Add helper_unaligned_{ld, st} for user-only sigbus Richard Henderson
2021-10-13 2:45 ` [PATCH v4 31/48] linux-user: Split out do_prctl and subroutines Richard Henderson
2021-10-13 2:45 ` [PATCH v4 32/48] linux-user: Disable more prctl subcodes Richard Henderson
2021-10-13 2:45 ` [PATCH v4 33/48] Revert "cpu: Move cpu_common_props to hw/core/cpu.c" Richard Henderson
2021-10-13 2:45 ` [PATCH v4 34/48] linux-user: Add code for PR_GET/SET_UNALIGN Richard Henderson
2021-10-13 2:45 ` [PATCH v4 35/48] target/alpha: Reorg fp memory operations Richard Henderson
2021-10-13 2:45 ` [PATCH v4 36/48] target/alpha: Reorg integer " Richard Henderson
2021-10-13 2:45 ` [PATCH v4 37/48] target/alpha: Implement prctl_unalign_sigbus Richard Henderson
2021-10-13 2:45 ` [PATCH v4 38/48] target/hppa: " Richard Henderson
2021-10-13 2:45 ` [PATCH v4 39/48] target/sh4: " Richard Henderson
2021-10-13 2:45 ` [PATCH v4 40/48] linux-user/signal: Handle BUS_ADRALN in host_signal_handler Richard Henderson
2021-10-13 2:46 ` [PATCH v4 41/48] tcg: Canonicalize alignment flags in MemOp Richard Henderson
2021-10-13 2:46 ` [PATCH v4 42/48] tcg/i386: Support raising sigbus for user-only Richard Henderson
2021-10-13 2:46 ` [PATCH v4 43/48] tcg/aarch64: " Richard Henderson
2021-10-13 2:46 ` [PATCH v4 44/48] tcg/ppc: " Richard Henderson
2021-10-13 2:46 ` Richard Henderson [this message]
2021-10-13 2:46 ` [PATCH v4 46/48] tcg/tci: " Richard Henderson
2021-10-13 2:46 ` [PATCH v4 47/48] tcg/riscv: " Richard Henderson
2021-10-13 2:46 ` [PATCH v4 48/48] tests/tcg/multiarch: Add sigbus.c Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211013024607.731881-46-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).