From: Alistair Francis <alistair.francis@opensource.wdc.com>
To: qemu-devel@nongnu.org
Cc: alistair23@gmail.com,
Richard Henderson <richard.henderson@linaro.org>,
LIU Zhiwei <zhiwei_liu@c-sky.com>,
Alistair Francis <alistair.francis@wdc.com>
Subject: [PULL 14/33] target/riscv: Properly check SEW in amo_op
Date: Fri, 22 Oct 2021 23:37:53 +1000 [thread overview]
Message-ID: <20211022133812.3972903-15-alistair.francis@opensource.wdc.com> (raw)
In-Reply-To: <20211022133812.3972903-1-alistair.francis@opensource.wdc.com>
From: Richard Henderson <richard.henderson@linaro.org>
We're currently assuming SEW <= 3, and the "else" from
the SEW == 3 must be less. Use a switch and explicitly
bound both SEW and SEQ for all cases.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-8-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
target/riscv/insn_trans/trans_rvv.c.inc | 26 +++++++++++++------------
1 file changed, 14 insertions(+), 12 deletions(-)
diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc
index 233131bae1..17ee3babef 100644
--- a/target/riscv/insn_trans/trans_rvv.c.inc
+++ b/target/riscv/insn_trans/trans_rvv.c.inc
@@ -704,18 +704,20 @@ static bool amo_op(DisasContext *s, arg_rwdvm *a, uint8_t seq)
gen_helper_exit_atomic(cpu_env);
s->base.is_jmp = DISAS_NORETURN;
return true;
- } else {
- if (s->sew == 3) {
- if (!is_32bit(s)) {
- fn = fnsd[seq];
- } else {
- /* Check done in amo_check(). */
- g_assert_not_reached();
- }
- } else {
- assert(seq < ARRAY_SIZE(fnsw));
- fn = fnsw[seq];
- }
+ }
+
+ switch (s->sew) {
+ case 0 ... 2:
+ assert(seq < ARRAY_SIZE(fnsw));
+ fn = fnsw[seq];
+ break;
+ case 3:
+ /* XLEN check done in amo_check(). */
+ assert(seq < ARRAY_SIZE(fnsd));
+ fn = fnsd[seq];
+ break;
+ default:
+ g_assert_not_reached();
}
data = FIELD_DP32(data, VDATA, MLEN, s->mlen);
--
2.31.1
next prev parent reply other threads:[~2021-10-22 13:49 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-22 13:37 [PULL 00/33] riscv-to-apply queue Alistair Francis
2021-10-22 13:37 ` [PULL 01/33] target/riscv: Pass the same value to oprsz and maxsz for vmv.v.v Alistair Francis
2021-10-22 13:37 ` [PULL 02/33] target/riscv: line up all of the registers in the info register dump Alistair Francis
2021-10-22 13:37 ` [PULL 03/33] target/riscv: Fix orc.b implementation Alistair Francis
2021-10-22 13:37 ` [PULL 04/33] hw/riscv: virt: Use machine->ram as the system memory Alistair Francis
2021-10-22 13:37 ` [PULL 05/33] target/riscv: fix TB_FLAGS bits overlapping bug for rvv/rvh Alistair Francis
2021-10-22 13:37 ` [PULL 06/33] target/riscv: Remove some unused macros Alistair Francis
2021-10-22 13:37 ` [PULL 07/33] target/riscv: Organise the CPU properties Alistair Francis
2021-10-22 13:37 ` [PULL 08/33] target/riscv: Move cpu_get_tb_cpu_state out of line Alistair Francis
2021-10-22 13:37 ` [PULL 09/33] target/riscv: Create RISCVMXL enumeration Alistair Francis
2021-10-22 13:37 ` [PULL 10/33] target/riscv: Split misa.mxl and misa.ext Alistair Francis
2021-10-22 13:37 ` [PULL 11/33] target/riscv: Replace riscv_cpu_is_32bit with riscv_cpu_mxl Alistair Francis
2021-10-22 13:37 ` [PULL 12/33] target/riscv: Add MXL/SXL/UXL to TB_FLAGS Alistair Francis
2021-10-22 13:37 ` [PULL 13/33] target/riscv: Use REQUIRE_64BIT in amo_check64 Alistair Francis
2021-10-22 13:37 ` Alistair Francis [this message]
2021-10-22 13:37 ` [PULL 15/33] target/riscv: Replace is_32bit with get_xl/get_xlen Alistair Francis
2021-10-22 13:37 ` [PULL 16/33] target/riscv: Replace DisasContext.w with DisasContext.ol Alistair Francis
2021-10-22 13:37 ` [PULL 17/33] target/riscv: Use gen_arith_per_ol for RVM Alistair Francis
2021-10-22 13:37 ` [PULL 18/33] target/riscv: Adjust trans_rev8_32 for riscv64 Alistair Francis
2021-10-22 13:37 ` [PULL 19/33] target/riscv: Use gen_unary_per_ol for RVB Alistair Francis
2021-10-22 13:37 ` [PULL 20/33] target/riscv: Use gen_shift*_per_ol for RVB, RVI Alistair Francis
2021-10-22 13:38 ` [PULL 21/33] target/riscv: Use riscv_csrrw_debug for cpu_dump Alistair Francis
2021-10-22 13:38 ` [PULL 22/33] target/riscv: Compute mstatus.sd on demand Alistair Francis
2021-10-22 13:38 ` [PULL 23/33] hw/riscv: opentitan: Update to the latest build Alistair Francis
2021-10-22 13:38 ` [PULL 24/33] hw/intc: Remove the Ibex PLIC Alistair Francis
2021-10-22 13:38 ` [PULL 25/33] hw/intc: sifive_plic: Move the properties Alistair Francis
2021-10-22 13:38 ` [PULL 26/33] hw/intc: sifive_plic: Cleanup the realize function Alistair Francis
2021-10-22 13:38 ` [PULL 27/33] hw/intc: sifive_plic: Cleanup the irq_request function Alistair Francis
2021-10-22 13:38 ` [PULL 28/33] hw/riscv: microchip_pfsoc: Use MachineState::ram and MachineClass::default_ram_id Alistair Francis
2021-10-22 13:38 ` [PULL 29/33] hw/riscv: opentitan: " Alistair Francis
2021-10-22 13:38 ` [PULL 30/33] hw/riscv: shakti_c: " Alistair Francis
2021-10-22 13:38 ` [PULL 31/33] hw/riscv: sifive_e: " Alistair Francis
2021-10-22 13:38 ` [PULL 32/33] hw/riscv: sifive_u: " Alistair Francis
2021-10-22 13:38 ` [PULL 33/33] hw/riscv: spike: " Alistair Francis
2021-10-22 21:39 ` [PULL 00/33] riscv-to-apply queue Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211022133812.3972903-15-alistair.francis@opensource.wdc.com \
--to=alistair.francis@opensource.wdc.com \
--cc=alistair.francis@wdc.com \
--cc=alistair23@gmail.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=zhiwei_liu@c-sky.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).