From: Alistair Francis <alistair.francis@opensource.wdc.com>
To: qemu-devel@nongnu.org
Cc: alistair23@gmail.com, Mingwang Li <limingwang@huawei.com>,
Yifei Jiang <jiangyifei@huawei.com>,
Alistair Francis <alistair.francis@wdc.com>
Subject: [PULL 04/33] hw/riscv: virt: Use machine->ram as the system memory
Date: Fri, 22 Oct 2021 23:37:43 +1000 [thread overview]
Message-ID: <20211022133812.3972903-5-alistair.francis@opensource.wdc.com> (raw)
In-Reply-To: <20211022133812.3972903-1-alistair.francis@opensource.wdc.com>
From: Mingwang Li <limingwang@huawei.com>
If default main_mem is used to be registered as the system memory,
other memory cannot be initialized. Therefore, the system memory
should be initialized to the machine->ram, which consists of the
default main_mem and other possible memory required by applications,
such as shared hugepage memory in DPDK.
Also, the mc->defaul_ram_id should be set to the default main_mem,
such as "riscv_virt_board.ram" for the virt machine.
Signed-off-by: Mingwang Li <limingwang@huawei.com>
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211016030908.40480-1-limingwang@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
hw/riscv/virt.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index ec0cb69b8c..b3b431c847 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -771,7 +771,6 @@ static void virt_machine_init(MachineState *machine)
const MemMapEntry *memmap = virt_memmap;
RISCVVirtState *s = RISCV_VIRT_MACHINE(machine);
MemoryRegion *system_memory = get_system_memory();
- MemoryRegion *main_mem = g_new(MemoryRegion, 1);
MemoryRegion *mask_rom = g_new(MemoryRegion, 1);
char *plic_hart_config, *soc_name;
target_ulong start_addr = memmap[VIRT_DRAM].base;
@@ -890,10 +889,8 @@ static void virt_machine_init(MachineState *machine)
}
/* register system main memory (actual RAM) */
- memory_region_init_ram(main_mem, NULL, "riscv_virt_board.ram",
- machine->ram_size, &error_fatal);
memory_region_add_subregion(system_memory, memmap[VIRT_DRAM].base,
- main_mem);
+ machine->ram);
/* create device tree */
create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline,
@@ -1032,6 +1029,7 @@ static void virt_machine_class_init(ObjectClass *oc, void *data)
mc->cpu_index_to_instance_props = riscv_numa_cpu_index_to_props;
mc->get_default_cpu_node_id = riscv_numa_get_default_cpu_node_id;
mc->numa_mem_supported = true;
+ mc->default_ram_id = "riscv_virt_board.ram";
machine_class_allow_dynamic_sysbus_dev(mc, TYPE_RAMFB_DEVICE);
--
2.31.1
next prev parent reply other threads:[~2021-10-22 13:43 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-22 13:37 [PULL 00/33] riscv-to-apply queue Alistair Francis
2021-10-22 13:37 ` [PULL 01/33] target/riscv: Pass the same value to oprsz and maxsz for vmv.v.v Alistair Francis
2021-10-22 13:37 ` [PULL 02/33] target/riscv: line up all of the registers in the info register dump Alistair Francis
2021-10-22 13:37 ` [PULL 03/33] target/riscv: Fix orc.b implementation Alistair Francis
2021-10-22 13:37 ` Alistair Francis [this message]
2021-10-22 13:37 ` [PULL 05/33] target/riscv: fix TB_FLAGS bits overlapping bug for rvv/rvh Alistair Francis
2021-10-22 13:37 ` [PULL 06/33] target/riscv: Remove some unused macros Alistair Francis
2021-10-22 13:37 ` [PULL 07/33] target/riscv: Organise the CPU properties Alistair Francis
2021-10-22 13:37 ` [PULL 08/33] target/riscv: Move cpu_get_tb_cpu_state out of line Alistair Francis
2021-10-22 13:37 ` [PULL 09/33] target/riscv: Create RISCVMXL enumeration Alistair Francis
2021-10-22 13:37 ` [PULL 10/33] target/riscv: Split misa.mxl and misa.ext Alistair Francis
2021-10-22 13:37 ` [PULL 11/33] target/riscv: Replace riscv_cpu_is_32bit with riscv_cpu_mxl Alistair Francis
2021-10-22 13:37 ` [PULL 12/33] target/riscv: Add MXL/SXL/UXL to TB_FLAGS Alistair Francis
2021-10-22 13:37 ` [PULL 13/33] target/riscv: Use REQUIRE_64BIT in amo_check64 Alistair Francis
2021-10-22 13:37 ` [PULL 14/33] target/riscv: Properly check SEW in amo_op Alistair Francis
2021-10-22 13:37 ` [PULL 15/33] target/riscv: Replace is_32bit with get_xl/get_xlen Alistair Francis
2021-10-22 13:37 ` [PULL 16/33] target/riscv: Replace DisasContext.w with DisasContext.ol Alistair Francis
2021-10-22 13:37 ` [PULL 17/33] target/riscv: Use gen_arith_per_ol for RVM Alistair Francis
2021-10-22 13:37 ` [PULL 18/33] target/riscv: Adjust trans_rev8_32 for riscv64 Alistair Francis
2021-10-22 13:37 ` [PULL 19/33] target/riscv: Use gen_unary_per_ol for RVB Alistair Francis
2021-10-22 13:37 ` [PULL 20/33] target/riscv: Use gen_shift*_per_ol for RVB, RVI Alistair Francis
2021-10-22 13:38 ` [PULL 21/33] target/riscv: Use riscv_csrrw_debug for cpu_dump Alistair Francis
2021-10-22 13:38 ` [PULL 22/33] target/riscv: Compute mstatus.sd on demand Alistair Francis
2021-10-22 13:38 ` [PULL 23/33] hw/riscv: opentitan: Update to the latest build Alistair Francis
2021-10-22 13:38 ` [PULL 24/33] hw/intc: Remove the Ibex PLIC Alistair Francis
2021-10-22 13:38 ` [PULL 25/33] hw/intc: sifive_plic: Move the properties Alistair Francis
2021-10-22 13:38 ` [PULL 26/33] hw/intc: sifive_plic: Cleanup the realize function Alistair Francis
2021-10-22 13:38 ` [PULL 27/33] hw/intc: sifive_plic: Cleanup the irq_request function Alistair Francis
2021-10-22 13:38 ` [PULL 28/33] hw/riscv: microchip_pfsoc: Use MachineState::ram and MachineClass::default_ram_id Alistair Francis
2021-10-22 13:38 ` [PULL 29/33] hw/riscv: opentitan: " Alistair Francis
2021-10-22 13:38 ` [PULL 30/33] hw/riscv: shakti_c: " Alistair Francis
2021-10-22 13:38 ` [PULL 31/33] hw/riscv: sifive_e: " Alistair Francis
2021-10-22 13:38 ` [PULL 32/33] hw/riscv: sifive_u: " Alistair Francis
2021-10-22 13:38 ` [PULL 33/33] hw/riscv: spike: " Alistair Francis
2021-10-22 21:39 ` [PULL 00/33] riscv-to-apply queue Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211022133812.3972903-5-alistair.francis@opensource.wdc.com \
--to=alistair.francis@opensource.wdc.com \
--cc=alistair.francis@wdc.com \
--cc=alistair23@gmail.com \
--cc=jiangyifei@huawei.com \
--cc=limingwang@huawei.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).