From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Eduardo Habkost <ehabkost@redhat.com>,
Jean-Philippe Brucker <jean-philippe@linaro.org>,
Jason Wang <jasowang@redhat.com>,
Richard Henderson <richard.henderson@linaro.org>,
Peter Xu <peterx@redhat.com>, Eric Auger <eric.auger@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>, Ani Sinha <ani@anisinha.ca>,
Igor Mammedov <imammedo@redhat.com>
Subject: [PULL 4/9] hw/i386/pc: Remove x86_iommu_get_type()
Date: Mon, 1 Nov 2021 19:44:32 -0400 [thread overview]
Message-ID: <20211101234358.582487-5-mst@redhat.com> (raw)
In-Reply-To: <20211101234358.582487-1-mst@redhat.com>
From: Jean-Philippe Brucker <jean-philippe@linaro.org>
To generate the IOMMU ACPI table, acpi-build.c can use base QEMU types
instead of a special IommuType value.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20211026182024.2642038-3-jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
include/hw/i386/x86-iommu.h | 12 ------------
hw/i386/acpi-build.c | 20 +++++++++-----------
hw/i386/amd_iommu.c | 2 --
hw/i386/intel_iommu.c | 3 ---
hw/i386/x86-iommu-stub.c | 5 -----
hw/i386/x86-iommu.c | 5 -----
6 files changed, 9 insertions(+), 38 deletions(-)
diff --git a/include/hw/i386/x86-iommu.h b/include/hw/i386/x86-iommu.h
index 9de92d33a1..5ba0c056d6 100644
--- a/include/hw/i386/x86-iommu.h
+++ b/include/hw/i386/x86-iommu.h
@@ -33,12 +33,6 @@ OBJECT_DECLARE_TYPE(X86IOMMUState, X86IOMMUClass, X86_IOMMU_DEVICE)
typedef struct X86IOMMUIrq X86IOMMUIrq;
typedef struct X86IOMMU_MSIMessage X86IOMMU_MSIMessage;
-typedef enum IommuType {
- TYPE_INTEL,
- TYPE_AMD,
- TYPE_NONE
-} IommuType;
-
struct X86IOMMUClass {
SysBusDeviceClass parent;
/* Intel/AMD specific realize() hook */
@@ -71,7 +65,6 @@ struct X86IOMMUState {
OnOffAuto intr_supported; /* Whether vIOMMU supports IR */
bool dt_supported; /* Whether vIOMMU supports DT */
bool pt_supported; /* Whether vIOMMU supports pass-through */
- IommuType type; /* IOMMU type - AMD/Intel */
QLIST_HEAD(, IEC_Notifier) iec_notifiers; /* IEC notify list */
};
@@ -140,11 +133,6 @@ struct X86IOMMU_MSIMessage {
*/
X86IOMMUState *x86_iommu_get_default(void);
-/*
- * x86_iommu_get_type - get IOMMU type
- */
-IommuType x86_iommu_get_type(void);
-
/**
* x86_iommu_iec_register_notifier - register IEC (Interrupt Entry
* Cache) notifiers
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 81418b7911..ab49e799ff 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -2488,6 +2488,7 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)
PCMachineState *pcms = PC_MACHINE(machine);
PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
X86MachineState *x86ms = X86_MACHINE(machine);
+ X86IOMMUState *iommu = x86_iommu_get_default();
GArray *table_offsets;
unsigned facs, dsdt, rsdt, fadt;
AcpiPmInfo pm;
@@ -2604,17 +2605,14 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)
build_mcfg(tables_blob, tables->linker, &mcfg, x86ms->oem_id,
x86ms->oem_table_id);
}
- if (x86_iommu_get_default()) {
- IommuType IOMMUType = x86_iommu_get_type();
- if (IOMMUType == TYPE_AMD) {
- acpi_add_table(table_offsets, tables_blob);
- build_amd_iommu(tables_blob, tables->linker, x86ms->oem_id,
- x86ms->oem_table_id);
- } else if (IOMMUType == TYPE_INTEL) {
- acpi_add_table(table_offsets, tables_blob);
- build_dmar_q35(tables_blob, tables->linker, x86ms->oem_id,
- x86ms->oem_table_id);
- }
+ if (object_dynamic_cast(OBJECT(iommu), TYPE_AMD_IOMMU_DEVICE)) {
+ acpi_add_table(table_offsets, tables_blob);
+ build_amd_iommu(tables_blob, tables->linker, x86ms->oem_id,
+ x86ms->oem_table_id);
+ } else if (object_dynamic_cast(OBJECT(iommu), TYPE_INTEL_IOMMU_DEVICE)) {
+ acpi_add_table(table_offsets, tables_blob);
+ build_dmar_q35(tables_blob, tables->linker, x86ms->oem_id,
+ x86ms->oem_table_id);
}
if (machine->nvdimms_state->is_enabled) {
nvdimm_build_acpi(table_offsets, tables_blob, tables->linker,
diff --git a/hw/i386/amd_iommu.c b/hw/i386/amd_iommu.c
index 9242a0d3ed..91fe34ae58 100644
--- a/hw/i386/amd_iommu.c
+++ b/hw/i386/amd_iommu.c
@@ -1538,7 +1538,6 @@ static void amdvi_sysbus_realize(DeviceState *dev, Error **errp)
{
int ret = 0;
AMDVIState *s = AMD_IOMMU_DEVICE(dev);
- X86IOMMUState *x86_iommu = X86_IOMMU_DEVICE(dev);
MachineState *ms = MACHINE(qdev_get_machine());
PCMachineState *pcms = PC_MACHINE(ms);
X86MachineState *x86ms = X86_MACHINE(ms);
@@ -1548,7 +1547,6 @@ static void amdvi_sysbus_realize(DeviceState *dev, Error **errp)
amdvi_uint64_equal, g_free, g_free);
/* This device should take care of IOMMU PCI properties */
- x86_iommu->type = TYPE_AMD;
if (!qdev_realize(DEVICE(&s->pci), &bus->qbus, errp)) {
return;
}
diff --git a/hw/i386/intel_iommu.c b/hw/i386/intel_iommu.c
index 75f075547f..c27b20090e 100644
--- a/hw/i386/intel_iommu.c
+++ b/hw/i386/intel_iommu.c
@@ -3806,9 +3806,6 @@ static void vtd_realize(DeviceState *dev, Error **errp)
X86MachineState *x86ms = X86_MACHINE(ms);
PCIBus *bus = pcms->bus;
IntelIOMMUState *s = INTEL_IOMMU_DEVICE(dev);
- X86IOMMUState *x86_iommu = X86_IOMMU_DEVICE(dev);
-
- x86_iommu->type = TYPE_INTEL;
if (!vtd_decide_config(s, errp)) {
return;
diff --git a/hw/i386/x86-iommu-stub.c b/hw/i386/x86-iommu-stub.c
index c5ba077f9d..781b5ff922 100644
--- a/hw/i386/x86-iommu-stub.c
+++ b/hw/i386/x86-iommu-stub.c
@@ -36,8 +36,3 @@ bool x86_iommu_ir_supported(X86IOMMUState *s)
{
return false;
}
-
-IommuType x86_iommu_get_type(void)
-{
- abort();
-}
diff --git a/hw/i386/x86-iommu.c b/hw/i386/x86-iommu.c
index 86ad03972e..dc968c7a53 100644
--- a/hw/i386/x86-iommu.c
+++ b/hw/i386/x86-iommu.c
@@ -98,11 +98,6 @@ X86IOMMUState *x86_iommu_get_default(void)
return x86_iommu_default;
}
-IommuType x86_iommu_get_type(void)
-{
- return x86_iommu_default->type;
-}
-
static void x86_iommu_realize(DeviceState *dev, Error **errp)
{
X86IOMMUState *x86_iommu = X86_IOMMU_DEVICE(dev);
--
MST
next prev parent reply other threads:[~2021-11-02 0:05 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-01 23:44 [PULL 0/9] pc,pci,virtio: features, fixes Michael S. Tsirkin
2021-11-01 23:44 ` [PULL 1/9] qtest: fix 'expression is always false' build failure in qtest_has_accel() Michael S. Tsirkin
2021-11-01 23:44 ` [PULL 2/9] vhost-vdpa: Set discarding of RAM broken when initializing the backend Michael S. Tsirkin
2021-11-01 23:44 ` [PULL 3/9] hw/acpi: Add VIOT table Michael S. Tsirkin
2021-11-01 23:44 ` Michael S. Tsirkin [this message]
2021-11-01 23:44 ` [PULL 5/9] hw/i386/pc: Move IOMMU singleton into PCMachineState Michael S. Tsirkin
2021-11-01 23:44 ` [PULL 6/9] hw/i386/pc: Allow instantiating a virtio-iommu device Michael S. Tsirkin
2021-11-01 23:44 ` [PULL 7/9] pci: Define pci_bus_dev_fn/pci_bus_fn/pci_bus_ret_fn Michael S. Tsirkin
2021-11-01 23:44 ` [PULL 8/9] pci: Export pci_for_each_device_under_bus*() Michael S. Tsirkin
2021-11-02 13:54 ` Matthew Rosato
2021-11-01 23:44 ` [PULL 9/9] hw/i386: fix vmmouse registration Michael S. Tsirkin
2021-11-03 1:04 ` [PULL 0/9] pc,pci,virtio: features, fixes Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211101234358.582487-5-mst@redhat.com \
--to=mst@redhat.com \
--cc=ani@anisinha.ca \
--cc=ehabkost@redhat.com \
--cc=eric.auger@redhat.com \
--cc=imammedo@redhat.com \
--cc=jasowang@redhat.com \
--cc=jean-philippe@linaro.org \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=peterx@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).