[PATCH v2 0/7] aspeed extensions

[PATCH v2 0/7] aspeed extensions

[Cédric Le Goater]

Hi,

Here is a set of extensions for the Aspeed machines, the most
important ones being the removal of a deprecated machine and a simple
model for the Secure Boot Controller, both from Joel.

Thanks,

C. 

Changes in v2:

 - new create_pca9552() helper (Philippe)
 - fixed typos
 - fixed removal of the swift machine

Cédric Le Goater (3):
  aspeed: Introduce a create_pca9552() helper
  aspeed/smc: Add an address mask on segment registers
  aspeed/sdmc: Add trace events

Joel Stanley (4):
  arm: Remove swift-bmc machine
  ast2600: Add Secure Boot Controller model
  aspeed: rainier: Add i2c LED devices
  aspeed: rainier: Add strap values taken from hardware

 docs/about/deprecated.rst       |   7 --
 docs/about/removed-features.rst |   5 ++
 docs/system/arm/aspeed.rst      |   1 -
 include/hw/arm/aspeed_soc.h     |   3 +
 include/hw/misc/aspeed_sbc.h    |  32 ++++++++
 include/hw/ssi/aspeed_smc.h     |   1 +
 hw/arm/aspeed.c                 |  98 ++++++----------------
 hw/arm/aspeed_ast2600.c         |   9 ++
 hw/misc/aspeed_sbc.c            | 141 ++++++++++++++++++++++++++++++++
 hw/misc/aspeed_sdmc.c           |   2 +
 hw/ssi/aspeed_smc.c             |  11 +++
 hw/misc/meson.build             |   1 +
 hw/misc/trace-events            |   4 +
 13 files changed, 236 insertions(+), 79 deletions(-)
 create mode 100644 include/hw/misc/aspeed_sbc.h
 create mode 100644 hw/misc/aspeed_sbc.c

-- 
2.34.1

[PATCH v2 1/7] arm: Remove swift-bmc machine

[Cédric Le Goater]

From: Joel Stanley <joel@jms.id.au>

It was scheduled for removal in 7.0.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220217103141.385345-1-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 docs/about/deprecated.rst       |  7 ----
 docs/about/removed-features.rst |  5 +++
 docs/system/arm/aspeed.rst      |  1 -
 hw/arm/aspeed.c                 | 64 ---------------------------------
 4 files changed, 5 insertions(+), 72 deletions(-)

diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst
index 26d00812ba94..85773db631c1 100644
--- a/docs/about/deprecated.rst
+++ b/docs/about/deprecated.rst
@@ -315,13 +315,6 @@ Use the more generic event ``DEVICE_UNPLUG_GUEST_ERROR`` instead.
 System emulator machines
 ------------------------
 
-Aspeed ``swift-bmc`` machine (since 6.1)
-''''''''''''''''''''''''''''''''''''''''
-
-This machine is deprecated because we have enough AST2500 based OpenPOWER
-machines. It can be easily replaced by the ``witherspoon-bmc`` or the
-``romulus-bmc`` machines.
-
 PPC 405 ``taihu`` machine (since 7.0)
 '''''''''''''''''''''''''''''''''''''
 
diff --git a/docs/about/removed-features.rst b/docs/about/removed-features.rst
index cb0575fd4975..4b831ea29176 100644
--- a/docs/about/removed-features.rst
+++ b/docs/about/removed-features.rst
@@ -588,6 +588,11 @@ The Raspberry Pi machines come in various models (A, A+, B, B+). To be able
 to distinguish which model QEMU is implementing, the ``raspi2`` and ``raspi3``
 machines have been renamed ``raspi2b`` and ``raspi3b``.
 
+Aspeed ``swift-bmc`` machine (removed in 7.0)
+'''''''''''''''''''''''''''''''''''''''''''''
+
+This machine was removed because it was unused. Alternative AST2500 based
+OpenPOWER machines are ``witherspoon-bmc`` and ``romulus-bmc``.
 
 linux-user mode CPUs
 --------------------
diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst
index d8b102fa0ad0..60ed94f18759 100644
--- a/docs/system/arm/aspeed.rst
+++ b/docs/system/arm/aspeed.rst
@@ -22,7 +22,6 @@ AST2500 SoC based machines :
 - ``romulus-bmc``          OpenPOWER Romulus POWER9 BMC
 - ``witherspoon-bmc``      OpenPOWER Witherspoon POWER9 BMC
 - ``sonorapass-bmc``       OCP SonoraPass BMC
-- ``swift-bmc``            OpenPOWER Swift BMC POWER9 (to be removed in v7.0)
 - ``fp5280g2-bmc``         Inspur FP5280G2 BMC
 - ``g220a-bmc``            Bytedance G220A BMC
 
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index d911dc904fb3..faf7a9fd6863 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -106,17 +106,6 @@ struct AspeedMachineState {
         SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) |                       \
         SCU_AST2500_HW_STRAP_RESERVED1)
 
-/* Swift hardware value: 0xF11AD206 */
-#define SWIFT_BMC_HW_STRAP1 (                                           \
-        AST2500_HW_STRAP1_DEFAULTS |                                    \
-        SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE |                     \
-        SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE |                        \
-        SCU_AST2500_HW_STRAP_UART_DEBUG |                               \
-        SCU_AST2500_HW_STRAP_DDR4_ENABLE |                              \
-        SCU_H_PLL_BYPASS_EN |                                           \
-        SCU_AST2500_HW_STRAP_ACPI_ENABLE |                              \
-        SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
-
 #define G220A_BMC_HW_STRAP1 (                                      \
         SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE |                     \
         SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE |                        \
@@ -544,35 +533,6 @@ static void romulus_bmc_i2c_init(AspeedMachineState *bmc)
     i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
 }
 
-static void swift_bmc_i2c_init(AspeedMachineState *bmc)
-{
-    AspeedSoCState *soc = &bmc->soc;
-
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3), "pca9552", 0x60);
-
-    /* The swift board expects a TMP275 but a TMP105 is compatible */
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "tmp105", 0x48);
-    /* The swift board expects a pca9551 but a pca9552 is compatible */
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x60);
-
-    /* The swift board expects an Epson RX8900 RTC but a ds1338 is compatible */
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "ds1338", 0x32);
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60);
-
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "tmp423", 0x4c);
-    /* The swift board expects a pca9539 but a pca9552 is compatible */
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "pca9552", 0x74);
-
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 10), "tmp423", 0x4c);
-    /* The swift board expects a pca9539 but a pca9552 is compatible */
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 10), "pca9552",
-                     0x74);
-
-    /* The swift board expects a TMP275 but a TMP105 is compatible */
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 12), "tmp105", 0x48);
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 12), "tmp105", 0x4a);
-}
-
 static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc)
 {
     AspeedSoCState *soc = &bmc->soc;
@@ -1102,26 +1062,6 @@ static void aspeed_machine_sonorapass_class_init(ObjectClass *oc, void *data)
         aspeed_soc_num_cpus(amc->soc_name);
 };
 
-static void aspeed_machine_swift_class_init(ObjectClass *oc, void *data)
-{
-    MachineClass *mc = MACHINE_CLASS(oc);
-    AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
-
-    mc->desc       = "OpenPOWER Swift BMC (ARM1176)";
-    amc->soc_name  = "ast2500-a1";
-    amc->hw_strap1 = SWIFT_BMC_HW_STRAP1;
-    amc->fmc_model = "mx66l1g45g";
-    amc->spi_model = "mx66l1g45g";
-    amc->num_cs    = 2;
-    amc->i2c_init  = swift_bmc_i2c_init;
-    mc->default_ram_size       = 512 * MiB;
-    mc->default_cpus = mc->min_cpus = mc->max_cpus =
-        aspeed_soc_num_cpus(amc->soc_name);
-
-    mc->deprecation_reason = "redundant system. Please use a similar "
-        "OpenPOWER BMC, Witherspoon or Romulus.";
-};
-
 static void aspeed_machine_witherspoon_class_init(ObjectClass *oc, void *data)
 {
     MachineClass *mc = MACHINE_CLASS(oc);
@@ -1277,10 +1217,6 @@ static const TypeInfo aspeed_machine_types[] = {
         .name          = MACHINE_TYPE_NAME("romulus-bmc"),
         .parent        = TYPE_ASPEED_MACHINE,
         .class_init    = aspeed_machine_romulus_class_init,
-    }, {
-        .name          = MACHINE_TYPE_NAME("swift-bmc"),
-        .parent        = TYPE_ASPEED_MACHINE,
-        .class_init    = aspeed_machine_swift_class_init,
     }, {
         .name          = MACHINE_TYPE_NAME("sonorapass-bmc"),
         .parent        = TYPE_ASPEED_MACHINE,
-- 
2.34.1

[PATCH v2 2/7] ast2600: Add Secure Boot Controller model

[Cédric Le Goater]

From: Joel Stanley <joel@jms.id.au>

Just a stub that indicates the system has booted in secure boot mode.
Used for testing the driver:

 https://lore.kernel.org/all/20211019080608.283324-1-joel@jms.id.au/

Signed-off-by: Joel Stanley <joel@jms.id.au>
[ clg: - Fixed typo
       - Adjusted Copyright dates ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 include/hw/arm/aspeed_soc.h  |   3 +
 include/hw/misc/aspeed_sbc.h |  32 ++++++++
 hw/arm/aspeed_ast2600.c      |   9 +++
 hw/misc/aspeed_sbc.c         | 141 +++++++++++++++++++++++++++++++++++
 hw/misc/meson.build          |   1 +
 5 files changed, 186 insertions(+)
 create mode 100644 include/hw/misc/aspeed_sbc.h
 create mode 100644 hw/misc/aspeed_sbc.c

diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h
index cae9906684cb..da043dcb454d 100644
--- a/include/hw/arm/aspeed_soc.h
+++ b/include/hw/arm/aspeed_soc.h
@@ -24,6 +24,7 @@
 #include "hw/misc/aspeed_i3c.h"
 #include "hw/ssi/aspeed_smc.h"
 #include "hw/misc/aspeed_hace.h"
+#include "hw/misc/aspeed_sbc.h"
 #include "hw/watchdog/wdt_aspeed.h"
 #include "hw/net/ftgmac100.h"
 #include "target/arm/cpu.h"
@@ -60,6 +61,7 @@ struct AspeedSoCState {
     AspeedSMCState fmc;
     AspeedSMCState spi[ASPEED_SPIS_NUM];
     EHCISysBusState ehci[ASPEED_EHCIS_NUM];
+    AspeedSBCState sbc;
     AspeedSDMCState sdmc;
     AspeedWDTState wdt[ASPEED_WDTS_NUM];
     FTGMAC100State ftgmac100[ASPEED_MACS_NUM];
@@ -109,6 +111,7 @@ enum {
     ASPEED_DEV_SDMC,
     ASPEED_DEV_SCU,
     ASPEED_DEV_ADC,
+    ASPEED_DEV_SBC,
     ASPEED_DEV_VIDEO,
     ASPEED_DEV_SRAM,
     ASPEED_DEV_SDHCI,
diff --git a/include/hw/misc/aspeed_sbc.h b/include/hw/misc/aspeed_sbc.h
new file mode 100644
index 000000000000..651747e28f3a
--- /dev/null
+++ b/include/hw/misc/aspeed_sbc.h
@@ -0,0 +1,32 @@
+/*
+ * ASPEED Secure Boot Controller
+ *
+ * Copyright (C) 2021-2022 IBM Corp.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef ASPEED_SBC_H
+#define ASPEED_SBC_H
+
+#include "hw/sysbus.h"
+
+#define TYPE_ASPEED_SBC "aspeed.sbc"
+#define TYPE_ASPEED_AST2600_SBC TYPE_ASPEED_SBC "-ast2600"
+OBJECT_DECLARE_TYPE(AspeedSBCState, AspeedSBCClass, ASPEED_SBC)
+
+#define ASPEED_SBC_NR_REGS (0x93c >> 2)
+
+struct AspeedSBCState {
+    SysBusDevice parent;
+
+    MemoryRegion iomem;
+
+    uint32_t regs[ASPEED_SBC_NR_REGS];
+};
+
+struct AspeedSBCClass {
+    SysBusDeviceClass parent_class;
+};
+
+#endif /* _ASPEED_SBC_H_ */
diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
index 12f6edc081fd..21cd3342c578 100644
--- a/hw/arm/aspeed_ast2600.c
+++ b/hw/arm/aspeed_ast2600.c
@@ -47,6 +47,7 @@ static const hwaddr aspeed_soc_ast2600_memmap[] = {
     [ASPEED_DEV_XDMA]      = 0x1E6E7000,
     [ASPEED_DEV_ADC]       = 0x1E6E9000,
     [ASPEED_DEV_DP]        = 0x1E6EB000,
+    [ASPEED_DEV_SBC]       = 0x1E6F2000,
     [ASPEED_DEV_VIDEO]     = 0x1E700000,
     [ASPEED_DEV_SDHCI]     = 0x1E740000,
     [ASPEED_DEV_EMMC]      = 0x1E750000,
@@ -227,6 +228,8 @@ static void aspeed_soc_ast2600_init(Object *obj)
     object_initialize_child(obj, "hace", &s->hace, typename);
 
     object_initialize_child(obj, "i3c", &s->i3c, TYPE_ASPEED_I3C);
+
+    object_initialize_child(obj, "sbc", &s->sbc, TYPE_ASPEED_SBC);
 }
 
 /*
@@ -539,6 +542,12 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp)
         /* The AST2600 I3C controller has one IRQ per bus. */
         sysbus_connect_irq(SYS_BUS_DEVICE(&s->i3c.devices[i]), 0, irq);
     }
+
+    /* Secure Boot Controller */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->sbc), errp)) {
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->sbc), 0, sc->memmap[ASPEED_DEV_SBC]);
 }
 
 static void aspeed_soc_ast2600_class_init(ObjectClass *oc, void *data)
diff --git a/hw/misc/aspeed_sbc.c b/hw/misc/aspeed_sbc.c
new file mode 100644
index 000000000000..40f2a8c6312f
--- /dev/null
+++ b/hw/misc/aspeed_sbc.c
@@ -0,0 +1,141 @@
+/*
+ * ASPEED Secure Boot Controller
+ *
+ * Copyright (C) 2021-2022 IBM Corp.
+ *
+ * Joel Stanley <joel@jms.id.au>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qemu/error-report.h"
+#include "hw/misc/aspeed_sbc.h"
+#include "qapi/error.h"
+#include "migration/vmstate.h"
+
+#define R_PROT          (0x000 / 4)
+#define R_STATUS        (0x014 / 4)
+
+static uint64_t aspeed_sbc_read(void *opaque, hwaddr addr, unsigned int size)
+{
+    AspeedSBCState *s = ASPEED_SBC(opaque);
+
+    addr >>= 2;
+
+    if (addr >= ASPEED_SBC_NR_REGS) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
+                      __func__, addr << 2);
+        return 0;
+    }
+
+    return s->regs[addr];
+}
+
+static void aspeed_sbc_write(void *opaque, hwaddr addr, uint64_t data,
+                              unsigned int size)
+{
+    AspeedSBCState *s = ASPEED_SBC(opaque);
+
+    addr >>= 2;
+
+    if (addr >= ASPEED_SBC_NR_REGS) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
+                      __func__, addr << 2);
+        return;
+    }
+
+    switch (addr) {
+    case R_STATUS:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: write to read only register 0x%" HWADDR_PRIx "\n",
+                      __func__, addr << 2);
+        return;
+    default:
+        break;
+    }
+
+    s->regs[addr] = data;
+}
+
+static const MemoryRegionOps aspeed_sbc_ops = {
+    .read = aspeed_sbc_read,
+    .write = aspeed_sbc_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 1,
+        .max_access_size = 4,
+    },
+};
+
+static void aspeed_sbc_reset(DeviceState *dev)
+{
+    struct AspeedSBCState *s = ASPEED_SBC(dev);
+
+    memset(s->regs, 0, sizeof(s->regs));
+
+    /* Set secure boot enabled, and boot from emmc/spi */
+    s->regs[R_STATUS] = 1 << 6 | 1 << 5;
+}
+
+static void aspeed_sbc_realize(DeviceState *dev, Error **errp)
+{
+    AspeedSBCState *s = ASPEED_SBC(dev);
+    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+
+    memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_sbc_ops, s,
+            TYPE_ASPEED_SBC, 0x1000);
+
+    sysbus_init_mmio(sbd, &s->iomem);
+}
+
+static const VMStateDescription vmstate_aspeed_sbc = {
+    .name = TYPE_ASPEED_SBC,
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32_ARRAY(regs, AspeedSBCState, ASPEED_SBC_NR_REGS),
+        VMSTATE_END_OF_LIST(),
+    }
+};
+
+static void aspeed_sbc_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->realize = aspeed_sbc_realize;
+    dc->reset = aspeed_sbc_reset;
+    dc->vmsd = &vmstate_aspeed_sbc;
+}
+
+static const TypeInfo aspeed_sbc_info = {
+    .name = TYPE_ASPEED_SBC,
+    .parent = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(AspeedSBCState),
+    .class_init = aspeed_sbc_class_init,
+    .class_size = sizeof(AspeedSBCClass)
+};
+
+static void aspeed_ast2600_sbc_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->desc = "AST2600 Secure Boot Controller";
+}
+
+static const TypeInfo aspeed_ast2600_sbc_info = {
+    .name = TYPE_ASPEED_AST2600_SBC,
+    .parent = TYPE_ASPEED_SBC,
+    .class_init = aspeed_ast2600_sbc_class_init,
+};
+
+static void aspeed_sbc_register_types(void)
+{
+    type_register_static(&aspeed_ast2600_sbc_info);
+    type_register_static(&aspeed_sbc_info);
+}
+
+type_init(aspeed_sbc_register_types);
diff --git a/hw/misc/meson.build b/hw/misc/meson.build
index 6dcbe044f3f0..645585371a8b 100644
--- a/hw/misc/meson.build
+++ b/hw/misc/meson.build
@@ -111,6 +111,7 @@ softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files(
   'aspeed_i3c.c',
   'aspeed_lpc.c',
   'aspeed_scu.c',
+  'aspeed_sbc.c',
   'aspeed_sdmc.c',
   'aspeed_xdma.c'))
 
-- 
2.34.1

[PATCH v2 3/7] aspeed: rainier: Add i2c LED devices

[Cédric Le Goater]

From: Joel Stanley <joel@jms.id.au>

This helps quieten booting the current Rainier kernel.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 hw/arm/aspeed.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index faf7a9fd6863..7590b36bb017 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -712,6 +712,8 @@ static void rainier_bmc_i2c_init(AspeedMachineState *bmc)
 
     aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 0), 0x51, 32 * KiB);
 
+    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3), "pca9552", 0x61);
+
     /* The rainier expects a TMP275 but a TMP105 is compatible */
     i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), TYPE_TMP105,
                      0x48);
@@ -724,11 +726,14 @@ static void rainier_bmc_i2c_init(AspeedMachineState *bmc)
     aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 0), 0x50, 64 * KiB);
     aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x51, 64 * KiB);
     aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 2), 0x52, 64 * KiB);
+    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x60);
 
     i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), TYPE_TMP105,
                      0x48);
     i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), TYPE_TMP105,
                      0x49);
+    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), "pca9552", 0x60);
+    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), "pca9552", 0x61);
     i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5),
                                       "pca9546", 0x70);
     aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 0), 0x50, 64 * KiB);
@@ -747,7 +752,12 @@ static void rainier_bmc_i2c_init(AspeedMachineState *bmc)
     aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 2), 0x50, 64 * KiB);
     aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 3), 0x51, 64 * KiB);
 
+    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x30);
+    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x31);
+    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x32);
+    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x33);
     /* Bus 7: TODO max31785@52 */
+    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x60);
     i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x61);
     i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "dps310", 0x76);
     /* Bus 7: TODO si7021-a20@20 */
@@ -762,6 +772,7 @@ static void rainier_bmc_i2c_init(AspeedMachineState *bmc)
                      0x4a);
     aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 8), 0x50, 64 * KiB);
     aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 8), 0x51, 64 * KiB);
+    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60);
     i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x61);
     /* Bus 8: ucd90320@11 */
     /* Bus 8: ucd90320@b */
@@ -783,13 +794,17 @@ static void rainier_bmc_i2c_init(AspeedMachineState *bmc)
                                       "pca9546", 0x70);
     aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 0), 0x50, 64 * KiB);
     aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x51, 64 * KiB);
+    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "pca9552", 0x60);
 
 
     aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 13), 0x50, 64 * KiB);
+    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 13), "pca9552", 0x60);
 
     aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 14), 0x50, 64 * KiB);
+    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 14), "pca9552", 0x60);
 
     aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 15), 0x50, 64 * KiB);
+    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 15), "pca9552", 0x60);
 }
 
 static void get_pca9548_channels(I2CBus *bus, uint8_t mux_addr,
-- 
2.34.1

[PATCH v2 4/7] aspeed: rainier: Add strap values taken from hardware

[Cédric Le Goater]

From: Joel Stanley <joel@jms.id.au>

When time permits, we should introduce defines for the HW strapping
registers to cleanly decode the values.

SCU500 = 0x00422016
  Disable ARM JTAG trusted world debug: 0x1
  Disable ARM JTAG debug: 0x1
  VGA Memory Size: 0x1 [16MB]
  Cortex M3: 0x1 [Disabled]
  Boot device: 0x1 [eMMC]
  Reserved: 0x1

SCU510 = 0x80000848
  Secure Boot Enable: 0x1
  Enable boot SPI or eMMC ABR (second boot): 0x1
  Enable LPC mode: 0x1 [LPC]
  Disable LPC SuperIO 0x2e/0x4e: 0x1

Signed-off-by: Joel Stanley <joel@jms.id.au>
[ clg: rewrote the commit log ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 hw/arm/aspeed.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 7590b36bb017..f71a5d87473f 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -160,8 +160,8 @@ struct AspeedMachineState {
 #define TACOMA_BMC_HW_STRAP2  0x00000040
 
 /* Rainier hardware value: (QEMU prototype) */
-#define RAINIER_BMC_HW_STRAP1 0x00000000
-#define RAINIER_BMC_HW_STRAP2 0x00000000
+#define RAINIER_BMC_HW_STRAP1 0x00422016
+#define RAINIER_BMC_HW_STRAP2 0x80000848
 
 /* Fuji hardware value */
 #define FUJI_BMC_HW_STRAP1    0x00000000
-- 
2.34.1

[PATCH v2 5/7] aspeed: Introduce a create_pca9552() helper

[Cédric Le Goater]

This unifies the way we create the pca9552 devices on the different boards.

Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 hw/arm/aspeed.c | 49 +++++++++++++++++++++++++++----------------------
 1 file changed, 27 insertions(+), 22 deletions(-)

diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index f71a5d87473f..11558b327bc9 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -533,6 +533,12 @@ static void romulus_bmc_i2c_init(AspeedMachineState *bmc)
     i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
 }
 
+static void create_pca9552(AspeedSoCState *soc, int bus_id, int addr)
+{
+    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, bus_id),
+                            TYPE_PCA9552, addr);
+}
+
 static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc)
 {
     AspeedSoCState *soc = &bmc->soc;
@@ -549,9 +555,9 @@ static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc)
     smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 4), 0x54,
                           eeprom4_54);
     /* PCA9539 @ 0x76, but PCA9552 is compatible */
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x76);
+    create_pca9552(soc, 4, 0x76);
     /* PCA9539 @ 0x77, but PCA9552 is compatible */
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x77);
+    create_pca9552(soc, 4, 0x77);
 
     /* bus 6 : */
     i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x48);
@@ -562,8 +568,8 @@ static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc)
     uint8_t *eeprom8_56 = g_malloc0(8 * 1024);
     smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 8), 0x56,
                           eeprom8_56);
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60);
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x61);
+    create_pca9552(soc, 8, 0x60);
+    create_pca9552(soc, 8, 0x61);
     /* bus 8 : adc128d818 @ 0x1d */
     /* bus 8 : adc128d818 @ 0x1f */
 
@@ -701,8 +707,7 @@ static void fp5280g2_bmc_i2c_init(AspeedMachineState *bmc)
     i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "ds1338", 0x68);
 
     /* It expects a pca9555 but a pca9552 is compatible */
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), TYPE_PCA9552,
-                     0x20);
+    create_pca9552(soc, 8, 0x30);
 }
 
 static void rainier_bmc_i2c_init(AspeedMachineState *bmc)
@@ -712,7 +717,7 @@ static void rainier_bmc_i2c_init(AspeedMachineState *bmc)
 
     aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 0), 0x51, 32 * KiB);
 
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3), "pca9552", 0x61);
+    create_pca9552(soc, 3, 0x61);
 
     /* The rainier expects a TMP275 but a TMP105 is compatible */
     i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), TYPE_TMP105,
@@ -726,14 +731,14 @@ static void rainier_bmc_i2c_init(AspeedMachineState *bmc)
     aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 0), 0x50, 64 * KiB);
     aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x51, 64 * KiB);
     aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 2), 0x52, 64 * KiB);
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x60);
+    create_pca9552(soc, 4, 0x60);
 
     i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), TYPE_TMP105,
                      0x48);
     i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), TYPE_TMP105,
                      0x49);
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), "pca9552", 0x60);
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), "pca9552", 0x61);
+    create_pca9552(soc, 5, 0x60);
+    create_pca9552(soc, 5, 0x61);
     i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5),
                                       "pca9546", 0x70);
     aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 0), 0x50, 64 * KiB);
@@ -752,13 +757,13 @@ static void rainier_bmc_i2c_init(AspeedMachineState *bmc)
     aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 2), 0x50, 64 * KiB);
     aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 3), 0x51, 64 * KiB);
 
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x30);
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x31);
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x32);
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x33);
+    create_pca9552(soc, 7, 0x30);
+    create_pca9552(soc, 7, 0x31);
+    create_pca9552(soc, 7, 0x32);
+    create_pca9552(soc, 7, 0x33);
     /* Bus 7: TODO max31785@52 */
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x60);
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x61);
+    create_pca9552(soc, 7, 0x60);
+    create_pca9552(soc, 7, 0x61);
     i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "dps310", 0x76);
     /* Bus 7: TODO si7021-a20@20 */
     i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), TYPE_TMP105,
@@ -772,8 +777,8 @@ static void rainier_bmc_i2c_init(AspeedMachineState *bmc)
                      0x4a);
     aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 8), 0x50, 64 * KiB);
     aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 8), 0x51, 64 * KiB);
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60);
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x61);
+    create_pca9552(soc, 8, 0x60);
+    create_pca9552(soc, 8, 0x61);
     /* Bus 8: ucd90320@11 */
     /* Bus 8: ucd90320@b */
     /* Bus 8: ucd90320@c */
@@ -794,17 +799,17 @@ static void rainier_bmc_i2c_init(AspeedMachineState *bmc)
                                       "pca9546", 0x70);
     aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 0), 0x50, 64 * KiB);
     aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x51, 64 * KiB);
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "pca9552", 0x60);
+    create_pca9552(soc, 11, 0x60);
 
 
     aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 13), 0x50, 64 * KiB);
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 13), "pca9552", 0x60);
+    create_pca9552(soc, 13, 0x60);
 
     aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 14), 0x50, 64 * KiB);
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 14), "pca9552", 0x60);
+    create_pca9552(soc, 14, 0x60);
 
     aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 15), 0x50, 64 * KiB);
-    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 15), "pca9552", 0x60);
+    create_pca9552(soc, 15, 0x60);
 }
 
 static void get_pca9548_channels(I2CBus *bus, uint8_t mux_addr,
-- 
2.34.1

Re: [PATCH v2 5/7] aspeed: Introduce a create_pca9552() helper

[Philippe Mathieu-Daudé via]

On 18/2/22 09:18, Cédric Le Goater wrote:
> This unifies the way we create the pca9552 devices on the different boards.
> 
> Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> Signed-off-by: Cédric Le Goater <clg@kaod.org>
> ---
>   hw/arm/aspeed.c | 49 +++++++++++++++++++++++++++----------------------
>   1 file changed, 27 insertions(+), 22 deletions(-)

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

Re: [PATCH v2 5/7] aspeed: Introduce a create_pca9552() helper

[Philippe Mathieu-Daudé via]

On 18/2/22 09:18, Cédric Le Goater wrote:
> This unifies the way we create the pca9552 devices on the different boards.
> 
> Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> Signed-off-by: Cédric Le Goater <clg@kaod.org>
> ---
>   hw/arm/aspeed.c | 49 +++++++++++++++++++++++++++----------------------
>   1 file changed, 27 insertions(+), 22 deletions(-)
> 
> diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
> index f71a5d87473f..11558b327bc9 100644
> --- a/hw/arm/aspeed.c
> +++ b/hw/arm/aspeed.c
> @@ -533,6 +533,12 @@ static void romulus_bmc_i2c_init(AspeedMachineState *bmc)
>       i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
>   }
>   
> +static void create_pca9552(AspeedSoCState *soc, int bus_id, int addr)
> +{
> +    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, bus_id),
> +                            TYPE_PCA9552, addr);
> +}

Hmm in case you respin, this is an opportunity to return the I2CSlave*
pointer here.

[PATCH v2 6/7] aspeed/smc: Add an address mask on segment registers

[Cédric Le Goater]

Only a limited set of bits are used for decoding the Start and End
addresses of the mapping window of a flash device.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 include/hw/ssi/aspeed_smc.h |  1 +
 hw/ssi/aspeed_smc.c         | 11 +++++++++++
 2 files changed, 12 insertions(+)

diff --git a/include/hw/ssi/aspeed_smc.h b/include/hw/ssi/aspeed_smc.h
index e26555581996..cad73ddc13f2 100644
--- a/include/hw/ssi/aspeed_smc.h
+++ b/include/hw/ssi/aspeed_smc.h
@@ -99,6 +99,7 @@ struct AspeedSMCClass {
     uint8_t max_peripherals;
     const uint32_t *resets;
     const AspeedSegments *segments;
+    uint32_t segment_addr_mask;
     hwaddr flash_window_base;
     uint32_t flash_window_size;
     uint32_t features;
diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c
index ff154eb84f85..d899be17fd71 100644
--- a/hw/ssi/aspeed_smc.c
+++ b/hw/ssi/aspeed_smc.c
@@ -259,6 +259,10 @@ static void aspeed_smc_flash_set_segment_region(AspeedSMCState *s, int cs,
     memory_region_set_enabled(&fl->mmio, !!seg.size);
     memory_region_transaction_commit();
 
+    if (asc->segment_addr_mask) {
+        regval &= asc->segment_addr_mask;
+    }
+
     s->regs[R_SEG_ADDR0 + cs] = regval;
 }
 
@@ -1364,6 +1368,7 @@ static void aspeed_2400_fmc_class_init(ObjectClass *klass, void *data)
     asc->conf_enable_w0    = CONF_ENABLE_W0;
     asc->max_peripherals   = 5;
     asc->segments          = aspeed_2400_fmc_segments;
+    asc->segment_addr_mask = 0xffff0000;
     asc->resets            = aspeed_2400_fmc_resets;
     asc->flash_window_base = 0x20000000;
     asc->flash_window_size = 0x10000000;
@@ -1446,6 +1451,7 @@ static void aspeed_2500_fmc_class_init(ObjectClass *klass, void *data)
     asc->conf_enable_w0    = CONF_ENABLE_W0;
     asc->max_peripherals   = 3;
     asc->segments          = aspeed_2500_fmc_segments;
+    asc->segment_addr_mask = 0xffff0000;
     asc->resets            = aspeed_2500_fmc_resets;
     asc->flash_window_base = 0x20000000;
     asc->flash_window_size = 0x10000000;
@@ -1483,6 +1489,7 @@ static void aspeed_2500_spi1_class_init(ObjectClass *klass, void *data)
     asc->conf_enable_w0    = CONF_ENABLE_W0;
     asc->max_peripherals   = 2;
     asc->segments          = aspeed_2500_spi1_segments;
+    asc->segment_addr_mask = 0xffff0000;
     asc->flash_window_base = 0x30000000;
     asc->flash_window_size = 0x8000000;
     asc->features          = 0x0;
@@ -1517,6 +1524,7 @@ static void aspeed_2500_spi2_class_init(ObjectClass *klass, void *data)
     asc->conf_enable_w0    = CONF_ENABLE_W0;
     asc->max_peripherals   = 2;
     asc->segments          = aspeed_2500_spi2_segments;
+    asc->segment_addr_mask = 0xffff0000;
     asc->flash_window_base = 0x38000000;
     asc->flash_window_size = 0x8000000;
     asc->features          = 0x0;
@@ -1598,6 +1606,7 @@ static void aspeed_2600_fmc_class_init(ObjectClass *klass, void *data)
     asc->conf_enable_w0    = CONF_ENABLE_W0;
     asc->max_peripherals   = 3;
     asc->segments          = aspeed_2600_fmc_segments;
+    asc->segment_addr_mask = 0x0ff00ff0;
     asc->resets            = aspeed_2600_fmc_resets;
     asc->flash_window_base = 0x20000000;
     asc->flash_window_size = 0x10000000;
@@ -1636,6 +1645,7 @@ static void aspeed_2600_spi1_class_init(ObjectClass *klass, void *data)
     asc->conf_enable_w0    = CONF_ENABLE_W0;
     asc->max_peripherals   = 2;
     asc->segments          = aspeed_2600_spi1_segments;
+    asc->segment_addr_mask = 0x0ff00ff0;
     asc->flash_window_base = 0x30000000;
     asc->flash_window_size = 0x10000000;
     asc->features          = ASPEED_SMC_FEATURE_DMA |
@@ -1674,6 +1684,7 @@ static void aspeed_2600_spi2_class_init(ObjectClass *klass, void *data)
     asc->conf_enable_w0    = CONF_ENABLE_W0;
     asc->max_peripherals   = 3;
     asc->segments          = aspeed_2600_spi2_segments;
+    asc->segment_addr_mask = 0x0ff00ff0;
     asc->flash_window_base = 0x50000000;
     asc->flash_window_size = 0x10000000;
     asc->features          = ASPEED_SMC_FEATURE_DMA |
-- 
2.34.1

[PATCH v2 7/7] aspeed/sdmc: Add trace events

[Cédric Le Goater]

This is useful to analyze changes in the U-Boot RAM driver when SDRAM
training is performed.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 hw/misc/aspeed_sdmc.c | 2 ++
 hw/misc/trace-events  | 4 ++++
 2 files changed, 6 insertions(+)

diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c
index 08f856cbda7e..d2a3931033b3 100644
--- a/hw/misc/aspeed_sdmc.c
+++ b/hw/misc/aspeed_sdmc.c
@@ -130,6 +130,7 @@ static uint64_t aspeed_sdmc_read(void *opaque, hwaddr addr, unsigned size)
         return 0;
     }
 
+    trace_aspeed_sdmc_read(addr, s->regs[addr]);
     return s->regs[addr];
 }
 
@@ -148,6 +149,7 @@ static void aspeed_sdmc_write(void *opaque, hwaddr addr, uint64_t data,
         return;
     }
 
+    trace_aspeed_sdmc_write(addr, data);
     asc->write(s, addr, data);
 }
 
diff --git a/hw/misc/trace-events b/hw/misc/trace-events
index 1c373dd0a4c5..c3fc9fecbe34 100644
--- a/hw/misc/trace-events
+++ b/hw/misc/trace-events
@@ -205,6 +205,10 @@ aspeed_i3c_write(uint64_t offset, uint64_t data) "I3C write: offset 0x%" PRIx64
 aspeed_i3c_device_read(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] read: offset 0x%" PRIx64 " data 0x%" PRIx64
 aspeed_i3c_device_write(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64
 
+# aspeed_sdmc.c
+aspeed_sdmc_write(uint32_t reg, uint32_t data) "reg @0x%" PRIx32 " data: 0x%" PRIx32
+aspeed_sdmc_read(uint32_t reg, uint32_t data) "reg @0x%" PRIx32 " data: 0x%" PRIx32
+
 # bcm2835_property.c
 bcm2835_mbox_property(uint32_t tag, uint32_t bufsize, size_t resplen) "mbox property tag:0x%08x in_sz:%u out_sz:%zu"
 
-- 
2.34.1

Re: [PATCH v2 7/7] aspeed/sdmc: Add trace events

[Philippe Mathieu-Daudé via]

On 18/2/22 09:18, Cédric Le Goater wrote:
> This is useful to analyze changes in the U-Boot RAM driver when SDRAM
> training is performed.
> 
> Signed-off-by: Cédric Le Goater <clg@kaod.org>
> ---
>   hw/misc/aspeed_sdmc.c | 2 ++
>   hw/misc/trace-events  | 4 ++++
>   2 files changed, 6 insertions(+)
> 
> diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c
> index 08f856cbda7e..d2a3931033b3 100644
> --- a/hw/misc/aspeed_sdmc.c
> +++ b/hw/misc/aspeed_sdmc.c
> @@ -130,6 +130,7 @@ static uint64_t aspeed_sdmc_read(void *opaque, hwaddr addr, unsigned size)
>           return 0;
>       }

> +# aspeed_sdmc.c
> +aspeed_sdmc_write(uint32_t reg, uint32_t data) "reg @0x%" PRIx32 " data: 0x%" PRIx32
> +aspeed_sdmc_read(uint32_t reg, uint32_t data) "reg @0x%" PRIx32 " data: 0x%" PRIx32

I'm surprised by the uint32_t conversion, but why not.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

Re: [PATCH v2 7/7] aspeed/sdmc: Add trace events

[Cédric Le Goater]

On 2/18/22 18:56, Philippe Mathieu-Daudé wrote:
> On 18/2/22 09:18, Cédric Le Goater wrote:
>> This is useful to analyze changes in the U-Boot RAM driver when SDRAM
>> training is performed.
>>
>> Signed-off-by: Cédric Le Goater <clg@kaod.org>
>> ---
>>   hw/misc/aspeed_sdmc.c | 2 ++
>>   hw/misc/trace-events  | 4 ++++
>>   2 files changed, 6 insertions(+)
>>
>> diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c
>> index 08f856cbda7e..d2a3931033b3 100644
>> --- a/hw/misc/aspeed_sdmc.c
>> +++ b/hw/misc/aspeed_sdmc.c
>> @@ -130,6 +130,7 @@ static uint64_t aspeed_sdmc_read(void *opaque, hwaddr addr, unsigned size)
>>           return 0;
>>       }
> 
>> +# aspeed_sdmc.c
>> +aspeed_sdmc_write(uint32_t reg, uint32_t data) "reg @0x%" PRIx32 " data: 0x%" PRIx32
>> +aspeed_sdmc_read(uint32_t reg, uint32_t data) "reg @0x%" PRIx32 " data: 0x%" PRIx32
> 
> I'm surprised by the uint32_t conversion, but why not.
> 
> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

Indeed. I might change that.

Thanks !

C.

Re: [PATCH v2 0/7] aspeed extensions

[Cédric Le Goater]

Peter,

On 2/18/22 09:18, Cédric Le Goater wrote:
> Hi,
> 
> Here is a set of extensions for the Aspeed machines, the most
> important ones being the removal of a deprecated machine and a simple
> model for the Secure Boot Controller, both from Joel.

I have a PR ready to be sent if there are no further comments.

Thanks,

C.