qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Dr. David Alan Gilbert (git)" <dgilbert@redhat.com>
To: qemu-devel@nongnu.org, eblake@redhat.com, peter.maydell@linaro.org
Cc: mark.cave-ayland@ilande.co.uk, alistair.francis@wdc.com,
	richard.henderson@linaro.org, shorne@gmail.com,
	atar4qemu@gmail.com
Subject: [PATCH] Fix %#08 misuses
Date: Thu, 14 Oct 2021 19:52:45 +0100	[thread overview]
Message-ID: <20211014185245.69803-1-dgilbert@redhat.com> (raw)

From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>

Joe Perches pointed out on lkml [1] that the format special %# (which
adds 0x) is included in the character count, i.e.:

  printf("0: %#08x\n0: %#08x\n", 0xabcdef01,1);
gives:
0: 0xabcdef01
0: 0x000001

rather than padding to the expected 8 data characters.
It looks like we use '%#.8x' in some places and that
seems like it works:

  printf(".: %#.8x\n.: %#.8x\n", 0xabcdef01,1);
.: 0xabcdef01
.: 0x00000001

Replace all the '%#08' cases by '%#.8' ; I've not
attacked the other lengths yet.

Although I'm tempted to think that perhaps we should just
prefer '0x%08' which seems clearer.

(Note I've not managed to test most of these)

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

[1] https://lore.kernel.org/lkml/9499203f1e993872b384aabdec59ac223a8ab931.camel@perches.com/
---
 disas/alpha.c           | 2 +-
 disas/sparc.c           | 2 +-
 hw/arm/omap1.c          | 2 +-
 hw/timer/a9gtimer.c     | 4 ++--
 include/hw/arm/omap.h   | 4 ++--
 softmmu/device_tree.c   | 2 +-
 target/openrisc/disas.c | 2 +-
 7 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/disas/alpha.c b/disas/alpha.c
index 3db90fa665..6da5c473d8 100644
--- a/disas/alpha.c
+++ b/disas/alpha.c
@@ -1851,7 +1851,7 @@ print_insn_alpha (bfd_vma memaddr, struct disassemble_info *info)
     }
 
   /* No instruction found */
-  (*info->fprintf_func) (info->stream, ".long %#08x", insn);
+  (*info->fprintf_func) (info->stream, ".long %#.8x", insn);
 
   return 4;
 
diff --git a/disas/sparc.c b/disas/sparc.c
index 5689533ce1..9f1160ab1c 100644
--- a/disas/sparc.c
+++ b/disas/sparc.c
@@ -3231,6 +3231,6 @@ print_insn_sparc (bfd_vma memaddr, disassemble_info *info)
     }
 
   info->insn_type = dis_noninsn;        /* Mark as non-valid instruction.  */
-  (*info->fprintf_func) (stream, ".long %#08lx", insn);
+  (*info->fprintf_func) (stream, ".long %#.8lx", insn);
   return sizeof (buffer);
 }
diff --git a/hw/arm/omap1.c b/hw/arm/omap1.c
index 180d3788f8..cff8ecb7d6 100644
--- a/hw/arm/omap1.c
+++ b/hw/arm/omap1.c
@@ -42,7 +42,7 @@
 
 static inline void omap_log_badwidth(const char *funcname, hwaddr addr, int sz)
 {
-    qemu_log_mask(LOG_GUEST_ERROR, "%s: %d-bit register %#08" HWADDR_PRIx "\n",
+    qemu_log_mask(LOG_GUEST_ERROR, "%s: %d-bit register %#.8" HWADDR_PRIx "\n",
                   funcname, 8 * sz, addr);
 }
 
diff --git a/hw/timer/a9gtimer.c b/hw/timer/a9gtimer.c
index 7233068a37..c53edd8b44 100644
--- a/hw/timer/a9gtimer.c
+++ b/hw/timer/a9gtimer.c
@@ -169,7 +169,7 @@ static uint64_t a9_gtimer_read(void *opaque, hwaddr addr, unsigned size)
         return 0;
     }
 
-    DB_PRINT("addr:%#x data:%#08" PRIx64 "\n", (unsigned)addr, ret);
+    DB_PRINT("addr:%#x data:%#.8" PRIx64 "\n", (unsigned)addr, ret);
     return ret;
 }
 
@@ -180,7 +180,7 @@ static void a9_gtimer_write(void *opaque, hwaddr addr, uint64_t value,
     A9GTimerState *s = gtb->parent;
     int shift = 0;
 
-    DB_PRINT("addr:%#x data:%#08" PRIx64 "\n", (unsigned)addr, value);
+    DB_PRINT("addr:%#x data:%#.8" PRIx64 "\n", (unsigned)addr, value);
 
     switch (addr) {
     case R_COUNTER_HI:
diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h
index ff6a173f8a..47616bbba3 100644
--- a/include/hw/arm/omap.h
+++ b/include/hw/arm/omap.h
@@ -1003,10 +1003,10 @@ void omap_badwidth_write32(void *opaque, hwaddr addr,
 void omap_mpu_wakeup(void *opaque, int irq, int req);
 
 # define OMAP_BAD_REG(paddr)		\
-        qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad register %#08"HWADDR_PRIx"\n", \
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad register %#.8"HWADDR_PRIx"\n", \
                       __func__, paddr)
 # define OMAP_RO_REG(paddr)		\
-        qemu_log_mask(LOG_GUEST_ERROR, "%s: Read-only register %#08" \
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: Read-only register %#.8" \
                                        HWADDR_PRIx "\n", \
                       __func__, paddr)
 
diff --git a/softmmu/device_tree.c b/softmmu/device_tree.c
index b621f63fba..bd271ab66e 100644
--- a/softmmu/device_tree.c
+++ b/softmmu/device_tree.c
@@ -367,7 +367,7 @@ int qemu_fdt_setprop_cell(void *fdt, const char *node_path,
 
     r = fdt_setprop_cell(fdt, findnode_nofail(fdt, node_path), property, val);
     if (r < 0) {
-        error_report("%s: Couldn't set %s/%s = %#08x: %s", __func__,
+        error_report("%s: Couldn't set %s/%s = %#.8x: %s", __func__,
                      node_path, property, val, fdt_strerror(r));
         exit(1);
     }
diff --git a/target/openrisc/disas.c b/target/openrisc/disas.c
index dc025bd64d..024f243a45 100644
--- a/target/openrisc/disas.c
+++ b/target/openrisc/disas.c
@@ -45,7 +45,7 @@ int print_insn_or1k(bfd_vma addr, disassemble_info *info)
     insn = bfd_getb32(buffer);
 
     if (!decode(info, insn)) {
-        output(".long", "%#08x", insn);
+        output(".long", "%#.8x", insn);
     }
     return 4;
 }
-- 
2.31.1



             reply	other threads:[~2021-10-14 18:54 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-14 18:52 Dr. David Alan Gilbert (git) [this message]
2021-10-14 19:33 ` [PATCH] Fix %#08 misuses Richard Henderson
2021-10-14 21:56   ` Stafford Horne
2021-10-18  9:47     ` Dr. David Alan Gilbert

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211014185245.69803-1-dgilbert@redhat.com \
    --to=dgilbert@redhat.com \
    --cc=alistair.francis@wdc.com \
    --cc=atar4qemu@gmail.com \
    --cc=eblake@redhat.com \
    --cc=mark.cave-ayland@ilande.co.uk \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    --cc=shorne@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).