qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org
Subject: [PATCH v5 6/6] tcg/sparc: Support unaligned access for user-only
Date: Sun,  6 Feb 2022 21:31:38 +1100	[thread overview]
Message-ID: <20220206103138.36105-7-richard.henderson@linaro.org> (raw)
In-Reply-To: <20220206103138.36105-1-richard.henderson@linaro.org>

This is kinda sorta the opposite of the other tcg hosts, where
we get (normal) alignment checks for free with host SIGBUS and
need to add code to support unaligned accesses.

This inline code expansion is somewhat large, but it takes quite
a few instructions to make a function call to a helper anyway.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 tcg/sparc/tcg-target.c.inc | 219 +++++++++++++++++++++++++++++++++++--
 1 file changed, 211 insertions(+), 8 deletions(-)

diff --git a/tcg/sparc/tcg-target.c.inc b/tcg/sparc/tcg-target.c.inc
index c81782d6ce..e5d2115e94 100644
--- a/tcg/sparc/tcg-target.c.inc
+++ b/tcg/sparc/tcg-target.c.inc
@@ -211,6 +211,7 @@ static const int tcg_target_call_oarg_regs[] = {
 #define ARITH_ADD  (INSN_OP(2) | INSN_OP3(0x00))
 #define ARITH_ADDCC (INSN_OP(2) | INSN_OP3(0x10))
 #define ARITH_AND  (INSN_OP(2) | INSN_OP3(0x01))
+#define ARITH_ANDCC (INSN_OP(2) | INSN_OP3(0x11))
 #define ARITH_ANDN (INSN_OP(2) | INSN_OP3(0x05))
 #define ARITH_OR   (INSN_OP(2) | INSN_OP3(0x02))
 #define ARITH_ORCC (INSN_OP(2) | INSN_OP3(0x12))
@@ -1017,6 +1018,38 @@ static void build_trampolines(TCGContext *s)
         tcg_out_mov_delay(s, TCG_REG_O0, TCG_AREG0);
     }
 }
+#else
+static const tcg_insn_unit *qemu_unalign_ld_trampoline;
+static const tcg_insn_unit *qemu_unalign_st_trampoline;
+
+static void build_trampolines(TCGContext *s)
+{
+    for (int ld = 0; ld < 2; ++ld) {
+        void *helper;
+
+        while ((uintptr_t)s->code_ptr & 15) {
+            tcg_out_nop(s);
+        }
+
+        if (ld) {
+            helper = helper_unaligned_ld;
+            qemu_unalign_ld_trampoline = tcg_splitwx_to_rx(s->code_ptr);
+        } else {
+            helper = helper_unaligned_st;
+            qemu_unalign_st_trampoline = tcg_splitwx_to_rx(s->code_ptr);
+        }
+
+        if (!SPARC64 && TARGET_LONG_BITS == 64) {
+            /* Install the high part of the address.  */
+            tcg_out_arithi(s, TCG_REG_O1, TCG_REG_O2, 32, SHIFT_SRLX);
+        }
+
+        /* Tail call.  */
+        tcg_out_jmpl_const(s, helper, true, true);
+        /* delay slot -- set the env argument */
+        tcg_out_mov_delay(s, TCG_REG_O0, TCG_AREG0);
+    }
+}
 #endif
 
 /* Generate global QEMU prologue and epilogue code */
@@ -1067,9 +1100,7 @@ static void tcg_target_qemu_prologue(TCGContext *s)
     /* delay slot */
     tcg_out_movi_imm13(s, TCG_REG_O0, 0);
 
-#ifdef CONFIG_SOFTMMU
     build_trampolines(s);
-#endif
 }
 
 static void tcg_out_nop_fill(tcg_insn_unit *p, int count)
@@ -1154,18 +1185,22 @@ static TCGReg tcg_out_tlb_load(TCGContext *s, TCGReg addr, int mem_index,
 static const int qemu_ld_opc[(MO_SSIZE | MO_BSWAP) + 1] = {
     [MO_UB]   = LDUB,
     [MO_SB]   = LDSB,
+    [MO_UB | MO_LE] = LDUB,
+    [MO_SB | MO_LE] = LDSB,
 
     [MO_BEUW] = LDUH,
     [MO_BESW] = LDSH,
     [MO_BEUL] = LDUW,
     [MO_BESL] = LDSW,
     [MO_BEUQ] = LDX,
+    [MO_BESQ] = LDX,
 
     [MO_LEUW] = LDUH_LE,
     [MO_LESW] = LDSH_LE,
     [MO_LEUL] = LDUW_LE,
     [MO_LESL] = LDSW_LE,
     [MO_LEUQ] = LDX_LE,
+    [MO_LESQ] = LDX_LE,
 };
 
 static const int qemu_st_opc[(MO_SIZE | MO_BSWAP) + 1] = {
@@ -1184,11 +1219,12 @@ static void tcg_out_qemu_ld(TCGContext *s, TCGReg data, TCGReg addr,
                             MemOpIdx oi, bool is_64)
 {
     MemOp memop = get_memop(oi);
+    tcg_insn_unit *label_ptr;
+
 #ifdef CONFIG_SOFTMMU
     unsigned memi = get_mmuidx(oi);
     TCGReg addrz, param;
     const tcg_insn_unit *func;
-    tcg_insn_unit *label_ptr;
 
     addrz = tcg_out_tlb_load(s, addr, memi, memop,
                              offsetof(CPUTLBEntry, addr_read));
@@ -1252,13 +1288,99 @@ static void tcg_out_qemu_ld(TCGContext *s, TCGReg data, TCGReg addr,
 
     *label_ptr |= INSN_OFF19(tcg_ptr_byte_diff(s->code_ptr, label_ptr));
 #else
+    TCGReg index = (guest_base ? TCG_GUEST_BASE_REG : TCG_REG_G0);
+    unsigned a_bits = get_alignment_bits(memop);
+    unsigned s_bits = memop & MO_SIZE;
+    unsigned t_bits;
+
     if (SPARC64 && TARGET_LONG_BITS == 32) {
         tcg_out_arithi(s, TCG_REG_T1, addr, 0, SHIFT_SRL);
         addr = TCG_REG_T1;
     }
-    tcg_out_ldst_rr(s, data, addr,
-                    (guest_base ? TCG_GUEST_BASE_REG : TCG_REG_G0),
+
+    /*
+     * Normal case: alignment equal to access size.
+     */
+    if (a_bits == s_bits) {
+        tcg_out_ldst_rr(s, data, addr, index,
+                        qemu_ld_opc[memop & (MO_BSWAP | MO_SSIZE)]);
+        return;
+    }
+
+    /*
+     * Test for at least natural alignment, and assume most accesses
+     * will be aligned -- perform a straight load in the delay slot.
+     * This is required to preserve atomicity for aligned accesses.
+     */
+    t_bits = MAX(a_bits, s_bits);
+    tcg_debug_assert(t_bits < 13);
+    tcg_out_arithi(s, TCG_REG_G0, addr, (1u << t_bits) - 1, ARITH_ANDCC);
+
+    /* beq,a,pt %icc, label */
+    label_ptr = s->code_ptr;
+    tcg_out_bpcc0(s, COND_E, BPCC_A | BPCC_PT | BPCC_ICC, 0);
+    /* delay slot */
+    tcg_out_ldst_rr(s, data, addr, index,
                     qemu_ld_opc[memop & (MO_BSWAP | MO_SSIZE)]);
+
+    if (a_bits >= s_bits) {
+        /*
+         * Overalignment: A successful alignment test will perform the memory
+         * operation in the delay slot, and failure need only invoke the
+         * handler for SIGBUS.
+         */
+        TCGReg arg_low = TCG_REG_O1 + (!SPARC64 && TARGET_LONG_BITS == 64);
+        tcg_out_call_nodelay(s, qemu_unalign_ld_trampoline, false);
+        /* delay slot -- move to low part of argument reg */
+        tcg_out_mov_delay(s, arg_low, addr);
+    } else {
+        /* Underalignment: load by pieces of minimum alignment. */
+        int ld_opc, a_size, s_size, i;
+
+        /*
+         * Force full address into T1 early; avoids problems with
+         * overlap between @addr and @data.
+         */
+        tcg_out_arith(s, TCG_REG_T1, addr, index, ARITH_ADD);
+
+        a_size = 1 << a_bits;
+        s_size = 1 << s_bits;
+        if ((memop & MO_BSWAP) == MO_BE) {
+            ld_opc = qemu_ld_opc[a_bits | MO_BE | (memop & MO_SIGN)];
+            tcg_out_ldst(s, data, TCG_REG_T1, 0, ld_opc);
+            ld_opc = qemu_ld_opc[a_bits | MO_BE];
+            for (i = a_size; i < s_size; i += a_size) {
+                tcg_out_ldst(s, TCG_REG_T2, TCG_REG_T1, i, ld_opc);
+                tcg_out_arithi(s, data, data, a_size, SHIFT_SLLX);
+                tcg_out_arith(s, data, data, TCG_REG_T2, ARITH_OR);
+            }
+        } else if (a_bits == 0) {
+            ld_opc = LDUB;
+            tcg_out_ldst(s, data, TCG_REG_T1, 0, ld_opc);
+            for (i = a_size; i < s_size; i += a_size) {
+                if ((memop & MO_SIGN) && i == s_size - a_size) {
+                    ld_opc = LDSB;
+                }
+                tcg_out_ldst(s, TCG_REG_T2, TCG_REG_T1, i, ld_opc);
+                tcg_out_arithi(s, TCG_REG_T2, TCG_REG_T2, i * 8, SHIFT_SLLX);
+                tcg_out_arith(s, data, data, TCG_REG_T2, ARITH_OR);
+            }
+        } else {
+            ld_opc = qemu_ld_opc[a_bits | MO_LE];
+            tcg_out_ldst_rr(s, data, TCG_REG_T1, TCG_REG_G0, ld_opc);
+            for (i = a_size; i < s_size; i += a_size) {
+                tcg_out_arithi(s, TCG_REG_T1, TCG_REG_T1, a_size, ARITH_ADD);
+                if ((memop & MO_SIGN) && i == s_size - a_size) {
+                    ld_opc = qemu_ld_opc[a_bits | MO_LE | MO_SIGN];
+                }
+                tcg_out_ldst_rr(s, TCG_REG_T2, TCG_REG_T1, TCG_REG_G0, ld_opc);
+                tcg_out_arithi(s, TCG_REG_T2, TCG_REG_T2, i * 8, SHIFT_SLLX);
+                tcg_out_arith(s, data, data, TCG_REG_T2, ARITH_OR);
+            }
+        }
+    }
+
+    *label_ptr |= INSN_OFF19(tcg_ptr_byte_diff(s->code_ptr, label_ptr));
 #endif /* CONFIG_SOFTMMU */
 }
 
@@ -1266,11 +1388,12 @@ static void tcg_out_qemu_st(TCGContext *s, TCGReg data, TCGReg addr,
                             MemOpIdx oi)
 {
     MemOp memop = get_memop(oi);
+    tcg_insn_unit *label_ptr;
+
 #ifdef CONFIG_SOFTMMU
     unsigned memi = get_mmuidx(oi);
     TCGReg addrz, param;
     const tcg_insn_unit *func;
-    tcg_insn_unit *label_ptr;
 
     addrz = tcg_out_tlb_load(s, addr, memi, memop,
                              offsetof(CPUTLBEntry, addr_write));
@@ -1307,13 +1430,93 @@ static void tcg_out_qemu_st(TCGContext *s, TCGReg data, TCGReg addr,
 
     *label_ptr |= INSN_OFF19(tcg_ptr_byte_diff(s->code_ptr, label_ptr));
 #else
+    TCGReg index = (guest_base ? TCG_GUEST_BASE_REG : TCG_REG_G0);
+    unsigned a_bits = get_alignment_bits(memop);
+    unsigned s_bits = memop & MO_SIZE;
+    unsigned t_bits;
+
     if (SPARC64 && TARGET_LONG_BITS == 32) {
         tcg_out_arithi(s, TCG_REG_T1, addr, 0, SHIFT_SRL);
         addr = TCG_REG_T1;
     }
-    tcg_out_ldst_rr(s, data, addr,
-                    (guest_base ? TCG_GUEST_BASE_REG : TCG_REG_G0),
+
+    /*
+     * Normal case: alignment equal to access size.
+     */
+    if (a_bits == s_bits) {
+        tcg_out_ldst_rr(s, data, addr, index,
+                        qemu_st_opc[memop & (MO_BSWAP | MO_SIZE)]);
+        return;
+    }
+
+    /*
+     * Test for at least natural alignment, and assume most accesses
+     * will be aligned -- perform a straight store in the delay slot.
+     * This is required to preserve atomicity for aligned accesses.
+     */
+    t_bits = MAX(a_bits, s_bits);
+    tcg_debug_assert(t_bits < 13);
+    tcg_out_arithi(s, TCG_REG_G0, addr, (1u << t_bits) - 1, ARITH_ANDCC);
+
+    /* beq,a,pt %icc, label */
+    label_ptr = s->code_ptr;
+    tcg_out_bpcc0(s, COND_E, BPCC_A | BPCC_PT | BPCC_ICC, 0);
+    /* delay slot */
+    tcg_out_ldst_rr(s, data, addr, index,
                     qemu_st_opc[memop & (MO_BSWAP | MO_SIZE)]);
+
+    if (a_bits >= s_bits) {
+        /*
+         * Overalignment: A successful alignment test will perform the memory
+         * operation in the delay slot, and failure need only invoke the
+         * handler for SIGBUS.
+         */
+        TCGReg arg_low = TCG_REG_O1 + (!SPARC64 && TARGET_LONG_BITS == 64);
+        tcg_out_call_nodelay(s, qemu_unalign_st_trampoline, false);
+        /* delay slot -- move to low part of argument reg */
+        tcg_out_mov_delay(s, arg_low, addr);
+    } else {
+        /* Underalignment: store by pieces of minimum alignment. */
+        int st_opc, a_size, s_size, i;
+
+        /*
+         * Force full address into T1 early; avoids problems with
+         * overlap between @addr and @data.
+         */
+        tcg_out_arith(s, TCG_REG_T1, addr, index, ARITH_ADD);
+
+        a_size = 1 << a_bits;
+        s_size = 1 << s_bits;
+        if ((memop & MO_BSWAP) == MO_BE) {
+            st_opc = qemu_st_opc[a_bits | MO_BE];
+            for (i = 0; i < s_size; i += a_size) {
+                TCGReg d = data;
+                int shift = (s_size - a_size - i) * 8;
+                if (shift) {
+                    d = TCG_REG_T2;
+                    tcg_out_arithi(s, d, data, shift, SHIFT_SRLX);
+                }
+                tcg_out_ldst(s, d, TCG_REG_T1, i, st_opc);
+            }
+        } else if (a_bits == 0) {
+            tcg_out_ldst(s, data, TCG_REG_T1, 0, STB);
+            for (i = 1; i < s_size; i++) {
+                tcg_out_arithi(s, TCG_REG_T2, data, i * 8, SHIFT_SRLX);
+                tcg_out_ldst(s, TCG_REG_T2, TCG_REG_T1, i, STB);
+            }
+        } else {
+            /* Note that ST*A with immediate asi must use indexed address. */
+            st_opc = qemu_st_opc[a_bits + MO_LE];
+            tcg_out_ldst_rr(s, data, TCG_REG_T1, TCG_REG_G0, st_opc);
+            for (i = a_size; i < s_size; i += a_size) {
+                tcg_out_arithi(s, TCG_REG_T2, data, i * 8, SHIFT_SRLX);
+                tcg_out_arithi(s, TCG_REG_T1, TCG_REG_T1, a_size, ARITH_ADD);
+                tcg_out_ldst_rr(s, TCG_REG_T2, TCG_REG_T1, TCG_REG_G0, st_opc);
+            }
+        }
+    }
+
+    *label_ptr |= INSN_OFF19(tcg_ptr_byte_diff(s->code_ptr, label_ptr));
 #endif /* CONFIG_SOFTMMU */
 }
 
-- 
2.25.1



  parent reply	other threads:[~2022-02-06 10:44 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-06 10:31 [PATCH v5 0/6] tcg/sparc: Unaligned access for user-only Richard Henderson
2022-02-06 10:31 ` [PATCH v5 1/6] tcg/sparc: Add scratch argument to tcg_out_movi_int Richard Henderson
2022-02-07 17:59   ` Peter Maydell
2022-02-07 21:48     ` Richard Henderson
2022-02-06 10:31 ` [PATCH v5 2/6] tcg/sparc: Improve code gen for shifted 32-bit constants Richard Henderson
2022-02-06 10:31 ` [PATCH v5 3/6] tcg/sparc: Convert patch_reloc to return bool Richard Henderson
2022-02-06 10:45   ` Peter Maydell
2022-02-06 10:31 ` [PATCH v5 4/6] tcg/sparc: Use the constant pool for 64-bit constants Richard Henderson
2022-02-06 10:31 ` [PATCH v5 5/6] tcg/sparc: Add tcg_out_jmpl_const for better tail calls Richard Henderson
2022-02-06 10:31 ` Richard Henderson [this message]
2022-02-07 18:30   ` [PATCH v5 6/6] tcg/sparc: Support unaligned access for user-only Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220206103138.36105-7-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).