From: LIU Zhiwei <zhiwei_liu@c-sky.com>
To: qemu-devel@nongnu.org, qemu-riscv@nongnu.org
Cc: palmer@dabbelt.com, richard.henderson@linaro.org,
bin.meng@windriver.com, Alistair.Francis@wdc.com,
LIU Zhiwei <zhiwei_liu@c-sky.com>
Subject: [PATCH v3 00/20] Support UXL filed in xstatus
Date: Thu, 11 Nov 2021 13:57:40 +0800 [thread overview]
Message-ID: <20211111055800.42672-1-zhiwei_liu@c-sky.com> (raw)
In this patch set, we process the pc reigsters writes,
gdb reads and writes, and address calculation under
different UXLEN settings.
The patch set v3 mainly address Richard comments on v2.
Patch 1,2,3,5,6,16,17 have been reviewed.
v3:
Merge gen_pm_adjust_address into a canonical address function
Adjust address for RVA with XLEN
Split pm_enabled into pm_mask_enabled and pm_base_enabled
Replace array of pm tcg globals with one scalar tcg global
Split and change patch sequence
v2:
Split out vill from vtype
Remove context switch when xlen changes at exception
Use XL instead of OL in many places
Use pointer masking and XLEN for vector address
Define an common fuction to calculate address for ldst
LIU Zhiwei (20):
target/riscv: Don't save pc when exception return
target/riscv: Sign extend pc for different XLEN
target/riscv: Ignore the pc bits above XLEN
target/riscv: Extend pc for runtime pc write
target/riscv: Use gdb xml according to max mxlen
target/riscv: Relax debug check for pm write
target/riscv: Adjust csr write mask with XLEN
target/riscv: Create current pm fields in env
target/riscv: Alloc tcg global for cur_pm[mask|base]
target/riscv: Calculate address according to XLEN
target/riscv: Split pm_enabled into mask and base
target/riscv: Split out the vill from vtype
target/riscv: Fix RESERVED field length in VTYPE
target/riscv: Adjust vsetvl according to XLEN
target/riscv: Remove VILL field in VTYPE
target/riscv: Ajdust vector atomic check with XLEN
target/riscv: Fix check range for first fault only
target/riscv: Adjust vector address with mask
target/riscv: Adjust scalar reg in vector with XLEN
target/riscv: Enable uxl field write
target/riscv/cpu.c | 23 +++++-
target/riscv/cpu.h | 13 +++-
target/riscv/cpu_helper.c | 66 ++++++++++++----
target/riscv/csr.c | 40 +++++++++-
target/riscv/gdbstub.c | 71 ++++++++++++-----
target/riscv/helper.h | 6 +-
.../riscv/insn_trans/trans_privileged.c.inc | 7 +-
target/riscv/insn_trans/trans_rva.c.inc | 9 +--
target/riscv/insn_trans/trans_rvd.c.inc | 19 +----
target/riscv/insn_trans/trans_rvf.c.inc | 19 +----
target/riscv/insn_trans/trans_rvi.c.inc | 22 +-----
target/riscv/insn_trans/trans_rvv.c.inc | 51 ++++++++----
target/riscv/machine.c | 11 +++
target/riscv/op_helper.c | 7 +-
target/riscv/translate.c | 77 +++++++++----------
target/riscv/vector_helper.c | 38 +++++----
16 files changed, 293 insertions(+), 186 deletions(-)
--
2.25.1
next reply other threads:[~2021-11-11 6:00 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-11 5:57 LIU Zhiwei [this message]
2021-11-11 5:57 ` [PATCH v3 01/20] target/riscv: Don't save pc when exception return LIU Zhiwei
2021-11-11 5:57 ` [PATCH v3 02/20] target/riscv: Sign extend pc for different XLEN LIU Zhiwei
2021-11-11 5:57 ` [PATCH v3 03/20] target/riscv: Ignore the pc bits above XLEN LIU Zhiwei
2021-11-11 5:57 ` [PATCH v3 04/20] target/riscv: Extend pc for runtime pc write LIU Zhiwei
2021-11-11 11:19 ` Richard Henderson
2021-11-11 5:57 ` [PATCH v3 05/20] target/riscv: Use gdb xml according to max mxlen LIU Zhiwei
2021-11-11 5:57 ` [PATCH v3 06/20] target/riscv: Relax debug check for pm write LIU Zhiwei
2021-11-11 5:57 ` [PATCH v3 07/20] target/riscv: Adjust csr write mask with XLEN LIU Zhiwei
2021-11-11 11:21 ` Richard Henderson
2021-11-11 5:57 ` [PATCH v3 08/20] target/riscv: Create current pm fields in env LIU Zhiwei
2021-11-11 5:57 ` [PATCH v3 09/20] target/riscv: Alloc tcg global for cur_pm[mask|base] LIU Zhiwei
2021-11-11 11:26 ` Richard Henderson
2021-11-11 5:57 ` [PATCH v3 10/20] target/riscv: Calculate address according to XLEN LIU Zhiwei
2021-11-11 11:28 ` Richard Henderson
2021-11-11 5:57 ` [PATCH v3 11/20] target/riscv: Split pm_enabled into mask and base LIU Zhiwei
2021-11-11 11:29 ` Richard Henderson
2021-11-11 5:57 ` [PATCH v3 12/20] target/riscv: Split out the vill from vtype LIU Zhiwei
2021-11-11 11:31 ` Richard Henderson
2021-11-11 5:57 ` [PATCH v3 13/20] target/riscv: Fix RESERVED field length in VTYPE LIU Zhiwei
2021-11-11 11:33 ` Richard Henderson
2021-11-11 11:33 ` Richard Henderson
2021-11-11 5:57 ` [PATCH v3 14/20] target/riscv: Adjust vsetvl according to XLEN LIU Zhiwei
2021-11-11 11:35 ` Richard Henderson
2021-11-11 5:57 ` [PATCH v3 15/20] target/riscv: Remove VILL field in VTYPE LIU Zhiwei
2021-11-11 11:38 ` Richard Henderson
2021-11-11 5:57 ` [PATCH v3 16/20] target/riscv: Ajdust vector atomic check with XLEN LIU Zhiwei
2021-11-11 5:57 ` [PATCH v3 17/20] target/riscv: Fix check range for first fault only LIU Zhiwei
2021-11-11 5:57 ` [PATCH v3 18/20] target/riscv: Adjust vector address with mask LIU Zhiwei
2021-11-11 5:57 ` [PATCH v3 19/20] target/riscv: Adjust scalar reg in vector with XLEN LIU Zhiwei
2021-11-11 11:46 ` Richard Henderson
2021-11-11 14:43 ` LIU Zhiwei
2021-11-11 5:58 ` [PATCH v3 20/20] target/riscv: Enable uxl field write LIU Zhiwei
2021-11-11 11:49 ` Richard Henderson
2021-11-11 15:18 ` Frédéric Pétrot
2021-11-11 18:20 ` Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211111055800.42672-1-zhiwei_liu@c-sky.com \
--to=zhiwei_liu@c-sky.com \
--cc=Alistair.Francis@wdc.com \
--cc=bin.meng@windriver.com \
--cc=palmer@dabbelt.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).