From: Cindy Lu <lulu@redhat.com>
To: lulu@redhat.com, mst@redhat.com, jasowang@redhat.com,
kraxel@redhat.com, dgilbert@redhat.com, stefanha@redhat.com,
arei.gonglei@huawei.com, marcandre.lureau@redhat.com,
qemu-devel@nongnu.org
Subject: [PATCH v10 03/10] virtio-pci: decouple the single vector from the interrupt process
Date: Fri, 5 Nov 2021 00:48:20 +0800 [thread overview]
Message-ID: <20211104164827.21911-4-lulu@redhat.com> (raw)
In-Reply-To: <20211104164827.21911-1-lulu@redhat.com>
To reuse the interrupt process in configure interrupt
Need to decouple the single vector from the interrupt process. Add new function
kvm_virtio_pci_vector_use_one and _release_one. These functions are use
for the single vector, the whole process will finish in a loop for the vq number.
Signed-off-by: Cindy Lu <lulu@redhat.com>
---
hw/virtio/virtio-pci.c | 131 +++++++++++++++++++++++------------------
1 file changed, 73 insertions(+), 58 deletions(-)
diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
index 4bdb6e5694..7201cf3dc1 100644
--- a/hw/virtio/virtio-pci.c
+++ b/hw/virtio/virtio-pci.c
@@ -677,7 +677,6 @@ static uint32_t virtio_read_config(PCIDevice *pci_dev,
}
static int kvm_virtio_pci_vq_vector_use(VirtIOPCIProxy *proxy,
- unsigned int queue_no,
unsigned int vector)
{
VirtIOIRQFD *irqfd = &proxy->vector_irqfd[vector];
@@ -740,87 +739,103 @@ static int virtio_pci_get_notifier(VirtIOPCIProxy *proxy, int queue_no,
return 0;
}
-static int kvm_virtio_pci_vector_use(VirtIOPCIProxy *proxy, int nvqs)
+static int kvm_virtio_pci_vector_use_one(VirtIOPCIProxy *proxy, int queue_no)
{
+ unsigned int vector;
+ int ret;
+ EventNotifier *n;
PCIDevice *dev = &proxy->pci_dev;
VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus);
VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
- unsigned int vector;
- int ret, queue_no;
- EventNotifier *n;
- for (queue_no = 0; queue_no < nvqs; queue_no++) {
- if (!virtio_queue_get_num(vdev, queue_no)) {
- break;
- }
- ret = virtio_pci_get_notifier(proxy, queue_no, &n, &vector);
- if (ret < 0) {
- break;
- }
- if (vector >= msix_nr_vectors_allocated(dev)) {
- continue;
- }
- ret = kvm_virtio_pci_vq_vector_use(proxy, queue_no, vector);
+
+ ret = virtio_pci_get_notifier(proxy, queue_no, &n, &vector);
+ if (ret < 0) {
+ return ret;
+ }
+ if (vector >= msix_nr_vectors_allocated(dev)) {
+ return 0;
+ }
+ ret = kvm_virtio_pci_vq_vector_use(proxy, vector);
+ if (ret < 0) {
+ goto undo;
+ }
+ /*
+ * If guest supports masking, set up irqfd now.
+ * Otherwise, delay until unmasked in the frontend.
+ */
+ if (vdev->use_guest_notifier_mask && k->guest_notifier_mask) {
+ ret = kvm_virtio_pci_irqfd_use(proxy, n, vector);
if (ret < 0) {
+ kvm_virtio_pci_vq_vector_release(proxy, vector);
goto undo;
}
- /* If guest supports masking, set up irqfd now.
- * Otherwise, delay until unmasked in the frontend.
- */
- if (vdev->use_guest_notifier_mask && k->guest_notifier_mask) {
- ret = kvm_virtio_pci_irqfd_use(proxy, n, vector);
- if (ret < 0) {
- kvm_virtio_pci_vq_vector_release(proxy, vector);
- goto undo;
- }
- }
}
- return 0;
+ return 0;
undo:
- while (--queue_no >= 0) {
- vector = virtio_queue_vector(vdev, queue_no);
- if (vector >= msix_nr_vectors_allocated(dev)) {
- continue;
+
+ vector = virtio_queue_vector(vdev, queue_no);
+ if (vector >= msix_nr_vectors_allocated(dev)) {
+ return ret;
+ }
+ if (vdev->use_guest_notifier_mask && k->guest_notifier_mask) {
+ ret = virtio_pci_get_notifier(proxy, queue_no, &n, &vector);
+ if (ret < 0) {
+ return ret;
}
- if (vdev->use_guest_notifier_mask && k->guest_notifier_mask) {
- ret = virtio_pci_get_notifier(proxy, queue_no, &n, &vector);
- if (ret < 0) {
- break;
- }
- kvm_virtio_pci_irqfd_release(proxy, n, vector);
+ kvm_virtio_pci_irqfd_release(proxy, n, vector);
+ }
+ return ret;
+}
+static int kvm_virtio_pci_vector_use(VirtIOPCIProxy *proxy, int nvqs)
+{
+ int queue_no;
+ int ret = 0;
+ VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus);
+
+ for (queue_no = 0; queue_no < nvqs; queue_no++) {
+ if (!virtio_queue_get_num(vdev, queue_no)) {
+ return -1;
}
- kvm_virtio_pci_vq_vector_release(proxy, vector);
+ ret = kvm_virtio_pci_vector_use_one(proxy, queue_no);
}
return ret;
}
-static void kvm_virtio_pci_vector_release(VirtIOPCIProxy *proxy, int nvqs)
+
+static void kvm_virtio_pci_vector_release_one(VirtIOPCIProxy *proxy,
+ int queue_no)
{
- PCIDevice *dev = &proxy->pci_dev;
VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus);
unsigned int vector;
- int queue_no;
- VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
EventNotifier *n;
- int ret ;
+ int ret;
+ VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
+ PCIDevice *dev = &proxy->pci_dev;
+
+ ret = virtio_pci_get_notifier(proxy, queue_no, &n, &vector);
+ if (ret < 0) {
+ return;
+ }
+ if (vector >= msix_nr_vectors_allocated(dev)) {
+ return;
+ }
+ if (vdev->use_guest_notifier_mask && k->guest_notifier_mask) {
+ kvm_virtio_pci_irqfd_release(proxy, n, vector);
+ }
+ kvm_virtio_pci_vq_vector_release(proxy, vector);
+}
+
+static void kvm_virtio_pci_vector_release(VirtIOPCIProxy *proxy, int nvqs)
+{
+ int queue_no;
+ VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus);
+
for (queue_no = 0; queue_no < nvqs; queue_no++) {
if (!virtio_queue_get_num(vdev, queue_no)) {
break;
}
- ret = virtio_pci_get_notifier(proxy, queue_no, &n, &vector);
- if (ret < 0) {
- break;
- }
- if (vector >= msix_nr_vectors_allocated(dev)) {
- continue;
- }
- /* If guest supports masking, clean up irqfd now.
- * Otherwise, it was cleaned when masked in the frontend.
- */
- if (vdev->use_guest_notifier_mask && k->guest_notifier_mask) {
- kvm_virtio_pci_irqfd_release(proxy, n, vector);
- }
- kvm_virtio_pci_vq_vector_release(proxy, vector);
+ kvm_virtio_pci_vector_release_one(proxy, queue_no);
}
}
--
2.21.3
next prev parent reply other threads:[~2021-11-04 16:52 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-04 16:48 [PATCH v10 00/10]vhost-vdpa: add support for configure interrupt Cindy Lu
2021-11-04 16:48 ` [PATCH v10 01/10] virtio: introduce macro IRTIO_CONFIG_IRQ_IDX Cindy Lu
2021-11-04 16:48 ` [PATCH v10 02/10] virtio-pci: decouple notifier from interrupt process Cindy Lu
2021-11-04 16:48 ` Cindy Lu [this message]
2021-11-04 16:48 ` [PATCH v10 04/10] vhost: introduce new VhostOps vhost_set_config_call Cindy Lu
2021-11-04 16:48 ` [PATCH v10 05/10] vhost-vdpa: add support for config interrupt Cindy Lu
2021-11-04 16:48 ` [PATCH v10 06/10] virtio: add support for configure interrupt Cindy Lu
2021-11-04 16:48 ` [PATCH v10 07/10] vhost: " Cindy Lu
2021-11-04 16:48 ` [PATCH v10 08/10] virtio-net: " Cindy Lu
2021-11-04 16:48 ` [PATCH v10 09/10] virtio-mmio: " Cindy Lu
2021-11-04 16:48 ` [PATCH v10 10/10] virtio-pci: " Cindy Lu
2021-11-07 8:36 ` [PATCH v10 00/10]vhost-vdpa: " Michael S. Tsirkin
2021-11-08 10:53 ` Stefan Hajnoczi
2021-11-11 4:41 ` Jason Wang
2021-11-11 9:21 ` Stefan Hajnoczi
2021-11-12 3:39 ` Jason Wang
2022-01-09 17:06 ` Michael S. Tsirkin
2022-01-09 17:56 ` Michael S. Tsirkin
2022-01-10 1:37 ` Cindy Lu
2022-01-10 2:37 ` Jason Wang
2022-01-10 2:40 ` Cindy Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211104164827.21911-4-lulu@redhat.com \
--to=lulu@redhat.com \
--cc=arei.gonglei@huawei.com \
--cc=dgilbert@redhat.com \
--cc=jasowang@redhat.com \
--cc=kraxel@redhat.com \
--cc=marcandre.lureau@redhat.com \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).