From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Stefan Hajnoczi <stefanha@redhat.com>,
Sergio Lopez <slp@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>
Subject: [PULL 42/45] event_notifier: add event_notifier_get_wfd()
Date: Fri, 4 Mar 2022 08:42:38 -0500 [thread overview]
Message-ID: <20220304133556.233983-43-mst@redhat.com> (raw)
In-Reply-To: <20220304133556.233983-1-mst@redhat.com>
From: Sergio Lopez <slp@redhat.com>
event_notifier_get_fd(const EventNotifier *e) always returns
EventNotifier's read file descriptor (rfd). This is not a problem when
the EventNotifier is backed by a an eventfd, as a single file
descriptor is used both for reading and triggering events (rfd ==
wfd).
But, when EventNotifier is backed by a pipe pair, we have two file
descriptors, one that can only be used for reads (rfd), and the other
only for writes (wfd).
There's, at least, one known situation in which we need to obtain wfd
instead of rfd, which is when setting up the file that's going to be
sent to the peer in vhost's SET_VRING_CALL.
Add a new event_notifier_get_wfd(const EventNotifier *e) that can be
used to obtain wfd where needed.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20220303115911.20962-2-slp@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
include/qemu/event_notifier.h | 1 +
util/event_notifier-posix.c | 5 +++++
2 files changed, 6 insertions(+)
diff --git a/include/qemu/event_notifier.h b/include/qemu/event_notifier.h
index b79add035d..8a4ff308e1 100644
--- a/include/qemu/event_notifier.h
+++ b/include/qemu/event_notifier.h
@@ -38,6 +38,7 @@ int event_notifier_test_and_clear(EventNotifier *);
#ifdef CONFIG_POSIX
void event_notifier_init_fd(EventNotifier *, int fd);
int event_notifier_get_fd(const EventNotifier *);
+int event_notifier_get_wfd(const EventNotifier *);
#else
HANDLE event_notifier_get_handle(EventNotifier *);
#endif
diff --git a/util/event_notifier-posix.c b/util/event_notifier-posix.c
index 8307013c5d..16294e98d4 100644
--- a/util/event_notifier-posix.c
+++ b/util/event_notifier-posix.c
@@ -99,6 +99,11 @@ int event_notifier_get_fd(const EventNotifier *e)
return e->rfd;
}
+int event_notifier_get_wfd(const EventNotifier *e)
+{
+ return e->wfd;
+}
+
int event_notifier_set(EventNotifier *e)
{
static const uint64_t value = 1;
--
MST
next prev parent reply other threads:[~2022-03-04 14:50 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-04 13:36 [PULL 00/45] virtio,pc,pci: features, cleanups, fixes Michael S. Tsirkin
2022-03-04 13:37 ` [PULL 01/45] qom: assert integer does not overflow Michael S. Tsirkin
2022-03-04 13:37 ` [PULL 02/45] ACPI ERST: specification for ERST support Michael S. Tsirkin
2022-03-04 13:37 ` [PULL 03/45] MAINTAINERS: no need to add my name explicitly as a reviewer for VIOT tables Michael S. Tsirkin
2022-03-04 13:37 ` [PULL 04/45] docs/acpi/erst: add device id for ACPI ERST device in pci-ids.txt Michael S. Tsirkin
2022-03-04 13:37 ` [PULL 05/45] hw/acpi/erst: clean up unused IS_UEFI_CPER_RECORD macro Michael S. Tsirkin
2022-03-04 13:37 ` [PULL 06/45] hw/smbios: code cleanup - use macro definitions for table header handles Michael S. Tsirkin
2022-03-04 13:38 ` [PULL 07/45] hw/smbios: fix overlapping table handle numbers with large memory vms Michael S. Tsirkin
2022-03-04 13:38 ` [PULL 08/45] hw/smbios: add assertion to ensure handles of tables 19 and 32 do not collide Michael S. Tsirkin
2022-03-04 13:38 ` [PULL 09/45] vhost-user: remove VirtQ notifier restore Michael S. Tsirkin
2022-03-04 13:38 ` [PULL 10/45] vhost-user: fix VirtQ notifier cleanup Michael S. Tsirkin
2022-03-04 13:38 ` [PULL 11/45] virtio: fix the condition for iommu_platform not supported Michael S. Tsirkin
2022-03-04 13:38 ` [PULL 12/45] hw/vhost-user-i2c: Add support for VIRTIO_I2C_F_ZERO_LENGTH_REQUEST Michael S. Tsirkin
2022-03-04 13:39 ` [PULL 13/45] tests/qtest/libqos/pci: Introduce pio_limit Michael S. Tsirkin
2022-03-04 13:39 ` [PULL 14/45] tests/qtest/libqos: Skip hotplug tests if pci root bus is not hotpluggable Michael S. Tsirkin
2022-03-04 13:39 ` [PULL 15/45] tests/qtest/vhost-user-blk-test: Temporary hack to get tests passing on aarch64 Michael S. Tsirkin
2022-03-04 13:39 ` [PULL 16/45] tests/qtest/libqos: Add generic pci host bridge in arm-virt machine Michael S. Tsirkin
2022-03-07 10:02 ` Michael S. Tsirkin
2022-03-07 11:07 ` Eric Auger
2022-03-04 13:39 ` [PULL 17/45] hw/virtio: vdpa: Fix leak of host-notifier memory-region Michael S. Tsirkin
2022-03-04 13:39 ` [PULL 18/45] vhost-vdpa: make notifiers _init()/_uninit() symmetric Michael S. Tsirkin
2022-03-04 13:39 ` [PULL 19/45] intel_iommu: support snoop control Michael S. Tsirkin
2022-03-04 13:39 ` [PULL 20/45] hw/i386: Improve bounds checking in OVMF table parsing Michael S. Tsirkin
2022-03-04 13:40 ` [PULL 21/45] hw/i386: Replace magic number with field length calculation Michael S. Tsirkin
2022-03-04 13:40 ` [PULL 22/45] virtio-iommu: Default to bypass during boot Michael S. Tsirkin
2022-03-04 13:40 ` [PULL 23/45] virtio-iommu: Support bypass domain Michael S. Tsirkin
2022-03-04 13:40 ` [PULL 24/45] tests/qtest/virtio-iommu-test: Check bypass config Michael S. Tsirkin
2022-03-04 13:40 ` [PULL 25/45] hw/i386/pc_piix: Mark the machine types from version 1.4 to 1.7 as deprecated Michael S. Tsirkin
2022-03-04 13:40 ` [PULL 26/45] hw/pci-bridge/pxb: Fix missing swizzle Michael S. Tsirkin
2022-03-04 13:40 ` [PULL 27/45] virtio-net: Unlimit tx queue size if peer is vdpa Michael S. Tsirkin
2022-03-04 13:40 ` [PULL 28/45] pcie: Add support for Single Root I/O Virtualization (SR/IOV) Michael S. Tsirkin
2022-03-04 13:40 ` [PULL 29/45] pcie: Add some SR/IOV API documentation in docs/pcie_sriov.txt Michael S. Tsirkin
2022-03-04 13:40 ` [PULL 30/45] pcie: Add a helper to the SR/IOV API Michael S. Tsirkin
2022-03-04 13:41 ` [PULL 31/45] pcie: Add 1.2 version token for the Power Management Capability Michael S. Tsirkin
2022-03-04 13:41 ` [PULL 32/45] pci-bridge/xio3130_upstream: Fix error handling Michael S. Tsirkin
2022-03-04 13:41 ` [PULL 33/45] pci-bridge/xio3130_downstream: " Michael S. Tsirkin
2022-03-04 13:41 ` [PULL 34/45] headers: Add pvpanic.h Michael S. Tsirkin
2022-03-04 13:41 ` [PULL 35/45] hw/misc/pvpanic: Use standard headers instead Michael S. Tsirkin
2022-03-04 13:41 ` [PULL 36/45] pci: show id info when pci BDF conflict Michael S. Tsirkin
2022-03-04 13:42 ` [PULL 37/45] pci: expose TYPE_XIO3130_DOWNSTREAM name Michael S. Tsirkin
2022-03-04 13:42 ` [PULL 38/45] acpi: pcihp: pcie: set power on cap on parent slot Michael S. Tsirkin
2022-03-04 13:42 ` [PULL 39/45] pc: add option to disable PS/2 mouse/keyboard Michael S. Tsirkin
2022-03-04 13:42 ` [PULL 40/45] vhost-vsock: detach the virqueue element in case of error Michael S. Tsirkin
2022-03-04 13:42 ` [PULL 41/45] x86: cleanup unused compat_apic_id_mode Michael S. Tsirkin
2022-03-04 13:42 ` Michael S. Tsirkin [this message]
2022-03-04 13:42 ` [PULL 43/45] vhost: use wfd on functions setting vring call fd Michael S. Tsirkin
2022-03-04 13:42 ` [PULL 44/45] configure, meson: allow enabling vhost-user on all POSIX systems Michael S. Tsirkin
2022-03-04 13:42 ` [PULL 45/45] docs: vhost-user: add subsection for non-Linux platforms Michael S. Tsirkin
2022-03-04 22:13 ` [PULL 00/45] virtio,pc,pci: features, cleanups, fixes Peter Maydell
2022-03-06 10:37 ` Michael S. Tsirkin
2022-03-07 10:48 ` Eric Auger
2022-03-07 11:55 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220304133556.233983-43-mst@redhat.com \
--to=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=slp@redhat.com \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).