From: LIU Zhiwei <zhiwei_liu@c-sky.com>
To: qemu-devel@nongnu.org, qemu-riscv@nongnu.org
Cc: palmer@dabbelt.com, richard.henderson@linaro.org,
bin.meng@windriver.com, Alistair.Francis@wdc.com,
LIU Zhiwei <zhiwei_liu@c-sky.com>
Subject: [PATCH v2 03/14] target/riscv: Extend pc for runtime pc write
Date: Wed, 10 Nov 2021 15:04:41 +0800 [thread overview]
Message-ID: <20211110070452.48539-4-zhiwei_liu@c-sky.com> (raw)
In-Reply-To: <20211110070452.48539-1-zhiwei_liu@c-sky.com>
In some cases, we must restore the guest PC to the address of the start of
the TB, such as when the instruction counter hits zero. So extend pc register
according to current xlen for these cases.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
---
target/riscv/cpu.c | 22 +++++++++++++++++++---
target/riscv/cpu.h | 2 ++
target/riscv/cpu_helper.c | 2 +-
3 files changed, 22 insertions(+), 4 deletions(-)
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index f812998123..0d2d175fa2 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -319,7 +319,12 @@ static void riscv_cpu_set_pc(CPUState *cs, vaddr value)
{
RISCVCPU *cpu = RISCV_CPU(cs);
CPURISCVState *env = &cpu->env;
- env->pc = value;
+
+ if (cpu_get_xl(env) == MXL_RV32) {
+ env->pc = (int32_t)value;
+ } else {
+ env->pc = value;
+ }
}
static void riscv_cpu_synchronize_from_tb(CPUState *cs,
@@ -327,7 +332,13 @@ static void riscv_cpu_synchronize_from_tb(CPUState *cs,
{
RISCVCPU *cpu = RISCV_CPU(cs);
CPURISCVState *env = &cpu->env;
- env->pc = tb->pc;
+ RISCVMXL xl = FIELD_EX32(tb->flags, TB_FLAGS, XL);
+
+ if (xl == MXL_RV32) {
+ env->pc = (int32_t)tb->pc;
+ } else {
+ env->pc = tb->pc;
+ }
}
static bool riscv_cpu_has_work(CPUState *cs)
@@ -348,7 +359,12 @@ static bool riscv_cpu_has_work(CPUState *cs)
void restore_state_to_opc(CPURISCVState *env, TranslationBlock *tb,
target_ulong *data)
{
- env->pc = data[0];
+ RISCVMXL xl = FIELD_EX32(tb->flags, TB_FLAGS, XL);
+ if (xl == MXL_RV32) {
+ env->pc = (int32_t)data[0];
+ } else {
+ env->pc = data[0];
+ }
}
static void riscv_cpu_reset(DeviceState *dev)
diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
index 0760c0af93..8befff0166 100644
--- a/target/riscv/cpu.h
+++ b/target/riscv/cpu.h
@@ -420,6 +420,8 @@ static inline RISCVMXL riscv_cpu_mxl(CPURISCVState *env)
}
#endif
+RISCVMXL cpu_get_xl(CPURISCVState *env);
+
/*
* A simplification for VLMAX
* = (1 << LMUL) * VLEN / (8 * (1 << SEW))
diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c
index 4c048cc266..79aba9c880 100644
--- a/target/riscv/cpu_helper.c
+++ b/target/riscv/cpu_helper.c
@@ -35,7 +35,7 @@ int riscv_cpu_mmu_index(CPURISCVState *env, bool ifetch)
#endif
}
-static RISCVMXL cpu_get_xl(CPURISCVState *env)
+RISCVMXL cpu_get_xl(CPURISCVState *env)
{
#if defined(TARGET_RISCV32)
return MXL_RV32;
--
2.25.1
next prev parent reply other threads:[~2021-11-10 7:09 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-10 7:04 [PATCH v2 00/14] Support UXL filed in xstatus LIU Zhiwei
2021-11-10 7:04 ` [PATCH v2 01/14] target/riscv: Sign extend pc for different XLEN LIU Zhiwei
2021-11-10 10:18 ` Richard Henderson
2021-11-10 7:04 ` [PATCH v2 02/14] target/riscv: Ignore the pc bits above XLEN LIU Zhiwei
2021-11-10 7:04 ` LIU Zhiwei [this message]
2021-11-10 7:04 ` [PATCH v2 04/14] target/riscv: Use gdb xml according to max mxlen LIU Zhiwei
2021-11-10 9:42 ` LIU Zhiwei
2021-11-10 7:04 ` [PATCH v2 05/14] target/riscv: Calculate address according to XLEN LIU Zhiwei
2021-11-10 10:52 ` Richard Henderson
2021-11-10 13:44 ` LIU Zhiwei
2021-11-10 14:40 ` Richard Henderson
2021-11-11 5:04 ` LIU Zhiwei
2021-11-10 7:04 ` [PATCH v2 06/14] target/riscv: Adjust vsetvl " LIU Zhiwei
2021-11-10 7:04 ` [PATCH v2 07/14] target/riscv: Ajdust vector atomic check with XLEN LIU Zhiwei
2021-11-10 10:55 ` Richard Henderson
2021-11-10 7:04 ` [PATCH v2 08/14] target/riscv: Fix check range for first fault only LIU Zhiwei
2021-11-10 7:04 ` [PATCH v2 09/14] target/riscv: Relax debug check for pm write LIU Zhiwei
2021-11-10 11:31 ` Richard Henderson
2021-11-10 7:04 ` [PATCH v2 10/14] target/riscv: Adjust vector address with mask LIU Zhiwei
2021-11-10 11:11 ` Richard Henderson
2021-11-10 14:08 ` LIU Zhiwei
2021-11-10 14:43 ` Richard Henderson
2021-11-10 7:04 ` [PATCH v2 11/14] target/riscv: Adjust scalar reg in vector with XLEN LIU Zhiwei
2021-11-10 11:29 ` Richard Henderson
2021-11-10 7:04 ` [PATCH v2 12/14] target/riscv: Split out the vill from vtype LIU Zhiwei
2021-11-10 11:23 ` Richard Henderson
2021-11-10 14:26 ` LIU Zhiwei
2021-11-10 15:01 ` Richard Henderson
2021-11-10 7:04 ` [PATCH v2 13/14] target/riscv: Don't save pc when exception return LIU Zhiwei
2021-11-10 11:25 ` Richard Henderson
2021-11-10 7:04 ` [PATCH v2 14/14] target/riscv: Enable uxl field write LIU Zhiwei
2021-11-10 11:27 ` Richard Henderson
2021-11-10 14:38 ` LIU Zhiwei
2021-11-10 15:02 ` Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211110070452.48539-4-zhiwei_liu@c-sky.com \
--to=zhiwei_liu@c-sky.com \
--cc=Alistair.Francis@wdc.com \
--cc=bin.meng@windriver.com \
--cc=palmer@dabbelt.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).