From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com,
imammedo@redhat.com, mst@redhat.com, philmd@redhat.com,
peter.maydell@linaro.org, shannon.zhaosl@gmail.com,
shameerali.kolothum.thodi@huawei.com, ardb@kernel.org,
jean-philippe@linaro.org, qemu-arm@nongnu.org,
qemu-devel@nongnu.org, drjones@redhat.com
Cc: gshan@redhat.com
Subject: [PATCH v3 2/3] hw/arm/virt-acpi-build: IORT upgrade up to revision E.b
Date: Thu, 14 Oct 2021 13:56:42 +0200 [thread overview]
Message-ID: <20211014115643.756977-3-eric.auger@redhat.com> (raw)
In-Reply-To: <20211014115643.756977-1-eric.auger@redhat.com>
Upgrade the IORT table from B to E.b specification
revision (ARM DEN 0049E.b).
The SMMUv3 and root complex node have additional
fields. Also unique IORT node identifiers are
introduced: they are generated in sequential order.
They are not cross-referenced though.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
---
v2 -> v3:
- added Jean and Igor's R-b
- added comment about node IDs in the commit msg (Igor)
---
hw/arm/virt-acpi-build.c | 48 ++++++++++++++++++++++++----------------
1 file changed, 29 insertions(+), 19 deletions(-)
diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index dd17a48c00e..d3bb4cba3ed 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -241,19 +241,20 @@ static void acpi_dsdt_add_tpm(Aml *scope, VirtMachineState *vms)
#endif
#define ID_MAPPING_ENTRY_SIZE 20
-#define SMMU_V3_ENTRY_SIZE 60
-#define ROOT_COMPLEX_ENTRY_SIZE 32
+#define SMMU_V3_ENTRY_SIZE 68
+#define ROOT_COMPLEX_ENTRY_SIZE 36
#define IORT_NODE_OFFSET 48
static void build_iort_id_mapping(GArray *table_data, uint32_t input_base,
uint32_t id_count, uint32_t out_ref)
{
- /* Identity RID mapping covering the whole input RID range */
+ /* Table 4 ID mapping format */
build_append_int_noprefix(table_data, input_base, 4); /* Input base */
build_append_int_noprefix(table_data, id_count, 4); /* Number of IDs */
build_append_int_noprefix(table_data, input_base, 4); /* Output base */
build_append_int_noprefix(table_data, out_ref, 4); /* Output Reference */
- build_append_int_noprefix(table_data, 0, 4); /* Flags */
+ /* Flags */
+ build_append_int_noprefix(table_data, 0 /* Single mapping (disabled) */, 4);
}
struct AcpiIortIdMapping {
@@ -298,7 +299,7 @@ static int iort_idmap_compare(gconstpointer a, gconstpointer b)
/*
* Input Output Remapping Table (IORT)
* Conforms to "IO Remapping Table System Software on ARM Platforms",
- * Document number: ARM DEN 0049B, October 2015
+ * Document number: ARM DEN 0049E.b, Feb 2021
*/
static void
build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
@@ -307,10 +308,11 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
const uint32_t iort_node_offset = IORT_NODE_OFFSET;
size_t node_size, smmu_offset = 0;
AcpiIortIdMapping *idmap;
+ uint32_t id = 0;
GArray *smmu_idmaps = g_array_new(false, true, sizeof(AcpiIortIdMapping));
GArray *its_idmaps = g_array_new(false, true, sizeof(AcpiIortIdMapping));
- AcpiTable table = { .sig = "IORT", .rev = 0, .oem_id = vms->oem_id,
+ AcpiTable table = { .sig = "IORT", .rev = 3, .oem_id = vms->oem_id,
.oem_table_id = vms->oem_table_id };
/* Table 2 The IORT */
acpi_table_begin(&table, table_data);
@@ -358,12 +360,12 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
build_append_int_noprefix(table_data, IORT_NODE_OFFSET, 4);
build_append_int_noprefix(table_data, 0, 4); /* Reserved */
- /* 3.1.1.3 ITS group node */
+ /* Table 12 ITS Group Format */
build_append_int_noprefix(table_data, 0 /* ITS Group */, 1); /* Type */
node_size = 20 /* fixed header size */ + 4 /* 1 GIC ITS Identifier */;
build_append_int_noprefix(table_data, node_size, 2); /* Length */
- build_append_int_noprefix(table_data, 0, 1); /* Revision */
- build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+ build_append_int_noprefix(table_data, 1, 1); /* Revision */
+ build_append_int_noprefix(table_data, id++, 4); /* Identifier */
build_append_int_noprefix(table_data, 0, 4); /* Number of ID mappings */
build_append_int_noprefix(table_data, 0, 4); /* Reference to ID Array */
build_append_int_noprefix(table_data, 1, 4); /* Number of ITSs */
@@ -374,19 +376,19 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
int irq = vms->irqmap[VIRT_SMMU] + ARM_SPI_BASE;
smmu_offset = table_data->len - table.table_offset;
- /* 3.1.1.2 SMMUv3 */
+ /* Table 9 SMMUv3 Format */
build_append_int_noprefix(table_data, 4 /* SMMUv3 */, 1); /* Type */
node_size = SMMU_V3_ENTRY_SIZE + ID_MAPPING_ENTRY_SIZE;
build_append_int_noprefix(table_data, node_size, 2); /* Length */
- build_append_int_noprefix(table_data, 0, 1); /* Revision */
- build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+ build_append_int_noprefix(table_data, 4, 1); /* Revision */
+ build_append_int_noprefix(table_data, id++, 4); /* Identifier */
build_append_int_noprefix(table_data, 1, 4); /* Number of ID mappings */
/* Reference to ID Array */
build_append_int_noprefix(table_data, SMMU_V3_ENTRY_SIZE, 4);
/* Base address */
build_append_int_noprefix(table_data, vms->memmap[VIRT_SMMU].base, 8);
/* Flags */
- build_append_int_noprefix(table_data, 1 /* COHACC OverrideNote */, 4);
+ build_append_int_noprefix(table_data, 1 /* COHACC Override */, 4);
build_append_int_noprefix(table_data, 0, 4); /* Reserved */
build_append_int_noprefix(table_data, 0, 8); /* VATOS address */
/* Model */
@@ -395,35 +397,43 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
build_append_int_noprefix(table_data, irq + 1, 4); /* PRI */
build_append_int_noprefix(table_data, irq + 3, 4); /* GERR */
build_append_int_noprefix(table_data, irq + 2, 4); /* Sync */
+ build_append_int_noprefix(table_data, 0, 4); /* Proximity domain */
+ /* DeviceID mapping index (ignored since interrupts are GSIV based) */
+ build_append_int_noprefix(table_data, 0, 4);
/* output IORT node is the ITS group node (the first node) */
build_iort_id_mapping(table_data, 0, 0xFFFF, IORT_NODE_OFFSET);
}
- /* Table 16 Root Complex Node */
+ /* Table 17 Root Complex Node */
build_append_int_noprefix(table_data, 2 /* Root complex */, 1); /* Type */
node_size = ROOT_COMPLEX_ENTRY_SIZE +
ID_MAPPING_ENTRY_SIZE * rc_mapping_count;
build_append_int_noprefix(table_data, node_size, 2); /* Length */
- build_append_int_noprefix(table_data, 0, 1); /* Revision */
- build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+ build_append_int_noprefix(table_data, 3, 1); /* Revision */
+ build_append_int_noprefix(table_data, id++, 4); /* Identifier */
/* Number of ID mappings */
build_append_int_noprefix(table_data, rc_mapping_count, 4);
/* Reference to ID Array */
build_append_int_noprefix(table_data, ROOT_COMPLEX_ENTRY_SIZE, 4);
- /* Table 13 Memory access properties */
+ /* Table 14 Memory access properties */
/* CCA: Cache Coherent Attribute */
build_append_int_noprefix(table_data, 1 /* fully coherent */, 4);
build_append_int_noprefix(table_data, 0, 1); /* AH: Note Allocation Hints */
build_append_int_noprefix(table_data, 0, 2); /* Reserved */
- /* MAF: Note Memory Access Flags */
- build_append_int_noprefix(table_data, 0x3 /* CCA = CPM = DCAS = 1 */, 1);
+ /* Table 15 Memory Access Flags */
+ build_append_int_noprefix(table_data, 0x3 /* CCA = CPM = DACS = 1 */, 1);
build_append_int_noprefix(table_data, 0, 4); /* ATS Attribute */
/* MCFG pci_segment */
build_append_int_noprefix(table_data, 0, 4); /* PCI Segment number */
+ /* Memory address size limit */
+ build_append_int_noprefix(table_data, 64, 1);
+
+ build_append_int_noprefix(table_data, 0, 3); /* Reserved */
+
/* Output Reference */
if (vms->iommu == VIRT_IOMMU_SMMUV3) {
AcpiIortIdMapping *range;
--
2.26.3
next prev parent reply other threads:[~2021-10-14 11:59 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-14 11:56 [PATCH v3 0/3] hw/arm/virt_acpi_build: Upgrate the IORT table up to revision E.b Eric Auger
2021-10-14 11:56 ` [PATCH v3 1/3] tests/acpi: Get prepared for IORT E.b revision upgrade Eric Auger
2021-10-14 11:56 ` Eric Auger [this message]
2021-10-14 11:56 ` [PATCH v3 3/3] tests/acpi: Generate reference blob for IORT rev E.b Eric Auger
2021-10-14 12:05 ` [PATCH v3 0/3] hw/arm/virt_acpi_build: Upgrate the IORT table up to revision E.b Michael S. Tsirkin
2021-10-15 0:43 ` Richard Henderson
2021-10-14 12:06 ` Eric Auger
2021-10-15 0:49 ` Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211014115643.756977-3-eric.auger@redhat.com \
--to=eric.auger@redhat.com \
--cc=ardb@kernel.org \
--cc=drjones@redhat.com \
--cc=eric.auger.pro@gmail.com \
--cc=gshan@redhat.com \
--cc=imammedo@redhat.com \
--cc=jean-philippe@linaro.org \
--cc=mst@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@redhat.com \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=shameerali.kolothum.thodi@huawei.com \
--cc=shannon.zhaosl@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).