[PATCH v10 3/3] target/ppc: EBB exception implementation

[Daniel Henrique Barboza <danielhb413@gmail.com>]

This patch adds the EBB exception support that are triggered by
Performance Monitor alerts. This happens when a Performance Monitor
alert occurs and MMCR0_EBE, BESCR_PME and BESCR_GE are set.

A 'ebb_excp_enabled' helper is called at the end of fire_PMC_interrupt()
to fire the EBB exception, checking for FSCR and HFSCR support
beforehand.

In ppc_hw_interrupt() the generated EBB exception will be taken only if
running in problem state and with BESCR_GE set. The check for BESCR_GE
bit in this step is needed to avoid race conditions where we take an
EBB, while the previous EBB is still inflight (BESCR_GE cleared), and
SPR_EBBHR is not set yet. In this case we'll branch to env->nip = 0 and the
guest will crash. The Linux kernel selftest 'lost_exception_test' is an
example where this racing will occur.

The code in powerpc_excp_books() is the default EBB handling described
in the PowerISA v3.1: clear BESCR_GE, set BESCR_PMEO, save env->nip in
SPR_EBBRR and redirect the execution to the address pointed by
SPR_EBBHR. The already implemented 'rbebb' instruction is then able to
return from the EBB by retrieving the NIP in SPR_EBBRR.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
---
 target/ppc/excp_helper.c | 51 +++++++++++++++++++++++++++++++++++++---
 target/ppc/helper.h      |  1 +
 target/ppc/power8-pmu.c  | 12 ++++++++--
 3 files changed, 59 insertions(+), 5 deletions(-)

diff --git a/target/ppc/excp_helper.c b/target/ppc/excp_helper.c
index 8a49a4ab90..2a95cec39e 100644
--- a/target/ppc/excp_helper.c
+++ b/target/ppc/excp_helper.c
@@ -19,6 +19,7 @@
 #include "qemu/osdep.h"
 #include "qemu/main-loop.h"
 #include "cpu.h"
+#include "hw/ppc/ppc.h"
 #include "exec/exec-all.h"
 #include "internal.h"
 #include "helper_regs.h"
@@ -990,8 +991,22 @@ static void powerpc_excp_books(PowerPCCPU *cpu, int excp)
         new_msr |= (target_ulong)MSR_HVB;
         new_msr |= env->msr & ((target_ulong)1 << MSR_RI);
         break;
-    case POWERPC_EXCP_THERM:     /* Thermal interrupt                        */
     case POWERPC_EXCP_PERFM:     /* Embedded performance monitor interrupt   */
+        env->spr[SPR_BESCR] &= ~BESCR_GE;
+        env->spr[SPR_BESCR] |= BESCR_PMEO;
+
+        /*
+         * Save NIP for rfebb insn in SPR_EBBRR. Next nip is
+         * stored in the EBB Handler SPR_EBBHR.
+         */
+        env->spr[SPR_EBBRR] = env->nip;
+        powerpc_set_excp_state(cpu, env->spr[SPR_EBBHR], env->msr);
+
+        /*
+         * This exception is handled in userspace. No need to proceed.
+         */
+        return;
+    case POWERPC_EXCP_THERM:     /* Thermal interrupt                        */
     case POWERPC_EXCP_VPUA:      /* Vector assist exception                  */
     case POWERPC_EXCP_MAINT:     /* Maintenance exception                    */
     case POWERPC_EXCP_SDOOR:     /* Doorbell interrupt                       */
@@ -1671,8 +1686,14 @@ static void ppc_hw_interrupt(CPUPPCState *env)
             return;
         }
         if (env->pending_interrupts & (1 << PPC_INTERRUPT_PERFM)) {
-            env->pending_interrupts &= ~(1 << PPC_INTERRUPT_PERFM);
-            powerpc_excp(cpu, POWERPC_EXCP_PERFM);
+            /*
+             * PERFM EBB must be taken in problem state and
+             * with BESCR_GE set.
+             */
+            if (msr_pr == 1 && env->spr[SPR_BESCR] & BESCR_GE) {
+                env->pending_interrupts &= ~(1 << PPC_INTERRUPT_PERFM);
+                powerpc_excp(cpu, POWERPC_EXCP_PERFM);
+            }
             return;
         }
         /* Thermal interrupt */
@@ -1915,6 +1936,30 @@ void helper_rfebb(CPUPPCState *env, target_ulong s)
         env->spr[SPR_BESCR] &= ~BESCR_GE;
     }
 }
+
+void helper_ebb_perfm_int(CPUPPCState *env)
+{
+    PowerPCCPU *cpu = env_archcpu(env);
+
+    /*
+     * FSCR_EBB and FSCR_IC_EBB are the same bits used with
+     * HFSCR.
+     */
+    helper_fscr_facility_check(env, FSCR_EBB, 0, FSCR_IC_EBB);
+    helper_hfscr_facility_check(env, FSCR_EBB, "EBB", FSCR_IC_EBB);
+
+    /*
+     * Setting "env->pending_interrupts |= 1 << PPC_INTERRUPT_PERFM"
+     * instead of calling "ppc_set_irq()"" works in most cases, but under
+     * certain race conditions (e.g. lost_exception_test EBB kernel
+     * selftest) this hits an assert when dealing with the BQL:
+     *
+     * tcg_handle_interrupt: assertion failed: (qemu_mutex_iothread_locked())
+     *
+     * We ended up using ppc_set_irq() because it handles the BQL.
+     */
+    ppc_set_irq(cpu, PPC_INTERRUPT_PERFM, 1);
+}
 #endif
 
 /*****************************************************************************/
diff --git a/target/ppc/helper.h b/target/ppc/helper.h
index f2e5060910..bb26da6176 100644
--- a/target/ppc/helper.h
+++ b/target/ppc/helper.h
@@ -19,6 +19,7 @@ DEF_HELPER_1(rfid, void, env)
 DEF_HELPER_1(rfscv, void, env)
 DEF_HELPER_1(hrfid, void, env)
 DEF_HELPER_2(rfebb, void, env, tl)
+DEF_HELPER_1(ebb_perfm_int, void, env)
 DEF_HELPER_2(store_lpcr, void, env, tl)
 DEF_HELPER_2(store_pcr, void, env, tl)
 DEF_HELPER_2(store_mmcr0, void, env, tl)
diff --git a/target/ppc/power8-pmu.c b/target/ppc/power8-pmu.c
index d245663158..41409e609f 100644
--- a/target/ppc/power8-pmu.c
+++ b/target/ppc/power8-pmu.c
@@ -281,6 +281,13 @@ void helper_store_pmc(CPUPPCState *env, uint32_t sprn, uint64_t value)
     pmc_update_overflow_timer(env, sprn);
 }
 
+static bool ebb_excp_enabled(CPUPPCState *env)
+{
+    return env->spr[SPR_POWER_MMCR0] & MMCR0_EBE &&
+           env->spr[SPR_BESCR] & BESCR_PME &&
+           env->spr[SPR_BESCR] & BESCR_GE;
+}
+
 static void fire_PMC_interrupt(PowerPCCPU *cpu)
 {
     CPUPPCState *env = &cpu->env;
@@ -307,8 +314,9 @@ static void fire_PMC_interrupt(PowerPCCPU *cpu)
         env->spr[SPR_POWER_MMCR0] |= MMCR0_PMAO;
     }
 
-    /* PMC interrupt not implemented yet */
-    return;
+    if (ebb_excp_enabled(env)) {
+        helper_ebb_perfm_int(env);
+    }
 }
 
 /* This helper assumes that the PMC is running. */
-- 
2.34.1