qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Juan Quintela <quintela@redhat.com>
To: qemu-devel@nongnu.org
Cc: Leonardo Bras <leobras@redhat.com>,
	"Dr. David Alan Gilbert" <dgilbert@redhat.com>,
	Peter Xu <peterx@redhat.com>, Juan Quintela <quintela@redhat.com>
Subject: [PATCH v3 18/23] multifd: Use normal pages array on the recv side
Date: Wed, 24 Nov 2021 11:06:12 +0100	[thread overview]
Message-ID: <20211124100617.19786-19-quintela@redhat.com> (raw)
In-Reply-To: <20211124100617.19786-1-quintela@redhat.com>

Signed-off-by: Juan Quintela <quintela@redhat.com>
---
 migration/multifd.h      |  8 +++++--
 migration/multifd-zlib.c |  8 +++----
 migration/multifd-zstd.c |  6 +++---
 migration/multifd.c      | 45 ++++++++++++++++++----------------------
 4 files changed, 33 insertions(+), 34 deletions(-)

diff --git a/migration/multifd.h b/migration/multifd.h
index 78e73df3ec..9fbcb7bb9a 100644
--- a/migration/multifd.h
+++ b/migration/multifd.h
@@ -151,12 +151,16 @@ typedef struct {
     uint32_t next_packet_size;
     /* packets sent through this channel */
     uint64_t num_packets;
-    /* pages sent through this channel */
-    uint64_t num_pages;
+    /* non zero pages sent through this channel */
+    uint64_t num_normal_pages;
     /* syncs main thread and channels */
     QemuSemaphore sem_sync;
     /* buffers to recv */
     struct iovec *iov;
+    /* Pages that are not zero */
+    ram_addr_t *normal;
+    /* num of non zero pages */
+    uint32_t normal_num;
     /* used for de-compression methods */
     void *data;
 } MultiFDRecvParams;
diff --git a/migration/multifd-zlib.c b/migration/multifd-zlib.c
index 25ef68a548..cc143b829d 100644
--- a/migration/multifd-zlib.c
+++ b/migration/multifd-zlib.c
@@ -225,7 +225,7 @@ static int zlib_recv_pages(MultiFDRecvParams *p, Error **errp)
     uint32_t in_size = p->next_packet_size;
     /* we measure the change of total_out */
     uint32_t out_size = zs->total_out;
-    uint32_t expected_size = p->pages->num * qemu_target_page_size();
+    uint32_t expected_size = p->normal_num * page_size;
     uint32_t flags = p->flags & MULTIFD_FLAG_COMPRESSION_MASK;
     int ret;
     int i;
@@ -244,16 +244,16 @@ static int zlib_recv_pages(MultiFDRecvParams *p, Error **errp)
     zs->avail_in = in_size;
     zs->next_in = z->zbuff;
 
-    for (i = 0; i < p->pages->num; i++) {
+    for (i = 0; i < p->normal_num; i++) {
         int flush = Z_NO_FLUSH;
         unsigned long start = zs->total_out;
 
-        if (i == p->pages->num - 1) {
+        if (i == p->normal_num - 1) {
             flush = Z_SYNC_FLUSH;
         }
 
         zs->avail_out = page_size;
-        zs->next_out = p->pages->block->host + p->pages->offset[i];
+        zs->next_out = p->pages->block->host + p->normal[i];
 
         /*
          * Welcome to inflate semantics
diff --git a/migration/multifd-zstd.c b/migration/multifd-zstd.c
index 61842d713e..93d504ce0f 100644
--- a/migration/multifd-zstd.c
+++ b/migration/multifd-zstd.c
@@ -242,7 +242,7 @@ static int zstd_recv_pages(MultiFDRecvParams *p, Error **errp)
     uint32_t in_size = p->next_packet_size;
     uint32_t out_size = 0;
     size_t page_size = qemu_target_page_size();
-    uint32_t expected_size = p->pages->num * page_size;
+    uint32_t expected_size = p->normal_num * page_size;
     uint32_t flags = p->flags & MULTIFD_FLAG_COMPRESSION_MASK;
     struct zstd_data *z = p->data;
     int ret;
@@ -263,8 +263,8 @@ static int zstd_recv_pages(MultiFDRecvParams *p, Error **errp)
     z->in.size = in_size;
     z->in.pos = 0;
 
-    for (i = 0; i < p->pages->num; i++) {
-        z->out.dst = p->pages->block->host + p->pages->offset[i];
+    for (i = 0; i < p->normal_num; i++) {
+        z->out.dst = p->pages->block->host + p->normal[i];
         z->out.size = page_size;
         z->out.pos = 0;
 
diff --git a/migration/multifd.c b/migration/multifd.c
index dbe919b764..3ffb1aba64 100644
--- a/migration/multifd.c
+++ b/migration/multifd.c
@@ -146,11 +146,11 @@ static int nocomp_recv_pages(MultiFDRecvParams *p, Error **errp)
                    p->id, flags, MULTIFD_FLAG_NOCOMP);
         return -1;
     }
-    for (int i = 0; i < p->pages->num; i++) {
-        p->iov[i].iov_base = p->pages->block->host + p->pages->offset[i];
+    for (int i = 0; i < p->normal_num; i++) {
+        p->iov[i].iov_base = p->pages->block->host + p->normal[i];
         p->iov[i].iov_len = page_size;
     }
-    return qio_channel_readv_all(p->c, p->iov, p->pages->num, errp);
+    return qio_channel_readv_all(p->c, p->iov, p->normal_num, errp);
 }
 
 static MultiFDMethods multifd_nocomp_ops = {
@@ -282,7 +282,7 @@ static int multifd_recv_unfill_packet(MultiFDRecvParams *p, Error **errp)
 {
     MultiFDPacket_t *packet = p->packet;
     size_t page_size = qemu_target_page_size();
-    uint32_t pages_max = MULTIFD_PACKET_SIZE / page_size;
+    uint32_t page_count = MULTIFD_PACKET_SIZE / page_size;
     RAMBlock *block;
     int i;
 
@@ -309,33 +309,25 @@ static int multifd_recv_unfill_packet(MultiFDRecvParams *p, Error **errp)
      * If we received a packet that is 100 times bigger than expected
      * just stop migration.  It is a magic number.
      */
-    if (packet->pages_alloc > pages_max * 100) {
+    if (packet->pages_alloc > page_count) {
         error_setg(errp, "multifd: received packet "
-                   "with size %d and expected a maximum size of %d",
-                   packet->pages_alloc, pages_max * 100) ;
+                   "with size %d and expected a size of %d",
+                   packet->pages_alloc, page_count) ;
         return -1;
     }
-    /*
-     * We received a packet that is bigger than expected but inside
-     * reasonable limits (see previous comment).  Just reallocate.
-     */
-    if (packet->pages_alloc > p->pages->allocated) {
-        multifd_pages_clear(p->pages);
-        p->pages = multifd_pages_init(packet->pages_alloc);
-    }
 
-    p->pages->num = be32_to_cpu(packet->pages_used);
-    if (p->pages->num > packet->pages_alloc) {
+    p->normal_num = be32_to_cpu(packet->pages_used);
+    if (p->normal_num > packet->pages_alloc) {
         error_setg(errp, "multifd: received packet "
                    "with %d pages and expected maximum pages are %d",
-                   p->pages->num, packet->pages_alloc) ;
+                   p->normal_num, packet->pages_alloc) ;
         return -1;
     }
 
     p->next_packet_size = be32_to_cpu(packet->next_packet_size);
     p->packet_num = be64_to_cpu(packet->packet_num);
 
-    if (p->pages->num == 0) {
+    if (p->normal_num == 0) {
         return 0;
     }
 
@@ -349,7 +341,7 @@ static int multifd_recv_unfill_packet(MultiFDRecvParams *p, Error **errp)
     }
 
     p->pages->block = block;
-    for (i = 0; i < p->pages->num; i++) {
+    for (i = 0; i < p->normal_num; i++) {
         uint64_t offset = be64_to_cpu(packet->offset[i]);
 
         if (offset > (block->used_length - page_size)) {
@@ -358,7 +350,7 @@ static int multifd_recv_unfill_packet(MultiFDRecvParams *p, Error **errp)
                        offset, block->used_length);
             return -1;
         }
-        p->pages->offset[i] = offset;
+        p->normal[i] = offset;
     }
 
     return 0;
@@ -1019,6 +1011,8 @@ int multifd_load_cleanup(Error **errp)
         p->packet = NULL;
         g_free(p->iov);
         p->iov = NULL;
+        g_free(p->normal);
+        p->normal = NULL;
         multifd_recv_state->ops->recv_cleanup(p);
     }
     qemu_sem_destroy(&multifd_recv_state->sem_sync);
@@ -1092,13 +1086,13 @@ static void *multifd_recv_thread(void *opaque)
         flags = p->flags;
         /* recv methods don't know how to handle the SYNC flag */
         p->flags &= ~MULTIFD_FLAG_SYNC;
-        trace_multifd_recv(p->id, p->packet_num, p->pages->num, flags,
+        trace_multifd_recv(p->id, p->packet_num, p->normal_num, flags,
                            p->next_packet_size);
         p->num_packets++;
-        p->num_pages += p->pages->num;
+        p->num_normal_pages += p->normal_num;
         qemu_mutex_unlock(&p->mutex);
 
-        if (p->pages->num) {
+        if (p->normal_num) {
             ret = multifd_recv_state->ops->recv_pages(p, &local_err);
             if (ret != 0) {
                 break;
@@ -1120,7 +1114,7 @@ static void *multifd_recv_thread(void *opaque)
     qemu_mutex_unlock(&p->mutex);
 
     rcu_unregister_thread();
-    trace_multifd_recv_thread_end(p->id, p->num_packets, p->num_pages);
+    trace_multifd_recv_thread_end(p->id, p->num_packets, p->num_normal_pages);
 
     return NULL;
 }
@@ -1158,6 +1152,7 @@ int multifd_load_setup(Error **errp)
         p->packet = g_malloc0(p->packet_len);
         p->name = g_strdup_printf("multifdrecv_%d", i);
         p->iov = g_new0(struct iovec, page_count);
+        p->normal = g_new0(ram_addr_t, page_count);
     }
 
     for (i = 0; i < thread_count; i++) {
-- 
2.33.1



  parent reply	other threads:[~2021-11-24 10:37 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-24 10:05 [PATCH v3 00/23] Migration: Transmit and detect zero pages in the multifd threads Juan Quintela
2021-11-24 10:05 ` [PATCH v3 01/23] multifd: Delete useless operation Juan Quintela
2021-11-24 18:48   ` Dr. David Alan Gilbert
2021-11-25  7:24     ` Juan Quintela
2021-11-25 19:46       ` Dr. David Alan Gilbert
2021-11-26  9:39         ` Juan Quintela
2021-11-24 10:05 ` [PATCH v3 02/23] migration: Never call twice qemu_target_page_size() Juan Quintela
2021-11-24 18:52   ` Dr. David Alan Gilbert
2021-11-25  7:26     ` Juan Quintela
2021-11-24 10:05 ` [PATCH v3 03/23] multifd: Rename used field to num Juan Quintela
2021-11-24 19:37   ` Dr. David Alan Gilbert
2021-11-25  7:28     ` Juan Quintela
2021-11-25 18:30       ` Dr. David Alan Gilbert
2021-12-13  9:34   ` Zheng Chuan via
2021-12-13 15:17     ` Dr. David Alan Gilbert
2021-11-24 10:05 ` [PATCH v3 04/23] multifd: Add missing documention Juan Quintela
2021-11-25 18:38   ` Dr. David Alan Gilbert
2021-11-26  9:34     ` Juan Quintela
2021-11-24 10:05 ` [PATCH v3 05/23] multifd: The variable is only used inside the loop Juan Quintela
2021-11-25 18:40   ` Dr. David Alan Gilbert
2021-11-24 10:06 ` [PATCH v3 06/23] multifd: remove used parameter from send_prepare() method Juan Quintela
2021-11-25 18:51   ` Dr. David Alan Gilbert
2021-11-24 10:06 ` [PATCH v3 07/23] multifd: remove used parameter from send_recv_pages() method Juan Quintela
2021-11-25 18:53   ` Dr. David Alan Gilbert
2021-11-24 10:06 ` [PATCH v3 08/23] multifd: Fill offset and block for reception Juan Quintela
2021-11-25 19:41   ` Dr. David Alan Gilbert
2021-11-24 10:06 ` [PATCH v3 09/23] multifd: Make zstd compression method not use iovs Juan Quintela
2021-11-29 17:16   ` Dr. David Alan Gilbert
2021-11-24 10:06 ` [PATCH v3 10/23] multifd: Make zlib " Juan Quintela
2021-11-29 17:30   ` Dr. David Alan Gilbert
2021-11-24 10:06 ` [PATCH v3 11/23] multifd: Move iov from pages to params Juan Quintela
2021-11-29 17:52   ` Dr. David Alan Gilbert
2021-11-24 10:06 ` [PATCH v3 12/23] multifd: Make zlib use iov's Juan Quintela
2021-11-29 18:01   ` Dr. David Alan Gilbert
2021-11-29 18:21     ` Juan Quintela
2021-11-24 10:06 ` [PATCH v3 13/23] multifd: Make zstd " Juan Quintela
2021-11-29 18:03   ` Dr. David Alan Gilbert
2021-11-24 10:06 ` [PATCH v3 14/23] multifd: Remove send_write() method Juan Quintela
2021-11-29 18:19   ` Dr. David Alan Gilbert
2021-11-24 10:06 ` [PATCH v3 15/23] multifd: Use a single writev on the send side Juan Quintela
2021-11-29 18:35   ` Dr. David Alan Gilbert
2021-11-24 10:06 ` [PATCH v3 16/23] multifd: Unfold "used" variable by its value Juan Quintela
2021-11-30 10:45   ` Dr. David Alan Gilbert
2021-11-24 10:06 ` [PATCH v3 17/23] multifd: Use normal pages array on the send side Juan Quintela
2021-11-30 10:50   ` Dr. David Alan Gilbert
2021-11-30 12:01     ` Juan Quintela
2021-12-01 10:59       ` Dr. David Alan Gilbert
2021-11-24 10:06 ` Juan Quintela [this message]
2021-12-07  7:11   ` [PATCH v3 18/23] multifd: Use normal pages array on the recv side Peter Xu
2021-12-10 10:41     ` Juan Quintela
2021-11-24 10:06 ` [PATCH v3 19/23] multifd: recv side only needs the RAMBlock host address Juan Quintela
2021-12-01 18:56   ` Dr. David Alan Gilbert
2021-11-24 10:06 ` [PATCH v3 20/23] multifd: Rename pages_used to normal_pages Juan Quintela
2021-12-01 19:00   ` Dr. David Alan Gilbert
2021-11-24 10:06 ` [PATCH v3 21/23] multifd: Support for zero pages transmission Juan Quintela
2021-12-02 11:36   ` Dr. David Alan Gilbert
2021-12-02 12:08     ` Juan Quintela
2021-12-02 16:16       ` Dr. David Alan Gilbert
2021-12-02 16:19         ` Juan Quintela
2021-12-02 16:46           ` Dr. David Alan Gilbert
2021-12-02 16:52             ` Juan Quintela
2021-11-24 10:06 ` [PATCH v3 22/23] multifd: Zero " Juan Quintela
2021-12-02 16:42   ` Dr. David Alan Gilbert
2021-12-02 16:49     ` Juan Quintela
2021-11-24 10:06 ` [PATCH v3 23/23] migration: Use multifd before we check for the zero page Juan Quintela
2021-12-02 17:11   ` Dr. David Alan Gilbert
2021-12-02 17:38     ` Juan Quintela
2021-12-02 17:49       ` Dr. David Alan Gilbert
2021-12-07  7:30       ` Peter Xu
2021-12-13  9:03         ` Juan Quintela
2021-12-15  1:39           ` Peter Xu
2021-11-24 10:24 ` [PATCH v3 00/23] Migration: Transmit and detect zero pages in the multifd threads Peter Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211124100617.19786-19-quintela@redhat.com \
    --to=quintela@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=leobras@redhat.com \
    --cc=peterx@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).