From: Alistair Francis <alistair.francis@opensource.wdc.com>
To: qemu-devel@nongnu.org
Cc: alistair23@gmail.com, Yifei Jiang <jiangyifei@huawei.com>,
Mingwang Li <limingwang@huawei.com>,
Alistair Francis <alistair.francis@wdc.com>,
Anup Patel <anup.patel@wdc.com>
Subject: [PULL 04/61] update-linux-headers: Add asm-riscv/kvm.h
Date: Fri, 21 Jan 2022 15:57:33 +1000 [thread overview]
Message-ID: <20220121055830.3164408-5-alistair.francis@opensource.wdc.com> (raw)
In-Reply-To: <20220121055830.3164408-1-alistair.francis@opensource.wdc.com>
From: Yifei Jiang <jiangyifei@huawei.com>
Add asm-riscv/kvm.h for RISC-V KVM.
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Mingwang Li <limingwang@huawei.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Message-id: 20220112081329.1835-2-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
| 128 ++++++++++++++++++++++++++++++++++
1 file changed, 128 insertions(+)
create mode 100644 linux-headers/asm-riscv/kvm.h
--git a/linux-headers/asm-riscv/kvm.h b/linux-headers/asm-riscv/kvm.h
new file mode 100644
index 0000000000..f808ad1ce5
--- /dev/null
+++ b/linux-headers/asm-riscv/kvm.h
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2019 Western Digital Corporation or its affiliates.
+ *
+ * Authors:
+ * Anup Patel <anup.patel@wdc.com>
+ */
+
+#ifndef __LINUX_KVM_RISCV_H
+#define __LINUX_KVM_RISCV_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <asm/ptrace.h>
+
+#define __KVM_HAVE_READONLY_MEM
+
+#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
+
+#define KVM_INTERRUPT_SET -1U
+#define KVM_INTERRUPT_UNSET -2U
+
+/* for KVM_GET_REGS and KVM_SET_REGS */
+struct kvm_regs {
+};
+
+/* for KVM_GET_FPU and KVM_SET_FPU */
+struct kvm_fpu {
+};
+
+/* KVM Debug exit structure */
+struct kvm_debug_exit_arch {
+};
+
+/* for KVM_SET_GUEST_DEBUG */
+struct kvm_guest_debug_arch {
+};
+
+/* definition of registers in kvm_run */
+struct kvm_sync_regs {
+};
+
+/* for KVM_GET_SREGS and KVM_SET_SREGS */
+struct kvm_sregs {
+};
+
+/* CONFIG registers for KVM_GET_ONE_REG and KVM_SET_ONE_REG */
+struct kvm_riscv_config {
+ unsigned long isa;
+};
+
+/* CORE registers for KVM_GET_ONE_REG and KVM_SET_ONE_REG */
+struct kvm_riscv_core {
+ struct user_regs_struct regs;
+ unsigned long mode;
+};
+
+/* Possible privilege modes for kvm_riscv_core */
+#define KVM_RISCV_MODE_S 1
+#define KVM_RISCV_MODE_U 0
+
+/* CSR registers for KVM_GET_ONE_REG and KVM_SET_ONE_REG */
+struct kvm_riscv_csr {
+ unsigned long sstatus;
+ unsigned long sie;
+ unsigned long stvec;
+ unsigned long sscratch;
+ unsigned long sepc;
+ unsigned long scause;
+ unsigned long stval;
+ unsigned long sip;
+ unsigned long satp;
+ unsigned long scounteren;
+};
+
+/* TIMER registers for KVM_GET_ONE_REG and KVM_SET_ONE_REG */
+struct kvm_riscv_timer {
+ __u64 frequency;
+ __u64 time;
+ __u64 compare;
+ __u64 state;
+};
+
+/* Possible states for kvm_riscv_timer */
+#define KVM_RISCV_TIMER_STATE_OFF 0
+#define KVM_RISCV_TIMER_STATE_ON 1
+
+#define KVM_REG_SIZE(id) \
+ (1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT))
+
+/* If you need to interpret the index values, here is the key: */
+#define KVM_REG_RISCV_TYPE_MASK 0x00000000FF000000
+#define KVM_REG_RISCV_TYPE_SHIFT 24
+
+/* Config registers are mapped as type 1 */
+#define KVM_REG_RISCV_CONFIG (0x01 << KVM_REG_RISCV_TYPE_SHIFT)
+#define KVM_REG_RISCV_CONFIG_REG(name) \
+ (offsetof(struct kvm_riscv_config, name) / sizeof(unsigned long))
+
+/* Core registers are mapped as type 2 */
+#define KVM_REG_RISCV_CORE (0x02 << KVM_REG_RISCV_TYPE_SHIFT)
+#define KVM_REG_RISCV_CORE_REG(name) \
+ (offsetof(struct kvm_riscv_core, name) / sizeof(unsigned long))
+
+/* Control and status registers are mapped as type 3 */
+#define KVM_REG_RISCV_CSR (0x03 << KVM_REG_RISCV_TYPE_SHIFT)
+#define KVM_REG_RISCV_CSR_REG(name) \
+ (offsetof(struct kvm_riscv_csr, name) / sizeof(unsigned long))
+
+/* Timer registers are mapped as type 4 */
+#define KVM_REG_RISCV_TIMER (0x04 << KVM_REG_RISCV_TYPE_SHIFT)
+#define KVM_REG_RISCV_TIMER_REG(name) \
+ (offsetof(struct kvm_riscv_timer, name) / sizeof(__u64))
+
+/* F extension registers are mapped as type 5 */
+#define KVM_REG_RISCV_FP_F (0x05 << KVM_REG_RISCV_TYPE_SHIFT)
+#define KVM_REG_RISCV_FP_F_REG(name) \
+ (offsetof(struct __riscv_f_ext_state, name) / sizeof(__u32))
+
+/* D extension registers are mapped as type 6 */
+#define KVM_REG_RISCV_FP_D (0x06 << KVM_REG_RISCV_TYPE_SHIFT)
+#define KVM_REG_RISCV_FP_D_REG(name) \
+ (offsetof(struct __riscv_d_ext_state, name) / sizeof(__u64))
+
+#endif
+
+#endif /* __LINUX_KVM_RISCV_H */
--
2.31.1
next prev parent reply other threads:[~2022-01-21 6:25 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-21 5:57 [PULL 00/61] riscv-to-apply queue Alistair Francis
2022-01-21 5:57 ` [PULL 01/61] hw: timer: ibex_timer: Fixup reading w/o register Alistair Francis
2022-01-21 5:57 ` [PULL 02/61] riscv: opentitan: fixup plic stride len Alistair Francis
2022-01-21 5:57 ` [PULL 03/61] hw: timer: ibex_timer: update/add reg address Alistair Francis
2022-01-21 5:57 ` Alistair Francis [this message]
2022-01-21 5:57 ` [PULL 05/61] target/riscv: Add target/riscv/kvm.c to place the public kvm interface Alistair Francis
2022-01-21 5:57 ` [PULL 06/61] target/riscv: Implement function kvm_arch_init_vcpu Alistair Francis
2022-01-21 5:57 ` [PULL 07/61] target/riscv: Implement kvm_arch_get_registers Alistair Francis
2022-01-21 5:57 ` [PULL 08/61] target/riscv: Implement kvm_arch_put_registers Alistair Francis
2022-01-21 5:57 ` [PULL 09/61] target/riscv: Support start kernel directly by KVM Alistair Francis
2022-01-21 5:57 ` [PULL 10/61] target/riscv: Support setting external interrupt " Alistair Francis
2022-01-21 5:57 ` [PULL 11/61] target/riscv: Handle KVM_EXIT_RISCV_SBI exit Alistair Francis
2022-01-21 5:57 ` [PULL 12/61] target/riscv: Add host cpu type Alistair Francis
2022-01-21 5:57 ` [PULL 13/61] target/riscv: Add kvm_riscv_get/put_regs_timer Alistair Francis
2022-01-21 5:57 ` [PULL 14/61] target/riscv: Implement virtual time adjusting with vm state changing Alistair Francis
2022-01-21 5:57 ` [PULL 15/61] target/riscv: Support virtual time context synchronization Alistair Francis
2022-01-21 5:57 ` [PULL 16/61] target/riscv: enable riscv kvm accel Alistair Francis
2022-01-21 5:57 ` [PULL 17/61] softmmu/device_tree: Silence compiler warning with --enable-sanitizers Alistair Francis
2022-01-21 5:57 ` [PULL 18/61] softmmu/device_tree: Remove redundant pointer assignment Alistair Francis
2022-01-21 5:57 ` [PULL 19/61] target/riscv: rvv-1.0: Add Zve64f extension into RISC-V Alistair Francis
2022-01-21 5:57 ` [PULL 20/61] target/riscv: rvv-1.0: Add Zve64f support for configuration insns Alistair Francis
2022-01-21 5:57 ` [PULL 21/61] target/riscv: rvv-1.0: Add Zve64f support for load and store insns Alistair Francis
2022-01-21 5:57 ` [PULL 22/61] target/riscv: rvv-1.0: Add Zve64f support for vmulh variant insns Alistair Francis
2022-01-21 5:57 ` [PULL 23/61] target/riscv: rvv-1.0: Add Zve64f support for vsmul.vv and vsmul.vx insns Alistair Francis
2022-01-21 5:57 ` [PULL 24/61] target/riscv: rvv-1.0: Add Zve64f support for scalar fp insns Alistair Francis
2022-01-21 5:57 ` [PULL 25/61] target/riscv: rvv-1.0: Add Zve64f support for single-width fp reduction insns Alistair Francis
2022-01-21 5:57 ` [PULL 26/61] target/riscv: rvv-1.0: Add Zve64f support for widening type-convert insns Alistair Francis
2022-01-21 5:57 ` [PULL 27/61] target/riscv: rvv-1.0: Add Zve64f support for narrowing " Alistair Francis
2022-01-21 5:57 ` [PULL 28/61] target/riscv: rvv-1.0: Allow Zve64f extension to be turned on Alistair Francis
2022-01-21 5:57 ` [PULL 29/61] target/riscv: rvv-1.0: Add Zve32f extension into RISC-V Alistair Francis
2022-01-21 5:57 ` [PULL 30/61] target/riscv: rvv-1.0: Add Zve32f support for configuration insns Alistair Francis
2022-01-21 5:58 ` [PULL 31/61] target/riscv: rvv-1.0: Add Zve32f support for scalar fp insns Alistair Francis
2022-01-21 5:58 ` [PULL 32/61] target/riscv: rvv-1.0: Add Zve32f support for single-width fp reduction insns Alistair Francis
2022-01-21 5:58 ` [PULL 33/61] target/riscv: rvv-1.0: Add Zve32f support for widening type-convert insns Alistair Francis
2022-01-21 5:58 ` [PULL 34/61] target/riscv: rvv-1.0: Add Zve32f support for narrowing " Alistair Francis
2022-01-21 5:58 ` [PULL 35/61] target/riscv: rvv-1.0: Allow Zve32f extension to be turned on Alistair Francis
2022-01-21 5:58 ` [PULL 36/61] hw/riscv: spike: Allow using binary firmware as bios Alistair Francis
2022-01-21 5:58 ` [PULL 37/61] hw/riscv: Remove macros for ELF BIOS image names Alistair Francis
2022-01-21 5:58 ` [PULL 38/61] roms/opensbi: Remove ELF images Alistair Francis
2022-01-21 5:58 ` [PULL 39/61] target/riscv: Adjust pmpcfg access with mxl Alistair Francis
2022-01-21 5:58 ` [PULL 40/61] target/riscv: Don't save pc when exception return Alistair Francis
2022-01-21 5:58 ` [PULL 41/61] target/riscv: Sign extend link reg for jal and jalr Alistair Francis
2022-01-21 5:58 ` [PULL 42/61] target/riscv: Sign extend pc for different XLEN Alistair Francis
2022-01-21 5:58 ` [PULL 43/61] target/riscv: Create xl field in env Alistair Francis
2022-01-21 5:58 ` [PULL 44/61] target/riscv: Ignore the pc bits above XLEN Alistair Francis
2022-01-21 5:58 ` [PULL 45/61] target/riscv: Extend pc for runtime pc write Alistair Francis
2022-01-21 5:58 ` [PULL 46/61] target/riscv: Use gdb xml according to max mxlen Alistair Francis
2022-01-21 5:58 ` [PULL 47/61] target/riscv: Relax debug check for pm write Alistair Francis
2022-01-21 5:58 ` [PULL 48/61] target/riscv: Adjust csr write mask with XLEN Alistair Francis
2022-01-21 5:58 ` [PULL 49/61] target/riscv: Create current pm fields in env Alistair Francis
2022-01-21 5:58 ` [PULL 50/61] target/riscv: Alloc tcg global for cur_pm[mask|base] Alistair Francis
2022-01-21 5:58 ` [PULL 51/61] target/riscv: Calculate address according to XLEN Alistair Francis
2022-01-21 5:58 ` [PULL 52/61] target/riscv: Split pm_enabled into mask and base Alistair Francis
2022-01-21 5:58 ` [PULL 53/61] target/riscv: Split out the vill from vtype Alistair Francis
2022-01-28 16:10 ` Peter Maydell
2022-02-01 2:12 ` Alistair Francis
2022-02-01 6:47 ` LIU Zhiwei
2022-01-21 5:58 ` [PULL 54/61] target/riscv: Adjust vsetvl according to XLEN Alistair Francis
2022-01-21 5:58 ` [PULL 55/61] target/riscv: Remove VILL field in VTYPE Alistair Francis
2022-01-21 5:58 ` [PULL 56/61] target/riscv: Fix check range for first fault only Alistair Francis
2022-01-21 5:58 ` [PULL 57/61] target/riscv: Adjust vector address with mask Alistair Francis
2022-01-21 5:58 ` [PULL 58/61] target/riscv: Adjust scalar reg in vector with XLEN Alistair Francis
2022-01-21 5:58 ` [PULL 59/61] target/riscv: Set default XLEN for hypervisor Alistair Francis
2022-01-21 5:58 ` [PULL 60/61] target/riscv: Enable uxl field write Alistair Francis
2022-01-21 5:58 ` [PULL 61/61] target/riscv: Relax UXL field for debugging Alistair Francis
2022-01-21 12:58 ` [PULL 00/61] riscv-to-apply queue Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220121055830.3164408-5-alistair.francis@opensource.wdc.com \
--to=alistair.francis@opensource.wdc.com \
--cc=alistair.francis@wdc.com \
--cc=alistair23@gmail.com \
--cc=anup.patel@wdc.com \
--cc=jiangyifei@huawei.com \
--cc=limingwang@huawei.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).