From: Juan Quintela <quintela@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Fam Zheng" <fam@euphon.net>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Michael S. Tsirkin" <mst@redhat.com>,
"Jason Wang" <jasowang@redhat.com>,
"Mark Cave-Ayland" <mark.cave-ayland@ilande.co.uk>,
"Peter Xu" <peterx@redhat.com>,
"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
"Gerd Hoffmann" <kraxel@redhat.com>,
"Ani Sinha" <ani@anisinha.ca>,
"Edgar E. Iglesias" <edgar.iglesias@gmail.com>,
"Eric Blake" <eblake@redhat.com>,
"Hannes Reinecke" <hare@suse.com>,
"Vikram Garhwal" <fnu.vikram@xilinx.com>,
qemu-block@nongnu.org, "Juan Quintela" <quintela@redhat.com>,
"Daniel Henrique Barboza" <danielhb413@gmail.com>,
"Markus Armbruster" <armbru@redhat.com>,
"Artyom Tarasenko" <atar4qemu@gmail.com>,
"Pavel Pisa" <pisa@cmp.felk.cvut.cz>,
"Alistair Francis" <alistair@alistair23.me>,
"Dr. David Alan Gilbert" <dgilbert@redhat.com>,
"Greg Kurz" <groug@kaod.org>,
qemu-arm@nongnu.org, "Cédric Le Goater" <clg@kaod.org>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Stafford Horne" <shorne@gmail.com>,
"David Gibson" <david@gibson.dropbear.id.au>,
"Laurent Vivier" <laurent@vivier.eu>,
"Andrew Baumann" <Andrew.Baumann@microsoft.com>,
qemu-ppc@nongnu.org, "Igor Mammedov" <imammedo@redhat.com>,
"Aurelien Jarno" <aurelien@aurel32.net>
Subject: [PULL 15/38] multifd: Use normal pages array on the recv side
Date: Thu, 27 Jan 2022 16:05:25 +0100 [thread overview]
Message-ID: <20220127150548.20595-16-quintela@redhat.com> (raw)
In-Reply-To: <20220127150548.20595-1-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
Rename num_normal_pages to total_normal_pages (peter)
---
migration/multifd.h | 8 +++++--
migration/multifd-zlib.c | 8 +++----
migration/multifd-zstd.c | 6 +++---
migration/multifd.c | 45 ++++++++++++++++++----------------------
4 files changed, 33 insertions(+), 34 deletions(-)
diff --git a/migration/multifd.h b/migration/multifd.h
index 7823199dbe..850889c5d8 100644
--- a/migration/multifd.h
+++ b/migration/multifd.h
@@ -151,12 +151,16 @@ typedef struct {
uint32_t next_packet_size;
/* packets sent through this channel */
uint64_t num_packets;
- /* pages sent through this channel */
- uint64_t num_pages;
+ /* non zero pages recv through this channel */
+ uint64_t total_normal_pages;
/* syncs main thread and channels */
QemuSemaphore sem_sync;
/* buffers to recv */
struct iovec *iov;
+ /* Pages that are not zero */
+ ram_addr_t *normal;
+ /* num of non zero pages */
+ uint32_t normal_num;
/* used for de-compression methods */
void *data;
} MultiFDRecvParams;
diff --git a/migration/multifd-zlib.c b/migration/multifd-zlib.c
index 7f4fbef2c9..8239c840d3 100644
--- a/migration/multifd-zlib.c
+++ b/migration/multifd-zlib.c
@@ -225,7 +225,7 @@ static int zlib_recv_pages(MultiFDRecvParams *p, Error **errp)
uint32_t in_size = p->next_packet_size;
/* we measure the change of total_out */
uint32_t out_size = zs->total_out;
- uint32_t expected_size = p->pages->num * qemu_target_page_size();
+ uint32_t expected_size = p->normal_num * page_size;
uint32_t flags = p->flags & MULTIFD_FLAG_COMPRESSION_MASK;
int ret;
int i;
@@ -244,16 +244,16 @@ static int zlib_recv_pages(MultiFDRecvParams *p, Error **errp)
zs->avail_in = in_size;
zs->next_in = z->zbuff;
- for (i = 0; i < p->pages->num; i++) {
+ for (i = 0; i < p->normal_num; i++) {
int flush = Z_NO_FLUSH;
unsigned long start = zs->total_out;
- if (i == p->pages->num - 1) {
+ if (i == p->normal_num - 1) {
flush = Z_SYNC_FLUSH;
}
zs->avail_out = page_size;
- zs->next_out = p->pages->block->host + p->pages->offset[i];
+ zs->next_out = p->pages->block->host + p->normal[i];
/*
* Welcome to inflate semantics
diff --git a/migration/multifd-zstd.c b/migration/multifd-zstd.c
index 907d07805c..c5ed72ddcd 100644
--- a/migration/multifd-zstd.c
+++ b/migration/multifd-zstd.c
@@ -242,7 +242,7 @@ static int zstd_recv_pages(MultiFDRecvParams *p, Error **errp)
uint32_t in_size = p->next_packet_size;
uint32_t out_size = 0;
size_t page_size = qemu_target_page_size();
- uint32_t expected_size = p->pages->num * page_size;
+ uint32_t expected_size = p->normal_num * page_size;
uint32_t flags = p->flags & MULTIFD_FLAG_COMPRESSION_MASK;
struct zstd_data *z = p->data;
int ret;
@@ -263,8 +263,8 @@ static int zstd_recv_pages(MultiFDRecvParams *p, Error **errp)
z->in.size = in_size;
z->in.pos = 0;
- for (i = 0; i < p->pages->num; i++) {
- z->out.dst = p->pages->block->host + p->pages->offset[i];
+ for (i = 0; i < p->normal_num; i++) {
+ z->out.dst = p->pages->block->host + p->normal[i];
z->out.size = page_size;
z->out.pos = 0;
diff --git a/migration/multifd.c b/migration/multifd.c
index 7b804928a2..e362b1bb89 100644
--- a/migration/multifd.c
+++ b/migration/multifd.c
@@ -146,11 +146,11 @@ static int nocomp_recv_pages(MultiFDRecvParams *p, Error **errp)
p->id, flags, MULTIFD_FLAG_NOCOMP);
return -1;
}
- for (int i = 0; i < p->pages->num; i++) {
- p->iov[i].iov_base = p->pages->block->host + p->pages->offset[i];
+ for (int i = 0; i < p->normal_num; i++) {
+ p->iov[i].iov_base = p->pages->block->host + p->normal[i];
p->iov[i].iov_len = page_size;
}
- return qio_channel_readv_all(p->c, p->iov, p->pages->num, errp);
+ return qio_channel_readv_all(p->c, p->iov, p->normal_num, errp);
}
static MultiFDMethods multifd_nocomp_ops = {
@@ -282,7 +282,7 @@ static int multifd_recv_unfill_packet(MultiFDRecvParams *p, Error **errp)
{
MultiFDPacket_t *packet = p->packet;
size_t page_size = qemu_target_page_size();
- uint32_t pages_max = MULTIFD_PACKET_SIZE / page_size;
+ uint32_t page_count = MULTIFD_PACKET_SIZE / page_size;
RAMBlock *block;
int i;
@@ -309,33 +309,25 @@ static int multifd_recv_unfill_packet(MultiFDRecvParams *p, Error **errp)
* If we received a packet that is 100 times bigger than expected
* just stop migration. It is a magic number.
*/
- if (packet->pages_alloc > pages_max * 100) {
+ if (packet->pages_alloc > page_count) {
error_setg(errp, "multifd: received packet "
- "with size %u and expected a maximum size of %u",
- packet->pages_alloc, pages_max * 100) ;
+ "with size %u and expected a size of %u",
+ packet->pages_alloc, page_count) ;
return -1;
}
- /*
- * We received a packet that is bigger than expected but inside
- * reasonable limits (see previous comment). Just reallocate.
- */
- if (packet->pages_alloc > p->pages->allocated) {
- multifd_pages_clear(p->pages);
- p->pages = multifd_pages_init(packet->pages_alloc);
- }
- p->pages->num = be32_to_cpu(packet->pages_used);
- if (p->pages->num > packet->pages_alloc) {
+ p->normal_num = be32_to_cpu(packet->pages_used);
+ if (p->normal_num > packet->pages_alloc) {
error_setg(errp, "multifd: received packet "
"with %u pages and expected maximum pages are %u",
- p->pages->num, packet->pages_alloc) ;
+ p->normal_num, packet->pages_alloc) ;
return -1;
}
p->next_packet_size = be32_to_cpu(packet->next_packet_size);
p->packet_num = be64_to_cpu(packet->packet_num);
- if (p->pages->num == 0) {
+ if (p->normal_num == 0) {
return 0;
}
@@ -349,7 +341,7 @@ static int multifd_recv_unfill_packet(MultiFDRecvParams *p, Error **errp)
}
p->pages->block = block;
- for (i = 0; i < p->pages->num; i++) {
+ for (i = 0; i < p->normal_num; i++) {
uint64_t offset = be64_to_cpu(packet->offset[i]);
if (offset > (block->used_length - page_size)) {
@@ -358,7 +350,7 @@ static int multifd_recv_unfill_packet(MultiFDRecvParams *p, Error **errp)
offset, block->used_length);
return -1;
}
- p->pages->offset[i] = offset;
+ p->normal[i] = offset;
}
return 0;
@@ -1022,6 +1014,8 @@ int multifd_load_cleanup(Error **errp)
p->packet = NULL;
g_free(p->iov);
p->iov = NULL;
+ g_free(p->normal);
+ p->normal = NULL;
multifd_recv_state->ops->recv_cleanup(p);
}
qemu_sem_destroy(&multifd_recv_state->sem_sync);
@@ -1095,13 +1089,13 @@ static void *multifd_recv_thread(void *opaque)
flags = p->flags;
/* recv methods don't know how to handle the SYNC flag */
p->flags &= ~MULTIFD_FLAG_SYNC;
- trace_multifd_recv(p->id, p->packet_num, p->pages->num, flags,
+ trace_multifd_recv(p->id, p->packet_num, p->normal_num, flags,
p->next_packet_size);
p->num_packets++;
- p->num_pages += p->pages->num;
+ p->total_normal_pages += p->normal_num;
qemu_mutex_unlock(&p->mutex);
- if (p->pages->num) {
+ if (p->normal_num) {
ret = multifd_recv_state->ops->recv_pages(p, &local_err);
if (ret != 0) {
break;
@@ -1123,7 +1117,7 @@ static void *multifd_recv_thread(void *opaque)
qemu_mutex_unlock(&p->mutex);
rcu_unregister_thread();
- trace_multifd_recv_thread_end(p->id, p->num_packets, p->num_pages);
+ trace_multifd_recv_thread_end(p->id, p->num_packets, p->total_normal_pages);
return NULL;
}
@@ -1161,6 +1155,7 @@ int multifd_load_setup(Error **errp)
p->packet = g_malloc0(p->packet_len);
p->name = g_strdup_printf("multifdrecv_%d", i);
p->iov = g_new0(struct iovec, page_count);
+ p->normal = g_new0(ram_addr_t, page_count);
}
for (i = 0; i < thread_count; i++) {
--
2.34.1
next prev parent reply other threads:[~2022-01-27 15:49 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-27 15:05 [PULL 00/38] Migration 20220127 patches Juan Quintela
2022-01-27 15:05 ` [PULL 01/38] migration: All this fields are unsigned Juan Quintela
2022-01-27 15:05 ` [PULL 02/38] migration: We only need last_stage in two places Juan Quintela
2022-01-27 15:05 ` [PULL 03/38] migration: ram_release_pages() always receive 1 page as argument Juan Quintela
2022-01-27 15:05 ` [PULL 04/38] migration: Remove masking for compression Juan Quintela
2022-01-27 15:05 ` [PULL 05/38] migration: simplify do_compress_ram_page Juan Quintela
2022-01-27 15:05 ` [PULL 06/38] migration: Move ram_release_pages() call to save_zero_page_to_file() Juan Quintela
2022-01-27 15:05 ` [PULL 07/38] multifd: Use proper maximum compression values Juan Quintela
2022-01-27 15:05 ` [PULL 08/38] multifd: Move iov from pages to params Juan Quintela
2022-01-27 15:05 ` [PULL 09/38] multifd: Make zlib use iov's Juan Quintela
2022-01-27 15:05 ` [PULL 10/38] multifd: Make zstd " Juan Quintela
2022-01-27 15:05 ` [PULL 11/38] multifd: Remove send_write() method Juan Quintela
2022-01-27 15:05 ` [PULL 12/38] multifd: Use a single writev on the send side Juan Quintela
2022-01-27 15:05 ` [PULL 13/38] multifd: Unfold "used" variable by its value Juan Quintela
2022-01-27 15:05 ` [PULL 14/38] multifd: Use normal pages array on the send side Juan Quintela
2022-01-27 15:05 ` Juan Quintela [this message]
2022-01-27 15:05 ` [PULL 16/38] multifd: recv side only needs the RAMBlock host address Juan Quintela
2022-01-27 15:05 ` [PULL 17/38] multifd: Rename pages_used to normal_pages Juan Quintela
2022-01-27 15:05 ` [PULL 18/38] Remove unnecessary minimum_version_id_old fields Juan Quintela
2022-02-15 17:13 ` Peter Maydell
2022-02-15 17:34 ` Cédric Le Goater
2022-02-15 17:59 ` Peter Maydell
2022-01-27 15:05 ` [PULL 19/38] migration/migration.c: Add missed default error handler for migration state Juan Quintela
2022-01-27 15:05 ` [PULL 20/38] migration/migration.c: Avoid COLO boot in postcopy migration Juan Quintela
2022-01-27 15:05 ` [PULL 21/38] migration/migration.c: Remove the MIGRATION_STATUS_ACTIVE when migration finished Juan Quintela
2022-01-27 15:05 ` [PULL 22/38] migration: Report the error returned when save_live_iterate fails Juan Quintela
2022-01-27 15:05 ` [PULL 23/38] migration: Add canary to VMSTATE_END_OF_LIST Juan Quintela
2022-01-27 15:05 ` [PULL 24/38] migration: Perform vmsd structure check during tests Juan Quintela
2022-01-27 15:05 ` [PULL 25/38] migration/ram: clean up unused comment Juan Quintela
2022-01-27 15:05 ` [PULL 26/38] migration: Drop dead code of ram_debug_dump_bitmap() Juan Quintela
2022-01-27 15:05 ` [PULL 27/38] migration: Don't return for postcopy_chunk_hostpages() Juan Quintela
2022-01-27 15:05 ` [PULL 28/38] migration: Drop postcopy_chunk_hostpages() Juan Quintela
2022-01-27 15:05 ` [PULL 29/38] migration: Do chunk page in postcopy_each_ram_send_discard() Juan Quintela
2022-01-27 15:05 ` [PULL 30/38] migration: Drop return code for disgard ram process Juan Quintela
2022-01-27 15:05 ` [PULL 31/38] migration: Don't return for postcopy_send_discard_bm_ram() Juan Quintela
2022-01-27 15:05 ` [PULL 32/38] migration: Introduce ram_transferred_add() Juan Quintela
2022-01-27 15:05 ` [PULL 33/38] migration: Tally pre-copy, downtime and post-copy bytes independently Juan Quintela
2022-01-27 15:05 ` [PULL 34/38] migration: No off-by-one for pss->page update in host page size Juan Quintela
2022-01-27 15:05 ` [PULL 35/38] migration: Enable UFFD_FEATURE_THREAD_ID even without blocktime feat Juan Quintela
2022-01-27 15:05 ` [PULL 36/38] migration: Add postcopy_has_request() Juan Quintela
2022-01-27 15:05 ` [PULL 37/38] migration: Simplify unqueue_page() Juan Quintela
2022-01-27 15:05 ` [PULL 38/38] migration: Move temp page setup and cleanup into separate functions Juan Quintela
2022-01-28 11:05 ` [PULL 00/38] Migration 20220127 patches Peter Maydell
2022-01-31 9:03 ` Juan Quintela
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220127150548.20595-16-quintela@redhat.com \
--to=quintela@redhat.com \
--cc=Andrew.Baumann@microsoft.com \
--cc=alistair@alistair23.me \
--cc=ani@anisinha.ca \
--cc=armbru@redhat.com \
--cc=atar4qemu@gmail.com \
--cc=aurelien@aurel32.net \
--cc=clg@kaod.org \
--cc=danielhb413@gmail.com \
--cc=david@gibson.dropbear.id.au \
--cc=dgilbert@redhat.com \
--cc=eblake@redhat.com \
--cc=edgar.iglesias@gmail.com \
--cc=f4bug@amsat.org \
--cc=fam@euphon.net \
--cc=fnu.vikram@xilinx.com \
--cc=groug@kaod.org \
--cc=hare@suse.com \
--cc=imammedo@redhat.com \
--cc=jasowang@redhat.com \
--cc=kraxel@redhat.com \
--cc=laurent@vivier.eu \
--cc=mark.cave-ayland@ilande.co.uk \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=peterx@redhat.com \
--cc=pisa@cmp.felk.cvut.cz \
--cc=qemu-arm@nongnu.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=shorne@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).