qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Xu <peterx@redhat.com>
To: qemu-devel@nongnu.org
Cc: Juan Quintela <quintela@redhat.com>,
	"Dr . David Alan Gilbert" <dgilbert@redhat.com>,
	peterx@redhat.com,
	Leonardo Bras Soares Passos <lsoaresp@redhat.com>
Subject: [PATCH v2 02/25] migration: Finer grained tracepoints for POSTCOPY_LISTEN
Date: Tue,  1 Mar 2022 16:39:02 +0800	[thread overview]
Message-ID: <20220301083925.33483-3-peterx@redhat.com> (raw)
In-Reply-To: <20220301083925.33483-1-peterx@redhat.com>

The enablement of postcopy listening has a few steps, add a few tracepoints to
be there ready for some basic measurements for them.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
---
 migration/savevm.c     | 9 ++++++++-
 migration/trace-events | 2 +-
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/migration/savevm.c b/migration/savevm.c
index 7bb65e1d61..190cc5fc42 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -1948,9 +1948,10 @@ static void *postcopy_ram_listen_thread(void *opaque)
 static int loadvm_postcopy_handle_listen(MigrationIncomingState *mis)
 {
     PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_LISTENING);
-    trace_loadvm_postcopy_handle_listen();
     Error *local_err = NULL;
 
+    trace_loadvm_postcopy_handle_listen("enter");
+
     if (ps != POSTCOPY_INCOMING_ADVISE && ps != POSTCOPY_INCOMING_DISCARD) {
         error_report("CMD_POSTCOPY_LISTEN in wrong postcopy state (%d)", ps);
         return -1;
@@ -1965,6 +1966,8 @@ static int loadvm_postcopy_handle_listen(MigrationIncomingState *mis)
         }
     }
 
+    trace_loadvm_postcopy_handle_listen("after discard");
+
     /*
      * Sensitise RAM - can now generate requests for blocks that don't exist
      * However, at this point the CPU shouldn't be running, and the IO
@@ -1977,6 +1980,8 @@ static int loadvm_postcopy_handle_listen(MigrationIncomingState *mis)
         }
     }
 
+    trace_loadvm_postcopy_handle_listen("after uffd");
+
     if (postcopy_notify(POSTCOPY_NOTIFY_INBOUND_LISTEN, &local_err)) {
         error_report_err(local_err);
         return -1;
@@ -1991,6 +1996,8 @@ static int loadvm_postcopy_handle_listen(MigrationIncomingState *mis)
     qemu_sem_wait(&mis->listen_thread_sem);
     qemu_sem_destroy(&mis->listen_thread_sem);
 
+    trace_loadvm_postcopy_handle_listen("return");
+
     return 0;
 }
 
diff --git a/migration/trace-events b/migration/trace-events
index 123cfe79d7..92596c00d8 100644
--- a/migration/trace-events
+++ b/migration/trace-events
@@ -14,7 +14,7 @@ loadvm_handle_cmd_packaged_main(int ret) "%d"
 loadvm_handle_cmd_packaged_received(int ret) "%d"
 loadvm_handle_recv_bitmap(char *s) "%s"
 loadvm_postcopy_handle_advise(void) ""
-loadvm_postcopy_handle_listen(void) ""
+loadvm_postcopy_handle_listen(const char *str) "%s"
 loadvm_postcopy_handle_run(void) ""
 loadvm_postcopy_handle_run_cpu_sync(void) ""
 loadvm_postcopy_handle_run_vmstart(void) ""
-- 
2.32.0



  parent reply	other threads:[~2022-03-01  8:42 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-01  8:39 [PATCH v2 00/25] migration: Postcopy Preemption Peter Xu
2022-03-01  8:39 ` [PATCH v2 01/25] migration: Dump sub-cmd name in loadvm_process_command tp Peter Xu
2022-03-01  8:39 ` Peter Xu [this message]
2022-03-01  8:39 ` [PATCH v2 03/25] migration: Tracepoint change in postcopy-run bottom half Peter Xu
2022-03-01  8:39 ` [PATCH v2 04/25] migration: Introduce postcopy channels on dest node Peter Xu
2022-03-01  8:39 ` [PATCH v2 05/25] migration: Dump ramblock and offset too when non-same-page detected Peter Xu
2022-03-01  8:39 ` [PATCH v2 06/25] migration: Add postcopy_thread_create() Peter Xu
2022-03-01  8:39 ` [PATCH v2 07/25] migration: Move static var in ram_block_from_stream() into global Peter Xu
2022-03-01  8:39 ` [PATCH v2 08/25] migration: Add pss.postcopy_requested status Peter Xu
2022-03-01  8:39 ` [PATCH v2 09/25] migration: Move migrate_allow_multifd and helpers into migration.c Peter Xu
2022-03-01  8:39 ` [PATCH v2 10/25] migration: Enlarge postcopy recovery to capture !-EIO too Peter Xu
2022-03-01  8:39 ` [PATCH v2 11/25] migration: postcopy_pause_fault_thread() never fails Peter Xu
2022-03-01  8:39 ` [PATCH v2 12/25] migration: Export ram_load_postcopy() Peter Xu
2022-03-01  8:39 ` [PATCH v2 13/25] migration: Move channel setup out of postcopy_try_recover() Peter Xu
2022-03-01  8:39 ` [PATCH v2 14/25] migration: Add migration_incoming_transport_cleanup() Peter Xu
2022-03-01  8:39 ` [PATCH v2 15/25] migration: Allow migrate-recover to run multiple times Peter Xu
2022-03-01  8:39 ` [PATCH v2 16/25] migration: Add postcopy-preempt capability Peter Xu
2022-03-01  8:39 ` [PATCH v2 17/25] migration: Postcopy preemption preparation on channel creation Peter Xu
2022-03-01  8:39 ` [PATCH v2 18/25] migration: Postcopy preemption enablement Peter Xu
2022-03-01  8:39 ` [PATCH v2 19/25] migration: Postcopy recover with preempt enabled Peter Xu
2022-03-01  8:39 ` [PATCH v2 20/25] migration: Create the postcopy preempt channel asynchronously Peter Xu
2022-03-01  8:39 ` [PATCH v2 21/25] migration: Parameter x-postcopy-preempt-break-huge Peter Xu
2022-03-01  8:39 ` [PATCH v2 22/25] migration: Add helpers to detect TLS capability Peter Xu
2022-03-01  8:39 ` [PATCH v2 23/25] migration: Fail postcopy preempt with TLS for now Peter Xu
2022-03-01  8:39 ` [PATCH v2 24/25] tests: Add postcopy preempt test Peter Xu
2022-03-01  8:39 ` [PATCH v2 25/25] tests: Pass in MigrateStart** into test_migrate_start() Peter Xu
2022-03-02 12:11   ` Dr. David Alan Gilbert
2022-03-01  9:25 ` [PATCH v2 00/25] migration: Postcopy Preemption Daniel P. Berrangé
2022-03-01 10:17   ` Peter Xu
2022-03-01 10:27     ` Daniel P. Berrangé
2022-03-01 10:55       ` Peter Xu
2022-03-01 16:51         ` Dr. David Alan Gilbert
2022-03-02  1:46           ` Peter Xu
2022-03-14 18:49           ` Time to introduce a migration protocol negotiation (Re: [PATCH v2 00/25] migration: Postcopy Preemption) Daniel P. Berrangé
2022-03-15  6:13             ` Peter Xu
2022-03-15 11:15               ` Daniel P. Berrangé
2022-03-16  3:30                 ` Peter Xu
2022-03-16  9:59                   ` Daniel P. Berrangé
2022-03-16 10:40                     ` Peter Xu
2022-03-16 11:00                       ` Daniel P. Berrangé
2022-03-18  7:08                         ` Peter Xu
2022-03-15 10:43             ` Dr. David Alan Gilbert
2022-03-15 11:05               ` Daniel P. Berrangé
2022-03-01 18:05         ` [PATCH v2 00/25] migration: Postcopy Preemption Daniel P. Berrangé
2022-03-02  1:48           ` Peter Xu
2022-03-02 12:14 ` Dr. David Alan Gilbert
2022-03-02 12:34   ` Peter Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220301083925.33483-3-peterx@redhat.com \
    --to=peterx@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=lsoaresp@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).