From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org>,
"Warner Losh" <imp@bsdimp.com>
Subject: [PULL 50/60] target/ppc: Restrict ppc_cpu_do_unaligned_access to sysemu
Date: Tue, 2 Nov 2021 07:07:30 -0400 [thread overview]
Message-ID: <20211102110740.215699-51-richard.henderson@linaro.org> (raw)
In-Reply-To: <20211102110740.215699-1-richard.henderson@linaro.org>
This is not used by, nor required by, user-only.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
target/ppc/internal.h | 8 +++-----
target/ppc/excp_helper.c | 8 +++-----
2 files changed, 6 insertions(+), 10 deletions(-)
diff --git a/target/ppc/internal.h b/target/ppc/internal.h
index 339974b7d8..6aa9484f34 100644
--- a/target/ppc/internal.h
+++ b/target/ppc/internal.h
@@ -211,11 +211,6 @@ void helper_compute_fprf_float16(CPUPPCState *env, float16 arg);
void helper_compute_fprf_float32(CPUPPCState *env, float32 arg);
void helper_compute_fprf_float128(CPUPPCState *env, float128 arg);
-/* Raise a data fault alignment exception for the specified virtual address */
-void ppc_cpu_do_unaligned_access(CPUState *cs, vaddr addr,
- MMUAccessType access_type, int mmu_idx,
- uintptr_t retaddr) QEMU_NORETURN;
-
/* translate.c */
int ppc_fixup_cpu(PowerPCCPU *cpu);
@@ -291,6 +286,9 @@ void ppc_cpu_record_sigsegv(CPUState *cs, vaddr addr,
bool ppc_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
MMUAccessType access_type, int mmu_idx,
bool probe, uintptr_t retaddr);
+void ppc_cpu_do_unaligned_access(CPUState *cs, vaddr addr,
+ MMUAccessType access_type, int mmu_idx,
+ uintptr_t retaddr) QEMU_NORETURN;
#endif
#endif /* PPC_INTERNAL_H */
diff --git a/target/ppc/excp_helper.c b/target/ppc/excp_helper.c
index e568a54536..17607adbe4 100644
--- a/target/ppc/excp_helper.c
+++ b/target/ppc/excp_helper.c
@@ -1454,11 +1454,8 @@ void helper_book3s_msgsndp(CPUPPCState *env, target_ulong rb)
book3s_msgsnd_common(pir, PPC_INTERRUPT_DOORBELL);
}
-#endif
-#endif /* CONFIG_TCG */
-#endif
+#endif /* TARGET_PPC64 */
-#ifdef CONFIG_TCG
void ppc_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr,
MMUAccessType access_type,
int mmu_idx, uintptr_t retaddr)
@@ -1483,4 +1480,5 @@ void ppc_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr,
env->error_code = 0;
cpu_loop_exit_restore(cs, retaddr);
}
-#endif
+#endif /* CONFIG_TCG */
+#endif /* !CONFIG_USER_ONLY */
--
2.25.1
next prev parent reply other threads:[~2021-11-02 11:55 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-02 11:06 [PULL 00/60] accel/tcg patch queue Richard Henderson
2021-11-02 11:06 ` [PULL 01/60] accel/tcg: Split out adjust_signal_pc Richard Henderson
2021-11-02 11:06 ` [PULL 02/60] accel/tcg: Move clear_helper_retaddr to cpu loop Richard Henderson
2021-11-02 11:06 ` [PULL 03/60] accel/tcg: Split out handle_sigsegv_accerr_write Richard Henderson
2021-11-02 11:06 ` [PULL 04/60] accel/tcg: Fold cpu_exit_tb_from_sighandler into caller Richard Henderson
2021-11-02 11:06 ` [PULL 05/60] configure: Merge riscv32 and riscv64 host architectures Richard Henderson
2021-11-02 11:06 ` [PULL 06/60] linux-user: Reorg handling for SIGSEGV Richard Henderson
2021-11-02 11:06 ` [PULL 07/60] linux-user/host/x86: Populate host_signal.h Richard Henderson
2021-11-02 11:06 ` [PULL 08/60] linux-user/host/ppc: " Richard Henderson
2021-11-02 11:06 ` [PULL 09/60] linux-user/host/alpha: " Richard Henderson
2021-11-02 11:06 ` [PULL 10/60] linux-user/host/sparc: " Richard Henderson
2021-11-02 11:06 ` [PULL 11/60] linux-user/host/arm: " Richard Henderson
2021-11-02 11:06 ` [PULL 12/60] linux-user/host/aarch64: " Richard Henderson
2021-11-02 11:06 ` [PULL 13/60] linux-user/host/s390: " Richard Henderson
2021-11-02 11:06 ` [PULL 14/60] linux-user/host/mips: " Richard Henderson
2021-11-02 11:06 ` [PULL 15/60] linux-user/host/riscv: " Richard Henderson
2021-11-02 11:06 ` [PULL 16/60] target/arm: Fixup comment re handle_cpu_signal Richard Henderson
2021-11-02 11:06 ` [PULL 17/60] linux-user/host/riscv: Improve host_signal_write Richard Henderson
2021-11-02 11:06 ` [PULL 18/60] linux-user/signal: Drop HOST_SIGNAL_PLACEHOLDER Richard Henderson
2021-11-02 11:06 ` [PULL 19/60] hw/core: Add TCGCPUOps.record_sigsegv Richard Henderson
2021-11-02 11:07 ` [PULL 20/60] linux-user: Add cpu_loop_exit_sigsegv Richard Henderson
2021-11-02 11:07 ` [PULL 21/60] target/alpha: Implement alpha_cpu_record_sigsegv Richard Henderson
2021-11-02 11:07 ` [PULL 22/60] target/arm: Use cpu_loop_exit_sigsegv for mte tag lookup Richard Henderson
2021-11-02 11:07 ` [PULL 23/60] target/arm: Implement arm_cpu_record_sigsegv Richard Henderson
2021-11-02 11:07 ` [PULL 24/60] target/cris: Make cris_cpu_tlb_fill sysemu only Richard Henderson
2021-11-02 11:07 ` [PULL 25/60] target/hexagon: Remove hexagon_cpu_tlb_fill Richard Henderson
2021-11-02 11:07 ` [PULL 26/60] target/hppa: Make hppa_cpu_tlb_fill sysemu only Richard Henderson
2021-11-02 11:07 ` [PULL 27/60] target/i386: Implement x86_cpu_record_sigsegv Richard Henderson
2021-11-02 11:07 ` [PULL 28/60] target/m68k: Make m68k_cpu_tlb_fill sysemu only Richard Henderson
2021-11-02 11:07 ` [PULL 29/60] target/microblaze: Make mb_cpu_tlb_fill " Richard Henderson
2021-11-02 11:07 ` [PULL 30/60] target/mips: Make mips_cpu_tlb_fill " Richard Henderson
2021-11-02 11:07 ` [PULL 31/60] target/nios2: Implement nios2_cpu_record_sigsegv Richard Henderson
2021-11-02 11:07 ` [PULL 32/60] linux-user/openrisc: Abort for EXCP_RANGE, EXCP_FPE Richard Henderson
2021-11-02 11:07 ` [PULL 33/60] target/openrisc: Make openrisc_cpu_tlb_fill sysemu only Richard Henderson
2021-11-02 11:07 ` [PULL 34/60] target/ppc: Implement ppc_cpu_record_sigsegv Richard Henderson
2021-11-02 11:07 ` [PULL 35/60] target/riscv: Make riscv_cpu_tlb_fill sysemu only Richard Henderson
2021-11-02 11:07 ` [PULL 36/60] target/s390x: Use probe_access_flags in s390_probe_access Richard Henderson
2021-11-02 11:07 ` [PULL 37/60] target/s390x: Implement s390_cpu_record_sigsegv Richard Henderson
2021-11-02 11:07 ` [PULL 38/60] target/sh4: Make sh4_cpu_tlb_fill sysemu only Richard Henderson
2021-11-02 11:07 ` [PULL 39/60] target/sparc: Make sparc_cpu_tlb_fill " Richard Henderson
2021-11-02 11:07 ` [PULL 40/60] target/xtensa: Make xtensa_cpu_tlb_fill " Richard Henderson
2021-11-02 11:07 ` [PULL 41/60] accel/tcg: Restrict TCGCPUOps::tlb_fill() to sysemu Richard Henderson
2021-11-02 11:07 ` [PULL 42/60] hw/core: Add TCGCPUOps.record_sigbus Richard Henderson
2021-11-02 11:07 ` [PULL 43/60] linux-user: Add cpu_loop_exit_sigbus Richard Henderson
2021-11-02 11:07 ` [PULL 44/60] target/alpha: Implement alpha_cpu_record_sigbus Richard Henderson
2021-11-02 11:07 ` [PULL 45/60] target/arm: Implement arm_cpu_record_sigbus Richard Henderson
2021-11-02 11:07 ` [PULL 46/60] linux-user/hppa: Remove EXCP_UNALIGN handling Richard Henderson
2021-11-02 11:07 ` [PULL 47/60] target/microblaze: Do not set MO_ALIGN for user-only Richard Henderson
2021-11-02 11:07 ` [PULL 48/60] target/ppc: Move SPR_DSISR setting to powerpc_excp Richard Henderson
2021-11-02 11:07 ` [PULL 49/60] target/ppc: Set fault address in ppc_cpu_do_unaligned_access Richard Henderson
2021-11-02 11:07 ` Richard Henderson [this message]
2021-11-02 11:07 ` [PULL 51/60] linux-user/ppc: Remove POWERPC_EXCP_ALIGN handling Richard Henderson
2021-11-02 11:07 ` [PULL 52/60] target/s390x: Implement s390x_cpu_record_sigbus Richard Henderson
2021-11-02 11:07 ` [PULL 53/60] target/sh4: Set fault address in superh_cpu_do_unaligned_access Richard Henderson
2021-11-02 11:07 ` [PULL 54/60] target/sparc: Remove DEBUG_UNALIGNED Richard Henderson
2021-11-02 11:07 ` [PULL 55/60] target/sparc: Split out build_sfsr Richard Henderson
2021-11-02 11:07 ` [PULL 56/60] target/sparc: Set fault address in sparc_cpu_do_unaligned_access Richard Henderson
2021-11-02 11:07 ` [PULL 57/60] accel/tcg: Report unaligned atomics for user-only Richard Henderson
2021-11-02 11:07 ` [PULL 58/60] accel/tcg: Report unaligned load/store " Richard Henderson
2021-11-02 11:07 ` [PULL 59/60] tcg: Add helper_unaligned_{ld,st} for user-only sigbus Richard Henderson
2021-11-02 11:07 ` [PULL 60/60] linux-user: Handle BUS_ADRALN in host_signal_handler Richard Henderson
2021-11-02 19:11 ` [PULL 00/60] accel/tcg patch queue Richard Henderson
2021-11-02 23:27 ` Warner Losh
2021-11-02 23:35 ` Richard Henderson
2021-11-02 23:37 ` Warner Losh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211102110740.215699-51-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=f4bug@amsat.org \
--cc=imp@bsdimp.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).