From: "Philippe Mathieu-Daudé" <philmd@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Daniel Henrique Barboza" <danielhb413@gmail.com>,
"Michael S. Tsirkin" <mst@redhat.com>,
"David Hildenbrand" <david@redhat.com>,
"Li Qiang" <liq3ea@gmail.com>,
"Qiuhao Li" <Qiuhao.Li@outlook.com>,
"Peter Xu" <peterx@redhat.com>, "Greg Kurz" <groug@kaod.org>,
"Alexander Bulekov" <alxndr@bu.edu>,
qemu-ppc@nongnu.org, "Cédric Le Goater" <clg@kaod.org>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"David Gibson" <david@gibson.dropbear.id.au>,
"Philippe Mathieu-Daudé" <philmd@redhat.com>,
"Gerd Hoffmann" <kraxel@redhat.com>
Subject: [PATCH 2/4] dma: Let ld*_dma() take MemTxAttrs argument
Date: Sat, 18 Dec 2021 15:51:09 +0100 [thread overview]
Message-ID: <20211218145111.1540114-3-philmd@redhat.com> (raw)
In-Reply-To: <20211218145111.1540114-1-philmd@redhat.com>
Let devices specify transaction attributes when calling ld*_dma().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
include/hw/pci/pci.h | 3 ++-
include/hw/ppc/spapr_vio.h | 3 ++-
include/sysemu/dma.h | 11 ++++++-----
hw/intc/pnv_xive.c | 7 ++++---
hw/usb/hcd-xhci.c | 6 +++---
5 files changed, 17 insertions(+), 13 deletions(-)
diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
index d07e9707b48..0613308b1b6 100644
--- a/include/hw/pci/pci.h
+++ b/include/hw/pci/pci.h
@@ -854,7 +854,8 @@ static inline MemTxResult pci_dma_write(PCIDevice *dev, dma_addr_t addr,
static inline uint##_bits##_t ld##_l##_pci_dma(PCIDevice *dev, \
dma_addr_t addr) \
{ \
- return ld##_l##_dma(pci_get_address_space(dev), addr); \
+ return ld##_l##_dma(pci_get_address_space(dev), addr, \
+ MEMTXATTRS_UNSPECIFIED); \
} \
static inline void st##_s##_pci_dma(PCIDevice *dev, \
dma_addr_t addr, uint##_bits##_t val) \
diff --git a/include/hw/ppc/spapr_vio.h b/include/hw/ppc/spapr_vio.h
index e87f8e6f596..d2ec9b0637f 100644
--- a/include/hw/ppc/spapr_vio.h
+++ b/include/hw/ppc/spapr_vio.h
@@ -126,7 +126,8 @@ static inline int spapr_vio_dma_set(SpaprVioDevice *dev, uint64_t taddr,
(stl_be_dma(&(_dev)->as, (_addr), (_val), MEMTXATTRS_UNSPECIFIED))
#define vio_stq(_dev, _addr, _val) \
(stq_be_dma(&(_dev)->as, (_addr), (_val), MEMTXATTRS_UNSPECIFIED))
-#define vio_ldq(_dev, _addr) (ldq_be_dma(&(_dev)->as, (_addr)))
+#define vio_ldq(_dev, _addr) \
+ (ldq_be_dma(&(_dev)->as, (_addr), MEMTXATTRS_UNSPECIFIED))
int spapr_vio_send_crq(SpaprVioDevice *dev, uint8_t *crq);
diff --git a/include/sysemu/dma.h b/include/sysemu/dma.h
index 2a60d2c5d61..b711d390a4f 100644
--- a/include/sysemu/dma.h
+++ b/include/sysemu/dma.h
@@ -242,10 +242,11 @@ static inline void dma_memory_unmap(AddressSpace *as,
#define DEFINE_LDST_DMA(_lname, _sname, _bits, _end) \
static inline uint##_bits##_t ld##_lname##_##_end##_dma(AddressSpace *as, \
- dma_addr_t addr) \
+ dma_addr_t addr, \
+ MemTxAttrs attrs) \
{ \
uint##_bits##_t val; \
- dma_memory_read(as, addr, &val, (_bits) / 8, MEMTXATTRS_UNSPECIFIED); \
+ dma_memory_read(as, addr, &val, (_bits) / 8, attrs); \
return _end##_bits##_to_cpu(val); \
} \
static inline void st##_sname##_##_end##_dma(AddressSpace *as, \
@@ -254,14 +255,14 @@ static inline void dma_memory_unmap(AddressSpace *as,
MemTxAttrs attrs) \
{ \
val = cpu_to_##_end##_bits(val); \
- dma_memory_write(as, addr, &val, (_bits) / 8, attrs); \
+ dma_memory_write(as, addr, &val, (_bits) / 8, attrs); \
}
-static inline uint8_t ldub_dma(AddressSpace *as, dma_addr_t addr)
+static inline uint8_t ldub_dma(AddressSpace *as, dma_addr_t addr, MemTxAttrs attrs)
{
uint8_t val;
- dma_memory_read(as, addr, &val, 1, MEMTXATTRS_UNSPECIFIED);
+ dma_memory_read(as, addr, &val, 1, attrs);
return val;
}
diff --git a/hw/intc/pnv_xive.c b/hw/intc/pnv_xive.c
index ad43483612e..d9249bbc0c1 100644
--- a/hw/intc/pnv_xive.c
+++ b/hw/intc/pnv_xive.c
@@ -172,7 +172,7 @@ static uint64_t pnv_xive_vst_addr_indirect(PnvXive *xive, uint32_t type,
/* Get the page size of the indirect table. */
vsd_addr = vsd & VSD_ADDRESS_MASK;
- vsd = ldq_be_dma(&address_space_memory, vsd_addr);
+ vsd = ldq_be_dma(&address_space_memory, vsd_addr, MEMTXATTRS_UNSPECIFIED);
if (!(vsd & VSD_ADDRESS_MASK)) {
#ifdef XIVE_DEBUG
@@ -195,7 +195,8 @@ static uint64_t pnv_xive_vst_addr_indirect(PnvXive *xive, uint32_t type,
/* Load the VSD we are looking for, if not already done */
if (vsd_idx) {
vsd_addr = vsd_addr + vsd_idx * XIVE_VSD_SIZE;
- vsd = ldq_be_dma(&address_space_memory, vsd_addr);
+ vsd = ldq_be_dma(&address_space_memory, vsd_addr,
+ MEMTXATTRS_UNSPECIFIED);
if (!(vsd & VSD_ADDRESS_MASK)) {
#ifdef XIVE_DEBUG
@@ -542,7 +543,7 @@ static uint64_t pnv_xive_vst_per_subpage(PnvXive *xive, uint32_t type)
/* Get the page size of the indirect table. */
vsd_addr = vsd & VSD_ADDRESS_MASK;
- vsd = ldq_be_dma(&address_space_memory, vsd_addr);
+ vsd = ldq_be_dma(&address_space_memory, vsd_addr, MEMTXATTRS_UNSPECIFIED);
if (!(vsd & VSD_ADDRESS_MASK)) {
#ifdef XIVE_DEBUG
diff --git a/hw/usb/hcd-xhci.c b/hw/usb/hcd-xhci.c
index ed2b9ea456e..d960b814587 100644
--- a/hw/usb/hcd-xhci.c
+++ b/hw/usb/hcd-xhci.c
@@ -2062,7 +2062,7 @@ static TRBCCode xhci_address_slot(XHCIState *xhci, unsigned int slotid,
assert(slotid >= 1 && slotid <= xhci->numslots);
dcbaap = xhci_addr64(xhci->dcbaap_low, xhci->dcbaap_high);
- poctx = ldq_le_dma(xhci->as, dcbaap + 8 * slotid);
+ poctx = ldq_le_dma(xhci->as, dcbaap + 8 * slotid, MEMTXATTRS_UNSPECIFIED);
ictx = xhci_mask64(pictx);
octx = xhci_mask64(poctx);
@@ -3437,8 +3437,8 @@ static int usb_xhci_post_load(void *opaque, int version_id)
if (!slot->addressed) {
continue;
}
- slot->ctx =
- xhci_mask64(ldq_le_dma(xhci->as, dcbaap + 8 * slotid));
+ slot->ctx = xhci_mask64(ldq_le_dma(xhci->as, dcbaap + 8 * slotid,
+ MEMTXATTRS_UNSPECIFIED));
xhci_dma_read_u32s(xhci, slot->ctx, slot_ctx, sizeof(slot_ctx));
slot->uport = xhci_lookup_uport(xhci, slot_ctx);
if (!slot->uport) {
--
2.33.1
next prev parent reply other threads:[~2021-12-18 14:53 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-18 14:51 [PATCH 0/4] hw: Have DMA API take MemTxAttrs arg & propagate MemTxResult (part 3) Philippe Mathieu-Daudé
2021-12-18 14:51 ` [PATCH 1/4] dma: Let st*_dma() take MemTxAttrs argument Philippe Mathieu-Daudé
2021-12-21 23:05 ` Richard Henderson
2021-12-22 6:44 ` Cédric Le Goater
2021-12-18 14:51 ` Philippe Mathieu-Daudé [this message]
2021-12-21 23:06 ` [PATCH 2/4] dma: Let ld*_dma() " Richard Henderson
2021-12-22 6:44 ` Cédric Le Goater
2021-12-18 14:51 ` [PATCH 3/4] dma: Let st*_dma() propagate MemTxResult Philippe Mathieu-Daudé
2021-12-21 23:07 ` Richard Henderson
2021-12-22 6:45 ` Cédric Le Goater
2021-12-18 14:51 ` [PATCH 4/4] dma: Let ld*_dma() " Philippe Mathieu-Daudé
2021-12-21 23:09 ` Richard Henderson
2021-12-22 6:45 ` Cédric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211218145111.1540114-3-philmd@redhat.com \
--to=philmd@redhat.com \
--cc=Qiuhao.Li@outlook.com \
--cc=alxndr@bu.edu \
--cc=clg@kaod.org \
--cc=danielhb413@gmail.com \
--cc=david@gibson.dropbear.id.au \
--cc=david@redhat.com \
--cc=groug@kaod.org \
--cc=kraxel@redhat.com \
--cc=liq3ea@gmail.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peterx@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).