[PATCH v2 0/6] hw/arm: zynqmp: Add CRF and APU control to support PSCI

[PATCH v2 0/6] hw/arm: zynqmp: Add CRF and APU control to support PSCI

[Edgar E. Iglesias]

From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>

This adds the necessary modeling to support some of our firmware
tests at EL3 implementing PSCI (TBM). These are the test-cases
that were previously relying on QEMU's builtin PSCI emulation.

I've only tested this on top of Peter's recent PSCI emulation fixes.

Cheers,
Edgar

ChangeLog:

v1 -> v2:
* crf: Change APU_MAX_CPU to CRF_MAX_CPU
* crf: Remove empty interfaces
* crf: Add include guards
* apu-ctrl: Change NUM_CPUS to APU_MAX_CPU
* apu-ctrl: Fix indentation
* apu-ctrl: Remove empty interfaces 
* apu-ctrl: Add include guards 
* xlnx-zynqmp: Add comment clarifying SER/DESerializer

Edgar E. Iglesias (6):
  hw/arm/xlnx-zynqmp: Add an unimplemented SERDES area
  target/arm: Make rvbar settable after realize
  hw/misc: Add a model of the Xilinx ZynqMP CRF
  hw/arm/xlnx-zynqmp: Connect the ZynqMP CRF
  hw/misc: Add a model of the Xilinx ZynqMP APU Control
  hw/arm/xlnx-zynqmp: Connect the ZynqMP APU Control

 include/hw/arm/xlnx-zynqmp.h           |   4 +
 include/hw/misc/xlnx-zynqmp-apu-ctrl.h |  95 +++++++++
 include/hw/misc/xlnx-zynqmp-crf.h      | 213 ++++++++++++++++++++
 hw/arm/xlnx-zynqmp.c                   |  46 ++++-
 hw/misc/xlnx-zynqmp-apu-ctrl.c         | 254 +++++++++++++++++++++++
 hw/misc/xlnx-zynqmp-crf.c              | 267 +++++++++++++++++++++++++
 target/arm/cpu.c                       |   7 +-
 hw/misc/meson.build                    |   2 +
 8 files changed, 882 insertions(+), 6 deletions(-)
 create mode 100644 include/hw/misc/xlnx-zynqmp-apu-ctrl.h
 create mode 100644 include/hw/misc/xlnx-zynqmp-crf.h
 create mode 100644 hw/misc/xlnx-zynqmp-apu-ctrl.c
 create mode 100644 hw/misc/xlnx-zynqmp-crf.c

-- 
2.25.1

[PATCH v2 1/6] hw/arm/xlnx-zynqmp: Add an unimplemented SERDES area

[Edgar E. Iglesias]

From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>

Add an unimplemented SERDES (Serializer/Deserializer) area.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
---
 include/hw/arm/xlnx-zynqmp.h | 2 +-
 hw/arm/xlnx-zynqmp.c         | 5 +++++
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h
index 062e637fe4..99ceb8a609 100644
--- a/include/hw/arm/xlnx-zynqmp.h
+++ b/include/hw/arm/xlnx-zynqmp.h
@@ -84,7 +84,7 @@ OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP)
 /*
  * Unimplemented mmio regions needed to boot some images.
  */
-#define XLNX_ZYNQMP_NUM_UNIMP_AREAS 1
+#define XLNX_ZYNQMP_NUM_UNIMP_AREAS 2
 
 struct XlnxZynqMPState {
     /*< private >*/
diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
index 17305fe7b7..3dae51a786 100644
--- a/hw/arm/xlnx-zynqmp.c
+++ b/hw/arm/xlnx-zynqmp.c
@@ -51,6 +51,10 @@
 #define QSPI_IRQ            15
 #define QSPI_DMA_ADDR       0xff0f0800
 
+/* Serializer/Deserializer.  */
+#define SERDES_ADDR         0xfd400000
+#define SERDES_SIZE         0x20000
+
 #define DP_ADDR             0xfd4a0000
 #define DP_IRQ              113
 
@@ -284,6 +288,7 @@ static void xlnx_zynqmp_create_unimp_mmio(XlnxZynqMPState *s)
         hwaddr size;
     } unimp_areas[ARRAY_SIZE(s->mr_unimp)] = {
         { .name = "apu", APU_ADDR, APU_SIZE },
+        { .name = "serdes", SERDES_ADDR, SERDES_SIZE },
     };
     unsigned int nr;
 
-- 
2.25.1

[PATCH v2 2/6] target/arm: Make rvbar settable after realize

[Edgar E. Iglesias]

From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>

Make the rvbar property settable after realize. This is done
in preparation to model the ZynqMP's runtime configurable rvbar.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
---
 target/arm/cpu.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index 5a9c02a256..e30ae088fe 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -1128,9 +1128,6 @@ static Property arm_cpu_reset_cbar_property =
 static Property arm_cpu_reset_hivecs_property =
             DEFINE_PROP_BOOL("reset-hivecs", ARMCPU, reset_hivecs, false);
 
-static Property arm_cpu_rvbar_property =
-            DEFINE_PROP_UINT64("rvbar", ARMCPU, rvbar, 0);
-
 #ifndef CONFIG_USER_ONLY
 static Property arm_cpu_has_el2_property =
             DEFINE_PROP_BOOL("has_el2", ARMCPU, has_el2, true);
@@ -1233,7 +1230,9 @@ void arm_cpu_post_init(Object *obj)
     }
 
     if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) {
-        qdev_property_add_static(DEVICE(obj), &arm_cpu_rvbar_property);
+        object_property_add_uint64_ptr(obj, "rvbar",
+                                       &cpu->rvbar,
+                                       OBJ_PROP_FLAG_READWRITE);
     }
 
 #ifndef CONFIG_USER_ONLY
-- 
2.25.1

Re: [PATCH v2 2/6] target/arm: Make rvbar settable after realize

[Luc Michel]

Hi Edgar,

Oops I mistakenly answered on v1 :)

On 15:01 Thu 03 Feb     , Edgar E. Iglesias wrote:
> From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>
> 
> Make the rvbar property settable after realize. This is done
> in preparation to model the ZynqMP's runtime configurable rvbar.
> 
> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
> ---
>  target/arm/cpu.c | 7 +++----
>  1 file changed, 3 insertions(+), 4 deletions(-)
> 
> diff --git a/target/arm/cpu.c b/target/arm/cpu.c
> index 5a9c02a256..e30ae088fe 100644
> --- a/target/arm/cpu.c
> +++ b/target/arm/cpu.c
> @@ -1128,9 +1128,6 @@ static Property arm_cpu_reset_cbar_property =
>  static Property arm_cpu_reset_hivecs_property =
>              DEFINE_PROP_BOOL("reset-hivecs", ARMCPU, reset_hivecs, false);
>  
> -static Property arm_cpu_rvbar_property =
> -            DEFINE_PROP_UINT64("rvbar", ARMCPU, rvbar, 0);
> -
>  #ifndef CONFIG_USER_ONLY
>  static Property arm_cpu_has_el2_property =
>              DEFINE_PROP_BOOL("has_el2", ARMCPU, has_el2, true);
> @@ -1233,7 +1230,9 @@ void arm_cpu_post_init(Object *obj)
>      }
>  
>      if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) {
> -        qdev_property_add_static(DEVICE(obj), &arm_cpu_rvbar_property);
> +        object_property_add_uint64_ptr(obj, "rvbar",
> +                                       &cpu->rvbar,
> +                                       OBJ_PROP_FLAG_READWRITE);

I think you may have a problem here. cpu->rvbar is used to define the
reset value of the rvbar_elx registers in register_cp_regs_for_features.
This is done at realize time. Changing the rvbar property after realize
would fail to update the rvbar_elx register values.

I guess you should also switch to a .readfn instead of a .resetvalue for
those registers.

-- 
Luc


>      }
>  
>  #ifndef CONFIG_USER_ONLY
> -- 
> 2.25.1
> 

-- 

[PATCH v2 3/6] hw/misc: Add a model of the Xilinx ZynqMP CRF

[Edgar E. Iglesias]

From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>

Add a model of the Xilinx ZynqMP CRF. At the moment this
is mostly a stub model.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
---
 include/hw/misc/xlnx-zynqmp-crf.h | 213 ++++++++++++++++++++++++
 hw/misc/xlnx-zynqmp-crf.c         | 267 ++++++++++++++++++++++++++++++
 hw/misc/meson.build               |   1 +
 3 files changed, 481 insertions(+)
 create mode 100644 include/hw/misc/xlnx-zynqmp-crf.h
 create mode 100644 hw/misc/xlnx-zynqmp-crf.c

diff --git a/include/hw/misc/xlnx-zynqmp-crf.h b/include/hw/misc/xlnx-zynqmp-crf.h
new file mode 100644
index 0000000000..b1ec010da1
--- /dev/null
+++ b/include/hw/misc/xlnx-zynqmp-crf.h
@@ -0,0 +1,213 @@
+/*
+ * QEMU model of the CRF - Clock Reset FPD.
+ *
+ * Copyright (c) 2022 Xilinx Inc.
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ * Written by Edgar E. Iglesias <edgar.iglesias@xilinx.com>
+ */
+#ifndef HW_MISC_XLNX_ZYNQMP_CRF_H
+#define HW_MISC_XLNX_ZYNQMP_CRF_H
+
+#include "hw/sysbus.h"
+#include "hw/register.h"
+
+#define TYPE_XLNX_ZYNQMP_CRF "xlnx.zynqmp_crf"
+
+#define XILINX_CRF(obj) \
+     OBJECT_CHECK(XlnxZynqMPCRF, (obj), TYPE_XLNX_ZYNQMP_CRF)
+
+REG32(ERR_CTRL, 0x0)
+    FIELD(ERR_CTRL, SLVERR_ENABLE, 0, 1)
+REG32(IR_STATUS, 0x4)
+    FIELD(IR_STATUS, ADDR_DECODE_ERR, 0, 1)
+REG32(IR_MASK, 0x8)
+    FIELD(IR_MASK, ADDR_DECODE_ERR, 0, 1)
+REG32(IR_ENABLE, 0xc)
+    FIELD(IR_ENABLE, ADDR_DECODE_ERR, 0, 1)
+REG32(IR_DISABLE, 0x10)
+    FIELD(IR_DISABLE, ADDR_DECODE_ERR, 0, 1)
+REG32(CRF_WPROT, 0x1c)
+    FIELD(CRF_WPROT, ACTIVE, 0, 1)
+REG32(APLL_CTRL, 0x20)
+    FIELD(APLL_CTRL, POST_SRC, 24, 3)
+    FIELD(APLL_CTRL, PRE_SRC, 20, 3)
+    FIELD(APLL_CTRL, CLKOUTDIV, 17, 1)
+    FIELD(APLL_CTRL, DIV2, 16, 1)
+    FIELD(APLL_CTRL, FBDIV, 8, 7)
+    FIELD(APLL_CTRL, BYPASS, 3, 1)
+    FIELD(APLL_CTRL, RESET, 0, 1)
+REG32(APLL_CFG, 0x24)
+    FIELD(APLL_CFG, LOCK_DLY, 25, 7)
+    FIELD(APLL_CFG, LOCK_CNT, 13, 10)
+    FIELD(APLL_CFG, LFHF, 10, 2)
+    FIELD(APLL_CFG, CP, 5, 4)
+    FIELD(APLL_CFG, RES, 0, 4)
+REG32(APLL_FRAC_CFG, 0x28)
+    FIELD(APLL_FRAC_CFG, ENABLED, 31, 1)
+    FIELD(APLL_FRAC_CFG, SEED, 22, 3)
+    FIELD(APLL_FRAC_CFG, ALGRTHM, 19, 1)
+    FIELD(APLL_FRAC_CFG, ORDER, 18, 1)
+    FIELD(APLL_FRAC_CFG, DATA, 0, 16)
+REG32(DPLL_CTRL, 0x2c)
+    FIELD(DPLL_CTRL, POST_SRC, 24, 3)
+    FIELD(DPLL_CTRL, PRE_SRC, 20, 3)
+    FIELD(DPLL_CTRL, CLKOUTDIV, 17, 1)
+    FIELD(DPLL_CTRL, DIV2, 16, 1)
+    FIELD(DPLL_CTRL, FBDIV, 8, 7)
+    FIELD(DPLL_CTRL, BYPASS, 3, 1)
+    FIELD(DPLL_CTRL, RESET, 0, 1)
+REG32(DPLL_CFG, 0x30)
+    FIELD(DPLL_CFG, LOCK_DLY, 25, 7)
+    FIELD(DPLL_CFG, LOCK_CNT, 13, 10)
+    FIELD(DPLL_CFG, LFHF, 10, 2)
+    FIELD(DPLL_CFG, CP, 5, 4)
+    FIELD(DPLL_CFG, RES, 0, 4)
+REG32(DPLL_FRAC_CFG, 0x34)
+    FIELD(DPLL_FRAC_CFG, ENABLED, 31, 1)
+    FIELD(DPLL_FRAC_CFG, SEED, 22, 3)
+    FIELD(DPLL_FRAC_CFG, ALGRTHM, 19, 1)
+    FIELD(DPLL_FRAC_CFG, ORDER, 18, 1)
+    FIELD(DPLL_FRAC_CFG, DATA, 0, 16)
+REG32(VPLL_CTRL, 0x38)
+    FIELD(VPLL_CTRL, POST_SRC, 24, 3)
+    FIELD(VPLL_CTRL, PRE_SRC, 20, 3)
+    FIELD(VPLL_CTRL, CLKOUTDIV, 17, 1)
+    FIELD(VPLL_CTRL, DIV2, 16, 1)
+    FIELD(VPLL_CTRL, FBDIV, 8, 7)
+    FIELD(VPLL_CTRL, BYPASS, 3, 1)
+    FIELD(VPLL_CTRL, RESET, 0, 1)
+REG32(VPLL_CFG, 0x3c)
+    FIELD(VPLL_CFG, LOCK_DLY, 25, 7)
+    FIELD(VPLL_CFG, LOCK_CNT, 13, 10)
+    FIELD(VPLL_CFG, LFHF, 10, 2)
+    FIELD(VPLL_CFG, CP, 5, 4)
+    FIELD(VPLL_CFG, RES, 0, 4)
+REG32(VPLL_FRAC_CFG, 0x40)
+    FIELD(VPLL_FRAC_CFG, ENABLED, 31, 1)
+    FIELD(VPLL_FRAC_CFG, SEED, 22, 3)
+    FIELD(VPLL_FRAC_CFG, ALGRTHM, 19, 1)
+    FIELD(VPLL_FRAC_CFG, ORDER, 18, 1)
+    FIELD(VPLL_FRAC_CFG, DATA, 0, 16)
+REG32(PLL_STATUS, 0x44)
+    FIELD(PLL_STATUS, VPLL_STABLE, 5, 1)
+    FIELD(PLL_STATUS, DPLL_STABLE, 4, 1)
+    FIELD(PLL_STATUS, APLL_STABLE, 3, 1)
+    FIELD(PLL_STATUS, VPLL_LOCK, 2, 1)
+    FIELD(PLL_STATUS, DPLL_LOCK, 1, 1)
+    FIELD(PLL_STATUS, APLL_LOCK, 0, 1)
+REG32(APLL_TO_LPD_CTRL, 0x48)
+    FIELD(APLL_TO_LPD_CTRL, DIVISOR0, 8, 6)
+REG32(DPLL_TO_LPD_CTRL, 0x4c)
+    FIELD(DPLL_TO_LPD_CTRL, DIVISOR0, 8, 6)
+REG32(VPLL_TO_LPD_CTRL, 0x50)
+    FIELD(VPLL_TO_LPD_CTRL, DIVISOR0, 8, 6)
+REG32(ACPU_CTRL, 0x60)
+    FIELD(ACPU_CTRL, CLKACT_HALF, 25, 1)
+    FIELD(ACPU_CTRL, CLKACT_FULL, 24, 1)
+    FIELD(ACPU_CTRL, DIVISOR0, 8, 6)
+    FIELD(ACPU_CTRL, SRCSEL, 0, 3)
+REG32(DBG_TRACE_CTRL, 0x64)
+    FIELD(DBG_TRACE_CTRL, CLKACT, 24, 1)
+    FIELD(DBG_TRACE_CTRL, DIVISOR0, 8, 6)
+    FIELD(DBG_TRACE_CTRL, SRCSEL, 0, 3)
+REG32(DBG_FPD_CTRL, 0x68)
+    FIELD(DBG_FPD_CTRL, CLKACT, 24, 1)
+    FIELD(DBG_FPD_CTRL, DIVISOR0, 8, 6)
+    FIELD(DBG_FPD_CTRL, SRCSEL, 0, 3)
+REG32(DP_VIDEO_REF_CTRL, 0x70)
+    FIELD(DP_VIDEO_REF_CTRL, CLKACT, 24, 1)
+    FIELD(DP_VIDEO_REF_CTRL, DIVISOR1, 16, 6)
+    FIELD(DP_VIDEO_REF_CTRL, DIVISOR0, 8, 6)
+    FIELD(DP_VIDEO_REF_CTRL, SRCSEL, 0, 3)
+REG32(DP_AUDIO_REF_CTRL, 0x74)
+    FIELD(DP_AUDIO_REF_CTRL, CLKACT, 24, 1)
+    FIELD(DP_AUDIO_REF_CTRL, DIVISOR1, 16, 6)
+    FIELD(DP_AUDIO_REF_CTRL, DIVISOR0, 8, 6)
+    FIELD(DP_AUDIO_REF_CTRL, SRCSEL, 0, 3)
+REG32(DP_STC_REF_CTRL, 0x7c)
+    FIELD(DP_STC_REF_CTRL, CLKACT, 24, 1)
+    FIELD(DP_STC_REF_CTRL, DIVISOR1, 16, 6)
+    FIELD(DP_STC_REF_CTRL, DIVISOR0, 8, 6)
+    FIELD(DP_STC_REF_CTRL, SRCSEL, 0, 3)
+REG32(DDR_CTRL, 0x80)
+    FIELD(DDR_CTRL, CLKACT, 24, 1)
+    FIELD(DDR_CTRL, DIVISOR0, 8, 6)
+    FIELD(DDR_CTRL, SRCSEL, 0, 3)
+REG32(GPU_REF_CTRL, 0x84)
+    FIELD(GPU_REF_CTRL, PP1_CLKACT, 26, 1)
+    FIELD(GPU_REF_CTRL, PP0_CLKACT, 25, 1)
+    FIELD(GPU_REF_CTRL, CLKACT, 24, 1)
+    FIELD(GPU_REF_CTRL, DIVISOR0, 8, 6)
+    FIELD(GPU_REF_CTRL, SRCSEL, 0, 3)
+REG32(SATA_REF_CTRL, 0xa0)
+    FIELD(SATA_REF_CTRL, CLKACT, 24, 1)
+    FIELD(SATA_REF_CTRL, DIVISOR0, 8, 6)
+    FIELD(SATA_REF_CTRL, SRCSEL, 0, 3)
+REG32(PCIE_REF_CTRL, 0xb4)
+    FIELD(PCIE_REF_CTRL, CLKACT, 24, 1)
+    FIELD(PCIE_REF_CTRL, DIVISOR0, 8, 6)
+    FIELD(PCIE_REF_CTRL, SRCSEL, 0, 3)
+REG32(GDMA_REF_CTRL, 0xb8)
+    FIELD(GDMA_REF_CTRL, CLKACT, 24, 1)
+    FIELD(GDMA_REF_CTRL, DIVISOR0, 8, 6)
+    FIELD(GDMA_REF_CTRL, SRCSEL, 0, 3)
+REG32(DPDMA_REF_CTRL, 0xbc)
+    FIELD(DPDMA_REF_CTRL, CLKACT, 24, 1)
+    FIELD(DPDMA_REF_CTRL, DIVISOR0, 8, 6)
+    FIELD(DPDMA_REF_CTRL, SRCSEL, 0, 3)
+REG32(TOPSW_MAIN_CTRL, 0xc0)
+    FIELD(TOPSW_MAIN_CTRL, CLKACT, 24, 1)
+    FIELD(TOPSW_MAIN_CTRL, DIVISOR0, 8, 6)
+    FIELD(TOPSW_MAIN_CTRL, SRCSEL, 0, 3)
+REG32(TOPSW_LSBUS_CTRL, 0xc4)
+    FIELD(TOPSW_LSBUS_CTRL, CLKACT, 24, 1)
+    FIELD(TOPSW_LSBUS_CTRL, DIVISOR0, 8, 6)
+    FIELD(TOPSW_LSBUS_CTRL, SRCSEL, 0, 3)
+REG32(DBG_TSTMP_CTRL, 0xf8)
+    FIELD(DBG_TSTMP_CTRL, DIVISOR0, 8, 6)
+    FIELD(DBG_TSTMP_CTRL, SRCSEL, 0, 3)
+REG32(RST_FPD_TOP, 0x100)
+    FIELD(RST_FPD_TOP, PCIE_CFG_RESET, 19, 1)
+    FIELD(RST_FPD_TOP, PCIE_BRIDGE_RESET, 18, 1)
+    FIELD(RST_FPD_TOP, PCIE_CTRL_RESET, 17, 1)
+    FIELD(RST_FPD_TOP, DP_RESET, 16, 1)
+    FIELD(RST_FPD_TOP, SWDT_RESET, 15, 1)
+    FIELD(RST_FPD_TOP, AFI_FM5_RESET, 12, 1)
+    FIELD(RST_FPD_TOP, AFI_FM4_RESET, 11, 1)
+    FIELD(RST_FPD_TOP, AFI_FM3_RESET, 10, 1)
+    FIELD(RST_FPD_TOP, AFI_FM2_RESET, 9, 1)
+    FIELD(RST_FPD_TOP, AFI_FM1_RESET, 8, 1)
+    FIELD(RST_FPD_TOP, AFI_FM0_RESET, 7, 1)
+    FIELD(RST_FPD_TOP, GDMA_RESET, 6, 1)
+    FIELD(RST_FPD_TOP, GPU_PP1_RESET, 5, 1)
+    FIELD(RST_FPD_TOP, GPU_PP0_RESET, 4, 1)
+    FIELD(RST_FPD_TOP, GPU_RESET, 3, 1)
+    FIELD(RST_FPD_TOP, GT_RESET, 2, 1)
+    FIELD(RST_FPD_TOP, SATA_RESET, 1, 1)
+REG32(RST_FPD_APU, 0x104)
+    FIELD(RST_FPD_APU, ACPU3_PWRON_RESET, 13, 1)
+    FIELD(RST_FPD_APU, ACPU2_PWRON_RESET, 12, 1)
+    FIELD(RST_FPD_APU, ACPU1_PWRON_RESET, 11, 1)
+    FIELD(RST_FPD_APU, ACPU0_PWRON_RESET, 10, 1)
+    FIELD(RST_FPD_APU, APU_L2_RESET, 8, 1)
+    FIELD(RST_FPD_APU, ACPU3_RESET, 3, 1)
+    FIELD(RST_FPD_APU, ACPU2_RESET, 2, 1)
+    FIELD(RST_FPD_APU, ACPU1_RESET, 1, 1)
+    FIELD(RST_FPD_APU, ACPU0_RESET, 0, 1)
+REG32(RST_DDR_SS, 0x108)
+    FIELD(RST_DDR_SS, DDR_RESET, 3, 1)
+    FIELD(RST_DDR_SS, APM_RESET, 2, 1)
+
+#define CRF_R_MAX (R_RST_DDR_SS + 1)
+
+typedef struct XlnxZynqMPCRF {
+    SysBusDevice parent_obj;
+    MemoryRegion iomem;
+    qemu_irq irq_ir;
+
+    RegisterInfoArray *reg_array;
+    uint32_t regs[CRF_R_MAX];
+    RegisterInfo regs_info[CRF_R_MAX];
+} XlnxZynqMPCRF;
+
+#endif
diff --git a/hw/misc/xlnx-zynqmp-crf.c b/hw/misc/xlnx-zynqmp-crf.c
new file mode 100644
index 0000000000..03fe433e26
--- /dev/null
+++ b/hw/misc/xlnx-zynqmp-crf.c
@@ -0,0 +1,267 @@
+/*
+ * QEMU model of the CRF - Clock Reset FPD.
+ *
+ * Copyright (c) 2022 Xilinx Inc.
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ * Written by Edgar E. Iglesias <edgar.iglesias@xilinx.com>
+ */
+
+#include "qemu/osdep.h"
+#include "hw/sysbus.h"
+#include "hw/register.h"
+#include "qemu/bitops.h"
+#include "qemu/log.h"
+#include "migration/vmstate.h"
+#include "hw/irq.h"
+#include "hw/misc/xlnx-zynqmp-crf.h"
+#include "target/arm/arm-powerctl.h"
+
+#ifndef XILINX_CRF_ERR_DEBUG
+#define XILINX_CRF_ERR_DEBUG 1
+#endif
+
+#define CRF_MAX_CPU    4
+
+static void ir_update_irq(XlnxZynqMPCRF *s)
+{
+    bool pending = s->regs[R_IR_STATUS] & ~s->regs[R_IR_MASK];
+    qemu_set_irq(s->irq_ir, pending);
+}
+
+static void ir_status_postw(RegisterInfo *reg, uint64_t val64)
+{
+    XlnxZynqMPCRF *s = XILINX_CRF(reg->opaque);
+    ir_update_irq(s);
+}
+
+static uint64_t ir_enable_prew(RegisterInfo *reg, uint64_t val64)
+{
+    XlnxZynqMPCRF *s = XILINX_CRF(reg->opaque);
+    uint32_t val = val64;
+
+    s->regs[R_IR_MASK] &= ~val;
+    ir_update_irq(s);
+    return 0;
+}
+
+static uint64_t ir_disable_prew(RegisterInfo *reg, uint64_t val64)
+{
+    XlnxZynqMPCRF *s = XILINX_CRF(reg->opaque);
+    uint32_t val = val64;
+
+    s->regs[R_IR_MASK] |= val;
+    ir_update_irq(s);
+    return 0;
+}
+
+static uint64_t rst_fpd_apu_prew(RegisterInfo *reg, uint64_t val64)
+{
+    XlnxZynqMPCRF *s = XILINX_CRF(reg->opaque);
+    uint32_t val = val64;
+    uint32_t val_old = s->regs[R_RST_FPD_APU];
+    unsigned int i;
+
+    for (i = 0; i < CRF_MAX_CPU; i++) {
+        uint32_t mask = (1 << (R_RST_FPD_APU_ACPU0_RESET_SHIFT + i));
+
+        if ((val ^ val_old) & mask) {
+            if (val & mask) {
+                arm_set_cpu_off(i);
+            } else {
+                arm_set_cpu_on_and_reset(i);
+            }
+        }
+    }
+    return val64;
+}
+
+static const RegisterAccessInfo crf_regs_info[] = {
+    {   .name = "ERR_CTRL",  .addr = A_ERR_CTRL,
+    },{ .name = "IR_STATUS",  .addr = A_IR_STATUS,
+        .w1c = 0x1,
+        .post_write = ir_status_postw,
+    },{ .name = "IR_MASK",  .addr = A_IR_MASK,
+        .reset = 0x1,
+        .ro = 0x1,
+    },{ .name = "IR_ENABLE",  .addr = A_IR_ENABLE,
+        .pre_write = ir_enable_prew,
+    },{ .name = "IR_DISABLE",  .addr = A_IR_DISABLE,
+        .pre_write = ir_disable_prew,
+    },{ .name = "CRF_WPROT",  .addr = A_CRF_WPROT,
+    },{ .name = "APLL_CTRL",  .addr = A_APLL_CTRL,
+        .reset = 0x12c09,
+        .rsvd = 0xf88c80f6,
+    },{ .name = "APLL_CFG",  .addr = A_APLL_CFG,
+        .rsvd = 0x1801210,
+    },{ .name = "APLL_FRAC_CFG",  .addr = A_APLL_FRAC_CFG,
+        .rsvd = 0x7e330000,
+    },{ .name = "DPLL_CTRL",  .addr = A_DPLL_CTRL,
+        .reset = 0x2c09,
+        .rsvd = 0xf88c80f6,
+    },{ .name = "DPLL_CFG",  .addr = A_DPLL_CFG,
+        .rsvd = 0x1801210,
+    },{ .name = "DPLL_FRAC_CFG",  .addr = A_DPLL_FRAC_CFG,
+        .rsvd = 0x7e330000,
+    },{ .name = "VPLL_CTRL",  .addr = A_VPLL_CTRL,
+        .reset = 0x12809,
+        .rsvd = 0xf88c80f6,
+    },{ .name = "VPLL_CFG",  .addr = A_VPLL_CFG,
+        .rsvd = 0x1801210,
+    },{ .name = "VPLL_FRAC_CFG",  .addr = A_VPLL_FRAC_CFG,
+        .rsvd = 0x7e330000,
+    },{ .name = "PLL_STATUS",  .addr = A_PLL_STATUS,
+        .reset = 0x3f,
+        .rsvd = 0xc0,
+        .ro = 0x3f,
+    },{ .name = "APLL_TO_LPD_CTRL",  .addr = A_APLL_TO_LPD_CTRL,
+        .reset = 0x400,
+        .rsvd = 0xc0ff,
+    },{ .name = "DPLL_TO_LPD_CTRL",  .addr = A_DPLL_TO_LPD_CTRL,
+        .reset = 0x400,
+        .rsvd = 0xc0ff,
+    },{ .name = "VPLL_TO_LPD_CTRL",  .addr = A_VPLL_TO_LPD_CTRL,
+        .reset = 0x400,
+        .rsvd = 0xc0ff,
+    },{ .name = "ACPU_CTRL",  .addr = A_ACPU_CTRL,
+        .reset = 0x3000400,
+        .rsvd = 0xfcffc0f8,
+    },{ .name = "DBG_TRACE_CTRL",  .addr = A_DBG_TRACE_CTRL,
+        .reset = 0x2500,
+        .rsvd = 0xfeffc0f8,
+    },{ .name = "DBG_FPD_CTRL",  .addr = A_DBG_FPD_CTRL,
+        .reset = 0x1002500,
+        .rsvd = 0xfeffc0f8,
+    },{ .name = "DP_VIDEO_REF_CTRL",  .addr = A_DP_VIDEO_REF_CTRL,
+        .reset = 0x1002300,
+        .rsvd = 0xfec0c0f8,
+    },{ .name = "DP_AUDIO_REF_CTRL",  .addr = A_DP_AUDIO_REF_CTRL,
+        .reset = 0x1032300,
+        .rsvd = 0xfec0c0f8,
+    },{ .name = "DP_STC_REF_CTRL",  .addr = A_DP_STC_REF_CTRL,
+        .reset = 0x1203200,
+        .rsvd = 0xfec0c0f8,
+    },{ .name = "DDR_CTRL",  .addr = A_DDR_CTRL,
+        .reset = 0x1000500,
+        .rsvd = 0xfeffc0f8,
+    },{ .name = "GPU_REF_CTRL",  .addr = A_GPU_REF_CTRL,
+        .reset = 0x1500,
+        .rsvd = 0xf8ffc0f8,
+    },{ .name = "SATA_REF_CTRL",  .addr = A_SATA_REF_CTRL,
+        .reset = 0x1001600,
+        .rsvd = 0xfeffc0f8,
+    },{ .name = "PCIE_REF_CTRL",  .addr = A_PCIE_REF_CTRL,
+        .reset = 0x1500,
+        .rsvd = 0xfeffc0f8,
+    },{ .name = "GDMA_REF_CTRL",  .addr = A_GDMA_REF_CTRL,
+        .reset = 0x1000500,
+        .rsvd = 0xfeffc0f8,
+    },{ .name = "DPDMA_REF_CTRL",  .addr = A_DPDMA_REF_CTRL,
+        .reset = 0x1000500,
+        .rsvd = 0xfeffc0f8,
+    },{ .name = "TOPSW_MAIN_CTRL",  .addr = A_TOPSW_MAIN_CTRL,
+        .reset = 0x1000400,
+        .rsvd = 0xfeffc0f8,
+    },{ .name = "TOPSW_LSBUS_CTRL",  .addr = A_TOPSW_LSBUS_CTRL,
+        .reset = 0x1000800,
+        .rsvd = 0xfeffc0f8,
+    },{ .name = "DBG_TSTMP_CTRL",  .addr = A_DBG_TSTMP_CTRL,
+        .reset = 0xa00,
+        .rsvd = 0xffffc0f8,
+    },
+    {   .name = "RST_FPD_TOP",  .addr = A_RST_FPD_TOP,
+        .reset = 0xf9ffe,
+        .rsvd = 0xf06001,
+    },{ .name = "RST_FPD_APU",  .addr = A_RST_FPD_APU,
+        .reset = 0x3d0f,
+        .rsvd = 0xc2f0,
+        .pre_write = rst_fpd_apu_prew,
+    },{ .name = "RST_DDR_SS",  .addr = A_RST_DDR_SS,
+        .reset = 0xf,
+        .rsvd = 0xf3,
+    }
+};
+
+static void crf_reset_enter(Object *obj, ResetType type)
+{
+    XlnxZynqMPCRF *s = XILINX_CRF(obj);
+    unsigned int i;
+
+    for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) {
+        register_reset(&s->regs_info[i]);
+    }
+}
+
+static void crf_reset_hold(Object *obj)
+{
+    XlnxZynqMPCRF *s = XILINX_CRF(obj);
+    ir_update_irq(s);
+}
+
+static const MemoryRegionOps crf_ops = {
+    .read = register_read_memory,
+    .write = register_write_memory,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+    },
+};
+
+static void crf_init(Object *obj)
+{
+    XlnxZynqMPCRF *s = XILINX_CRF(obj);
+    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+
+    s->reg_array =
+        register_init_block32(DEVICE(obj), crf_regs_info,
+                              ARRAY_SIZE(crf_regs_info),
+                              s->regs_info, s->regs,
+                              &crf_ops,
+                              XILINX_CRF_ERR_DEBUG,
+                              CRF_R_MAX * 4);
+    sysbus_init_mmio(sbd, &s->reg_array->mem);
+    sysbus_init_irq(sbd, &s->irq_ir);
+}
+
+static void crf_finalize(Object *obj)
+{
+    XlnxZynqMPCRF *s = XILINX_CRF(obj);
+    register_finalize_block(s->reg_array);
+}
+
+static const VMStateDescription vmstate_crf = {
+    .name = TYPE_XLNX_ZYNQMP_CRF,
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .minimum_version_id_old = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32_ARRAY(regs, XlnxZynqMPCRF, CRF_R_MAX),
+        VMSTATE_END_OF_LIST(),
+    }
+};
+
+static void crf_class_init(ObjectClass *klass, void *data)
+{
+    ResettableClass *rc = RESETTABLE_CLASS(klass);
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->vmsd = &vmstate_crf;
+    rc->phases.enter = crf_reset_enter;
+    rc->phases.hold = crf_reset_hold;
+}
+
+static const TypeInfo crf_info = {
+    .name              = TYPE_XLNX_ZYNQMP_CRF,
+    .parent            = TYPE_SYS_BUS_DEVICE,
+    .instance_size     = sizeof(XlnxZynqMPCRF),
+    .class_init        = crf_class_init,
+    .instance_init     = crf_init,
+    .instance_finalize = crf_finalize,
+};
+
+static void crf_register_types(void)
+{
+    type_register_static(&crf_info);
+}
+
+type_init(crf_register_types)
diff --git a/hw/misc/meson.build b/hw/misc/meson.build
index 6dcbe044f3..1927f13a5e 100644
--- a/hw/misc/meson.build
+++ b/hw/misc/meson.build
@@ -84,6 +84,7 @@ softmmu_ss.add(when: 'CONFIG_RASPI', if_true: files(
 ))
 softmmu_ss.add(when: 'CONFIG_SLAVIO', if_true: files('slavio_misc.c'))
 softmmu_ss.add(when: 'CONFIG_ZYNQ', if_true: files('zynq_slcr.c'))
+specific_ss.add(when: 'CONFIG_XLNX_ZYNQMP_ARM', if_true: files('xlnx-zynqmp-crf.c'))
 softmmu_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files(
   'xlnx-versal-xramc.c',
   'xlnx-versal-pmc-iou-slcr.c',
-- 
2.25.1

Re: [PATCH v2 3/6] hw/misc: Add a model of the Xilinx ZynqMP CRF

[Peter Maydell]

On Thu, 3 Feb 2022 at 14:01, Edgar E. Iglesias <edgar.iglesias@gmail.com> wrote:
>
> From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>
>
> Add a model of the Xilinx ZynqMP CRF. At the moment this
> is mostly a stub model.

> +static const VMStateDescription vmstate_crf = {
> +    .name = TYPE_XLNX_ZYNQMP_CRF,
> +    .version_id = 1,
> +    .minimum_version_id = 1,
> +    .minimum_version_id_old = 1,

This is still on my to-review list to look at properly, but
this setting of .minimum_version_id_old is incorrect. The
field is only used if the VMStateDescription sets a non-NULL
load_state_old function, which this one does not.

We cleaned this up in commit 17e313406126, and I'm about
to send a patch which drops the fields entirely.

thanks
-- PMM

Re: [PATCH v2 3/6] hw/misc: Add a model of the Xilinx ZynqMP CRF

[Peter Maydell]

On Thu, 3 Feb 2022 at 14:01, Edgar E. Iglesias <edgar.iglesias@gmail.com> wrote:
>
> From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>
>
> Add a model of the Xilinx ZynqMP CRF. At the moment this
> is mostly a stub model.
>
> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
> ---


> +#define TYPE_XLNX_ZYNQMP_CRF "xlnx.zynqmp_crf"
> +
> +#define XILINX_CRF(obj) \
> +     OBJECT_CHECK(XlnxZynqMPCRF, (obj), TYPE_XLNX_ZYNQMP_CRF)

We prefer the OBJECT_DECLARE_SIMPLE_TYPE rather than directly
defining a cast macro these days. (It also provides a typedef
for you, among other things.)

Apart from that, and dropping minimum_version_id_old,
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

thanks
-- PMM

Re: [PATCH v2 3/6] hw/misc: Add a model of the Xilinx ZynqMP CRF

[Edgar E. Iglesias]

On Fri, Feb 18, 2022 at 01:37:51PM +0000, Peter Maydell wrote:
> On Thu, 3 Feb 2022 at 14:01, Edgar E. Iglesias <edgar.iglesias@gmail.com> wrote:
> >
> > From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>
> >
> > Add a model of the Xilinx ZynqMP CRF. At the moment this
> > is mostly a stub model.
> >
> > Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> > Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
> > ---
> 
> 
> > +#define TYPE_XLNX_ZYNQMP_CRF "xlnx.zynqmp_crf"
> > +
> > +#define XILINX_CRF(obj) \
> > +     OBJECT_CHECK(XlnxZynqMPCRF, (obj), TYPE_XLNX_ZYNQMP_CRF)
> 
> We prefer the OBJECT_DECLARE_SIMPLE_TYPE rather than directly
> defining a cast macro these days. (It also provides a typedef
> for you, among other things.)
> 
> Apart from that, and dropping minimum_version_id_old,
> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
>

Thanks Peter and Luc for review comments.
Sorry, things have been very busy around here, I'll try to get a new version posted next week addressing all comments I've seen so far.

Best regards,
Edgar 

[PATCH v2 4/6] hw/arm/xlnx-zynqmp: Connect the ZynqMP CRF

[Edgar E. Iglesias]

From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>

Connect the ZynqMP CRF - Clock Reset FPD device.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
---
 include/hw/arm/xlnx-zynqmp.h |  2 ++
 hw/arm/xlnx-zynqmp.c         | 16 ++++++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h
index 99ceb8a609..d5a3ad3df2 100644
--- a/include/hw/arm/xlnx-zynqmp.h
+++ b/include/hw/arm/xlnx-zynqmp.h
@@ -38,6 +38,7 @@
 #include "hw/dma/xlnx_csu_dma.h"
 #include "hw/nvram/xlnx-bbram.h"
 #include "hw/nvram/xlnx-zynqmp-efuse.h"
+#include "hw/misc/xlnx-zynqmp-crf.h"
 
 #define TYPE_XLNX_ZYNQMP "xlnx-zynqmp"
 OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP)
@@ -122,6 +123,7 @@ struct XlnxZynqMPState {
     XlnxZDMA gdma[XLNX_ZYNQMP_NUM_GDMA_CH];
     XlnxZDMA adma[XLNX_ZYNQMP_NUM_ADMA_CH];
     XlnxCSUDMA qspi_dma;
+    XlnxZynqMPCRF crf;
 
     char *boot_cpu;
     ARMCPU *boot_cpu_ptr;
diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
index 3dae51a786..9f433ee5d8 100644
--- a/hw/arm/xlnx-zynqmp.c
+++ b/hw/arm/xlnx-zynqmp.c
@@ -51,6 +51,9 @@
 #define QSPI_IRQ            15
 #define QSPI_DMA_ADDR       0xff0f0800
 
+#define CRF_ADDR            0xfd1a0000
+#define CRF_IRQ             120
+
 /* Serializer/Deserializer.  */
 #define SERDES_ADDR         0xfd400000
 #define SERDES_SIZE         0x20000
@@ -280,6 +283,18 @@ static void xlnx_zynqmp_create_efuse(XlnxZynqMPState *s, qemu_irq *gic)
     sysbus_connect_irq(sbd, 0, gic[EFUSE_IRQ]);
 }
 
+static void xlnx_zynqmp_create_crf(XlnxZynqMPState *s, qemu_irq *gic)
+{
+    SysBusDevice *sbd;
+
+    object_initialize_child(OBJECT(s), "crf", &s->crf, TYPE_XLNX_ZYNQMP_CRF);
+    sbd = SYS_BUS_DEVICE(&s->crf);
+
+    sysbus_realize(sbd, &error_fatal);
+    sysbus_mmio_map(sbd, 0, CRF_ADDR);
+    sysbus_connect_irq(sbd, 0, gic[CRF_IRQ]);
+}
+
 static void xlnx_zynqmp_create_unimp_mmio(XlnxZynqMPState *s)
 {
     static const struct UnimpInfo {
@@ -683,6 +698,7 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
 
     xlnx_zynqmp_create_bbram(s, gic_spi);
     xlnx_zynqmp_create_efuse(s, gic_spi);
+    xlnx_zynqmp_create_crf(s, gic_spi);
     xlnx_zynqmp_create_unimp_mmio(s);
 
     for (i = 0; i < XLNX_ZYNQMP_NUM_GDMA_CH; i++) {
-- 
2.25.1

[PATCH v2 5/6] hw/misc: Add a model of the Xilinx ZynqMP APU Control

[Edgar E. Iglesias]

From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>

Add a model of the Xilinx ZynqMP APU Control.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
---
 include/hw/misc/xlnx-zynqmp-apu-ctrl.h |  95 +++++++++
 hw/misc/xlnx-zynqmp-apu-ctrl.c         | 254 +++++++++++++++++++++++++
 hw/misc/meson.build                    |   1 +
 3 files changed, 350 insertions(+)
 create mode 100644 include/hw/misc/xlnx-zynqmp-apu-ctrl.h
 create mode 100644 hw/misc/xlnx-zynqmp-apu-ctrl.c

diff --git a/include/hw/misc/xlnx-zynqmp-apu-ctrl.h b/include/hw/misc/xlnx-zynqmp-apu-ctrl.h
new file mode 100644
index 0000000000..b0c0adb881
--- /dev/null
+++ b/include/hw/misc/xlnx-zynqmp-apu-ctrl.h
@@ -0,0 +1,95 @@
+/*
+ * QEMU model of ZynqMP APU Control.
+ *
+ * Copyright (c) 2013-2022 Xilinx Inc
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * Written by Peter Crosthwaite <peter.crosthwaite@xilinx.com> and
+ * Edgar E. Iglesias <edgar.iglesias@xilinx.com>
+ *
+ */
+#ifndef HW_MISC_XLNX_ZYNQMP_APU_CTRL_H
+#define HW_MISC_XLNX_ZYNQMP_APU_CTRL_H
+
+#include "hw/sysbus.h"
+#include "hw/register.h"
+#include "target/arm/cpu.h"
+
+#define TYPE_XLNX_ZYNQMP_APU_CTRL "xlnx.apu-ctrl"
+
+#define XLNX_ZYNQMP_APU(obj) \
+     OBJECT_CHECK(XlnxZynqMPAPUCtrl, (obj), TYPE_XLNX_ZYNQMP_APU_CTRL)
+
+REG32(APU_ERR_CTRL, 0x0)
+    FIELD(APU_ERR_CTRL, PSLVERR, 0, 1)
+REG32(ISR, 0x10)
+    FIELD(ISR, INV_APB, 0, 1)
+REG32(IMR, 0x14)
+    FIELD(IMR, INV_APB, 0, 1)
+REG32(IEN, 0x18)
+    FIELD(IEN, INV_APB, 0, 1)
+REG32(IDS, 0x1c)
+    FIELD(IDS, INV_APB, 0, 1)
+REG32(CONFIG_0, 0x20)
+    FIELD(CONFIG_0, CFGTE, 24, 4)
+    FIELD(CONFIG_0, CFGEND, 16, 4)
+    FIELD(CONFIG_0, VINITHI, 8, 4)
+    FIELD(CONFIG_0, AA64NAA32, 0, 4)
+REG32(CONFIG_1, 0x24)
+    FIELD(CONFIG_1, L2RSTDISABLE, 29, 1)
+    FIELD(CONFIG_1, L1RSTDISABLE, 28, 1)
+    FIELD(CONFIG_1, CP15DISABLE, 0, 4)
+REG32(RVBARADDR0L, 0x40)
+    FIELD(RVBARADDR0L, ADDR, 2, 30)
+REG32(RVBARADDR0H, 0x44)
+    FIELD(RVBARADDR0H, ADDR, 0, 8)
+REG32(RVBARADDR1L, 0x48)
+    FIELD(RVBARADDR1L, ADDR, 2, 30)
+REG32(RVBARADDR1H, 0x4c)
+    FIELD(RVBARADDR1H, ADDR, 0, 8)
+REG32(RVBARADDR2L, 0x50)
+    FIELD(RVBARADDR2L, ADDR, 2, 30)
+REG32(RVBARADDR2H, 0x54)
+    FIELD(RVBARADDR2H, ADDR, 0, 8)
+REG32(RVBARADDR3L, 0x58)
+    FIELD(RVBARADDR3L, ADDR, 2, 30)
+REG32(RVBARADDR3H, 0x5c)
+    FIELD(RVBARADDR3H, ADDR, 0, 8)
+REG32(ACE_CTRL, 0x60)
+    FIELD(ACE_CTRL, AWQOS, 16, 4)
+    FIELD(ACE_CTRL, ARQOS, 0, 4)
+REG32(SNOOP_CTRL, 0x80)
+    FIELD(SNOOP_CTRL, ACE_INACT, 4, 1)
+    FIELD(SNOOP_CTRL, ACP_INACT, 0, 1)
+REG32(PWRCTL, 0x90)
+    FIELD(PWRCTL, CLREXMONREQ, 17, 1)
+    FIELD(PWRCTL, L2FLUSHREQ, 16, 1)
+    FIELD(PWRCTL, CPUPWRDWNREQ, 0, 4)
+REG32(PWRSTAT, 0x94)
+    FIELD(PWRSTAT, CLREXMONACK, 17, 1)
+    FIELD(PWRSTAT, L2FLUSHDONE, 16, 1)
+    FIELD(PWRSTAT, DBGNOPWRDWN, 0, 4)
+
+#define APU_R_MAX ((R_PWRSTAT) + 1)
+
+#define APU_MAX_CPU    4
+
+typedef struct XlnxZynqMPAPUCtrl {
+    SysBusDevice busdev;
+
+    ARMCPU *cpus[APU_MAX_CPU];
+    /* WFIs towards PMU. */
+    qemu_irq wfi_out[4];
+    /* CPU Power status towards INTC Redirect. */
+    qemu_irq cpu_power_status[4];
+    qemu_irq irq_imr;
+
+    uint8_t cpu_pwrdwn_req;
+    uint8_t cpu_in_wfi;
+
+    RegisterInfoArray *reg_array;
+    uint32_t regs[APU_R_MAX];
+    RegisterInfo regs_info[APU_R_MAX];
+} XlnxZynqMPAPUCtrl;
+
+#endif
diff --git a/hw/misc/xlnx-zynqmp-apu-ctrl.c b/hw/misc/xlnx-zynqmp-apu-ctrl.c
new file mode 100644
index 0000000000..ea9032e0ed
--- /dev/null
+++ b/hw/misc/xlnx-zynqmp-apu-ctrl.c
@@ -0,0 +1,254 @@
+/*
+ * QEMU model of the ZynqMP APU Control.
+ *
+ * Copyright (c) 2013-2022 Xilinx Inc
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * Written by Peter Crosthwaite <peter.crosthwaite@xilinx.com> and
+ * Edgar E. Iglesias <edgar.iglesias@xilinx.com>
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu/log.h"
+#include "migration/vmstate.h"
+#include "hw/qdev-properties.h"
+#include "hw/sysbus.h"
+#include "hw/irq.h"
+#include "hw/register.h"
+
+#include "qemu/bitops.h"
+#include "qapi/qmp/qerror.h"
+
+#include "hw/misc/xlnx-zynqmp-apu-ctrl.h"
+
+#ifndef XILINX_ZYNQMP_APU_ERR_DEBUG
+#define XILINX_ZYNQMP_APU_ERR_DEBUG 1
+#endif
+
+static void update_wfi_out(void *opaque)
+{
+    XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU(opaque);
+    unsigned int i, wfi_pending;
+
+    wfi_pending = s->cpu_pwrdwn_req & s->cpu_in_wfi;
+    for (i = 0; i < APU_MAX_CPU; i++) {
+        qemu_set_irq(s->wfi_out[i], !!(wfi_pending & (1 << i)));
+    }
+}
+
+static void zynqmp_apu_rvbar_post_write(RegisterInfo *reg, uint64_t val)
+{
+    XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU(reg->opaque);
+    int i;
+
+    for (i = 0; i < APU_MAX_CPU; ++i) {
+        uint64_t rvbar = s->regs[R_RVBARADDR0L + 2 * i] +
+                         ((uint64_t)s->regs[R_RVBARADDR0H + 2 * i] << 32);
+        if (s->cpus[i]) {
+            object_property_set_int(OBJECT(s->cpus[i]), "rvbar", rvbar,
+                                    &error_abort);
+        }
+    }
+}
+
+static void zynqmp_apu_pwrctl_post_write(RegisterInfo *reg, uint64_t val)
+{
+    XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU(reg->opaque);
+    unsigned int i, new;
+
+    for (i = 0; i < APU_MAX_CPU; i++) {
+        new = val & (1 << i);
+        /* Check if CPU's CPUPWRDNREQ has changed. If yes, update GPIOs. */
+        if (new != (s->cpu_pwrdwn_req & (1 << i))) {
+            qemu_set_irq(s->cpu_power_status[i], !!new);
+        }
+        s->cpu_pwrdwn_req &= ~(1 << i);
+        s->cpu_pwrdwn_req |= new;
+    }
+    update_wfi_out(s);
+}
+
+static void imr_update_irq(XlnxZynqMPAPUCtrl *s)
+{
+    bool pending = s->regs[R_ISR] & ~s->regs[R_IMR];
+    qemu_set_irq(s->irq_imr, pending);
+}
+
+static void isr_postw(RegisterInfo *reg, uint64_t val64)
+{
+    XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU(reg->opaque);
+    imr_update_irq(s);
+}
+
+static uint64_t ien_prew(RegisterInfo *reg, uint64_t val64)
+{
+    XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU(reg->opaque);
+    uint32_t val = val64;
+
+    s->regs[R_IMR] &= ~val;
+    imr_update_irq(s);
+    return 0;
+}
+
+static uint64_t ids_prew(RegisterInfo *reg, uint64_t val64)
+{
+    XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU(reg->opaque);
+    uint32_t val = val64;
+
+    s->regs[R_IMR] |= val;
+    imr_update_irq(s);
+    return 0;
+}
+
+static const RegisterAccessInfo zynqmp_apu_regs_info[] = {
+#define RVBAR_REGDEF(n) \
+    {   .name = "RVBAR CPU " #n " Low",  .addr = A_RVBARADDR ## n ## L,    \
+            .reset = 0xffff0000ul,                                         \
+            .post_write = zynqmp_apu_rvbar_post_write,                     \
+    },{ .name = "RVBAR CPU " #n " High", .addr = A_RVBARADDR ## n ## H,    \
+            .post_write = zynqmp_apu_rvbar_post_write,                     \
+    }
+    {   .name = "ERR_CTRL",  .addr = A_APU_ERR_CTRL,
+    },{ .name = "ISR",  .addr = A_ISR,
+        .w1c = 0x1,
+        .post_write = isr_postw,
+    },{ .name = "IMR",  .addr = A_IMR,
+        .reset = 0x1,
+        .ro = 0x1,
+    },{ .name = "IEN",  .addr = A_IEN,
+        .pre_write = ien_prew,
+    },{ .name = "IDS",  .addr = A_IDS,
+        .pre_write = ids_prew,
+    },{ .name = "CONFIG_0",  .addr = A_CONFIG_0,
+        .reset = 0xf0f,
+    },{ .name = "CONFIG_1",  .addr = A_CONFIG_1,
+    },
+    RVBAR_REGDEF(0),
+    RVBAR_REGDEF(1),
+    RVBAR_REGDEF(2),
+    RVBAR_REGDEF(3),
+    { .name = "ACE_CTRL",  .addr = A_ACE_CTRL,
+        .reset = 0xf000f,
+    },{ .name = "SNOOP_CTRL",  .addr = A_SNOOP_CTRL,
+    },{ .name = "PWRCTL",  .addr = A_PWRCTL,
+        .post_write = zynqmp_apu_pwrctl_post_write,
+    },{ .name = "PWRSTAT",  .addr = A_PWRSTAT,
+        .ro = 0x3000f,
+    }
+};
+
+static void zynqmp_apu_reset_enter(Object *obj, ResetType type)
+{
+    XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU(obj);
+    int i;
+
+    for (i = 0; i < APU_R_MAX; ++i) {
+        register_reset(&s->regs_info[i]);
+    }
+
+    s->cpu_pwrdwn_req = 0;
+    s->cpu_in_wfi = 0;
+}
+
+static void zynqmp_apu_reset_hold(Object *obj)
+{
+    XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU(obj);
+
+    update_wfi_out(s);
+    imr_update_irq(s);
+}
+
+static const MemoryRegionOps zynqmp_apu_ops = {
+    .read = register_read_memory,
+    .write = register_write_memory,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+    }
+};
+
+static void zynqmp_apu_handle_wfi(void *opaque, int irq, int level)
+{
+    XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU(opaque);
+
+    s->cpu_in_wfi = deposit32(s->cpu_in_wfi, irq, 1, level);
+    update_wfi_out(s);
+}
+
+static void zynqmp_apu_init(Object *obj)
+{
+    XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU(obj);
+    int i;
+
+    s->reg_array =
+        register_init_block32(DEVICE(obj), zynqmp_apu_regs_info,
+                              ARRAY_SIZE(zynqmp_apu_regs_info),
+                              s->regs_info, s->regs,
+                              &zynqmp_apu_ops,
+                              XILINX_ZYNQMP_APU_ERR_DEBUG,
+                              APU_R_MAX * 4);
+    sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->reg_array->mem);
+    sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq_imr);
+
+    for (i = 0; i < APU_MAX_CPU; ++i) {
+        g_autofree gchar *prop_name = g_strdup_printf("cpu%d", i);
+        object_property_add_link(obj, prop_name, TYPE_ARM_CPU,
+                                 (Object **)&s->cpus[i],
+                                 qdev_prop_allow_set_link_before_realize,
+                                 OBJ_PROP_LINK_STRONG);
+    }
+
+    /* wfi_out is used to connect to PMU GPIs. */
+    qdev_init_gpio_out_named(DEVICE(obj), s->wfi_out, "wfi_out", 4);
+    /* CPU_POWER_STATUS is used to connect to INTC redirect. */
+    qdev_init_gpio_out_named(DEVICE(obj), s->cpu_power_status,
+                             "CPU_POWER_STATUS", 4);
+    /* wfi_in is used as input from CPUs as wfi request. */
+    qdev_init_gpio_in_named(DEVICE(obj), zynqmp_apu_handle_wfi, "wfi_in", 4);
+}
+
+static void zynqmp_apu_finalize(Object *obj)
+{
+    XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU(obj);
+    register_finalize_block(s->reg_array);
+}
+
+static const VMStateDescription vmstate_zynqmp_apu = {
+    .name = TYPE_XLNX_ZYNQMP_APU_CTRL,
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .minimum_version_id_old = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32_ARRAY(regs, XlnxZynqMPAPUCtrl, APU_R_MAX),
+        VMSTATE_END_OF_LIST(),
+    }
+};
+
+static void zynqmp_apu_class_init(ObjectClass *klass, void *data)
+{
+    ResettableClass *rc = RESETTABLE_CLASS(klass);
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->vmsd = &vmstate_zynqmp_apu;
+
+    rc->phases.enter = zynqmp_apu_reset_enter;
+    rc->phases.hold = zynqmp_apu_reset_hold;
+}
+
+static const TypeInfo zynqmp_apu_info = {
+    .name              = TYPE_XLNX_ZYNQMP_APU_CTRL,
+    .parent            = TYPE_SYS_BUS_DEVICE,
+    .instance_size     = sizeof(XlnxZynqMPAPUCtrl),
+    .class_init        = zynqmp_apu_class_init,
+    .instance_init     = zynqmp_apu_init,
+    .instance_finalize = zynqmp_apu_finalize,
+};
+
+static void zynqmp_apu_register_types(void)
+{
+    type_register_static(&zynqmp_apu_info);
+}
+
+type_init(zynqmp_apu_register_types)
diff --git a/hw/misc/meson.build b/hw/misc/meson.build
index 1927f13a5e..cf9d4cc618 100644
--- a/hw/misc/meson.build
+++ b/hw/misc/meson.build
@@ -85,6 +85,7 @@ softmmu_ss.add(when: 'CONFIG_RASPI', if_true: files(
 softmmu_ss.add(when: 'CONFIG_SLAVIO', if_true: files('slavio_misc.c'))
 softmmu_ss.add(when: 'CONFIG_ZYNQ', if_true: files('zynq_slcr.c'))
 specific_ss.add(when: 'CONFIG_XLNX_ZYNQMP_ARM', if_true: files('xlnx-zynqmp-crf.c'))
+specific_ss.add(when: 'CONFIG_XLNX_ZYNQMP_ARM', if_true: files('xlnx-zynqmp-apu-ctrl.c'))
 softmmu_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files(
   'xlnx-versal-xramc.c',
   'xlnx-versal-pmc-iou-slcr.c',
-- 
2.25.1

Re: [PATCH v2 5/6] hw/misc: Add a model of the Xilinx ZynqMP APU Control

[Luc Michel]

On 15:01 Thu 03 Feb     , Edgar E. Iglesias wrote:
> From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>
> 
> Add a model of the Xilinx ZynqMP APU Control.
> 
> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>

Reviewed-by: Luc Michel <luc@lmichel.fr>

> ---
>  include/hw/misc/xlnx-zynqmp-apu-ctrl.h |  95 +++++++++
>  hw/misc/xlnx-zynqmp-apu-ctrl.c         | 254 +++++++++++++++++++++++++
>  hw/misc/meson.build                    |   1 +
>  3 files changed, 350 insertions(+)
>  create mode 100644 include/hw/misc/xlnx-zynqmp-apu-ctrl.h
>  create mode 100644 hw/misc/xlnx-zynqmp-apu-ctrl.c
> 
> diff --git a/include/hw/misc/xlnx-zynqmp-apu-ctrl.h b/include/hw/misc/xlnx-zynqmp-apu-ctrl.h
> new file mode 100644
> index 0000000000..b0c0adb881
> --- /dev/null
> +++ b/include/hw/misc/xlnx-zynqmp-apu-ctrl.h
> @@ -0,0 +1,95 @@
> +/*
> + * QEMU model of ZynqMP APU Control.
> + *
> + * Copyright (c) 2013-2022 Xilinx Inc
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + *
> + * Written by Peter Crosthwaite <peter.crosthwaite@xilinx.com> and
> + * Edgar E. Iglesias <edgar.iglesias@xilinx.com>
> + *
> + */
> +#ifndef HW_MISC_XLNX_ZYNQMP_APU_CTRL_H
> +#define HW_MISC_XLNX_ZYNQMP_APU_CTRL_H
> +
> +#include "hw/sysbus.h"
> +#include "hw/register.h"
> +#include "target/arm/cpu.h"
> +
> +#define TYPE_XLNX_ZYNQMP_APU_CTRL "xlnx.apu-ctrl"
> +
> +#define XLNX_ZYNQMP_APU(obj) \
> +     OBJECT_CHECK(XlnxZynqMPAPUCtrl, (obj), TYPE_XLNX_ZYNQMP_APU_CTRL)
> +
> +REG32(APU_ERR_CTRL, 0x0)
> +    FIELD(APU_ERR_CTRL, PSLVERR, 0, 1)
> +REG32(ISR, 0x10)
> +    FIELD(ISR, INV_APB, 0, 1)
> +REG32(IMR, 0x14)
> +    FIELD(IMR, INV_APB, 0, 1)
> +REG32(IEN, 0x18)
> +    FIELD(IEN, INV_APB, 0, 1)
> +REG32(IDS, 0x1c)
> +    FIELD(IDS, INV_APB, 0, 1)
> +REG32(CONFIG_0, 0x20)
> +    FIELD(CONFIG_0, CFGTE, 24, 4)
> +    FIELD(CONFIG_0, CFGEND, 16, 4)
> +    FIELD(CONFIG_0, VINITHI, 8, 4)
> +    FIELD(CONFIG_0, AA64NAA32, 0, 4)
> +REG32(CONFIG_1, 0x24)
> +    FIELD(CONFIG_1, L2RSTDISABLE, 29, 1)
> +    FIELD(CONFIG_1, L1RSTDISABLE, 28, 1)
> +    FIELD(CONFIG_1, CP15DISABLE, 0, 4)
> +REG32(RVBARADDR0L, 0x40)
> +    FIELD(RVBARADDR0L, ADDR, 2, 30)
> +REG32(RVBARADDR0H, 0x44)
> +    FIELD(RVBARADDR0H, ADDR, 0, 8)
> +REG32(RVBARADDR1L, 0x48)
> +    FIELD(RVBARADDR1L, ADDR, 2, 30)
> +REG32(RVBARADDR1H, 0x4c)
> +    FIELD(RVBARADDR1H, ADDR, 0, 8)
> +REG32(RVBARADDR2L, 0x50)
> +    FIELD(RVBARADDR2L, ADDR, 2, 30)
> +REG32(RVBARADDR2H, 0x54)
> +    FIELD(RVBARADDR2H, ADDR, 0, 8)
> +REG32(RVBARADDR3L, 0x58)
> +    FIELD(RVBARADDR3L, ADDR, 2, 30)
> +REG32(RVBARADDR3H, 0x5c)
> +    FIELD(RVBARADDR3H, ADDR, 0, 8)
> +REG32(ACE_CTRL, 0x60)
> +    FIELD(ACE_CTRL, AWQOS, 16, 4)
> +    FIELD(ACE_CTRL, ARQOS, 0, 4)
> +REG32(SNOOP_CTRL, 0x80)
> +    FIELD(SNOOP_CTRL, ACE_INACT, 4, 1)
> +    FIELD(SNOOP_CTRL, ACP_INACT, 0, 1)
> +REG32(PWRCTL, 0x90)
> +    FIELD(PWRCTL, CLREXMONREQ, 17, 1)
> +    FIELD(PWRCTL, L2FLUSHREQ, 16, 1)
> +    FIELD(PWRCTL, CPUPWRDWNREQ, 0, 4)
> +REG32(PWRSTAT, 0x94)
> +    FIELD(PWRSTAT, CLREXMONACK, 17, 1)
> +    FIELD(PWRSTAT, L2FLUSHDONE, 16, 1)
> +    FIELD(PWRSTAT, DBGNOPWRDWN, 0, 4)
> +
> +#define APU_R_MAX ((R_PWRSTAT) + 1)
> +
> +#define APU_MAX_CPU    4
> +
> +typedef struct XlnxZynqMPAPUCtrl {
> +    SysBusDevice busdev;
> +
> +    ARMCPU *cpus[APU_MAX_CPU];
> +    /* WFIs towards PMU. */
> +    qemu_irq wfi_out[4];
> +    /* CPU Power status towards INTC Redirect. */
> +    qemu_irq cpu_power_status[4];
> +    qemu_irq irq_imr;
> +
> +    uint8_t cpu_pwrdwn_req;
> +    uint8_t cpu_in_wfi;
> +
> +    RegisterInfoArray *reg_array;
> +    uint32_t regs[APU_R_MAX];
> +    RegisterInfo regs_info[APU_R_MAX];
> +} XlnxZynqMPAPUCtrl;
> +
> +#endif
> diff --git a/hw/misc/xlnx-zynqmp-apu-ctrl.c b/hw/misc/xlnx-zynqmp-apu-ctrl.c
> new file mode 100644
> index 0000000000..ea9032e0ed
> --- /dev/null
> +++ b/hw/misc/xlnx-zynqmp-apu-ctrl.c
> @@ -0,0 +1,254 @@
> +/*
> + * QEMU model of the ZynqMP APU Control.
> + *
> + * Copyright (c) 2013-2022 Xilinx Inc
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + *
> + * Written by Peter Crosthwaite <peter.crosthwaite@xilinx.com> and
> + * Edgar E. Iglesias <edgar.iglesias@xilinx.com>
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qapi/error.h"
> +#include "qemu/log.h"
> +#include "migration/vmstate.h"
> +#include "hw/qdev-properties.h"
> +#include "hw/sysbus.h"
> +#include "hw/irq.h"
> +#include "hw/register.h"
> +
> +#include "qemu/bitops.h"
> +#include "qapi/qmp/qerror.h"
> +
> +#include "hw/misc/xlnx-zynqmp-apu-ctrl.h"
> +
> +#ifndef XILINX_ZYNQMP_APU_ERR_DEBUG
> +#define XILINX_ZYNQMP_APU_ERR_DEBUG 1
> +#endif
> +
> +static void update_wfi_out(void *opaque)
> +{
> +    XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU(opaque);
> +    unsigned int i, wfi_pending;
> +
> +    wfi_pending = s->cpu_pwrdwn_req & s->cpu_in_wfi;
> +    for (i = 0; i < APU_MAX_CPU; i++) {
> +        qemu_set_irq(s->wfi_out[i], !!(wfi_pending & (1 << i)));
> +    }
> +}
> +
> +static void zynqmp_apu_rvbar_post_write(RegisterInfo *reg, uint64_t val)
> +{
> +    XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU(reg->opaque);
> +    int i;
> +
> +    for (i = 0; i < APU_MAX_CPU; ++i) {
> +        uint64_t rvbar = s->regs[R_RVBARADDR0L + 2 * i] +
> +                         ((uint64_t)s->regs[R_RVBARADDR0H + 2 * i] << 32);
> +        if (s->cpus[i]) {
> +            object_property_set_int(OBJECT(s->cpus[i]), "rvbar", rvbar,
> +                                    &error_abort);
> +        }
> +    }
> +}
> +
> +static void zynqmp_apu_pwrctl_post_write(RegisterInfo *reg, uint64_t val)
> +{
> +    XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU(reg->opaque);
> +    unsigned int i, new;
> +
> +    for (i = 0; i < APU_MAX_CPU; i++) {
> +        new = val & (1 << i);
> +        /* Check if CPU's CPUPWRDNREQ has changed. If yes, update GPIOs. */
> +        if (new != (s->cpu_pwrdwn_req & (1 << i))) {
> +            qemu_set_irq(s->cpu_power_status[i], !!new);
> +        }
> +        s->cpu_pwrdwn_req &= ~(1 << i);
> +        s->cpu_pwrdwn_req |= new;
> +    }
> +    update_wfi_out(s);
> +}
> +
> +static void imr_update_irq(XlnxZynqMPAPUCtrl *s)
> +{
> +    bool pending = s->regs[R_ISR] & ~s->regs[R_IMR];
> +    qemu_set_irq(s->irq_imr, pending);
> +}
> +
> +static void isr_postw(RegisterInfo *reg, uint64_t val64)
> +{
> +    XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU(reg->opaque);
> +    imr_update_irq(s);
> +}
> +
> +static uint64_t ien_prew(RegisterInfo *reg, uint64_t val64)
> +{
> +    XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU(reg->opaque);
> +    uint32_t val = val64;
> +
> +    s->regs[R_IMR] &= ~val;
> +    imr_update_irq(s);
> +    return 0;
> +}
> +
> +static uint64_t ids_prew(RegisterInfo *reg, uint64_t val64)
> +{
> +    XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU(reg->opaque);
> +    uint32_t val = val64;
> +
> +    s->regs[R_IMR] |= val;
> +    imr_update_irq(s);
> +    return 0;
> +}
> +
> +static const RegisterAccessInfo zynqmp_apu_regs_info[] = {
> +#define RVBAR_REGDEF(n) \
> +    {   .name = "RVBAR CPU " #n " Low",  .addr = A_RVBARADDR ## n ## L,    \
> +            .reset = 0xffff0000ul,                                         \
> +            .post_write = zynqmp_apu_rvbar_post_write,                     \
> +    },{ .name = "RVBAR CPU " #n " High", .addr = A_RVBARADDR ## n ## H,    \
> +            .post_write = zynqmp_apu_rvbar_post_write,                     \
> +    }
> +    {   .name = "ERR_CTRL",  .addr = A_APU_ERR_CTRL,
> +    },{ .name = "ISR",  .addr = A_ISR,
> +        .w1c = 0x1,
> +        .post_write = isr_postw,
> +    },{ .name = "IMR",  .addr = A_IMR,
> +        .reset = 0x1,
> +        .ro = 0x1,
> +    },{ .name = "IEN",  .addr = A_IEN,
> +        .pre_write = ien_prew,
> +    },{ .name = "IDS",  .addr = A_IDS,
> +        .pre_write = ids_prew,
> +    },{ .name = "CONFIG_0",  .addr = A_CONFIG_0,
> +        .reset = 0xf0f,
> +    },{ .name = "CONFIG_1",  .addr = A_CONFIG_1,
> +    },
> +    RVBAR_REGDEF(0),
> +    RVBAR_REGDEF(1),
> +    RVBAR_REGDEF(2),
> +    RVBAR_REGDEF(3),
> +    { .name = "ACE_CTRL",  .addr = A_ACE_CTRL,
> +        .reset = 0xf000f,
> +    },{ .name = "SNOOP_CTRL",  .addr = A_SNOOP_CTRL,
> +    },{ .name = "PWRCTL",  .addr = A_PWRCTL,
> +        .post_write = zynqmp_apu_pwrctl_post_write,
> +    },{ .name = "PWRSTAT",  .addr = A_PWRSTAT,
> +        .ro = 0x3000f,
> +    }
> +};
> +
> +static void zynqmp_apu_reset_enter(Object *obj, ResetType type)
> +{
> +    XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU(obj);
> +    int i;
> +
> +    for (i = 0; i < APU_R_MAX; ++i) {
> +        register_reset(&s->regs_info[i]);
> +    }
> +
> +    s->cpu_pwrdwn_req = 0;
> +    s->cpu_in_wfi = 0;
> +}
> +
> +static void zynqmp_apu_reset_hold(Object *obj)
> +{
> +    XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU(obj);
> +
> +    update_wfi_out(s);
> +    imr_update_irq(s);
> +}
> +
> +static const MemoryRegionOps zynqmp_apu_ops = {
> +    .read = register_read_memory,
> +    .write = register_write_memory,
> +    .endianness = DEVICE_LITTLE_ENDIAN,
> +    .valid = {
> +        .min_access_size = 4,
> +        .max_access_size = 4,
> +    }
> +};
> +
> +static void zynqmp_apu_handle_wfi(void *opaque, int irq, int level)
> +{
> +    XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU(opaque);
> +
> +    s->cpu_in_wfi = deposit32(s->cpu_in_wfi, irq, 1, level);
> +    update_wfi_out(s);
> +}
> +
> +static void zynqmp_apu_init(Object *obj)
> +{
> +    XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU(obj);
> +    int i;
> +
> +    s->reg_array =
> +        register_init_block32(DEVICE(obj), zynqmp_apu_regs_info,
> +                              ARRAY_SIZE(zynqmp_apu_regs_info),
> +                              s->regs_info, s->regs,
> +                              &zynqmp_apu_ops,
> +                              XILINX_ZYNQMP_APU_ERR_DEBUG,
> +                              APU_R_MAX * 4);
> +    sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->reg_array->mem);
> +    sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq_imr);
> +
> +    for (i = 0; i < APU_MAX_CPU; ++i) {
> +        g_autofree gchar *prop_name = g_strdup_printf("cpu%d", i);
> +        object_property_add_link(obj, prop_name, TYPE_ARM_CPU,
> +                                 (Object **)&s->cpus[i],
> +                                 qdev_prop_allow_set_link_before_realize,
> +                                 OBJ_PROP_LINK_STRONG);
> +    }
> +
> +    /* wfi_out is used to connect to PMU GPIs. */
> +    qdev_init_gpio_out_named(DEVICE(obj), s->wfi_out, "wfi_out", 4);
> +    /* CPU_POWER_STATUS is used to connect to INTC redirect. */
> +    qdev_init_gpio_out_named(DEVICE(obj), s->cpu_power_status,
> +                             "CPU_POWER_STATUS", 4);
> +    /* wfi_in is used as input from CPUs as wfi request. */
> +    qdev_init_gpio_in_named(DEVICE(obj), zynqmp_apu_handle_wfi, "wfi_in", 4);
> +}
> +
> +static void zynqmp_apu_finalize(Object *obj)
> +{
> +    XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU(obj);
> +    register_finalize_block(s->reg_array);
> +}
> +
> +static const VMStateDescription vmstate_zynqmp_apu = {
> +    .name = TYPE_XLNX_ZYNQMP_APU_CTRL,
> +    .version_id = 1,
> +    .minimum_version_id = 1,
> +    .minimum_version_id_old = 1,
> +    .fields = (VMStateField[]) {
> +        VMSTATE_UINT32_ARRAY(regs, XlnxZynqMPAPUCtrl, APU_R_MAX),
> +        VMSTATE_END_OF_LIST(),
> +    }
> +};
> +
> +static void zynqmp_apu_class_init(ObjectClass *klass, void *data)
> +{
> +    ResettableClass *rc = RESETTABLE_CLASS(klass);
> +    DeviceClass *dc = DEVICE_CLASS(klass);
> +
> +    dc->vmsd = &vmstate_zynqmp_apu;
> +
> +    rc->phases.enter = zynqmp_apu_reset_enter;
> +    rc->phases.hold = zynqmp_apu_reset_hold;
> +}
> +
> +static const TypeInfo zynqmp_apu_info = {
> +    .name              = TYPE_XLNX_ZYNQMP_APU_CTRL,
> +    .parent            = TYPE_SYS_BUS_DEVICE,
> +    .instance_size     = sizeof(XlnxZynqMPAPUCtrl),
> +    .class_init        = zynqmp_apu_class_init,
> +    .instance_init     = zynqmp_apu_init,
> +    .instance_finalize = zynqmp_apu_finalize,
> +};
> +
> +static void zynqmp_apu_register_types(void)
> +{
> +    type_register_static(&zynqmp_apu_info);
> +}
> +
> +type_init(zynqmp_apu_register_types)
> diff --git a/hw/misc/meson.build b/hw/misc/meson.build
> index 1927f13a5e..cf9d4cc618 100644
> --- a/hw/misc/meson.build
> +++ b/hw/misc/meson.build
> @@ -85,6 +85,7 @@ softmmu_ss.add(when: 'CONFIG_RASPI', if_true: files(
>  softmmu_ss.add(when: 'CONFIG_SLAVIO', if_true: files('slavio_misc.c'))
>  softmmu_ss.add(when: 'CONFIG_ZYNQ', if_true: files('zynq_slcr.c'))
>  specific_ss.add(when: 'CONFIG_XLNX_ZYNQMP_ARM', if_true: files('xlnx-zynqmp-crf.c'))
> +specific_ss.add(when: 'CONFIG_XLNX_ZYNQMP_ARM', if_true: files('xlnx-zynqmp-apu-ctrl.c'))
>  softmmu_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files(
>    'xlnx-versal-xramc.c',
>    'xlnx-versal-pmc-iou-slcr.c',
> -- 
> 2.25.1
> 

-- 

[PATCH v2 6/6] hw/arm/xlnx-zynqmp: Connect the ZynqMP APU Control

[Edgar E. Iglesias]

From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>

Connect the ZynqMP APU Control device.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
---
 include/hw/arm/xlnx-zynqmp.h |  4 +++-
 hw/arm/xlnx-zynqmp.c         | 25 +++++++++++++++++++++++--
 2 files changed, 26 insertions(+), 3 deletions(-)

diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h
index d5a3ad3df2..05cd2128f3 100644
--- a/include/hw/arm/xlnx-zynqmp.h
+++ b/include/hw/arm/xlnx-zynqmp.h
@@ -38,6 +38,7 @@
 #include "hw/dma/xlnx_csu_dma.h"
 #include "hw/nvram/xlnx-bbram.h"
 #include "hw/nvram/xlnx-zynqmp-efuse.h"
+#include "hw/misc/xlnx-zynqmp-apu-ctrl.h"
 #include "hw/misc/xlnx-zynqmp-crf.h"
 
 #define TYPE_XLNX_ZYNQMP "xlnx-zynqmp"
@@ -85,7 +86,7 @@ OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP)
 /*
  * Unimplemented mmio regions needed to boot some images.
  */
-#define XLNX_ZYNQMP_NUM_UNIMP_AREAS 2
+#define XLNX_ZYNQMP_NUM_UNIMP_AREAS 1
 
 struct XlnxZynqMPState {
     /*< private >*/
@@ -123,6 +124,7 @@ struct XlnxZynqMPState {
     XlnxZDMA gdma[XLNX_ZYNQMP_NUM_GDMA_CH];
     XlnxZDMA adma[XLNX_ZYNQMP_NUM_ADMA_CH];
     XlnxCSUDMA qspi_dma;
+    XlnxZynqMPAPUCtrl apu_ctrl;
     XlnxZynqMPCRF crf;
 
     char *boot_cpu;
diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
index 9f433ee5d8..2fa8c77dfd 100644
--- a/hw/arm/xlnx-zynqmp.c
+++ b/hw/arm/xlnx-zynqmp.c
@@ -65,7 +65,7 @@
 #define DPDMA_IRQ           116
 
 #define APU_ADDR            0xfd5c0000
-#define APU_SIZE            0x100
+#define APU_IRQ             153
 
 #define IPI_ADDR            0xFF300000
 #define IPI_IRQ             64
@@ -283,6 +283,27 @@ static void xlnx_zynqmp_create_efuse(XlnxZynqMPState *s, qemu_irq *gic)
     sysbus_connect_irq(sbd, 0, gic[EFUSE_IRQ]);
 }
 
+static void xlnx_zynqmp_create_apu_ctrl(XlnxZynqMPState *s, qemu_irq *gic)
+{
+    SysBusDevice *sbd;
+    int i;
+
+    object_initialize_child(OBJECT(s), "apu-ctrl", &s->apu_ctrl,
+                            TYPE_XLNX_ZYNQMP_APU_CTRL);
+    sbd = SYS_BUS_DEVICE(&s->apu_ctrl);
+
+    for (i = 0; i < XLNX_ZYNQMP_NUM_APU_CPUS; i++) {
+        g_autofree gchar *name = g_strdup_printf("cpu%d", i);
+
+        object_property_set_link(OBJECT(&s->apu_ctrl), name,
+                                 OBJECT(&s->apu_cpu[i]), &error_abort);
+    }
+
+    sysbus_realize(sbd, &error_fatal);
+    sysbus_mmio_map(sbd, 0, APU_ADDR);
+    sysbus_connect_irq(sbd, 0, gic[APU_IRQ]);
+}
+
 static void xlnx_zynqmp_create_crf(XlnxZynqMPState *s, qemu_irq *gic)
 {
     SysBusDevice *sbd;
@@ -302,7 +323,6 @@ static void xlnx_zynqmp_create_unimp_mmio(XlnxZynqMPState *s)
         hwaddr base;
         hwaddr size;
     } unimp_areas[ARRAY_SIZE(s->mr_unimp)] = {
-        { .name = "apu", APU_ADDR, APU_SIZE },
         { .name = "serdes", SERDES_ADDR, SERDES_SIZE },
     };
     unsigned int nr;
@@ -698,6 +718,7 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
 
     xlnx_zynqmp_create_bbram(s, gic_spi);
     xlnx_zynqmp_create_efuse(s, gic_spi);
+    xlnx_zynqmp_create_apu_ctrl(s, gic_spi);
     xlnx_zynqmp_create_crf(s, gic_spi);
     xlnx_zynqmp_create_unimp_mmio(s);
 
-- 
2.25.1

Re: [PATCH v2 6/6] hw/arm/xlnx-zynqmp: Connect the ZynqMP APU Control

[Luc Michel]

Hi Edgar,

On 15:01 Thu 03 Feb     , Edgar E. Iglesias wrote:
> From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>
> 
> Connect the ZynqMP APU Control device.

Somehow you don't seem to connect the "wfi_in" pins. I guess it's
because currently QEMU ARM CPUs do not expose a "wfi_out" pin right?

Reviewed-by: Luc Michel <luc@lmichel.fr>

> 
> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
> ---
>  include/hw/arm/xlnx-zynqmp.h |  4 +++-
>  hw/arm/xlnx-zynqmp.c         | 25 +++++++++++++++++++++++--
>  2 files changed, 26 insertions(+), 3 deletions(-)
> 
> diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h
> index d5a3ad3df2..05cd2128f3 100644
> --- a/include/hw/arm/xlnx-zynqmp.h
> +++ b/include/hw/arm/xlnx-zynqmp.h
> @@ -38,6 +38,7 @@
>  #include "hw/dma/xlnx_csu_dma.h"
>  #include "hw/nvram/xlnx-bbram.h"
>  #include "hw/nvram/xlnx-zynqmp-efuse.h"
> +#include "hw/misc/xlnx-zynqmp-apu-ctrl.h"
>  #include "hw/misc/xlnx-zynqmp-crf.h"
>  
>  #define TYPE_XLNX_ZYNQMP "xlnx-zynqmp"
> @@ -85,7 +86,7 @@ OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP)
>  /*
>   * Unimplemented mmio regions needed to boot some images.
>   */
> -#define XLNX_ZYNQMP_NUM_UNIMP_AREAS 2
> +#define XLNX_ZYNQMP_NUM_UNIMP_AREAS 1
>  
>  struct XlnxZynqMPState {
>      /*< private >*/
> @@ -123,6 +124,7 @@ struct XlnxZynqMPState {
>      XlnxZDMA gdma[XLNX_ZYNQMP_NUM_GDMA_CH];
>      XlnxZDMA adma[XLNX_ZYNQMP_NUM_ADMA_CH];
>      XlnxCSUDMA qspi_dma;
> +    XlnxZynqMPAPUCtrl apu_ctrl;
>      XlnxZynqMPCRF crf;
>  
>      char *boot_cpu;
> diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
> index 9f433ee5d8..2fa8c77dfd 100644
> --- a/hw/arm/xlnx-zynqmp.c
> +++ b/hw/arm/xlnx-zynqmp.c
> @@ -65,7 +65,7 @@
>  #define DPDMA_IRQ           116
>  
>  #define APU_ADDR            0xfd5c0000
> -#define APU_SIZE            0x100
> +#define APU_IRQ             153
>  
>  #define IPI_ADDR            0xFF300000
>  #define IPI_IRQ             64
> @@ -283,6 +283,27 @@ static void xlnx_zynqmp_create_efuse(XlnxZynqMPState *s, qemu_irq *gic)
>      sysbus_connect_irq(sbd, 0, gic[EFUSE_IRQ]);
>  }
>  
> +static void xlnx_zynqmp_create_apu_ctrl(XlnxZynqMPState *s, qemu_irq *gic)
> +{
> +    SysBusDevice *sbd;
> +    int i;
> +
> +    object_initialize_child(OBJECT(s), "apu-ctrl", &s->apu_ctrl,
> +                            TYPE_XLNX_ZYNQMP_APU_CTRL);
> +    sbd = SYS_BUS_DEVICE(&s->apu_ctrl);
> +
> +    for (i = 0; i < XLNX_ZYNQMP_NUM_APU_CPUS; i++) {
> +        g_autofree gchar *name = g_strdup_printf("cpu%d", i);
> +
> +        object_property_set_link(OBJECT(&s->apu_ctrl), name,
> +                                 OBJECT(&s->apu_cpu[i]), &error_abort);
> +    }
> +
> +    sysbus_realize(sbd, &error_fatal);
> +    sysbus_mmio_map(sbd, 0, APU_ADDR);
> +    sysbus_connect_irq(sbd, 0, gic[APU_IRQ]);
> +}
> +
>  static void xlnx_zynqmp_create_crf(XlnxZynqMPState *s, qemu_irq *gic)
>  {
>      SysBusDevice *sbd;
> @@ -302,7 +323,6 @@ static void xlnx_zynqmp_create_unimp_mmio(XlnxZynqMPState *s)
>          hwaddr base;
>          hwaddr size;
>      } unimp_areas[ARRAY_SIZE(s->mr_unimp)] = {
> -        { .name = "apu", APU_ADDR, APU_SIZE },
>          { .name = "serdes", SERDES_ADDR, SERDES_SIZE },
>      };
>      unsigned int nr;
> @@ -698,6 +718,7 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
>  
>      xlnx_zynqmp_create_bbram(s, gic_spi);
>      xlnx_zynqmp_create_efuse(s, gic_spi);
> +    xlnx_zynqmp_create_apu_ctrl(s, gic_spi);
>      xlnx_zynqmp_create_crf(s, gic_spi);
>      xlnx_zynqmp_create_unimp_mmio(s);
>  
> -- 
> 2.25.1
> 

--