[PULL 4/8] s390x/pci: don't use hard-coded dma range in reg_ioat

[Thomas Huth <thuth@redhat.com>]

From: Matthew Rosato <mjrosato@linux.ibm.com>

Instead use the values from clp info, they will either be the hard-coded
values or what came from the host driver via vfio.

Fixes: 9670ee752727 ("s390x/pci: use a PCI Function structure")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20211203142706.427279-3-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 hw/s390x/s390-pci-inst.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c
index 1c8ad91175..11b7f6bfa1 100644
--- a/hw/s390x/s390-pci-inst.c
+++ b/hw/s390x/s390-pci-inst.c
@@ -916,9 +916,10 @@ int pci_dereg_irqs(S390PCIBusDevice *pbdev)
     return 0;
 }
 
-static int reg_ioat(CPUS390XState *env, S390PCIIOMMU *iommu, ZpciFib fib,
+static int reg_ioat(CPUS390XState *env, S390PCIBusDevice *pbdev, ZpciFib fib,
                     uintptr_t ra)
 {
+    S390PCIIOMMU *iommu = pbdev->iommu;
     uint64_t pba = ldq_p(&fib.pba);
     uint64_t pal = ldq_p(&fib.pal);
     uint64_t g_iota = ldq_p(&fib.iota);
@@ -927,7 +928,7 @@ static int reg_ioat(CPUS390XState *env, S390PCIIOMMU *iommu, ZpciFib fib,
 
     pba &= ~0xfff;
     pal |= 0xfff;
-    if (pba > pal || pba < ZPCI_SDMA_ADDR || pal > ZPCI_EDMA_ADDR) {
+    if (pba > pal || pba < pbdev->zpci_fn.sdma || pal > pbdev->zpci_fn.edma) {
         s390_program_interrupt(env, PGM_OPERAND, ra);
         return -EINVAL;
     }
@@ -1125,7 +1126,7 @@ int mpcifc_service_call(S390CPU *cpu, uint8_t r1, uint64_t fiba, uint8_t ar,
         } else if (pbdev->iommu->enabled) {
             cc = ZPCI_PCI_LS_ERR;
             s390_set_status_code(env, r1, ZPCI_MOD_ST_SEQUENCE);
-        } else if (reg_ioat(env, pbdev->iommu, fib, ra)) {
+        } else if (reg_ioat(env, pbdev, fib, ra)) {
             cc = ZPCI_PCI_LS_ERR;
             s390_set_status_code(env, r1, ZPCI_MOD_ST_INSUF_RES);
         }
@@ -1150,7 +1151,7 @@ int mpcifc_service_call(S390CPU *cpu, uint8_t r1, uint64_t fiba, uint8_t ar,
             s390_set_status_code(env, r1, ZPCI_MOD_ST_SEQUENCE);
         } else {
             pci_dereg_ioat(pbdev->iommu);
-            if (reg_ioat(env, pbdev->iommu, fib, ra)) {
+            if (reg_ioat(env, pbdev, fib, ra)) {
                 cc = ZPCI_PCI_LS_ERR;
                 s390_set_status_code(env, r1, ZPCI_MOD_ST_INSUF_RES);
             }
-- 
2.27.0