From: Fabiano Rosas <farosas@linux.ibm.com>
To: qemu-devel@nongnu.org
Cc: mark.cave-ayland@ilande.co.uk, danielhb413@gmail.com,
qemu-ppc@nongnu.org, clg@kaod.org, david@gibson.dropbear.id.au
Subject: [PATCH 2/8] target/ppc: Simplify powerpc_excp_74xx
Date: Wed, 26 Jan 2022 13:41:54 -0300 [thread overview]
Message-ID: <20220126164200.1048677-3-farosas@linux.ibm.com> (raw)
In-Reply-To: <20220126164200.1048677-1-farosas@linux.ibm.com>
Differences from the generic powerpc_excp code:
- Not BookE, so some MSR bits are cleared at interrupt dispatch;
- No MSR_HV;
- No power saving states;
- No Hypervisor Emulation Assistance;
- Not 64 bits;
- No System call vectored;
- No Alternate Interrupt Location.
Exceptions used:
POWERPC_EXCP_ALIGN
POWERPC_EXCP_DECR
POWERPC_EXCP_DSI
POWERPC_EXCP_EXTERNAL
POWERPC_EXCP_FPU
POWERPC_EXCP_IABR
POWERPC_EXCP_ISI
POWERPC_EXCP_MCHECK
POWERPC_EXCP_PERFM
POWERPC_EXCP_PROGRAM
POWERPC_EXCP_RESET
POWERPC_EXCP_SMI
POWERPC_EXCP_SYSCALL
POWERPC_EXCP_THERM
POWERPC_EXCP_TRACE
POWERPC_EXCP_VPU
POWERPC_EXCP_VPUA
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
---
target/ppc/excp_helper.c | 211 ++-------------------------------------
1 file changed, 9 insertions(+), 202 deletions(-)
diff --git a/target/ppc/excp_helper.c b/target/ppc/excp_helper.c
index 0e3d3ffcf4..13e5cb3ddc 100644
--- a/target/ppc/excp_helper.c
+++ b/target/ppc/excp_helper.c
@@ -568,54 +568,26 @@ static void powerpc_excp_74xx(PowerPCCPU *cpu, int excp)
excp, env->error_code);
/* new srr1 value excluding must-be-zero bits */
- if (excp_model == POWERPC_EXCP_BOOKE) {
- msr = env->msr;
- } else {
- msr = env->msr & ~0x783f0000ULL;
- }
+ msr = env->msr & ~0x783f0000ULL;
/*
- * new interrupt handler msr preserves existing HV and ME unless
+ * new interrupt handler msr preserves existing ME unless
* explicitly overriden
*/
- new_msr = env->msr & (((target_ulong)1 << MSR_ME) | MSR_HVB);
+ new_msr = env->msr & ((target_ulong)1 << MSR_ME);
/* target registers */
srr0 = SPR_SRR0;
srr1 = SPR_SRR1;
- /*
- * check for special resume at 0x100 from doze/nap/sleep/winkle on
- * P7/P8/P9
- */
- if (env->resume_as_sreset) {
- excp = powerpc_reset_wakeup(cs, env, excp, &msr);
- }
-
/*
* Hypervisor emulation assistance interrupt only exists on server
- * arch 2.05 server or later. We also don't want to generate it if
- * we don't have HVB in msr_mask (PAPR mode).
+ * arch 2.05 server or later.
*/
- if (excp == POWERPC_EXCP_HV_EMU
-#if defined(TARGET_PPC64)
- && !(mmu_is_64bit(env->mmu_model) && (env->msr_mask & MSR_HVB))
-#endif /* defined(TARGET_PPC64) */
-
- ) {
+ if (excp == POWERPC_EXCP_HV_EMU) {
excp = POWERPC_EXCP_PROGRAM;
}
-#ifdef TARGET_PPC64
- /*
- * SPEU and VPU share the same IVOR but they exist in different
- * processors. SPEU is e500v1/2 only and VPU is e6500 only.
- */
- if (excp_model == POWERPC_EXCP_BOOKE && excp == POWERPC_EXCP_VPU) {
- excp = POWERPC_EXCP_SPEU;
- }
-#endif
-
vector = env->excp_vectors[excp];
if (vector == (target_ulong)-1ULL) {
cpu_abort(cs, "Raised an exception without defined vector %d\n",
@@ -625,22 +597,6 @@ static void powerpc_excp_74xx(PowerPCCPU *cpu, int excp)
vector |= env->excp_prefix;
switch (excp) {
- case POWERPC_EXCP_CRITICAL: /* Critical input */
- switch (excp_model) {
- case POWERPC_EXCP_40x:
- srr0 = SPR_40x_SRR2;
- srr1 = SPR_40x_SRR3;
- break;
- case POWERPC_EXCP_BOOKE:
- srr0 = SPR_BOOKE_CSRR0;
- srr1 = SPR_BOOKE_CSRR1;
- break;
- case POWERPC_EXCP_G2:
- break;
- default:
- goto excp_invalid;
- }
- break;
case POWERPC_EXCP_MCHECK: /* Machine check exception */
if (msr_me == 0) {
/*
@@ -804,63 +760,9 @@ static void powerpc_excp_74xx(PowerPCCPU *cpu, int excp)
new_msr |= (target_ulong)MSR_HVB;
}
break;
- case POWERPC_EXCP_SYSCALL_VECTORED: /* scv exception */
- lev = env->error_code;
- dump_syscall(env);
- env->nip += 4;
- new_msr |= env->msr & ((target_ulong)1 << MSR_EE);
- new_msr |= env->msr & ((target_ulong)1 << MSR_RI);
-
- vector += lev * 0x20;
-
- env->lr = env->nip;
- env->ctr = msr;
- break;
case POWERPC_EXCP_FPU: /* Floating-point unavailable exception */
- case POWERPC_EXCP_APU: /* Auxiliary processor unavailable */
case POWERPC_EXCP_DECR: /* Decrementer exception */
break;
- case POWERPC_EXCP_FIT: /* Fixed-interval timer interrupt */
- /* FIT on 4xx */
- trace_ppc_excp_print("FIT");
- break;
- case POWERPC_EXCP_WDT: /* Watchdog timer interrupt */
- trace_ppc_excp_print("WDT");
- switch (excp_model) {
- case POWERPC_EXCP_BOOKE:
- srr0 = SPR_BOOKE_CSRR0;
- srr1 = SPR_BOOKE_CSRR1;
- break;
- default:
- break;
- }
- break;
- case POWERPC_EXCP_DTLB: /* Data TLB error */
- case POWERPC_EXCP_ITLB: /* Instruction TLB error */
- break;
- case POWERPC_EXCP_DEBUG: /* Debug interrupt */
- if (env->flags & POWERPC_FLAG_DE) {
- /* FIXME: choose one or the other based on CPU type */
- srr0 = SPR_BOOKE_DSRR0;
- srr1 = SPR_BOOKE_DSRR1;
-
- env->spr[SPR_BOOKE_CSRR0] = env->nip;
- env->spr[SPR_BOOKE_CSRR1] = msr;
-
- /* DBSR already modified by caller */
- } else {
- cpu_abort(cs, "Debug exception triggered on unsupported model\n");
- }
- break;
- case POWERPC_EXCP_SPEU: /* SPE/embedded floating-point unavailable/VPU */
- env->spr[SPR_BOOKE_ESR] = ESR_SPV;
- break;
- case POWERPC_EXCP_DOORI: /* Embedded doorbell interrupt */
- break;
- case POWERPC_EXCP_DOORCI: /* Embedded doorbell critical interrupt */
- srr0 = SPR_BOOKE_CSRR0;
- srr1 = SPR_BOOKE_CSRR1;
- break;
case POWERPC_EXCP_RESET: /* System reset exception */
/* A power-saving exception sets ME, otherwise it is unchanged */
if (msr_pow) {
@@ -881,92 +783,19 @@ static void powerpc_excp_74xx(PowerPCCPU *cpu, int excp)
}
}
break;
- case POWERPC_EXCP_DSEG: /* Data segment exception */
- case POWERPC_EXCP_ISEG: /* Instruction segment exception */
case POWERPC_EXCP_TRACE: /* Trace exception */
break;
- case POWERPC_EXCP_HISI: /* Hypervisor instruction storage exception */
- msr |= env->error_code;
- /* fall through */
- case POWERPC_EXCP_HDECR: /* Hypervisor decrementer exception */
- case POWERPC_EXCP_HDSI: /* Hypervisor data storage exception */
- case POWERPC_EXCP_HDSEG: /* Hypervisor data segment exception */
- case POWERPC_EXCP_HISEG: /* Hypervisor instruction segment exception */
- case POWERPC_EXCP_SDOOR_HV: /* Hypervisor Doorbell interrupt */
- case POWERPC_EXCP_HV_EMU:
- case POWERPC_EXCP_HVIRT: /* Hypervisor virtualization */
- srr0 = SPR_HSRR0;
- srr1 = SPR_HSRR1;
- new_msr |= (target_ulong)MSR_HVB;
- new_msr |= env->msr & ((target_ulong)1 << MSR_RI);
- break;
case POWERPC_EXCP_VPU: /* Vector unavailable exception */
- case POWERPC_EXCP_VSXU: /* VSX unavailable exception */
- case POWERPC_EXCP_FU: /* Facility unavailable exception */
-#ifdef TARGET_PPC64
- env->spr[SPR_FSCR] |= ((target_ulong)env->error_code << 56);
-#endif
break;
- case POWERPC_EXCP_HV_FU: /* Hypervisor Facility Unavailable Exception */
-#ifdef TARGET_PPC64
- env->spr[SPR_HFSCR] |= ((target_ulong)env->error_code << FSCR_IC_POS);
- srr0 = SPR_HSRR0;
- srr1 = SPR_HSRR1;
- new_msr |= (target_ulong)MSR_HVB;
- new_msr |= env->msr & ((target_ulong)1 << MSR_RI);
-#endif
- break;
- case POWERPC_EXCP_PIT: /* Programmable interval timer interrupt */
- trace_ppc_excp_print("PIT");
- break;
- case POWERPC_EXCP_IFTLB: /* Instruction fetch TLB error */
- case POWERPC_EXCP_DLTLB: /* Data load TLB miss */
- case POWERPC_EXCP_DSTLB: /* Data store TLB miss */
- switch (excp_model) {
- case POWERPC_EXCP_602:
- case POWERPC_EXCP_603:
- case POWERPC_EXCP_G2:
- /* Swap temporary saved registers with GPRs */
- if (!(new_msr & ((target_ulong)1 << MSR_TGPR))) {
- new_msr |= (target_ulong)1 << MSR_TGPR;
- hreg_swap_gpr_tgpr(env);
- }
- /* fall through */
- case POWERPC_EXCP_7x5:
- ppc_excp_debug_sw_tlb(env, excp);
-
- msr |= env->crf[0] << 28;
- msr |= env->error_code; /* key, D/I, S/L bits */
- /* Set way using a LRU mechanism */
- msr |= ((env->last_way + 1) & (env->nb_ways - 1)) << 17;
- break;
- default:
- cpu_abort(cs, "Invalid TLB miss exception\n");
- break;
- }
- break;
- case POWERPC_EXCP_EFPDI: /* Embedded floating-point data interrupt */
- case POWERPC_EXCP_EFPRI: /* Embedded floating-point round interrupt */
- case POWERPC_EXCP_EPERFM: /* Embedded performance monitor interrupt */
- case POWERPC_EXCP_IO: /* IO error exception */
- case POWERPC_EXCP_RUNM: /* Run mode exception */
- case POWERPC_EXCP_EMUL: /* Emulation trap exception */
- case POWERPC_EXCP_FPA: /* Floating-point assist exception */
- case POWERPC_EXCP_DABR: /* Data address breakpoint */
case POWERPC_EXCP_IABR: /* Instruction address breakpoint */
case POWERPC_EXCP_SMI: /* System management interrupt */
case POWERPC_EXCP_THERM: /* Thermal interrupt */
case POWERPC_EXCP_PERFM: /* Embedded performance monitor interrupt */
case POWERPC_EXCP_VPUA: /* Vector assist exception */
- case POWERPC_EXCP_SOFTP: /* Soft patch exception */
- case POWERPC_EXCP_MAINT: /* Maintenance exception */
- case POWERPC_EXCP_MEXTBR: /* Maskable external breakpoint */
- case POWERPC_EXCP_NMEXTBR: /* Non maskable external breakpoint */
cpu_abort(cs, "%s exception not implemented\n",
powerpc_excp_name(excp));
break;
default:
- excp_invalid:
cpu_abort(cs, "Invalid PowerPC exception %d. Aborting\n", excp);
break;
}
@@ -991,33 +820,11 @@ static void powerpc_excp_74xx(PowerPCCPU *cpu, int excp)
new_msr |= (target_ulong)1 << MSR_LE;
}
-#if defined(TARGET_PPC64)
- if (excp_model == POWERPC_EXCP_BOOKE) {
- if (env->spr[SPR_BOOKE_EPCR] & EPCR_ICM) {
- /* Cat.64-bit: EPCR.ICM is copied to MSR.CM */
- new_msr |= (target_ulong)1 << MSR_CM;
- } else {
- vector = (uint32_t)vector;
- }
- } else {
- if (!msr_isf && !mmu_is_64bit(env->mmu_model)) {
- vector = (uint32_t)vector;
- } else {
- new_msr |= (target_ulong)1 << MSR_SF;
- }
- }
-#endif
+ /* Save PC */
+ env->spr[srr0] = env->nip;
- if (excp != POWERPC_EXCP_SYSCALL_VECTORED) {
- /* Save PC */
- env->spr[srr0] = env->nip;
-
- /* Save MSR */
- env->spr[srr1] = msr;
- }
-
- /* This can update new_msr and vector if AIL applies */
- ppc_excp_apply_ail(cpu, excp_model, excp, msr, &new_msr, &vector);
+ /* Save MSR */
+ env->spr[srr1] = msr;
powerpc_set_excp_state(cpu, vector, new_msr);
}
--
2.34.1
next prev parent reply other threads:[~2022-01-26 16:52 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-26 16:41 [PATCH 0/8] target/ppc: powerpc_excp improvements [74xx] (5/n) Fabiano Rosas
2022-01-26 16:41 ` [PATCH 1/8] target/ppc: Introduce powerpc_excp_74xx Fabiano Rosas
2022-01-26 16:41 ` Fabiano Rosas [this message]
2022-01-26 16:41 ` [PATCH 3/8] target/ppc: 74xx: Machine Check exception cleanup Fabiano Rosas
2022-01-26 16:41 ` [PATCH 4/8] target/ppc: 74xx: External interrupt cleanup Fabiano Rosas
2022-01-26 16:41 ` [PATCH 5/8] target/ppc: 74xx: Program exception cleanup Fabiano Rosas
2022-01-26 16:41 ` [PATCH 6/8] target/ppc: 74xx: System Call " Fabiano Rosas
2022-01-26 16:41 ` [PATCH 7/8] target/ppc: 74xx: System Reset interrupt cleanup Fabiano Rosas
2022-01-26 16:42 ` [PATCH 8/8] target/ppc: 74xx: Set SRRs directly in exception code Fabiano Rosas
2022-01-26 17:55 ` [PATCH 0/8] target/ppc: powerpc_excp improvements [74xx] (5/n) BALATON Zoltan
2022-01-26 18:23 ` Cédric Le Goater
2022-01-26 20:00 ` BALATON Zoltan
2022-01-26 21:58 ` Fabiano Rosas
2022-01-27 14:40 ` Mark Cave-Ayland
2022-01-27 15:16 ` Fabiano Rosas
2022-01-27 16:51 ` Cédric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220126164200.1048677-3-farosas@linux.ibm.com \
--to=farosas@linux.ibm.com \
--cc=clg@kaod.org \
--cc=danielhb413@gmail.com \
--cc=david@gibson.dropbear.id.au \
--cc=mark.cave-ayland@ilande.co.uk \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).