From: Lukasz Maniak <lukasz.maniak@linux.intel.com>
To: qemu-devel@nongnu.org
Cc: "Klaus Jensen" <its@irrelevant.dk>,
"Keith Busch" <kbusch@kernel.org>,
"Lukasz Maniak" <lukasz.maniak@linux.intel.com>,
qemu-block@nongnu.org,
"Łukasz Gieryk" <lukasz.gieryk@linux.intel.com>
Subject: [PATCH v4 11/15] hw/nvme: Calculate BAR attributes in a function
Date: Wed, 26 Jan 2022 18:11:16 +0100 [thread overview]
Message-ID: <20220126171120.2939152-12-lukasz.maniak@linux.intel.com> (raw)
In-Reply-To: <20220126171120.2939152-1-lukasz.maniak@linux.intel.com>
From: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
An NVMe device with SR-IOV capability calculates the BAR size
differently for PF and VF, so it makes sense to extract the common code
to a separate function.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
---
hw/nvme/ctrl.c | 45 +++++++++++++++++++++++++++++++--------------
1 file changed, 31 insertions(+), 14 deletions(-)
diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c
index 40eb6bd1a8..e101cb7d7c 100644
--- a/hw/nvme/ctrl.c
+++ b/hw/nvme/ctrl.c
@@ -6431,6 +6431,34 @@ static void nvme_init_pmr(NvmeCtrl *n, PCIDevice *pci_dev)
memory_region_set_enabled(&n->pmr.dev->mr, false);
}
+static uint64_t nvme_bar_size(unsigned total_queues, unsigned total_irqs,
+ unsigned *msix_table_offset,
+ unsigned *msix_pba_offset)
+{
+ uint64_t bar_size, msix_table_size, msix_pba_size;
+
+ bar_size = sizeof(NvmeBar) + 2 * total_queues * NVME_DB_SIZE;
+ bar_size = QEMU_ALIGN_UP(bar_size, 4 * KiB);
+
+ if (msix_table_offset) {
+ *msix_table_offset = bar_size;
+ }
+
+ msix_table_size = PCI_MSIX_ENTRY_SIZE * total_irqs;
+ bar_size += msix_table_size;
+ bar_size = QEMU_ALIGN_UP(bar_size, 4 * KiB);
+
+ if (msix_pba_offset) {
+ *msix_pba_offset = bar_size;
+ }
+
+ msix_pba_size = QEMU_ALIGN_UP(total_irqs, 64) / 8;
+ bar_size += msix_pba_size;
+
+ bar_size = pow2ceil(bar_size);
+ return bar_size;
+}
+
static void nvme_init_sriov(NvmeCtrl *n, PCIDevice *pci_dev, uint16_t offset,
uint64_t bar_size)
{
@@ -6470,7 +6498,7 @@ static int nvme_add_pm_capability(PCIDevice *pci_dev, uint8_t offset)
static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
{
uint8_t *pci_conf = pci_dev->config;
- uint64_t bar_size, msix_table_size, msix_pba_size;
+ uint64_t bar_size;
unsigned msix_table_offset, msix_pba_offset;
int ret;
@@ -6496,19 +6524,8 @@ static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
}
/* add one to max_ioqpairs to account for the admin queue pair */
- bar_size = sizeof(NvmeBar) +
- 2 * (n->params.max_ioqpairs + 1) * NVME_DB_SIZE;
- bar_size = QEMU_ALIGN_UP(bar_size, 4 * KiB);
- msix_table_offset = bar_size;
- msix_table_size = PCI_MSIX_ENTRY_SIZE * n->params.msix_qsize;
-
- bar_size += msix_table_size;
- bar_size = QEMU_ALIGN_UP(bar_size, 4 * KiB);
- msix_pba_offset = bar_size;
- msix_pba_size = QEMU_ALIGN_UP(n->params.msix_qsize, 64) / 8;
-
- bar_size += msix_pba_size;
- bar_size = pow2ceil(bar_size);
+ bar_size = nvme_bar_size(n->params.max_ioqpairs + 1, n->params.msix_qsize,
+ &msix_table_offset, &msix_pba_offset);
memory_region_init(&n->bar0, OBJECT(n), "nvme-bar0", bar_size);
memory_region_init_io(&n->iomem, OBJECT(n), &nvme_mmio_ops, n, "nvme",
--
2.25.1
next prev parent reply other threads:[~2022-01-26 17:42 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-26 17:11 [PATCH v4 00/15] hw/nvme: SR-IOV with Virtualization Enhancements Lukasz Maniak
2022-01-26 17:11 ` [PATCH v4 01/15] pcie: Add support for Single Root I/O Virtualization (SR/IOV) Lukasz Maniak
2022-01-26 17:22 ` Lukasz Maniak
2022-01-26 18:30 ` Knut Omang
2022-01-26 17:11 ` [PATCH v4 02/15] pcie: Add some SR/IOV API documentation in docs/pcie_sriov.txt Lukasz Maniak
2022-01-26 17:11 ` [PATCH v4 03/15] pcie: Add a helper to the SR/IOV API Lukasz Maniak
2022-01-26 17:11 ` [PATCH v4 04/15] pcie: Add 1.2 version token for the Power Management Capability Lukasz Maniak
2022-01-26 17:11 ` [PATCH v4 05/15] hw/nvme: Add support for SR-IOV Lukasz Maniak
2022-01-26 17:11 ` [PATCH v4 06/15] hw/nvme: Add support for Primary Controller Capabilities Lukasz Maniak
2022-01-26 17:11 ` [PATCH v4 07/15] hw/nvme: Add support for Secondary Controller List Lukasz Maniak
2022-01-26 17:11 ` [PATCH v4 08/15] hw/nvme: Implement the Function Level Reset Lukasz Maniak
2022-01-26 17:11 ` [PATCH v4 09/15] hw/nvme: Make max_ioqpairs and msix_qsize configurable in runtime Lukasz Maniak
2022-01-26 17:11 ` [PATCH v4 10/15] hw/nvme: Remove reg_size variable and update BAR0 size calculation Lukasz Maniak
2022-02-11 7:55 ` Klaus Jensen
2022-01-26 17:11 ` Lukasz Maniak [this message]
2022-02-11 7:58 ` [PATCH v4 11/15] hw/nvme: Calculate BAR attributes in a function Klaus Jensen
2022-01-26 17:11 ` [PATCH v4 12/15] hw/nvme: Initialize capability structures for primary/secondary controllers Lukasz Maniak
2022-02-11 7:47 ` Klaus Jensen
2022-01-26 17:11 ` [PATCH v4 13/15] hw/nvme: Add support for the Virtualization Management command Lukasz Maniak
2022-01-26 17:11 ` [PATCH v4 14/15] docs: Add documentation for SR-IOV and Virtualization Enhancements Lukasz Maniak
2022-01-26 17:11 ` [PATCH v4 15/15] hw/nvme: Update the initalization place for the AER queue Lukasz Maniak
2022-02-11 7:43 ` Klaus Jensen
2022-02-11 7:26 ` [PATCH v4 00/15] hw/nvme: SR-IOV with Virtualization Enhancements Klaus Jensen
2022-02-16 15:11 ` Lukasz Maniak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220126171120.2939152-12-lukasz.maniak@linux.intel.com \
--to=lukasz.maniak@linux.intel.com \
--cc=its@irrelevant.dk \
--cc=kbusch@kernel.org \
--cc=lukasz.gieryk@linux.intel.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).