* [PATCH-for-6.2? v2 1/3] docs: Spell QEMU all caps
2021-11-19 9:16 [PATCH-for-6.2? v2 0/3] misc: Spell QEMU all caps Philippe Mathieu-Daudé
@ 2021-11-19 9:16 ` Philippe Mathieu-Daudé
2021-11-19 9:17 ` [PATCH-for-6.2? v2 2/3] misc: " Philippe Mathieu-Daudé
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-11-19 9:16 UTC (permalink / raw)
To: qemu-devel
Cc: Kevin Wolf, Marcelo Tosatti, Eduardo Habkost, qemu-block,
John Snow, Cleber Rosa, Markus Armbruster,
Philippe Mathieu-Daudé, Darren Kenny, Hanna Reitz,
Vladimir Sementsov-Ogievskiy, kvm, Michael Roth, Paolo Bonzini,
Taylor Simpson, Eric Blake
QEMU should be written all caps.
Normally checkpatch.pl warns when it is not (see commit
9964d8f9422: "checkpatch: Add QEMU specific rule").
Replace Qemu -> QEMU.
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
docs/devel/modules.rst | 2 +-
docs/devel/multi-thread-tcg.rst | 2 +-
docs/devel/style.rst | 2 +-
docs/devel/ui.rst | 4 ++--
docs/interop/nbd.txt | 6 +++---
docs/interop/qcow2.txt | 8 ++++----
docs/multiseat.txt | 2 +-
docs/system/device-url-syntax.rst.inc | 2 +-
docs/system/i386/sgx.rst | 26 +++++++++++++-------------
docs/u2f.txt | 2 +-
10 files changed, 28 insertions(+), 28 deletions(-)
diff --git a/docs/devel/modules.rst b/docs/devel/modules.rst
index 066f347b89b..8e999c4fa48 100644
--- a/docs/devel/modules.rst
+++ b/docs/devel/modules.rst
@@ -1,5 +1,5 @@
============
-Qemu modules
+QEMU modules
============
.. kernel-doc:: include/qemu/module.h
diff --git a/docs/devel/multi-thread-tcg.rst b/docs/devel/multi-thread-tcg.rst
index 5b446ee08b6..c9541a7b20a 100644
--- a/docs/devel/multi-thread-tcg.rst
+++ b/docs/devel/multi-thread-tcg.rst
@@ -228,7 +228,7 @@ Emulated hardware state
Currently thanks to KVM work any access to IO memory is automatically
protected by the global iothread mutex, also known as the BQL (Big
-Qemu Lock). Any IO region that doesn't use global mutex is expected to
+QEMU Lock). Any IO region that doesn't use global mutex is expected to
do its own locking.
However IO memory isn't the only way emulated hardware state can be
diff --git a/docs/devel/style.rst b/docs/devel/style.rst
index 260e3263fa0..e00af62e763 100644
--- a/docs/devel/style.rst
+++ b/docs/devel/style.rst
@@ -686,7 +686,7 @@ Rationale: hex numbers are hard to read in logs when there is no 0x prefix,
especially when (occasionally) the representation doesn't contain any letters
and especially in one line with other decimal numbers. Number groups are allowed
to not use '0x' because for some things notations like %x.%x.%x are used not
-only in Qemu. Also dumping raw data bytes with '0x' is less readable.
+only in QEMU. Also dumping raw data bytes with '0x' is less readable.
'#' printf flag
---------------
diff --git a/docs/devel/ui.rst b/docs/devel/ui.rst
index 06c7d622ce7..17fb667dec4 100644
--- a/docs/devel/ui.rst
+++ b/docs/devel/ui.rst
@@ -1,8 +1,8 @@
=================
-Qemu UI subsystem
+QEMU UI subsystem
=================
-Qemu Clipboard
+QEMU Clipboard
--------------
.. kernel-doc:: include/ui/clipboard.h
diff --git a/docs/interop/nbd.txt b/docs/interop/nbd.txt
index 10ce098a29b..bdb0f2a41ac 100644
--- a/docs/interop/nbd.txt
+++ b/docs/interop/nbd.txt
@@ -1,4 +1,4 @@
-Qemu supports the NBD protocol, and has an internal NBD client (see
+QEMU supports the NBD protocol, and has an internal NBD client (see
block/nbd.c), an internal NBD server (see blockdev-nbd.c), and an
external NBD server tool (see qemu-nbd.c). The common code is placed
in nbd/*.
@@ -7,11 +7,11 @@ The NBD protocol is specified here:
https://github.com/NetworkBlockDevice/nbd/blob/master/doc/proto.md
The following paragraphs describe some specific properties of NBD
-protocol realization in Qemu.
+protocol realization in QEMU.
= Metadata namespaces =
-Qemu supports the "base:allocation" metadata context as defined in the
+QEMU supports the "base:allocation" metadata context as defined in the
NBD protocol specification, and also defines an additional metadata
namespace "qemu".
diff --git a/docs/interop/qcow2.txt b/docs/interop/qcow2.txt
index 0463f761efb..f7dc304ff69 100644
--- a/docs/interop/qcow2.txt
+++ b/docs/interop/qcow2.txt
@@ -313,7 +313,7 @@ The fields of the bitmaps extension are:
The number of bitmaps contained in the image. Must be
greater than or equal to 1.
- Note: Qemu currently only supports up to 65535 bitmaps per
+ Note: QEMU currently only supports up to 65535 bitmaps per
image.
4 - 7: Reserved, must be zero.
@@ -775,7 +775,7 @@ Structure of a bitmap directory entry:
2: extra_data_compatible
This flags is meaningful when the extra data is
unknown to the software (currently any extra data is
- unknown to Qemu).
+ unknown to QEMU).
If it is set, the bitmap may be used as expected, extra
data must be left as is.
If it is not set, the bitmap must not be used, but
@@ -793,7 +793,7 @@ Structure of a bitmap directory entry:
17: granularity_bits
Granularity bits. Valid values: 0 - 63.
- Note: Qemu currently supports only values 9 - 31.
+ Note: QEMU currently supports only values 9 - 31.
Granularity is calculated as
granularity = 1 << granularity_bits
@@ -804,7 +804,7 @@ Structure of a bitmap directory entry:
18 - 19: name_size
Size of the bitmap name. Must be non-zero.
- Note: Qemu currently doesn't support values greater than
+ Note: QEMU currently doesn't support values greater than
1023.
20 - 23: extra_data_size
diff --git a/docs/multiseat.txt b/docs/multiseat.txt
index 11850c96ff8..2b297e979d6 100644
--- a/docs/multiseat.txt
+++ b/docs/multiseat.txt
@@ -123,7 +123,7 @@ Background info is here:
guest side with pci-bridge-seat
-------------------------------
-Qemu version 2.4 and newer has a new pci-bridge-seat device which
+QEMU version 2.4 and newer has a new pci-bridge-seat device which
can be used instead of pci-bridge. Just swap the device name in the
qemu command line above. The only difference between the two devices
is the pci id. We can match the pci id instead of the device path
diff --git a/docs/system/device-url-syntax.rst.inc b/docs/system/device-url-syntax.rst.inc
index d15a0215087..7dbc525fa80 100644
--- a/docs/system/device-url-syntax.rst.inc
+++ b/docs/system/device-url-syntax.rst.inc
@@ -15,7 +15,7 @@ These are specified using a special URL syntax.
'iqn.2008-11.org.linux-kvm[:<name>]' but this can also be set from
the command line or a configuration file.
- Since version Qemu 2.4 it is possible to specify a iSCSI request
+ Since version QEMU 2.4 it is possible to specify a iSCSI request
timeout to detect stalled requests and force a reestablishment of the
session. The timeout is specified in seconds. The default is 0 which
means no timeout. Libiscsi 1.15.0 or greater is required for this
diff --git a/docs/system/i386/sgx.rst b/docs/system/i386/sgx.rst
index 9aa161af1a1..f8fade5ac2d 100644
--- a/docs/system/i386/sgx.rst
+++ b/docs/system/i386/sgx.rst
@@ -20,13 +20,13 @@ report the same CPUID info to guest as on host for most of SGX CPUID. With
reporting the same CPUID guest is able to use full capacity of SGX, and KVM
doesn't need to emulate those info.
-The guest's EPC base and size are determined by Qemu, and KVM needs Qemu to
+The guest's EPC base and size are determined by QEMU, and KVM needs QEMU to
notify such info to it before it can initialize SGX for guest.
Virtual EPC
~~~~~~~~~~~
-By default, Qemu does not assign EPC to a VM, i.e. fully enabling SGX in a VM
+By default, QEMU does not assign EPC to a VM, i.e. fully enabling SGX in a VM
requires explicit allocation of EPC to the VM. Similar to other specialized
memory types, e.g. hugetlbfs, EPC is exposed as a memory backend.
@@ -35,12 +35,12 @@ prior to realizing the vCPUs themselves, which occurs long before generic
devices are parsed and realized. This limitation means that EPC does not
require -maxmem as EPC is not treated as {cold,hot}plugged memory.
-Qemu does not artificially restrict the number of EPC sections exposed to a
-guest, e.g. Qemu will happily allow you to create 64 1M EPC sections. Be aware
+QEMU does not artificially restrict the number of EPC sections exposed to a
+guest, e.g. QEMU will happily allow you to create 64 1M EPC sections. Be aware
that some kernels may not recognize all EPC sections, e.g. the Linux SGX driver
is hardwired to support only 8 EPC sections.
-The following Qemu snippet creates two EPC sections, with 64M pre-allocated
+The following QEMU snippet creates two EPC sections, with 64M pre-allocated
to the VM and an additional 28M mapped but not allocated::
-object memory-backend-epc,id=mem1,size=64M,prealloc=on \
@@ -54,7 +54,7 @@ to physical EPC. Because physical EPC is protected via range registers,
the size of the physical EPC must be a power of two (though software sees
a subset of the full EPC, e.g. 92M or 128M) and the EPC must be naturally
aligned. KVM SGX's virtual EPC is purely a software construct and only
-requires the size and location to be page aligned. Qemu enforces the EPC
+requires the size and location to be page aligned. QEMU enforces the EPC
size is a multiple of 4k and will ensure the base of the EPC is 4k aligned.
To simplify the implementation, EPC is always located above 4g in the guest
physical address space.
@@ -62,7 +62,7 @@ physical address space.
Migration
~~~~~~~~~
-Qemu/KVM doesn't prevent live migrating SGX VMs, although from hardware's
+QEMU/KVM doesn't prevent live migrating SGX VMs, although from hardware's
perspective, SGX doesn't support live migration, since both EPC and the SGX
key hierarchy are bound to the physical platform. However live migration
can be supported in the sense if guest software stack can support recreating
@@ -76,7 +76,7 @@ CPUID
~~~~~
Due to its myriad dependencies, SGX is currently not listed as supported
-in any of Qemu's built-in CPU configuration. To expose SGX (and SGX Launch
+in any of QEMU's built-in CPU configuration. To expose SGX (and SGX Launch
Control) to a guest, you must either use ``-cpu host`` to pass-through the
host CPU model, or explicitly enable SGX when using a built-in CPU model,
e.g. via ``-cpu <model>,+sgx`` or ``-cpu <model>,+sgx,+sgxlc``.
@@ -101,7 +101,7 @@ controlled via -cpu are prefixed with "sgx", e.g.::
sgx2
sgxlc
-The following Qemu snippet passes through the host CPU but restricts access to
+The following QEMU snippet passes through the host CPU but restricts access to
the provision and EINIT token keys::
-cpu host,-sgx-provisionkey,-sgx-tokenkey
@@ -112,11 +112,11 @@ in hardware cannot be forced on via '-cpu'.
Virtualize SGX Launch Control
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Qemu SGX support for Launch Control (LC) is passive, in the sense that it
-does not actively change the LC configuration. Qemu SGX provides the user
+QEMU SGX support for Launch Control (LC) is passive, in the sense that it
+does not actively change the LC configuration. QEMU SGX provides the user
the ability to set/clear the CPUID flag (and by extension the associated
IA32_FEATURE_CONTROL MSR bit in fw_cfg) and saves/restores the LE Hash MSRs
-when getting/putting guest state, but Qemu does not add new controls to
+when getting/putting guest state, but QEMU does not add new controls to
directly modify the LC configuration. Similar to hardware behavior, locking
the LC configuration to a non-Intel value is left to guest firmware. Unlike
host bios setting for SGX launch control(LC), there is no special bios setting
@@ -126,7 +126,7 @@ creating VM with SGX.
Feature Control
~~~~~~~~~~~~~~~
-Qemu SGX updates the ``etc/msr_feature_control`` fw_cfg entry to set the SGX
+QEMU SGX updates the ``etc/msr_feature_control`` fw_cfg entry to set the SGX
(bit 18) and SGX LC (bit 17) flags based on their respective CPUID support,
i.e. existing guest firmware will automatically set SGX and SGX LC accordingly,
assuming said firmware supports fw_cfg.msr_feature_control.
diff --git a/docs/u2f.txt b/docs/u2f.txt
index 8f44994818a..7f5813a0b72 100644
--- a/docs/u2f.txt
+++ b/docs/u2f.txt
@@ -21,7 +21,7 @@ The second factor is materialized by a device implementing the U2F
protocol. In case of a USB U2F security key, it is a USB HID device
that implements the U2F protocol.
-In Qemu, the USB U2F key device offers a dedicated support of U2F, allowing
+In QEMU, the USB U2F key device offers a dedicated support of U2F, allowing
guest USB FIDO/U2F security keys operating in two possible modes:
pass-through and emulated.
--
2.31.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH-for-6.2? v2 2/3] misc: Spell QEMU all caps
2021-11-19 9:16 [PATCH-for-6.2? v2 0/3] misc: Spell QEMU all caps Philippe Mathieu-Daudé
2021-11-19 9:16 ` [PATCH-for-6.2? v2 1/3] docs: " Philippe Mathieu-Daudé
@ 2021-11-19 9:17 ` Philippe Mathieu-Daudé
2021-11-19 15:43 ` Taylor Simpson
2021-11-19 9:17 ` [PATCH-for-6.2? v2 3/3] qga: " Philippe Mathieu-Daudé
2021-12-15 10:31 ` [PATCH-for-6.2? v2 0/3] misc: " Philippe Mathieu-Daudé
3 siblings, 1 reply; 6+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-11-19 9:17 UTC (permalink / raw)
To: qemu-devel
Cc: Kevin Wolf, Marcelo Tosatti, Eduardo Habkost, qemu-block,
John Snow, Cleber Rosa, Markus Armbruster,
Philippe Mathieu-Daudé, Hanna Reitz,
Vladimir Sementsov-Ogievskiy, kvm, Michael Roth, Paolo Bonzini,
Taylor Simpson, Eric Blake
QEMU should be written all caps.
Normally checkpatch.pl warns when it is not (see commit
9964d8f9422: "checkpatch: Add QEMU specific rule").
Replace Qemu -> QEMU.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
qapi/block-core.json | 2 +-
python/qemu/machine/machine.py | 2 +-
scripts/checkpatch.pl | 2 +-
scripts/render_block_graph.py | 2 +-
scripts/simplebench/bench-backup.py | 4 ++--
scripts/simplebench/bench_block_job.py | 2 +-
target/hexagon/README | 2 +-
tests/guest-debug/run-test.py | 4 ++--
tests/qemu-iotests/testenv.py | 2 +-
9 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/qapi/block-core.json b/qapi/block-core.json
index 1d3dd9cb48e..1846a91873a 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -1839,7 +1839,7 @@
#
# @id: Block graph node identifier. This @id is generated only for
# x-debug-query-block-graph and does not relate to any other identifiers in
-# Qemu.
+# QEMU.
#
# @type: Type of graph node. Can be one of block-backend, block-job or
# block-driver-state.
diff --git a/python/qemu/machine/machine.py b/python/qemu/machine/machine.py
index a487c397459..627c9013946 100644
--- a/python/qemu/machine/machine.py
+++ b/python/qemu/machine/machine.py
@@ -122,7 +122,7 @@ def __init__(self,
@param console_log: (optional) path to console log file
@param log_dir: where to create and keep log files
@param qmp_timer: (optional) default QMP socket timeout
- @note: Qemu process is not started until launch() is used.
+ @note: QEMU process is not started until launch() is used.
'''
# pylint: disable=too-many-arguments
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index cb8eff233e0..aedf9beaed0 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -2910,7 +2910,7 @@ sub process {
ERROR("use QEMU instead of Qemu or QEmu\n" . $herecurr);
}
-# Qemu error function tests
+# QEMU error function tests
# Find newlines in error messages
my $qemu_error_funcs = qr{error_setg|
diff --git a/scripts/render_block_graph.py b/scripts/render_block_graph.py
index da6acf050d1..3147b0b843b 100755
--- a/scripts/render_block_graph.py
+++ b/scripts/render_block_graph.py
@@ -1,6 +1,6 @@
#!/usr/bin/env python3
#
-# Render Qemu Block Graph
+# Render QEMU Block Graph
#
# Copyright (c) 2018 Virtuozzo International GmbH. All rights reserved.
#
diff --git a/scripts/simplebench/bench-backup.py b/scripts/simplebench/bench-backup.py
index 5a0675c593c..ad37af3e719 100755
--- a/scripts/simplebench/bench-backup.py
+++ b/scripts/simplebench/bench-backup.py
@@ -183,7 +183,7 @@ def __call__(self, parser, namespace, values, option_string=None):
mirror use mirror job instead of backup''',
formatter_class=argparse.RawTextHelpFormatter)
p.add_argument('--env', nargs='+', help='''\
-Qemu binaries with labels and options, see below
+QEMU binaries with labels and options, see below
"ENV format" section''',
action=ExtendAction)
p.add_argument('--dir', nargs='+', help='''\
@@ -209,7 +209,7 @@ def __call__(self, parser, namespace, values, option_string=None):
p.add_argument('--target-cache', help='''\
Setup cache for target nodes. Options:
direct: default, use O_DIRECT and aio=native
- cached: use system cache (Qemu default) and aio=threads (Qemu default)
+ cached: use system cache (QEMU default) and aio=threads (QEMU default)
both: generate two test cases for each src:dst pair''',
default='direct', choices=('direct', 'cached', 'both'))
diff --git a/scripts/simplebench/bench_block_job.py b/scripts/simplebench/bench_block_job.py
index a403c35b08f..ecbcd535bcb 100755
--- a/scripts/simplebench/bench_block_job.py
+++ b/scripts/simplebench/bench_block_job.py
@@ -36,7 +36,7 @@ def bench_block_job(cmd, cmd_args, qemu_args):
cmd -- qmp command to run block-job (like blockdev-backup)
cmd_args -- dict of qmp command arguments
- qemu_args -- list of Qemu command line arguments, including path to Qemu
+ qemu_args -- list of QEMU command line arguments, including path to QEMU
binary
Returns {'seconds': int} on success and {'error': str} on failure, dict may
diff --git a/target/hexagon/README b/target/hexagon/README
index 372e24747c9..b02dbbd1701 100644
--- a/target/hexagon/README
+++ b/target/hexagon/README
@@ -48,7 +48,7 @@ header files in <BUILD_DIR>/target/hexagon
gen_tcg_func_table.py -> tcg_func_table_generated.c.inc
gen_helper_funcs.py -> helper_funcs_generated.c.inc
-Qemu helper functions have 3 parts
+QEMU helper functions have 3 parts
DEF_HELPER declaration indicates the signature of the helper
gen_helper_<NAME> will generate a TCG call to the helper function
The helper implementation
diff --git a/tests/guest-debug/run-test.py b/tests/guest-debug/run-test.py
index 2e58795a100..268a230ecc3 100755
--- a/tests/guest-debug/run-test.py
+++ b/tests/guest-debug/run-test.py
@@ -21,9 +21,9 @@
def get_args():
parser = argparse.ArgumentParser(description="A gdbstub test runner")
- parser.add_argument("--qemu", help="Qemu binary for test",
+ parser.add_argument("--qemu", help="QEMU binary for test",
required=True)
- parser.add_argument("--qargs", help="Qemu arguments for test")
+ parser.add_argument("--qargs", help="QEMU arguments for test")
parser.add_argument("--binary", help="Binary to debug",
required=True)
parser.add_argument("--test", help="GDB test script",
diff --git a/tests/qemu-iotests/testenv.py b/tests/qemu-iotests/testenv.py
index c33454fa685..b563b6d5e6d 100644
--- a/tests/qemu-iotests/testenv.py
+++ b/tests/qemu-iotests/testenv.py
@@ -157,7 +157,7 @@ def root(*names: str) -> str:
progs = sorted(glob.iglob(pattern))
self.qemu_prog = next(p for p in progs if isxfile(p))
except StopIteration:
- sys.exit("Not found any Qemu executable binary by pattern "
+ sys.exit("Not found any QEMU executable binary by pattern "
f"'{pattern}'")
self.qemu_img_prog = os.getenv('QEMU_IMG_PROG', root('qemu-img'))
--
2.31.1
^ permalink raw reply related [flat|nested] 6+ messages in thread