From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com,
thuth@redhat.com, pbonzini@redhat.com, lvivier@redhat.com,
qemu-arm@nongnu.org, qemu-devel@nongnu.org,
peter.maydell@linaro.org, mst@redhat.com,
david@gibson.dropbear.id.au, clg@kaod.org
Cc: jean-philippe@linaro.org
Subject: [PATCH 5/6] tests/qtest/vhost-user-blk-test: Factorize vq setup code
Date: Mon, 10 Jan 2022 22:19:14 +0100 [thread overview]
Message-ID: <20220110211915.2749082-6-eric.auger@redhat.com> (raw)
In-Reply-To: <20220110211915.2749082-1-eric.auger@redhat.com>
The vq setup code is repeated several times and can be
easily factorized.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
---
tests/qtest/vhost-user-blk-test.c | 33 +++++++++++++++----------------
1 file changed, 16 insertions(+), 17 deletions(-)
diff --git a/tests/qtest/vhost-user-blk-test.c b/tests/qtest/vhost-user-blk-test.c
index 2024aa5923e..236af80e4ad 100644
--- a/tests/qtest/vhost-user-blk-test.c
+++ b/tests/qtest/vhost-user-blk-test.c
@@ -211,6 +211,19 @@ static void test_invalid_discard_write_zeroes(QVirtioDevice *dev,
guest_free(alloc, req_addr);
}
+static QVirtQueue *setup_vq(QVirtioDevice *dev, QGuestAllocator *alloc)
+{
+ QVirtioPCIDevice *vpcidev = container_of(dev, QVirtioPCIDevice, vdev);
+ QVirtQueue *vq;
+
+ qpci_msix_enable(vpcidev->pdev);
+ qvirtio_pci_set_msix_configuration_vector(vpcidev, alloc, 0);
+
+ vq = qvirtqueue_setup(dev, alloc, 0);
+ qvirtqueue_pci_msix_setup(vpcidev, (QVirtQueuePCI *)vq, alloc, 1);
+ return vq;
+}
+
/* Returns the request virtqueue so the caller can perform further tests */
static QVirtQueue *test_basic(QVirtioDevice *dev, QGuestAllocator *alloc)
{
@@ -223,10 +236,6 @@ static QVirtQueue *test_basic(QVirtioDevice *dev, QGuestAllocator *alloc)
char *data;
QTestState *qts = global_qtest;
QVirtQueue *vq;
- QVirtioPCIDevice *vpcidev = container_of(dev, QVirtioPCIDevice, vdev);
-
- qpci_msix_enable(vpcidev->pdev);
- qvirtio_pci_set_msix_configuration_vector(vpcidev, alloc, 0);
features = qvirtio_get_features(dev);
features = features & ~(QVIRTIO_F_BAD_FEATURE |
@@ -238,8 +247,7 @@ static QVirtQueue *test_basic(QVirtioDevice *dev, QGuestAllocator *alloc)
capacity = qvirtio_config_readq(dev, 0);
g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512);
- vq = qvirtqueue_setup(dev, alloc, 0);
- qvirtqueue_pci_msix_setup(vpcidev, (QVirtQueuePCI *)vq, alloc, 1);
+ vq = setup_vq(dev, alloc);
qvirtio_set_driver_ok(dev);
@@ -474,10 +482,6 @@ static void indirect(void *obj, void *u_data, QGuestAllocator *t_alloc)
uint8_t status;
char *data;
QTestState *qts = global_qtest;
- QVirtioPCIDevice *vpcidev = container_of(dev, QVirtioPCIDevice, vdev);
-
- qpci_msix_enable(vpcidev->pdev);
- qvirtio_pci_set_msix_configuration_vector(vpcidev, t_alloc, 0);
features = qvirtio_get_features(dev);
g_assert_cmphex(features & (1u << VIRTIO_RING_F_INDIRECT_DESC), !=, 0);
@@ -489,8 +493,7 @@ static void indirect(void *obj, void *u_data, QGuestAllocator *t_alloc)
capacity = qvirtio_config_readq(dev, 0);
g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512);
- vq = qvirtqueue_setup(dev, t_alloc, 0);
- qvirtqueue_pci_msix_setup(vpcidev, (QVirtQueuePCI *)vq, t_alloc, 1);
+ vq = setup_vq(dev, t_alloc);
qvirtio_set_driver_ok(dev);
@@ -576,9 +579,6 @@ static void idx(void *obj, void *u_data, QGuestAllocator *t_alloc)
return;
}
- qpci_msix_enable(pdev->pdev);
- qvirtio_pci_set_msix_configuration_vector(pdev, t_alloc, 0);
-
features = qvirtio_get_features(dev);
features = features & ~(QVIRTIO_F_BAD_FEATURE |
(1u << VIRTIO_RING_F_INDIRECT_DESC) |
@@ -589,8 +589,7 @@ static void idx(void *obj, void *u_data, QGuestAllocator *t_alloc)
capacity = qvirtio_config_readq(dev, 0);
g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512);
- vq = qvirtqueue_setup(dev, t_alloc, 0);
- qvirtqueue_pci_msix_setup(pdev, (QVirtQueuePCI *)vq, t_alloc, 1);
+ vq = setup_vq(dev, t_alloc);
qvirtio_set_driver_ok(dev);
--
2.26.3
next prev parent reply other threads:[~2022-01-10 21:36 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-10 21:19 [PATCH 0/6] qtests/libqos: Introduce pci-arm Eric Auger
2022-01-10 21:19 ` [PATCH 1/6] tests/qtest/vhost-user-test.c: Use vhostforce=on Eric Auger
2022-01-14 8:52 ` Thomas Huth
2022-01-10 21:19 ` [PATCH 2/6] tests/qtest/libqos/pci: Introduce pio_limit Eric Auger
2022-01-14 8:54 ` Thomas Huth
2022-01-10 21:19 ` [PATCH 3/6] tests/qtest/libqos: Skip hotplug tests if pci root bus is not hotpluggable Eric Auger
2022-01-14 8:57 ` Thomas Huth
2022-01-10 21:19 ` [PATCH 4/6] tests/qtest/vhost-user-blk-test: Setup MSIx to avoid error on aarch64 Eric Auger
2022-01-14 8:57 ` Thomas Huth
2022-01-10 21:19 ` Eric Auger [this message]
2022-01-14 9:01 ` [PATCH 5/6] tests/qtest/vhost-user-blk-test: Factorize vq setup code Thomas Huth
2022-01-10 21:19 ` [PATCH 6/6] tests/qtest/libqos: Add pci-arm and add a pci-arm producer in arm-virt machine Eric Auger
2022-01-14 9:09 ` Thomas Huth
2022-01-15 16:01 ` Paolo Bonzini
2022-01-18 20:40 ` Eric Auger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220110211915.2749082-6-eric.auger@redhat.com \
--to=eric.auger@redhat.com \
--cc=clg@kaod.org \
--cc=david@gibson.dropbear.id.au \
--cc=eric.auger.pro@gmail.com \
--cc=jean-philippe@linaro.org \
--cc=lvivier@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).