qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Łukasz Gieryk" <lukasz.gieryk@linux.intel.com>
To: qemu-devel@nongnu.org
Cc: "Keith Busch" <kbusch@kernel.org>,
	"Łukasz Gieryk" <lukasz.gieryk@linux.intel.com>,
	"Klaus Jensen" <its@irrelevant.dk>,
	"Lukasz Maniak" <lukasz.maniak@linux.intel.com>,
	qemu-block@nongnu.org
Subject: [PATCH v2 09/15] hw/nvme: Make max_ioqpairs and msix_qsize configurable in runtime
Date: Tue, 16 Nov 2021 16:34:40 +0100	[thread overview]
Message-ID: <20211116153446.317143-10-lukasz.gieryk@linux.intel.com> (raw)
In-Reply-To: <20211116153446.317143-1-lukasz.gieryk@linux.intel.com>

The NVMe device defines two properties: max_ioqpairs, msix_qsize. Having
them as constants is problematic for SR-IOV support.

SR-IOV introduces virtual resources (queues, interrupts) that can be
assigned to PF and its dependent VFs. Each device, following a reset,
should work with the configured number of queues. A single constant is
no longer sufficient to hold the whole state.

This patch tries to solve the problem by introducing additional
variables in NvmeCtrl’s state. The variables for, e.g., managing queues
are therefore organized as:
 - n->params.max_ioqpairs – no changes, constant set by the user
 - n->(mutable_state) – (not a part of this patch) user-configurable,
                        specifies number of queues available _after_
                        reset
 - n->conf_ioqpairs - (new) used in all the places instead of the ‘old’
                      n->params.max_ioqpairs; initialized in realize()
                      and updated during reset() to reflect user’s
                      changes to the mutable state

Since the number of available i/o queues and interrupts can change in
runtime, buffers for sq/cqs and the MSIX-related structures are
allocated big enough to handle the limits, to completely avoid the
complicated reallocation. A helper function (nvme_update_msixcap_ts)
updates the corresponding capability register, to signal configuration
changes.

Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
---
 hw/nvme/ctrl.c | 52 ++++++++++++++++++++++++++++++++++----------------
 hw/nvme/nvme.h |  2 ++
 2 files changed, 38 insertions(+), 16 deletions(-)

diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c
index da5b630ae3..d502917d98 100644
--- a/hw/nvme/ctrl.c
+++ b/hw/nvme/ctrl.c
@@ -417,12 +417,12 @@ static bool nvme_nsid_valid(NvmeCtrl *n, uint32_t nsid)
 
 static int nvme_check_sqid(NvmeCtrl *n, uint16_t sqid)
 {
-    return sqid < n->params.max_ioqpairs + 1 && n->sq[sqid] != NULL ? 0 : -1;
+    return sqid < n->conf_ioqpairs + 1 && n->sq[sqid] != NULL ? 0 : -1;
 }
 
 static int nvme_check_cqid(NvmeCtrl *n, uint16_t cqid)
 {
-    return cqid < n->params.max_ioqpairs + 1 && n->cq[cqid] != NULL ? 0 : -1;
+    return cqid < n->conf_ioqpairs + 1 && n->cq[cqid] != NULL ? 0 : -1;
 }
 
 static void nvme_inc_cq_tail(NvmeCQueue *cq)
@@ -4035,8 +4035,7 @@ static uint16_t nvme_create_sq(NvmeCtrl *n, NvmeRequest *req)
         trace_pci_nvme_err_invalid_create_sq_cqid(cqid);
         return NVME_INVALID_CQID | NVME_DNR;
     }
-    if (unlikely(!sqid || sqid > n->params.max_ioqpairs ||
-        n->sq[sqid] != NULL)) {
+    if (unlikely(!sqid || sqid > n->conf_ioqpairs || n->sq[sqid] != NULL)) {
         trace_pci_nvme_err_invalid_create_sq_sqid(sqid);
         return NVME_INVALID_QID | NVME_DNR;
     }
@@ -4383,8 +4382,7 @@ static uint16_t nvme_create_cq(NvmeCtrl *n, NvmeRequest *req)
     trace_pci_nvme_create_cq(prp1, cqid, vector, qsize, qflags,
                              NVME_CQ_FLAGS_IEN(qflags) != 0);
 
-    if (unlikely(!cqid || cqid > n->params.max_ioqpairs ||
-        n->cq[cqid] != NULL)) {
+    if (unlikely(!cqid || cqid > n->conf_ioqpairs || n->cq[cqid] != NULL)) {
         trace_pci_nvme_err_invalid_create_cq_cqid(cqid);
         return NVME_INVALID_QID | NVME_DNR;
     }
@@ -4400,7 +4398,7 @@ static uint16_t nvme_create_cq(NvmeCtrl *n, NvmeRequest *req)
         trace_pci_nvme_err_invalid_create_cq_vector(vector);
         return NVME_INVALID_IRQ_VECTOR | NVME_DNR;
     }
-    if (unlikely(vector >= n->params.msix_qsize)) {
+    if (unlikely(vector >= n->conf_msix_qsize)) {
         trace_pci_nvme_err_invalid_create_cq_vector(vector);
         return NVME_INVALID_IRQ_VECTOR | NVME_DNR;
     }
@@ -4981,13 +4979,12 @@ defaults:
 
         break;
     case NVME_NUMBER_OF_QUEUES:
-        result = (n->params.max_ioqpairs - 1) |
-            ((n->params.max_ioqpairs - 1) << 16);
+        result = (n->conf_ioqpairs - 1) | ((n->conf_ioqpairs - 1) << 16);
         trace_pci_nvme_getfeat_numq(result);
         break;
     case NVME_INTERRUPT_VECTOR_CONF:
         iv = dw11 & 0xffff;
-        if (iv >= n->params.max_ioqpairs + 1) {
+        if (iv >= n->conf_ioqpairs + 1) {
             return NVME_INVALID_FIELD | NVME_DNR;
         }
 
@@ -5142,10 +5139,10 @@ static uint16_t nvme_set_feature(NvmeCtrl *n, NvmeRequest *req)
 
         trace_pci_nvme_setfeat_numq((dw11 & 0xffff) + 1,
                                     ((dw11 >> 16) & 0xffff) + 1,
-                                    n->params.max_ioqpairs,
-                                    n->params.max_ioqpairs);
-        req->cqe.result = cpu_to_le32((n->params.max_ioqpairs - 1) |
-                                      ((n->params.max_ioqpairs - 1) << 16));
+                                    n->conf_ioqpairs,
+                                    n->conf_ioqpairs);
+        req->cqe.result = cpu_to_le32((n->conf_ioqpairs - 1) |
+                                      ((n->conf_ioqpairs - 1) << 16));
         break;
     case NVME_ASYNCHRONOUS_EVENT_CONF:
         n->features.async_config = dw11;
@@ -5583,8 +5580,24 @@ static void nvme_process_sq(void *opaque)
     }
 }
 
+static void nvme_update_msixcap_ts(PCIDevice *pci_dev, uint32_t table_size)
+{
+    uint8_t *config;
+
+    if (!msix_present(pci_dev)) {
+        return;
+    }
+
+    assert(table_size <= pci_dev->msix_entries_nr);
+
+    config = pci_dev->config + pci_dev->msix_cap;
+    pci_set_word_by_mask(config + PCI_MSIX_FLAGS, PCI_MSIX_FLAGS_QSIZE,
+                         table_size - 1);
+}
+
 static void nvme_ctrl_reset(NvmeCtrl *n, NvmeResetType rst)
 {
+    PCIDevice *pci_dev = &n->parent_obj;
     NvmeNamespace *ns;
     int i;
 
@@ -5614,15 +5627,17 @@ static void nvme_ctrl_reset(NvmeCtrl *n, NvmeResetType rst)
         g_free(event);
     }
 
-    if (!pci_is_vf(&n->parent_obj) && n->params.sriov_max_vfs) {
+    if (!pci_is_vf(pci_dev) && n->params.sriov_max_vfs) {
         if (rst != NVME_RESET_CONTROLLER) {
-            pcie_sriov_pf_disable_vfs(&n->parent_obj);
+            pcie_sriov_pf_disable_vfs(pci_dev);
         }
     }
 
     n->aer_queued = 0;
     n->outstanding_aers = 0;
     n->qs_created = false;
+
+    nvme_update_msixcap_ts(pci_dev, n->conf_msix_qsize);
 }
 
 static void nvme_ctrl_shutdown(NvmeCtrl *n)
@@ -6333,6 +6348,9 @@ static void nvme_init_state(NvmeCtrl *n)
     NvmeSecCtrlEntry *sctrl;
     int i;
 
+    n->conf_ioqpairs = n->params.max_ioqpairs;
+    n->conf_msix_qsize = n->params.msix_qsize;
+
     /* add one to max_ioqpairs to account for the admin queue pair */
     n->reg_size = pow2ceil(sizeof(NvmeBar) +
                            2 * (n->params.max_ioqpairs + 1) * NVME_DB_SIZE);
@@ -6493,6 +6511,8 @@ static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
         }
     }
 
+    nvme_update_msixcap_ts(pci_dev, n->conf_msix_qsize);
+
     if (n->params.cmb_size_mb) {
         nvme_init_cmb(n, pci_dev);
     }
diff --git a/hw/nvme/nvme.h b/hw/nvme/nvme.h
index 6713493380..927890b490 100644
--- a/hw/nvme/nvme.h
+++ b/hw/nvme/nvme.h
@@ -424,6 +424,8 @@ typedef struct NvmeCtrl {
     uint64_t    starttime_ms;
     uint16_t    temperature;
     uint8_t     smart_critical_warning;
+    uint32_t    conf_msix_qsize;
+    uint32_t    conf_ioqpairs;
 
     struct {
         MemoryRegion mem;
-- 
2.25.1



  parent reply	other threads:[~2021-11-16 16:07 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-16 15:34 [PATCH v2 00/15] hw/nvme: SR-IOV with Virtualization Enhancements Łukasz Gieryk
2021-11-16 15:34 ` [PATCH v2 01/15] pcie: Add support for Single Root I/O Virtualization (SR/IOV) Łukasz Gieryk
2021-11-16 15:34 ` [PATCH v2 02/15] pcie: Add some SR/IOV API documentation in docs/pcie_sriov.txt Łukasz Gieryk
2021-11-16 15:34 ` [PATCH v2 03/15] pcie: Add helpers to the SR/IOV API Łukasz Gieryk
2021-11-16 15:34 ` [PATCH v2 04/15] pcie: Add 1.2 version token for the Power Management Capability Łukasz Gieryk
2021-11-16 15:34 ` [PATCH v2 05/15] hw/nvme: Add support for SR-IOV Łukasz Gieryk
2021-11-16 15:34 ` [PATCH v2 06/15] hw/nvme: Add support for Primary Controller Capabilities Łukasz Gieryk
2021-11-16 15:34 ` [PATCH v2 07/15] hw/nvme: Add support for Secondary Controller List Łukasz Gieryk
2021-11-16 15:34 ` [PATCH v2 08/15] hw/nvme: Implement the Function Level Reset Łukasz Gieryk
2021-11-16 21:28   ` Keith Busch
2021-11-17 11:22     ` Łukasz Gieryk
2021-11-16 15:34 ` Łukasz Gieryk [this message]
2021-11-16 15:34 ` [PATCH v2 10/15] hw/nvme: Remove reg_size variable and update BAR0 size calculation Łukasz Gieryk
2021-11-16 15:34 ` [PATCH v2 11/15] hw/nvme: Calculate BAR attributes in a function Łukasz Gieryk
2021-11-16 15:34 ` [PATCH v2 12/15] hw/nvme: Initialize capability structures for primary/secondary controllers Łukasz Gieryk
2021-11-24  8:04   ` Klaus Jensen
2021-11-24 14:26     ` Łukasz Gieryk
2021-11-25 12:02       ` Łukasz Gieryk
2021-11-16 15:34 ` [PATCH v2 13/15] hw/nvme: Add support for the Virtualization Management command Łukasz Gieryk
2021-11-24  8:06   ` Klaus Jensen
2021-11-24 14:20     ` Łukasz Gieryk
2021-11-16 15:34 ` [PATCH v2 14/15] docs: Add documentation for SR-IOV and Virtualization Enhancements Łukasz Gieryk
2021-11-16 15:34 ` [PATCH v2 15/15] hw/nvme: Update the initalization place for the AER queue Łukasz Gieryk
2021-11-24  8:03 ` [PATCH v2 00/15] hw/nvme: SR-IOV with Virtualization Enhancements Klaus Jensen
2021-11-25 14:15   ` Łukasz Gieryk
2021-12-20  7:12     ` Klaus Jensen
2021-12-20 10:06       ` Łukasz Gieryk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211116153446.317143-10-lukasz.gieryk@linux.intel.com \
    --to=lukasz.gieryk@linux.intel.com \
    --cc=its@irrelevant.dk \
    --cc=kbusch@kernel.org \
    --cc=lukasz.maniak@linux.intel.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).