From: Peter Xu <peterx@redhat.com>
To: qemu-devel@nongnu.org
Cc: Juan Quintela <quintela@redhat.com>,
"Dr . David Alan Gilbert" <dgilbert@redhat.com>,
peterx@redhat.com,
Leonardo Bras Soares Passos <lsoaresp@redhat.com>
Subject: [PATCH RFC 05/15] migration: Simplify unqueue_page()
Date: Wed, 19 Jan 2022 16:09:19 +0800 [thread overview]
Message-ID: <20220119080929.39485-6-peterx@redhat.com> (raw)
In-Reply-To: <20220119080929.39485-1-peterx@redhat.com>
This patch simplifies unqueue_page() on both sides of it (itself, and caller).
Firstly, due to the fact that right after unqueue_page() returned true, we'll
definitely send a huge page (see ram_save_huge_page() call - it will _never_
exit before finish sending that huge page), so unqueue_page() does not need to
jump in small page size if huge page is enabled on the ramblock. IOW, it's
destined that only the 1st 4K page will be valid, when unqueue the 2nd+ time
we'll notice the whole huge page has already been sent anyway. Switching to
operating on huge page reduces a lot of the loops of redundant unqueue_page().
Meanwhile, drop the dirty check. It's not helpful to call test_bit() every
time to jump over clean pages, as ram_save_host_page() has already done so,
while in a faster way (see commit ba1b7c812c ("migration/ram: Optimize
ram_save_host_page()", 2021-05-13)). So that's not necessary too.
Drop the two tracepoints along the way - based on above analysis it's very
possible that no one is really using it..
Signed-off-by: Peter Xu <peterx@redhat.com>
---
migration/ram.c | 34 ++++++++--------------------------
migration/trace-events | 2 --
2 files changed, 8 insertions(+), 28 deletions(-)
diff --git a/migration/ram.c b/migration/ram.c
index dc6ba041fa..0df15ff663 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -1541,6 +1541,7 @@ static RAMBlock *unqueue_page(RAMState *rs, ram_addr_t *offset)
{
struct RAMSrcPageRequest *entry;
RAMBlock *block = NULL;
+ size_t page_size;
if (!postcopy_has_request(rs)) {
return NULL;
@@ -1557,10 +1558,13 @@ static RAMBlock *unqueue_page(RAMState *rs, ram_addr_t *offset)
entry = QSIMPLEQ_FIRST(&rs->src_page_requests);
block = entry->rb;
*offset = entry->offset;
+ page_size = qemu_ram_pagesize(block);
+ /* Each page request should only be multiple page size of the ramblock */
+ assert((entry->len % page_size) == 0);
- if (entry->len > TARGET_PAGE_SIZE) {
- entry->len -= TARGET_PAGE_SIZE;
- entry->offset += TARGET_PAGE_SIZE;
+ if (entry->len > page_size) {
+ entry->len -= page_size;
+ entry->offset += page_size;
} else {
memory_region_unref(block->mr);
QSIMPLEQ_REMOVE_HEAD(&rs->src_page_requests, next_req);
@@ -1942,30 +1946,8 @@ static bool get_queued_page(RAMState *rs, PageSearchStatus *pss)
{
RAMBlock *block;
ram_addr_t offset;
- bool dirty;
- do {
- block = unqueue_page(rs, &offset);
- /*
- * We're sending this page, and since it's postcopy nothing else
- * will dirty it, and we must make sure it doesn't get sent again
- * even if this queue request was received after the background
- * search already sent it.
- */
- if (block) {
- unsigned long page;
-
- page = offset >> TARGET_PAGE_BITS;
- dirty = test_bit(page, block->bmap);
- if (!dirty) {
- trace_get_queued_page_not_dirty(block->idstr, (uint64_t)offset,
- page);
- } else {
- trace_get_queued_page(block->idstr, (uint64_t)offset, page);
- }
- }
-
- } while (block && !dirty);
+ block = unqueue_page(rs, &offset);
if (!block) {
/*
diff --git a/migration/trace-events b/migration/trace-events
index e165687af2..3a9b3567ae 100644
--- a/migration/trace-events
+++ b/migration/trace-events
@@ -85,8 +85,6 @@ put_qlist_end(const char *field_name, const char *vmsd_name) "%s(%s)"
qemu_file_fclose(void) ""
# ram.c
-get_queued_page(const char *block_name, uint64_t tmp_offset, unsigned long page_abs) "%s/0x%" PRIx64 " page_abs=0x%lx"
-get_queued_page_not_dirty(const char *block_name, uint64_t tmp_offset, unsigned long page_abs) "%s/0x%" PRIx64 " page_abs=0x%lx"
migration_bitmap_sync_start(void) ""
migration_bitmap_sync_end(uint64_t dirty_pages) "dirty_pages %" PRIu64
migration_bitmap_clear_dirty(char *str, uint64_t start, uint64_t size, unsigned long page) "rb %s start 0x%"PRIx64" size 0x%"PRIx64" page 0x%lx"
--
2.32.0
next prev parent reply other threads:[~2022-01-19 8:55 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-19 8:09 [PATCH RFC 00/15] migration: Postcopy Preemption Peter Xu
2022-01-19 8:09 ` [PATCH RFC 01/15] migration: No off-by-one for pss->page update in host page size Peter Xu
2022-01-19 12:58 ` Dr. David Alan Gilbert
2022-01-27 9:40 ` Juan Quintela
2022-01-19 8:09 ` [PATCH RFC 02/15] migration: Allow pss->page jump over clean pages Peter Xu
2022-01-19 13:42 ` Dr. David Alan Gilbert
2022-01-20 2:12 ` Peter Xu
2022-02-03 18:19 ` Dr. David Alan Gilbert
2022-02-08 3:20 ` Peter Xu
2022-01-19 8:09 ` [PATCH RFC 03/15] migration: Enable UFFD_FEATURE_THREAD_ID even without blocktime feat Peter Xu
2022-01-19 14:15 ` Dr. David Alan Gilbert
2022-01-27 9:40 ` Juan Quintela
2022-01-19 8:09 ` [PATCH RFC 04/15] migration: Add postcopy_has_request() Peter Xu
2022-01-19 14:27 ` Dr. David Alan Gilbert
2022-01-27 9:41 ` Juan Quintela
2022-01-19 8:09 ` Peter Xu [this message]
2022-01-19 16:36 ` [PATCH RFC 05/15] migration: Simplify unqueue_page() Dr. David Alan Gilbert
2022-01-20 2:23 ` Peter Xu
2022-01-25 11:01 ` Dr. David Alan Gilbert
2022-01-27 9:41 ` Juan Quintela
2022-01-19 8:09 ` [PATCH RFC 06/15] migration: Move temp page setup and cleanup into separate functions Peter Xu
2022-01-19 16:58 ` Dr. David Alan Gilbert
2022-01-27 9:43 ` Juan Quintela
2022-01-19 8:09 ` [PATCH RFC 07/15] migration: Introduce postcopy channels on dest node Peter Xu
2022-02-03 15:08 ` Dr. David Alan Gilbert
2022-02-08 3:27 ` Peter Xu
2022-02-08 9:43 ` Dr. David Alan Gilbert
2022-02-08 10:07 ` Peter Xu
2022-01-19 8:09 ` [PATCH RFC 08/15] migration: Dump ramblock and offset too when non-same-page detected Peter Xu
2022-02-03 15:15 ` Dr. David Alan Gilbert
2022-01-19 8:09 ` [PATCH RFC 09/15] migration: Add postcopy_thread_create() Peter Xu
2022-02-03 15:19 ` Dr. David Alan Gilbert
2022-02-08 3:37 ` Peter Xu
2022-02-08 11:16 ` Dr. David Alan Gilbert
2022-01-19 8:09 ` [PATCH RFC 10/15] migration: Move static var in ram_block_from_stream() into global Peter Xu
2022-02-03 17:48 ` Dr. David Alan Gilbert
2022-02-08 3:51 ` Peter Xu
2022-01-19 8:09 ` [PATCH RFC 11/15] migration: Add pss.postcopy_requested status Peter Xu
2022-02-03 15:42 ` Dr. David Alan Gilbert
2022-01-19 8:09 ` [PATCH RFC 12/15] migration: Move migrate_allow_multifd and helpers into migration.c Peter Xu
2022-02-03 15:44 ` Dr. David Alan Gilbert
2022-01-19 8:09 ` [PATCH RFC 13/15] migration: Add postcopy-preempt capability Peter Xu
2022-02-03 15:46 ` Dr. David Alan Gilbert
2022-01-19 8:09 ` [PATCH RFC 14/15] migration: Postcopy preemption on separate channel Peter Xu
2022-02-03 17:45 ` Dr. David Alan Gilbert
2022-02-08 4:22 ` Peter Xu
2022-02-08 11:24 ` Dr. David Alan Gilbert
2022-02-08 11:39 ` Peter Xu
2022-02-08 13:23 ` Dr. David Alan Gilbert
2022-02-09 2:16 ` Peter Xu
2022-01-19 8:09 ` [PATCH RFC 15/15] tests: Add postcopy preempt test Peter Xu
2022-02-03 15:53 ` Dr. David Alan Gilbert
2022-01-19 12:32 ` [PATCH RFC 00/15] migration: Postcopy Preemption Dr. David Alan Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220119080929.39485-6-peterx@redhat.com \
--to=peterx@redhat.com \
--cc=dgilbert@redhat.com \
--cc=lsoaresp@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).