From: Alistair Francis <alistair.francis@opensource.wdc.com>
To: qemu-devel@nongnu.org
Cc: alistair23@gmail.com,
"Philipp Tomsich" <philipp.tomsich@vrull.eu>,
"Bin Meng" <bmeng.cn@gmail.com>,
"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
"Alistair Francis" <alistair.francis@wdc.com>
Subject: [PULL 16/37] target/riscv: Fix position of 'experimental' comment
Date: Sat, 8 Jan 2022 15:50:27 +1000 [thread overview]
Message-ID: <20220108055048.3512645-17-alistair.francis@opensource.wdc.com> (raw)
In-Reply-To: <20220108055048.3512645-1-alistair.francis@opensource.wdc.com>
From: Philipp Tomsich <philipp.tomsich@vrull.eu>
When commit 0643c12e4b dropped the 'x-' prefix for Zb[abcs] and set
them to be enabled by default, the comment about experimental
extensions was kept in place above them. This moves it down a few
lines to only cover experimental extensions.
References: 0643c12e4b ("target/riscv: Enable bitmanip Zb[abcs] instructions")
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106134020.1628889-1-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
target/riscv/cpu.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 29749e834f..ce21c1b5b1 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -641,11 +641,12 @@ static Property riscv_cpu_properties[] = {
DEFINE_PROP_UINT16("vlen", RISCVCPU, cfg.vlen, 128),
DEFINE_PROP_UINT16("elen", RISCVCPU, cfg.elen, 64),
- /* These are experimental so mark with 'x-' */
DEFINE_PROP_BOOL("zba", RISCVCPU, cfg.ext_zba, true),
DEFINE_PROP_BOOL("zbb", RISCVCPU, cfg.ext_zbb, true),
DEFINE_PROP_BOOL("zbc", RISCVCPU, cfg.ext_zbc, true),
DEFINE_PROP_BOOL("zbs", RISCVCPU, cfg.ext_zbs, true),
+
+ /* These are experimental so mark with 'x-' */
DEFINE_PROP_BOOL("x-j", RISCVCPU, cfg.ext_j, false),
/* ePMP 0.9.3 */
DEFINE_PROP_BOOL("x-epmp", RISCVCPU, cfg.epmp, false),
--
2.31.1
next prev parent reply other threads:[~2022-01-08 6:56 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-08 5:50 [PULL 00/37] riscv-to-apply queue Alistair Francis
2022-01-08 5:50 ` [PULL 01/37] target/riscv/pmp: fix no pmp illegal intrs Alistair Francis
2022-01-08 5:50 ` [PULL 02/37] hw/dma: sifive_pdma: support high 32-bit access of 64-bit register Alistair Francis
2022-01-08 5:50 ` [PULL 03/37] hw/dma: sifive_pdma: permit 4/8-byte access size of PDMA registers Alistair Francis
2022-01-08 5:50 ` [PULL 04/37] hw/intc: sifive_plic: Add a reset function Alistair Francis
2022-01-08 5:50 ` [PULL 05/37] hw/intc: sifive_plic: Cleanup the write function Alistair Francis
2022-01-08 5:50 ` [PULL 06/37] hw/intc: sifive_plic: Cleanup the read function Alistair Francis
2022-01-08 5:50 ` [PULL 07/37] hw/intc: sifive_plic: Cleanup remaining functions Alistair Francis
2022-01-08 5:50 ` [PULL 08/37] target/riscv: Mark the Hypervisor extension as non experimental Alistair Francis
2022-01-08 5:50 ` [PULL 09/37] target/riscv: Enable the Hypervisor extension by default Alistair Francis
2022-01-08 5:50 ` [PULL 10/37] hw/riscv: Use error_fatal for SoC realisation Alistair Francis
2022-01-08 5:50 ` [PULL 11/37] hw/riscv: virt: Allow support for 32 cores Alistair Francis
2022-01-08 5:50 ` [PULL 12/37] roms/opensbi: Upgrade from v0.9 to v1.0 Alistair Francis
2022-01-08 5:50 ` [PULL 13/37] target/riscv: rvv-1.0: Call the correct RVF/RVD check function for widening fp insns Alistair Francis
2022-01-08 5:50 ` [PULL 14/37] target/riscv: rvv-1.0: Call the correct RVF/RVD check function for widening fp/int type-convert insns Alistair Francis
2022-01-08 5:50 ` [PULL 15/37] target/riscv: rvv-1.0: Call the correct RVF/RVD check function for narrowing " Alistair Francis
2022-01-08 5:50 ` Alistair Francis [this message]
2022-01-08 5:50 ` [PULL 17/37] exec/memop: Adding signedness to quad definitions Alistair Francis
2022-01-08 5:50 ` [PULL 18/37] exec/memop: Adding signed quad and octo defines Alistair Francis
2022-01-08 5:50 ` [PULL 19/37] qemu/int128: addition of div/rem 128-bit operations Alistair Francis
2022-01-08 5:50 ` [PULL 20/37] target/riscv: additional macros to check instruction support Alistair Francis
2022-01-08 5:50 ` [PULL 21/37] target/riscv: separation of bitwise logic and arithmetic helpers Alistair Francis
2022-01-08 5:50 ` [PULL 22/37] target/riscv: array for the 64 upper bits of 128-bit registers Alistair Francis
2022-01-08 5:50 ` [PULL 23/37] target/riscv: setup everything for rv64 to support rv128 execution Alistair Francis
2022-01-08 5:50 ` [PULL 24/37] target/riscv: moving some insns close to similar insns Alistair Francis
2022-01-08 5:50 ` [PULL 25/37] target/riscv: accessors to registers upper part and 128-bit load/store Alistair Francis
2022-01-08 5:50 ` [PULL 26/37] target/riscv: support for 128-bit bitwise instructions Alistair Francis
2022-01-08 5:50 ` [PULL 27/37] target/riscv: support for 128-bit U-type instructions Alistair Francis
2022-01-08 5:50 ` [PULL 28/37] target/riscv: support for 128-bit shift instructions Alistair Francis
2022-01-08 5:50 ` [PULL 29/37] target/riscv: support for 128-bit arithmetic instructions Alistair Francis
2022-01-08 5:50 ` [PULL 30/37] target/riscv: support for 128-bit M extension Alistair Francis
2022-01-08 5:50 ` [PULL 31/37] target/riscv: adding high part of some csrs Alistair Francis
2022-01-08 5:50 ` [PULL 32/37] target/riscv: helper functions to wrap calls to 128-bit csr insns Alistair Francis
2022-01-08 5:50 ` [PULL 33/37] target/riscv: modification of the trans_csrxx for 128-bit support Alistair Francis
2022-01-08 5:50 ` [PULL 34/37] target/riscv: actual functions to realize crs 128-bit insns Alistair Francis
2022-01-08 5:50 ` [PULL 35/37] target/riscv: Set the opcode in DisasContext Alistair Francis
2022-01-08 5:50 ` [PULL 36/37] target/riscv: Fixup setting GVA Alistair Francis
2022-01-08 5:50 ` [PULL 37/37] target/riscv: Implement the stval/mtval illegal instruction Alistair Francis
2022-01-08 17:37 ` [PULL 00/37] riscv-to-apply queue Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220108055048.3512645-17-alistair.francis@opensource.wdc.com \
--to=alistair.francis@opensource.wdc.com \
--cc=alistair.francis@wdc.com \
--cc=alistair23@gmail.com \
--cc=bmeng.cn@gmail.com \
--cc=f4bug@amsat.org \
--cc=philipp.tomsich@vrull.eu \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).