From: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
To: qemu-devel@nongnu.org
Cc: "Richard Henderson" <richard.henderson@linaro.org>,
"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
"Aurelien Jarno" <aurelien@aurel32.net>,
"Aleksandar Rikalo" <aleksandar.rikalo@syrmia.com>
Subject: [PATCH v3 08/32] target/mips: Convert MSA LDI opcode to decodetree
Date: Thu, 28 Oct 2021 23:08:19 +0200 [thread overview]
Message-ID: <20211028210843.2120802-9-f4bug@amsat.org> (raw)
In-Reply-To: <20211028210843.2120802-1-f4bug@amsat.org>
Convert the LDI opcode (Immediate Load) to decodetree. Since it
overlaps with the generic MSA handler, use a decodetree overlap
group.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211027180730.1551932-6-f4bug@amsat.org>
---
target/mips/tcg/msa.decode | 8 +++++++-
target/mips/tcg/msa_translate.c | 22 ++++++++++++++--------
2 files changed, 21 insertions(+), 9 deletions(-)
diff --git a/target/mips/tcg/msa.decode b/target/mips/tcg/msa.decode
index 56419a24eb9..bdfe5a24cb3 100644
--- a/target/mips/tcg/msa.decode
+++ b/target/mips/tcg/msa.decode
@@ -14,10 +14,12 @@
&r rs rt rd sa
&msa_bz df wt sa
+&msa_ldi df wd sa
@lsa ...... rs:5 rt:5 rd:5 ... sa:2 ...... &r
@bz_v ...... ... .. wt:5 sa:16 &msa_bz df=3
@bz ...... ... df:2 wt:5 sa:16 &msa_bz
+@ldi ...... ... df:2 sa:s10 wd:5 ...... &msa_ldi
LSA 000000 ..... ..... ..... 000 .. 000101 @lsa
DLSA 000000 ..... ..... ..... 000 .. 010101 @lsa
@@ -27,4 +29,8 @@ BNZ_V 010001 01111 ..... ................ @bz_v
BZ 010001 110 .. ..... ................ @bz
BNZ 010001 111 .. ..... ................ @bz
-MSA 011110 --------------------------
+{
+ LDI 011110 110 .. .......... ..... 000111 @ldi
+
+ MSA 011110 --------------------------
+}
diff --git a/target/mips/tcg/msa_translate.c b/target/mips/tcg/msa_translate.c
index e1d90fbde25..ff78359597f 100644
--- a/target/mips/tcg/msa_translate.c
+++ b/target/mips/tcg/msa_translate.c
@@ -70,7 +70,6 @@ enum {
OPC_CLEI_S_df = (0x4 << 23) | OPC_MSA_I5_07,
OPC_MINI_U_df = (0x5 << 23) | OPC_MSA_I5_06,
OPC_CLEI_U_df = (0x5 << 23) | OPC_MSA_I5_07,
- OPC_LDI_df = (0x6 << 23) | OPC_MSA_I5_07,
/* I8 instruction */
OPC_ANDI_B = (0x0 << 24) | OPC_MSA_I8_00,
@@ -513,13 +512,6 @@ static void gen_msa_i5(DisasContext *ctx)
case OPC_CLEI_U_df:
gen_helper_msa_clei_u_df(cpu_env, tdf, twd, tws, timm);
break;
- case OPC_LDI_df:
- {
- int32_t s10 = sextract32(ctx->opcode, 11, 10);
- tcg_gen_movi_i32(timm, s10);
- gen_helper_msa_ldi_df(cpu_env, tdf, twd, timm);
- }
- break;
default:
MIPS_INVAL("MSA instruction");
gen_reserved_instruction(ctx);
@@ -532,6 +524,20 @@ static void gen_msa_i5(DisasContext *ctx)
tcg_temp_free_i32(timm);
}
+static bool trans_LDI(DisasContext *ctx, arg_msa_ldi *a)
+{
+ if (!check_msa_enabled(ctx)) {
+ return true;
+ }
+
+ gen_helper_msa_ldi_df(cpu_env,
+ tcg_constant_i32(a->df),
+ tcg_constant_i32(a->wd),
+ tcg_constant_i32(a->sa));
+
+ return true;
+}
+
static void gen_msa_bit(DisasContext *ctx)
{
#define MASK_MSA_BIT(op) (MASK_MSA_MINOR(op) | (op & (0x7 << 23)))
--
2.31.1
next prev parent reply other threads:[~2021-10-28 21:28 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-28 21:08 [PATCH v3 00/32] target/mips: Fully convert MSA opcodes to decodetree Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 01/32] target/mips: Fix MSA MADDV.B opcode Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 02/32] target/mips: Fix MSA MSUBV.B opcode Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 03/32] tests/tcg/mips: Run MSA opcodes tests on user-mode emulation Philippe Mathieu-Daudé
2021-10-29 16:12 ` Richard Henderson
2021-11-02 12:32 ` Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 04/32] target/mips: Use dup_const() to simplify Philippe Mathieu-Daudé
2021-10-29 16:13 ` Richard Henderson
2021-10-28 21:08 ` [PATCH v3 05/32] target/mips: Have check_msa_access() return a boolean Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 06/32] target/mips: Use enum definitions from CPUMIPSMSADataFormat enum Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 07/32] target/mips: Rename sa16 -> sa, bz_df -> bz -> bz_v Philippe Mathieu-Daudé
2021-10-28 21:08 ` Philippe Mathieu-Daudé [this message]
2021-10-28 21:08 ` [PATCH v3 09/32] target/mips: Convert MSA I5 instruction format to decodetree Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 10/32] target/mips: Convert MSA BIT " Philippe Mathieu-Daudé
2021-10-29 16:14 ` Richard Henderson
2021-10-28 21:08 ` [PATCH v3 11/32] target/mips: Convert MSA SHF opcode " Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 12/32] target/mips: Convert MSA I8 instruction format " Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 13/32] target/mips: Convert MSA load/store " Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 14/32] target/mips: Convert MSA 2RF " Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 15/32] target/mips: Convert MSA FILL opcode " Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 16/32] target/mips: Convert MSA 2R instruction format " Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 17/32] target/mips: Convert MSA VEC " Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 18/32] target/mips: Convert MSA 3RF instruction format to decodetree (DF_HALF) Philippe Mathieu-Daudé
2021-10-29 16:29 ` Richard Henderson
2021-10-28 21:08 ` [PATCH v3 19/32] target/mips: Convert MSA 3RF instruction format to decodetree (DF_WORD) Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 20/32] target/mips: Convert MSA 3R instruction format to decodetree (part 1/4) Philippe Mathieu-Daudé
2021-10-29 16:35 ` Richard Henderson
2021-10-29 17:23 ` Philippe Mathieu-Daudé
2021-10-29 17:50 ` Richard Henderson
2021-11-02 12:31 ` Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 21/32] target/mips: Convert MSA 3R instruction format to decodetree (part 2/4) Philippe Mathieu-Daudé
2021-10-29 16:37 ` Richard Henderson
2021-10-28 21:08 ` [PATCH v3 22/32] target/mips: Convert MSA 3R instruction format to decodetree (part 3/4) Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 23/32] target/mips: Convert MSA 3R instruction format to decodetree (part 4/4) Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 24/32] target/mips: Convert MSA ELM instruction format to decodetree Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 25/32] target/mips: Convert MSA COPY_U opcode " Philippe Mathieu-Daudé
2021-10-29 16:42 ` Richard Henderson
2021-10-28 21:08 ` [PATCH v3 26/32] target/mips: Convert MSA COPY_S and INSERT opcodes " Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 27/32] target/mips: Convert MSA MOVE.V opcode " Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 28/32] target/mips: Convert CFCMSA " Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 29/32] target/mips: Convert CTCMSA " Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 30/32] target/mips: Remove generic MSA opcode Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 31/32] target/mips: Remove one MSA unnecessary decodetree overlap group Philippe Mathieu-Daudé
2021-10-28 21:08 ` [PATCH v3 32/32] target/mips: Adjust style in msa_translate_init() Philippe Mathieu-Daudé
2021-11-02 12:36 ` [PATCH v3 00/32] target/mips: Fully convert MSA opcodes to decodetree Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211028210843.2120802-9-f4bug@amsat.org \
--to=f4bug@amsat.org \
--cc=aleksandar.rikalo@syrmia.com \
--cc=aurelien@aurel32.net \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).