From: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
To: qemu-devel@nongnu.org
Cc: "Richard Henderson" <richard.henderson@linaro.org>,
"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
"Aurelien Jarno" <aurelien@aurel32.net>,
"Aleksandar Rikalo" <aleksandar.rikalo@syrmia.com>
Subject: [PATCH v3 26/32] target/mips: Convert MSA COPY_S and INSERT opcodes to decodetree
Date: Thu, 28 Oct 2021 23:08:37 +0200 [thread overview]
Message-ID: <20211028210843.2120802-27-f4bug@amsat.org> (raw)
In-Reply-To: <20211028210843.2120802-1-f4bug@amsat.org>
Convert the COPY_S (Element Copy to GPR Signed) opcode
and INSERT (GPR Insert Element) opcode to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
target/mips/tcg/msa.decode | 2 +
target/mips/tcg/msa_translate.c | 103 +++++---------------------------
2 files changed, 18 insertions(+), 87 deletions(-)
diff --git a/target/mips/tcg/msa.decode b/target/mips/tcg/msa.decode
index 0e166a4e61d..9aac6808fc5 100644
--- a/target/mips/tcg/msa.decode
+++ b/target/mips/tcg/msa.decode
@@ -167,7 +167,9 @@ BNZ 010001 111 .. ..... ................ @bz
SLDI 011110 0000 ...... ..... ..... 011001 @elm_df
SPLATI 011110 0001 ...... ..... ..... 011001 @elm_df
+ COPY_S 011110 0010 ...... ..... ..... 011001 @elm_df
COPY_U 011110 0011 ...... ..... ..... 011001 @elm_df
+ INSERT 011110 0100 ...... ..... ..... 011001 @elm_df
INSVE 011110 0101 ...... ..... ..... 011001 @elm_df
FCAF 011110 0000 . ..... ..... ..... 011010 @3rf_w
diff --git a/target/mips/tcg/msa_translate.c b/target/mips/tcg/msa_translate.c
index eca38557769..e10dd5e6ef8 100644
--- a/target/mips/tcg/msa_translate.c
+++ b/target/mips/tcg/msa_translate.c
@@ -46,9 +46,7 @@ enum {
/* ELM instructions df(bits 21..16) = _b, _h, _w, _d */
OPC_CTCMSA = (0x0 << 22) | (0x3E << 16) | OPC_MSA_ELM,
OPC_CFCMSA = (0x1 << 22) | (0x3E << 16) | OPC_MSA_ELM,
- OPC_COPY_S_df = (0x2 << 22) | (0x00 << 16) | OPC_MSA_ELM,
OPC_MOVE_V = (0x2 << 22) | (0x3E << 16) | OPC_MSA_ELM,
- OPC_INSERT_df = (0x4 << 22) | (0x00 << 16) | OPC_MSA_ELM,
};
static const char msaregnames[][6] = {
@@ -629,98 +627,31 @@ static bool trans_COPY_U(DisasContext *ctx, arg_msa_elm_df *a)
return trans_msa_elm_fn(ctx, a, gen_msa_copy_u);
}
-static void gen_msa_elm_df(DisasContext *ctx, uint32_t df, uint32_t n)
+static bool trans_COPY_S(DisasContext *ctx, arg_msa_elm_df *a)
{
-#define MASK_MSA_ELM(op) (MASK_MSA_MINOR(op) | (op & (0xf << 22)))
- uint8_t ws = (ctx->opcode >> 11) & 0x1f;
- uint8_t wd = (ctx->opcode >> 6) & 0x1f;
+ static gen_helper_piii * const gen_msa_copy_s[4] = {
+ gen_helper_msa_copy_s_b, gen_helper_msa_copy_s_h,
+ gen_helper_msa_copy_s_w, NULL_IF_MIPS32(gen_helper_msa_copy_s_d)
+ };
- TCGv_i32 tws = tcg_const_i32(ws);
- TCGv_i32 twd = tcg_const_i32(wd);
- TCGv_i32 tn = tcg_const_i32(n);
+ return trans_msa_elm_fn(ctx, a, gen_msa_copy_s);
+}
- switch (MASK_MSA_ELM(ctx->opcode)) {
- case OPC_COPY_S_df:
- case OPC_INSERT_df:
-#if !defined(TARGET_MIPS64)
- /* Double format valid only for MIPS64 */
- if (df == DF_DOUBLE) {
- gen_reserved_instruction(ctx);
- break;
- }
-#endif
- switch (MASK_MSA_ELM(ctx->opcode)) {
- case OPC_COPY_S_df:
- if (likely(wd != 0)) {
- switch (df) {
- case DF_BYTE:
- gen_helper_msa_copy_s_b(cpu_env, twd, tws, tn);
- break;
- case DF_HALF:
- gen_helper_msa_copy_s_h(cpu_env, twd, tws, tn);
- break;
- case DF_WORD:
- gen_helper_msa_copy_s_w(cpu_env, twd, tws, tn);
- break;
-#if defined(TARGET_MIPS64)
- case DF_DOUBLE:
- gen_helper_msa_copy_s_d(cpu_env, twd, tws, tn);
- break;
-#endif
- default:
- assert(0);
- }
- }
- break;
- case OPC_INSERT_df:
- switch (df) {
- case DF_BYTE:
- gen_helper_msa_insert_b(cpu_env, twd, tws, tn);
- break;
- case DF_HALF:
- gen_helper_msa_insert_h(cpu_env, twd, tws, tn);
- break;
- case DF_WORD:
- gen_helper_msa_insert_w(cpu_env, twd, tws, tn);
- break;
-#if defined(TARGET_MIPS64)
- case DF_DOUBLE:
- gen_helper_msa_insert_d(cpu_env, twd, tws, tn);
- break;
-#endif
- default:
- assert(0);
- }
- break;
- }
- break;
- default:
- MIPS_INVAL("MSA instruction");
- gen_reserved_instruction(ctx);
- }
- tcg_temp_free_i32(twd);
- tcg_temp_free_i32(tws);
- tcg_temp_free_i32(tn);
+static bool trans_INSERT(DisasContext *ctx, arg_msa_elm_df *a)
+{
+ static gen_helper_piii * const gen_msa_insert[4] = {
+ gen_helper_msa_insert_b, gen_helper_msa_insert_h,
+ gen_helper_msa_insert_w, NULL_IF_MIPS32(gen_helper_msa_insert_d)
+ };
+
+ return trans_msa_elm_fn(ctx, a, gen_msa_insert);
}
static void gen_msa_elm(DisasContext *ctx)
{
uint8_t dfn = (ctx->opcode >> 16) & 0x3f;
- uint32_t df = 0, n = 0;
- if ((dfn & 0x30) == 0x00) {
- n = dfn & 0x0f;
- df = DF_BYTE;
- } else if ((dfn & 0x38) == 0x20) {
- n = dfn & 0x07;
- df = DF_HALF;
- } else if ((dfn & 0x3c) == 0x30) {
- n = dfn & 0x03;
- df = DF_WORD;
- } else if ((dfn & 0x3e) == 0x38) {
- n = dfn & 0x01;
- df = DF_DOUBLE;
- } else if (dfn == 0x3E) {
+ if (dfn == 0x3E) {
/* CTCMSA, CFCMSA, MOVE.V */
gen_msa_elm_3e(ctx);
return;
@@ -728,8 +659,6 @@ static void gen_msa_elm(DisasContext *ctx)
gen_reserved_instruction(ctx);
return;
}
-
- gen_msa_elm_df(ctx, df, n);
}
TRANS(FCAF, trans_msa_3rf, gen_helper_msa_fcaf_df);
--
2.31.1
next prev parent reply other threads:[~2021-10-28 21:53 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-28 21:08 [PATCH v3 00/32] target/mips: Fully convert MSA opcodes to decodetree Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 01/32] target/mips: Fix MSA MADDV.B opcode Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 02/32] target/mips: Fix MSA MSUBV.B opcode Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 03/32] tests/tcg/mips: Run MSA opcodes tests on user-mode emulation Philippe Mathieu-Daudé
2021-10-29 16:12 ` Richard Henderson
2021-11-02 12:32 ` Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 04/32] target/mips: Use dup_const() to simplify Philippe Mathieu-Daudé
2021-10-29 16:13 ` Richard Henderson
2021-10-28 21:08 ` [PATCH v3 05/32] target/mips: Have check_msa_access() return a boolean Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 06/32] target/mips: Use enum definitions from CPUMIPSMSADataFormat enum Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 07/32] target/mips: Rename sa16 -> sa, bz_df -> bz -> bz_v Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 08/32] target/mips: Convert MSA LDI opcode to decodetree Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 09/32] target/mips: Convert MSA I5 instruction format " Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 10/32] target/mips: Convert MSA BIT " Philippe Mathieu-Daudé
2021-10-29 16:14 ` Richard Henderson
2021-10-28 21:08 ` [PATCH v3 11/32] target/mips: Convert MSA SHF opcode " Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 12/32] target/mips: Convert MSA I8 instruction format " Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 13/32] target/mips: Convert MSA load/store " Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 14/32] target/mips: Convert MSA 2RF " Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 15/32] target/mips: Convert MSA FILL opcode " Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 16/32] target/mips: Convert MSA 2R instruction format " Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 17/32] target/mips: Convert MSA VEC " Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 18/32] target/mips: Convert MSA 3RF instruction format to decodetree (DF_HALF) Philippe Mathieu-Daudé
2021-10-29 16:29 ` Richard Henderson
2021-10-28 21:08 ` [PATCH v3 19/32] target/mips: Convert MSA 3RF instruction format to decodetree (DF_WORD) Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 20/32] target/mips: Convert MSA 3R instruction format to decodetree (part 1/4) Philippe Mathieu-Daudé
2021-10-29 16:35 ` Richard Henderson
2021-10-29 17:23 ` Philippe Mathieu-Daudé
2021-10-29 17:50 ` Richard Henderson
2021-11-02 12:31 ` Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 21/32] target/mips: Convert MSA 3R instruction format to decodetree (part 2/4) Philippe Mathieu-Daudé
2021-10-29 16:37 ` Richard Henderson
2021-10-28 21:08 ` [PATCH v3 22/32] target/mips: Convert MSA 3R instruction format to decodetree (part 3/4) Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 23/32] target/mips: Convert MSA 3R instruction format to decodetree (part 4/4) Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 24/32] target/mips: Convert MSA ELM instruction format to decodetree Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 25/32] target/mips: Convert MSA COPY_U opcode " Philippe Mathieu-Daudé
2021-10-29 16:42 ` Richard Henderson
2021-10-28 21:08 ` Philippe Mathieu-Daudé [this message]
2021-10-28 21:08 ` [PATCH v3 27/32] target/mips: Convert MSA MOVE.V " Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 28/32] target/mips: Convert CFCMSA " Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 29/32] target/mips: Convert CTCMSA " Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 30/32] target/mips: Remove generic MSA opcode Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 31/32] target/mips: Remove one MSA unnecessary decodetree overlap group Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 32/32] target/mips: Adjust style in msa_translate_init() Philippe Mathieu-Daudé
2021-11-02 12:36 ` [PATCH v3 00/32] target/mips: Fully convert MSA opcodes to decodetree Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211028210843.2120802-27-f4bug@amsat.org \
--to=f4bug@amsat.org \
--cc=aleksandar.rikalo@syrmia.com \
--cc=aurelien@aurel32.net \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).